Copper electroplating and electrode patterning using a screen printer are applied instead of lithography for heterostructure with intrinsic thin layer(HIT) silicon solar cells. Samples are patterned on an indium tin oxide(ITO) layer using polymer resist printing. After polymer resist patterning, a Ni seed layer is deposited by sputtering. A Cu electrode is electroplated in a Cu bath consisting of Cu2SO4 and H2SO4 at a current density of 10 mA/cm2. Copper electroplating electrodes using a screen printer are successfully implemented to a line width of about 80 μm. The contact resistance of the copper electrode is 0.89 mΩ·cm2, measured using the transmission line method(TLM), and the sheet resistance of the copper electrode and ITO are 1 Ω/□ and 40 Ω/□, respectively. In this paper, a screen printer is used to form a solar cell electrode pattern, and a copper electrode is formed by electroplating instead of using a silver electrode to fabricate an efficient solar cell electrode at low cost.

일반적으로 전기변색소자들은 전기변색물질, 전해질 그리고 상대전극물질로 구성되어 있다. 그 중에서, 상대전극물질은 소자의 장기전환 안정성 및 낮은 작동 전압 등과 같은 전기변색소자들의 성능을 향상하는데 매우 중요하다. 본 연구에서는 다이메틸 프탈레이트 기반 전기변색소자에 페로센과 카본 전극을 적용하고 그 성능을 테스트 하였다. 특히 카본 전극에서 우수한 장기전환 안정성이 구현되었다.

We report on stretchable electrochromic films of poly(3-hexylthiophene) (P3HT) fabricated on silver nanowire (AgNW) electrodes. AgNWs electrodes are prepared on polydimethylsiloxane (PDMS) substrates using a spray coater for stretchable electrochromic applications. On top of the AgNW electrode, poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) is introduced to ensure a stable resistance over the electrode under broad strain range by effectively suppressing the protrusion of AgNWs from PDMS. This bilayer electrode exhibits a high performance as a stretchable substrate in terms of sheet resistance increment by a factor of 1.6, tensile strain change to 40%, and stretching cycles to 100 cycles. Furthermore, P3HT film spin-coated on the bilayer electrode shows a stable electrochromic coloration within an applied voltage, with a color contrast of 28.6%, response time of 4-5 sec, and a coloration efficiency of 91.0 cm2/C. These findings indicate that AgNWs/PEDOT:PSS bilayer on PDMS substrate electrode is highly suitable for transparent and stretchable electrochromic devices.

Graphene is a single atomic layer of carbon atoms, and has exceptional electrical, mechanical, and optical characteristics. It has been broadly utilized in the fields of material science, physics, chemistry, device fabrication, information, and biology. In this review paper, we briefly investigate the ideas, structure, characteristics, and fabrication techniques for graphene applications in lithium ion batteries (LIBs). In LIBs, a constant three-dimensional (3D) conductive system can adequately enhance the transportation of electrons and ions of the electrode material. The use of 3D graphene and graphene-expansion electrode materials can significantly upgrade LIBs characteristics to give higher electric conductivity, greater capacity, and good stability. This review demonstrates several recent advances in graphenecontaining LIB electrode materials, and addresses probable trends into the future.

본 연구에서는 무전해도금법을 이용한 Pd coating 기술을 활용하여 폐수처리를 위한 전기분해 공정에 anode로의 적용을 목적으로 Ti-mesh 기반 전극을 제조하였다. 제조된 Pd/Ti-mesh 전극은 염색염료인 RO16을 대표로 그 제거성능을 평가하였으며, 전극 제조조건을 다르게 하여 내구성 및 성능을 극대화한 결과 coating 조건은 성능에 크게 영향을 미치지 않았지만, Pd coating 후 열처리 공정의 경우 성능에 크게 영향을 미쳤으며, 내구성 역시 증진됨을 확인하였다. 또한 Ir, Ru, Ta을 복합화하여 성능 및 내구성을 극대화하고자 하였으나, coating법의 한계로 layer의 thickness가 증가함에 따라 저항이 커졌으며, 이에 따라 성능이 감소함을 확인하였다.

