In the present work, multi-walled carbon nanotubes (MWCNT) were anchored with the assistance of vinyl ester resin (VE) on the carbon fiber surfaces of conventional carbon fabrics (CCF) and semi-spread carbon fabrics (SSCF) having different areal density, ply thickness, and crimp number, respectively. Here, MWCNT anchoring means that MWCNT were physically attached on the individual carbon fiber surfaces of each fabric by coating with dilute VE and then by thermally curing it. The MWCNT anchoring effect on the interlaminar shear strength (ILSS) of CCF/VE and SSCF/VE composites was investigated. MWCNT were also simply applied (without physical attachment) to the carbon fiber surfaces of CCF and SSCF for comparison, respectively. It was found that SSCF/VE composites exhibited the ILSS higher than CCF/VE composites, regardless of simple-applying or anchoring of MWCNT, increasing the ILSS with the MWCNT concentration. It was noted that MWCNT anchoring was effective to improve not only the interlaminar adhesion but also the interfacial bonding between the carbon fiber and the matrix due to the formation of MWCNT bridges between the individual carbon fibers of SSCF, indicating that the MWCNT anchoring effect was more pronounced with SSCF than with CCF. The result of the interlaminar property was well supported by the fiber and composite fracture topography.

Carbon-based materials, particularly graphite, have been extensively studied for their potential in fabricating flexible conductive fabrics with high electrical conductivity, which are attractive for wearable electronics. In this study, we investigated the effects of polar solvents, graphite concentration, and temperature on the electrical properties of conductive cotton fabrics. Our results show that the type of polar solvent and graphite concentration strongly influence the electrical conductivity of the fabrics. By controlling the graphite concentration, a wide range of conductive cotton fabrics with different conductivity values can be produced. Additionally, temperature resistance studies revealed that the fabrics exhibit both semiconductor and metallic behavior in the temperature range from room temperature to 160 °C. These interesting properties make the conductive cotton fabrics suitable for use as electrical components in circuits with resistive and inductive loads. Furthermore, we fabricated a supercapacitor with electrodes based on dispersed graphite and an electrolyte of sodium chloride salt dissolved in deionized water. Our findings suggest that conductive cotton fabrics have great potential for use in high-performance wearable electronics and energy storage devices.

In this study, natural dyeing using Polygonum tinctoria was performed with linen, ramie, and hemp, which are biodegradable cellulose fibers, considering environmental aspects. In particular, the impacts of alkali NaOH and reducing agent Na2S2O4 were examined, and the possibilities of minimizing the use and reusing the dye were explored. The surface dye concentrations were found to be in the following order: hemp>linen>ramie. With the increase in all additives, the L* value decreased, and the ⊿E and K/S values increased gradually. When Na2S2O4 was 1g/L, the surface color of the dye appeared uniformly from the NaOH concentration of 0.4g/L (pH 10.84). When NaOH was 0.4g/L, the K/S values of linen and ramie increased rapidly after 0.4g/L of Na2S2O4, and hemp maintained a stable color from 0.6g/L of Na2S2O4. With the increase in the dye concentration from 1 to 6g/L, all the fibers were dyed uniformly. The K/S value increased or higher doubled upon repeated dyeing six times for 5 min than when dyed only once for 30 min. Therefore, the linen, ramie, and hemp fibers dyed repeatedly exhibited good washing, rubbing, and colorfastness to perspiration, which was rated between 4 and 4–5, and that to light was rated as 5. Moreover, no discoloration due to sunlight was observed. Finally, linen exhibited a bacterial reduction of 99.9%, thereby indicating its excellent antibacterial property.