본 연구에서는 탄소 나노재료 중 환원된 그래핀 옥사이드와 전도성 고분자중 폴리아닐린을 복합화 하여 슈퍼커패시터용 전극을 제조하였으며, 각각의 전극 재료가 가지는 단점을 서로 보완하고 장점을 극대화시킴으로써 전극의 전기화학적 특성을 크게 향상 시킬 수 있었다. 전극 물질에 사용된 폴리아닐린은 아닐린 단량체를 화학 중합법으로 제조하였고, 환원된 그래핀 옥사이드는 별도의 전 처리 과정 없이 사용 하였으며, DMF(N,N-dimethyl formamide)를 용매로 도입하여 분산용액을 제조하였다. 분산용액은 금이 코팅된PET(Polyethylene terephthalate) 기판위에 산업적 스케일로 적용이 가능한 스프레이 코팅 방법을 이용하여 전극으로 제조하였다. 환원된 그래핀 옥사이드/폴리아닐린 복합재료를 기반으로 제조된 전극의 전기화학적 특성을 비교하기 위하여 환원된 그래핀 옥사이드와 폴리아닐린 단일 전극을 제조하였으며, 동일 한 조건하에서 순환전압전류법, 임피던스 분광법, 정전류 충·방전법을 통하여 각각의 전극이 나타내는 전기 화학적 특성을 비교·분석 하였다. 그 결과로, 환원된 그래핀 옥사이드/폴리아닐린 복합재료를 기반으로 제조된 전극은 폴리아닐린, 환원된 그래핀 옥사 단일 전극에 비하여 전기 용량 값이 높게 나타났으며, 전해질 계면과의 내부 저항은 폴리아닐린, 환원된 그래핀 옥사이드 단일 전극에 비하여 각각 24 %, 58 % 감소하는 결과를 나타내었다. 이러한 결과로 미루어보아 본 연구를 통하여 제조된 환원된 그래핀 옥사이드/폴리 아닐린 복합재료 기반의 전극은 유연성 에너지 저장 매체나 웨어러블 전자기기에 적용이 가능할 것으로 판단된다.

본 연구의 목적은 스마트 헬스케어를 위해 접촉식 직물전극의 구조가 심장활동 신호 획득에 미치는 영향을 연구하는 것이다. 본 연구에서는 심장활동 신호 측정을 위하여 전극의 크기와 구성방식을 조작한 6종의 접촉식 직물전극을 컴퓨터 자수 방식으로 구현하였고, 이를 가슴밴드에 부착하여 응용형 리드 II(modified Lead II) 방식으로 심장활동 신호를 검출하였다. 건강한 신체의 남성 4명을 대상으로 서서 정지한 자세에서 각 직물전극을 사용하여 심장활동 신호를 검출하였으며, 모든 유형의 전극에 걸쳐 4회씩 반복측정 하였다. 심장활동 신호의 수집을 위해 BIOPAC ECG100 장비를 사용하여 1 ㎑로 샘플링하였으며, 검출된 원 신호를 대역통과 필터를 사용하여 필터링하였다. 직물전극의 구조에 따른 심장활동 신호 획득의 성능을 비교하기 위하여 신호의 파형과 크기를 파라미터로 하여 정성적 분석을 실시하였고, 각 전극을 통하여 획득된 심장활동 신호의 SPR(signal power ratio)을 산출함으로써 정량적 분석을 실시하였다. 산출된 SPR 값을 대상으로 하여 비모수 통계분석 방식의 차이검정과 사후검정을 실시함으로써 6개 전극의 구조에 따른 심장활동 신호 획득의 성능 차이를 구체적으로 분석하였다. 연구 결과 접촉식 직물전극의 구조에 따라 심장활동 신호의 품질에는 정성적, 정량적 측면에 걸쳐 모두 주요한 차이가 있는 것이 고찰되었다. 접촉식 직물전극의 구성 측면에 있어서는 입체전극이 평면전극에 비해 더 우수한 품질의 신호가 검출되는 것으로 나타났다. 한편 3가지 전극 크기에 따른 심장활동 신호 획득의 유의한 성능 차이는 발견되지 않았다. 이러한 결과는 심장활동 신호 획득을 위한 접촉식 직물전극 구조의 두 가지 요건 중 구성방식(평면/입체)이 웨어러블 헬스케어를 위한 심장활동 신호 획득의 성능에 주요한 영향을 미치는 것을 시사한다. 본 연구 결과를 기반으로 후속 연구에서는 직물전극이 일체형으로 통합된 의복형 플랫폼을 구현하고 성능 고도화 방안을 연구함으로써, 시공간의 제약 없이 고품질의 심장활동 모니터링이 가능한 스마트 의류 기술을 개발하고자 한다.

In this study, a membrane electrode assembly(MEA) composed of three electrodes(anode, cathode, and reference electrode) is designed to investigate the effects of methanol concentration on the overpotentials of anode and cathode in direct methanol fuel cells(DMFCs). Using the three-electrode cell, in-situ analyses of the overpotentials are carried out during direct methanol fuel cell operation. It is demonstrated that the three-electrode cell can work effectively in transient state operating condition as well as in steady-state condition, and the anode and cathode exhibit different overpotential curves depending on the concentration of methanol used as fuel. Therefore, from the real-time separation of the anode and cathode overpotentials, it is possible to more clearly prove the methanol crossover effect, and it is expected that in-situ analysis using the three-electrode cell will provide an opportunity to obtain more diverse results in the area of fuel cell research.

A boron-doped diamond(BDD) electrode is attractive for many electrochemical applications due to its distinctive properties: an extremely wide potential window in aqueous and non-aqueous electrolytes, a very low and stable background current and a high resistance to surface fouling. An Ar gas mixture of H2, CH4 and trimethylboron (TMB, 0.1 % C3H9B in H2) is used in a hot filament chemical vapor deposition(HFCVD) reactor. The effect of argon addition on quality, structure and electrochemical property is investigated by scanning electron microscope(SEM), X-ray diffraction(XRD) and cyclic voltammetry(CV). In this study, BDD electrodes are manufactured using different Ar/CH4 ratios (Ar/CH4 = 0, 1, 2 and 4). The results of this study show that the diamond grain size decreases with increasing Ar/CH4 ratios. On the other hand, the samples with an Ar/CH4 ratio above 5 fail to produce a BDD electrode. In addition, the BDD electrodes manufactured by introducing different Ar/CH4 ratios result in the most inclined to (111) preferential growth when the Ar/CH4 ratio is 2. It is also noted that the electrochemical properties of the BDD electrode improve with the process of adding argon.

Hydrothermal synthesis of highly crystalline TiO2 nanorods is a well-developed technique and the nanorods have been widely used as the template for growth of various core-shell nanorod structures. Magneli/CdS core-shell nanorod structures are fabricated for the photoelectrochemical cell (PEC) electrode to achieve enhanced carrier transport along the metallic magneli phase nanorod template. However, the long and thin TiO2 nanorods may form a high resistance path to the electrons transferred from the CdS layer. TiO2 nanorods synthesized are reduced to magneli phases, TixO2x-1, by heat treatment in a hydrogen environment. Two types of magneli phase nanorods of Ti4O7 and Ti3O5 are synthesized. Structural morphology and X-ray diffraction analyses are carried out. CdS nano-films are deposited on the magneli nanorods for the main light absorption layer to form a photoanode, and the PEC performance is measured under simulated sunlight irradiation and compared with the conventional TiO2/CdS core-shell nanorod electrode. A higher photocurrent is observed from the stand-alone Ti3O5/CdS coreshell nanorod structure in which the nanorods are grown on both sides of the seed layer.

본 연구에서는 시판되는 탄소전극의 제조에 활용되는 활성탄의 형태가 아닌, 활성탄소섬유를 이용하여 축전식 탈염공정에 적용할 탄소전극을 제조하였다. polyvinylidene fluoride (PVDF)를 지지체로 사용하며 활성탄소섬유를 배합한 후 시판되는 그라파이트 시트에 캐스팅하여 탄소전극을 제조한 다음 염 제거 효율을 평가하였다. 활성탄소섬유의 입자 크기를 달리하였고 용매와 고분자 지지체 그리고 활성탄소섬유를 80 : 2 : 18, 80 : 5 : 15의 배합비율로 전극을 제조하였다. 축전식 탈염공정 운전조건으로 흡착전압, 시간, 탈착전압, 시간, NaCl 공급액의 농도와 유속 등을 달리하여 제조한 활성탄소섬유전극의 성능을 평가하였다.