본 연구는 한국의 대학에 재학하고 있는 한국인 여대생과 중국인 여대생을 대상으로 캐주얼 셔츠 소재의 주관적인 감각과 선호도의 차이를 파악하고자 수행되었다. 춘추용 캐주얼 셔츠의 소재로 시판되는 소재 중에서 섬유조성이 상이한 7가지 종류의 흰색 셔츠 직물을 선정하였다. 캐주얼 셔츠 소재에 대한 주관적 감각 및 촉감 선호도의 평가자는 한국인 여대생과 중국인 여대생으로 40명이었다. 참가자들은 7종 소재를 관찰하고 나서 주관적인 감각과 촉감 선호도에 대한 평가를 설문지를 사용하여 작성하였다. 캐주얼 셔츠 소재의 주관적 감각을 요인분석한 결과, 평활감, 경량감, 유연감, 신축감의 4개 요인으로 분류되었다. 주관적 감각 요인은 소재의 섬유조성별 국적에 따라 부분적으로 유의한 차이를 보였다. 한국인 여대생은 중국인 여대생 보다 면 100% 소재를 더 가볍다고 평가하였고, 폴리에스터 50%/모달 50% 소재와 P100 소재를 더 신축성이 있다고 평가하였으나, 중국인 여대생은 폴리에스터 50%/면 45%/스판덱스 5% 소재를 더 가볍다고 평가하였다. 캐주얼 셔츠 소재의 섬유조성별 촉감 선호도는 국적에 따라 유의한 차이를 보였다. 한국인 여대생은 중국인 여대생에 비해 면 80%/폴리에스터 20% 소재, 폴리에스터 50%/면 45%/스판덱스 5% 소재, 아마 100% 소재를 더 선호하였다. 한편, 캐주얼 셔츠 소재의 주관적 감각 요인이 촉감 선호도에 미치는 영향은 국적에 따른 차이를 보였다. 한국 여대생의 경우, 평활감과 유연감이 캐주얼 셔츠 소재의 촉감 선호도에 긍정 적 영향을 미치는 반면, 중국인 여대생은 평활감, 유연감, 신축감이 촉감 선호도에 긍정적 영향을 미치는 것을 알 수 있었다. 이처럼 캐주얼 셔츠 소재에 대한 주관적 감각 및 촉감 선호도는 한국인 여대생과 중국인 여대생간의 차이를 보였다. 따라서 여대생을 대상으로 캐주얼 셔츠 소재 기획시 이러한 감성의 차이를 반영하는 것이 필요하다.

The purpose of this research was to revive the bathochromic effects of wool fabrics by using natural dyestuffs with minimum heavy metallic mordants. The natural dyestuffs used in this research were the indigo plant, Phellodendron amurense, and Caesalpinia sappan. Sample no. 1 was pre-dyed five times with indigo. Sample no. 2 was pre-dyed five times with indigo and then once dyed with Phellodendron amurense. Following the same method as sample no. 2 with an additional Phellodendron, Sample no. 3 consisted of a pre-dye five times with indigo and twice with Phellodendron amurense. Sample no. 4 was pre-dyed six times with indigo and then once dyed with Caesalpinia sappan. Sample no. 5 followed the same method as no. 4 with an additional dye of Caesalpinia sappan. Sample no. 6 was pre-dyed five times with indigo and then once dyed with Phellodendron amurense and once dyed with Caesalpinia sappan. The results were as follows: first, all samples showed deeper colors. Second, according to the results of the surface K/S measurement, the surface K/S of wool fabrics was >20. Third, the results of lightfastness measurement showed superiority over grade 4 in samples no. 1, 2, 3, 5, and 6. However, sample no. 4 was grade 3. In the colorfastness to washing measurement, sample no. 2 showed greater superiority than grade 3—4, while samples no. 1 and 3 were grade 3. In addition, the colorfastness to dry cleaning for all samples was satisfactory or excellent by more than grade 3.

The study investigates Atlas fabrics, the Ikat weaving method used by the Uygur People in Xinjiang, China. Based on domestic and foreign papers and other literature, different cultural characteristics of Ikat fabrics from various regions are compared. Following a theoretical investigation, characteristics of fabrics from the Indian Patola, Indonesian Ikat, Japanese Kasuri, and Uzbekistan Adras are summarized and compared with the characteristics of pattern, color, and manufacturing process of Atlas silk from Xinjiang China (also an Ikat fabric). The results are as follows. First, although the weaving process used for Ikat fabrics differs from country to country according to different national cultures, lifestyles, colors, patterns, and usage methods, they are all Ikat dyed fabrics. Therefore, they are all regarded as precious objects symbolizing a certain social status, and are used as a gift for special occasions, such as weddings. Second, the form of the pattern varies. Indian Patola has clear outlines and regular patterns, while the patterns of Japanese Kasuri are mainly inspired by folk life ideas. Indonesian Ikat contains influences from indigenous tribes, and Uzbekistan’s and China’s Atlas textiles are influenced by geography, religion, and national culture, including bright colors and pattern designs inspired by plants, musical instruments, and geometric figures. Finally, the patterns and colors of Xinjiang Atlas fabrics present strong ethnic characteristics. Unlike the Uzbekistan fabric which is mostly influenced by Islam, human and animal patterns would not feature in Xinjiang Atlas patterns, which mostly consist of long strips, repeated in a neat and orderly form.