We propose a speedy two-step deposit process to form an Au electrode on hole transport layer(HTL) without any damage using a general thermal evaporator in a perovskite solar cell(PSC). An Au electrode with a thickness of 70 nm was prepared with one-step and two-step processes using a general thermal evaporator with a 30 cm source-substrate distance and 6.0 × 10−6 torr vacuum. The one-step process deposits the Au film with the desirable thickness through a source power of 60 and 100 W at a time. The two-step process deposits a 7 nm-thick buffer layer with source power of 60, 70, and 80 W, and then deposits the remaining film thickness at higher source power of 80, 90, and 100W. The photovoltaic properties and microstructure of these PSC devices with a glass/FTO/TiO2/perovskite/ HTL/Au electrode were measured by a solar simulator and field emission scanning electron microscope. The one-step process showed a low depo-temperature of 88.5 oC with a long deposition time of 90 minutes at 60 W. It showed a high depo-temperature of 135.4 oC with a short deposition time of 8 minutes at 100 W. All the samples showed an ECE lower than 2.8% due to damage on the HTL. The two-step process offered an ECE higher than 6.25% without HTL damage through a deposition temperature lower than 88 oC and a short deposition time within 20 minutes in general. Therefore, the proposed two-step process is favorable to produce an Au electrode layer for the PSC device with a general thermal evaporator.

This manuscript explains the effective determination of urea by redox cyclic voltammetric analysis, for which a modified polypyrrole-graphene oxide (PPY-GO, GO 20% w/w of PPY) nanocomposite electrode was developed. Cyclic voltammetry measurements revealed an effective electron transfer in 0.1 M KOH electrolytic solution in the potential window range of 0 to 0.6 V. This PPY-GO modified electrode exhibited a moderate electrocatalytic effect towards urea oxidation, thereby allowing its determination in an electrolytic solution. The linear dependence of the current vs. urea concentration was reached using square-wave voltammetry in the concentration range of urea between 0.5 to 3.0 μM with a relatively low limit of detection of 0.27 μM. The scanning electron microscopy was used to characterize the morphologies and properties of the nanocomposite layer, along with Fourier transform infrared spectroscopy. The results indicated that the nanocomposite film modified electrode exhibited a synergistic effect, including high conductivity, a fast electron-transfer rate, and an inherent catalytic ability.

The design and fabrication of photoelectrochemical (PEC) electrodes for efficient water splitting is important for developing a sustainable hydrogen evolution system. Among various development approaches for PEC electrodes, the chemical vapor deposition method of atomic layer deposition (ALD), based on self-limiting surface reactions, has attracted attention because it allows precise thickness and composition control as well as conformal coating on various substrates. In this study, recent research progress in improving PEC performance using ALD coating methods is discussed, including 3D and heterojunction-structured PEC electrodes, ALD coatings of noble metals, and the use of sulfide materials as co-catalysts. The enhanced long-term stability of PEC cells by ALD-deposited protecting layers is also reviewed. ALD provides multiple routes to develop improved hydrogen evolution PEC cells.

Various carbon aerogels (CAs) were prepared from polymerization of resorcinol and formaldehyde and applied as the electrode materials of an electric double layer capacitor (EDLC) with the aim of controlling the textural and electrochemical properties of CAs by the type of base catalyst and the ratio of resorcinol to catalyst (R/C). The CAs from NaHCO3 and KHCO3 with H+ ions had higher specific surface areas but exhibited lower electrochemical properties than those from K2CO3 and Na2CO3, which had more uniform pore size distributions. The electrochemical properties of Na2CO3 were superior to those of K2CO3 probably because the polarizing power of Na+ ions was higher than K+ ions. With an increasing R/C ratio, the pore sizes of CA showed a tendency to increase but the uniformity of the pore size distribution got worse. For the four base catalysts, the highest electrochemical property was obtained at the R/C ratio of 500.