본 연구는 소비자의 선호 촉감을 고려한 세면용 타월 개발에 도움을 주고자 수행되었다. 타월의 바탕조직은 동일하지만(면섬유), 파일을 구성하는 섬유의 종류가 서로 다른 3종(면 100%, 면 50% / 대나무 50%, 대나무 100%)을 시료로 선정하였다. 타월을 표준 세탁조건으로 반복세탁을 실시하였으며, 10회 세탁한 타월에 대하여 섬유유연제를 처리하여, 세탁에 따른 유연성과 흡수성(흡수속도와 흡수율) 등의 성능 변화를 고찰하고 대학생 남녀 소비자를 대상으로 주관적 감각과 촉감 선호도를 평가시켰다. 세탁횟수와 파일섬유의 종류에 따라 타월의 유연성은 유의한 차이를 보이지 않았다. 타월의 흡수성은 세탁에 따른 파일섬유의 종류에 따라 유의한 차이를 보여, 흡수속도는 대나무섬유 100%로 된 타월에서 높았으나, 흡수율은 면섬유로 된 타월이 높았다. 세탁 전 타월의 파일섬유 종류에 따른 주관적 감각 평가는 유의한 차이가 없었다. 세탁이 반복될수록 파일섬유의 종류에 따른 주관적 감각은 유의한 차이를 보였으며, 섬유유연제 처리시 더 부드럽고 매끄러우며 촉촉해진다고 평가하였다. 세탁 전 타월에 대한 촉감 선호도는 선호하는 편이었으나, 파일섬유 종류에 따른 유의한 차이는 없었다. 세탁횟수가 증가함에 따라 타월에 대한 촉감 선호도는 다소 저하되었으며, 대나무섬유로 된 타월의 촉감을 가장 선호하였다. 타월의 촉감 선호도에는 평활감, 유연감 등의 주관적 감각과 섬유유연제 처리가 영향을 주었다

본 연구는 친환경적이고 감성적인 패션상품의 색채기획을 위한 자료를 제공하고자 수행되었다. 쪽과 괴화로 복합 염색 후 무매염 견직물과 4종의 매염제(Al, Cu, Fe, Zn)를 처리한 견직물에 대하여 색채특성을 측정하였다. 또한 복합염색 후 매염처리된 연두색 견직물에 대하여 여대생을 대상으로 색채감성과 색채 선호도를 조사하였으며, 색채 특성과 색채감성이 색채 선호도에 미치는 영향을 분석하였다. 쪽/괴화로 복합염색된(무매염) 견직물은 선 염색한 쪽 농도가 10 g/ℓ이면 녹색, 쪽 20 g/ℓ을 사용하면 청록색을 나타내었으며, 4종의 매염제를 사용하여 처리시 거의 모든 경우 연두색을 나타내었다. 연두색을 나타내는 복합염색된 견직물 10종의 색채감성을 요인분석한 결과, 유쾌성, 품위성, 편안성 요인으로 분류되었으며, 이러한 색채감성은 쪽 농도와 매염제의 종류에 따라 대부분 유의한 차이를 보였다. 또한 복합염색된 연두색 견직물의 색채특성과 색채감성요인 간에는 대부분 유의한 상관성을 보여, L＊값, b＊값, C＊값이 크고 a＊값이 작을수록 유쾌성과 편안성 감성을 더 강하게 느끼며, L＊값이 작고 a＊값이 클수록 품위성 감성을 더욱 느끼는 것으로 나타났다. 따라서 쪽과 괴화로 복합염색하고 매염처리한 연두색 견직물의 색채감성요인을 예측변수로 활용할 수 있는 색채 선호도 예측 회귀식이 제안되었다.

This study aims to gather precise information on the real fabric color and texture, and purchasing intention of mobile shoppers buying clothes. Eighty volunteers participated in the sensory test on three smartphones with four colors and two fabricssmooth taffeta and hairy doeskin. This study carried out the posteriori test using the one-way ANOVA and Duncan test by SPSS21.0. In the analysis’ results of color preference, there were no differences among the four colors of taffeta between the smartphones, but different preferences between the red and yellow doeskin exist. In the case of the Samsung phone, which has an immense color distortion, the red fabric has a low color preference. In contrast, on the Apple phone yellow fabric had the highest preference because of its brightness. The Apple phone also has the highest purchasing intention of yellow colored taffeta, which is similar to the color preference results, although the real fabric has the opposite result. For doeskin, the real red and blue colored fabric has the highest purchasing intention. The Samsung phone has the biggest color mismatch with the real fabric. It also has the lowest purchasing intention of red taffeta fabric, while the LG phone has the lowest purchasing intention of blue fabric. Using the paired comparison method of the similarity between ‘real’ fabrics and the mobile version of fabric colors has a low similarity on all four colors of taffeta and doeskin fabrics. Therefore it can be concluded that phones do not represent the ‘real’ fabric color.

본 연구는 대학생 소비자의 선호 감성을 반영한 패션소재기획에 도움을 주고자 수행되었다. 8종의 데님소재를 대상으로 색채 특성과 역학적 특성 등의 객관적 특성을 평가하였으며, 데님소재의 색채 선호도, 주관적 감각, 촉감 선호도를 대학생을 대상으로 조사하였다. 또한 데님소재의 색채 선호도와 촉감 선호도가 데님 슬랙스의 구매 선호도에 미치는 영향을 파악하였다. 데님소재의 색채 선호도는 데님소재의 개별 시료에 따른 유의한 차이를 보였다. 대학생들은 데님소재의 색채특성 중 -b*값과 C값이 낮게 측정된 남색(PB)의 데님소재를 선호하였다. 데님소재의 역학적 특성 중에서 마찰계수 평균편차(MMD), 마찰계수(MIU), 기하학적 거칠기(SMD) 등의 표면특성과 전단 히스테리시스(2HG5) 등의 전단특성은 주관적 감각에 중요한 영향을 미치는 요인이었다. 한편, 데님소재의 촉감 선호도는 개별 시료에 따른 유의한 차이를 보였다. 폴리우레탄이 혼방된 데님소재에 대한 촉감 선호도가 높게 나타났으며, 면섬유 100%로 구성된 상대적으로 두껍고 무거운 데님소재의 촉감 선호도는 낮았다. 또한 촉감 선호도에 영향을 미치는 주관적 감각은 평활감, 유연감, 경량감 등의 순이었다. 데님 슬랙스에 대한 구매 선호도는 모두 평균 4점 이상의 점수를 나타내어 선호하였다. 데님소재의 색채 선호도와 촉감 선호도는 데님 슬랙스 구매 선호도에 영향을 미쳤는데, 색채 선호도가 더욱 영향을 주었다.

PVA 부직포의 방염성을 향상시키기 위하여 POCl3로 방염처리하였다. POCl3로 처리한 PVA 부직포의 물리적 및 열적 특성을 측정하고 분석하였다. 개질한 PVA 부직포는 대부분 물에 용해하지 않았으나 수축과 스웰링 특성을 보 였다. POCl3로 방염처리한 PVA 부직포의 열적 특성이 우수하고 방염특성이 원시료 보다 많이 우수한 것을 확인하였다. 그라프트 비와 염색성 사이의 선형관계는 PVA 부직포의 히드록시기와 POCl3가 공유결합으로 연결된 것에 기인하는 것 으로 분석되었다.

본 연구에서는 인체 친화적이고 환경 친화적인 패션제품 소재기획을 위한 기초 자료를 제시하고자 수행되었다. 이를 위해서 4종의 섬유소 소재를 대상으로 염색조건을 달리하여 천연 쪽 염색을 실시하여 색채특성과 색채감성을 평가하였으며, 이러한 특성이 선호도에 미치는 영향을 분석하였다. 쪽 염색된 직물은 모두 중, 저명도와 저채도의 남색(PB)을 구현하였다. 이들 직물의 색채특성은 섬유종류와 염색조건에 따라 유의한 차이를 보였다. 쪽 염색된 직물에 대한 색채감성은 스포티 감성, 클래식 감성, 내추럴 감성 등 3가지 요인으로 분류되었다. 이러한 색채감성은 섬유종류와 염색조건에 따라 부분적으로 유의한 차이를 나타내었다. 또한 쪽 염색 직물의 색채특성과 색채감성 요인 간에는 부분적으로 유의한 상관관계를 보였다. 쪽 염색 직물의 색채 선호도에 영향을 주는 요인으로는 색채감성 요인 중에서 클래식 감성과 스포티 감성, 색채특성에서는 L*값인 것으로 나타났다.

This study aims to analyze the changes in the mechanical properties of interlock fabrics knitted with three types of fibers (i.e., cotton, wool, and polyester) by bonding fusible interlinings with varying deniers (i.e., 10D, 20D, and 30D) for a 3D virtual try-on system. We experimented with four properties and thicknesses of twelve specimens of interlining bonded knitted fabrics including face fabrics and interlinings. The results showed that the tensile property changed values (i.e., LT increased, and WT and RT decreased) according to the denier of interlinings; however, the change was slight. On the other hand, the bending property increased significantly as the denier of the interlining increased on both the wale and the course. Among shearing properties, the value of G increased as the denier of the interlining increased on both the wale and the weft; however, 2HG decreased. Additionally, changes in the compression property varied according to the fibers and the denier of the interlinings. The thickness of the knitted fabrics increased or decreased slightly by bonding the interlining. based on these results, we conclude that the 3D virtual system users need to reflect these numerical changes of interlock fabrics by bonding interlinings when they perform fitting tasks on the screen to accurately express the to accurately express the manufacturing conditions of the real garment.

This study aims to analyze the changes in the mechanical properties of interlock fabrics knitted with three types of fibers (i.e., cotton, wool, and polyester) by bonding fusible interlinings with varying deniers (i.e., 10D, 20D, and 30D) for a 3D virtual try-on system. We experimented with four properties and thicknesses of twelve specimens of interlining bonded knitted fabrics including face fabrics and interlinings. The results showed that the tensile property changed values (i.e., LT increased, and WT and RT decreased) according to the denier of interlinings; however, the change was slight. On the other hand, the bending property increased significantly as the denier of the interlining increased on both the wale and the course. Among shearing properties, the value of G increased as the denier of the interlining increased on both the wale and the weft; however, 2HG decreased. Additionally, changes in the compression property varied according to the fibers and the denier of the interlinings. The thickness of the knitted fabrics increased or decreased slightly by bonding the interlining. based on these results, we conclude that the 3D virtual system users need to reflect these numerical changes of interlock fabrics by bonding interlinings when they perform fitting tasks on the screen to accurately express the to accurately express the manufacturing conditions of the real garment.

본 연구에서는 직/편물 8종을 대상으로 이들 수직방향과 수평방향 수분이동특성 측정방법에 따른 소재들의 수분이동 특성을 분석하였다. 또한, 8종의 시편의 MMT에 의한 건조특성을 수직 건조 측정 결과와 비교하여 논의하였다. 수평 수분이동 방법인 MMT 시험 결과는 수직법인 바이렉 방법의 결과와 유사한 거동을 나타내었다. 대나무, 린넨 및 면/나일론 복합 소재는 드롭법의 흡수시간은 짧았으며, 표면의 낮은 접촉각 및 직물의 높은 다공성에 기인한 것으로 판단되며, 친수성 스테이플 섬유의 구조와 상관이 있을 것으로 보인다. MMT에 의한 건조특성은 니트 및 대나무 직물의 최대 흡수반경이 가장 우수했으며, 수식 건조법에 비해 차이를 나타내었다. MMT 방법의 건조속도는 직물의 두께와 포화수분 흡수율과 높은 상관성을 가졌으며, 회귀계수는 각각 0.9와 0.88이었다. 이는 직물의 두께가 얇을수록 위킹 및 건조특성이 우수하며, 기능성 소재기획시 착용 내구성을 판단하는데 중요함을 의미한다. 또한 상이한 섬유소재, 실 및 구조의 소재에 대한 수분이동특성(위킹, 건조)는 측정 방법에 따라 다른 결과를 나타내었다.

This study was carried out in order to provide useful data for planning fabrics of summer eco-friendly fashion products. The fabrics used in this study were four cellulose fibers: cotton, cotton/mulberry blended, flax, and flax/lyocell blended. Dyeing with natural indigo was carried out under three different reducing conditions (i.e., general, eclectic, and eco-friendly) that have different reducing agent and pH levels, and hydrosulfite and glucose were used as a reducing agent. The dye uptake (K/S value) of fabrics dyed with natural indigo by a reducing condition was the highest at 660nm. Regardless of the fabrics, dye uptake was the highest under the general reducing condition and the lowest under the eco-friendly reducing condition. Under different reducing conditions, the dye uptake of natural indigo fabrics with the maximum absorption wavelength indicated a difference. The colorfastness of cellulose fabrics that were dyed with natural indigo had a rate of 4 to 5 except for rubbing fastness, which indicated good colorfastness. Additionally, natural indigo-dyed cotton and flax fabrics had good antibiosis. When the color characteristics of fabrics dyed with natural indigo were measured, all of the three reducing conditions created purple blue (PB) colors, and the color characteristics of dyed fabrics by reducing condition and fabric showed significant differences.

Natural dye extracted from Salicornia bigelovii was applied to silk fabrics by dip dyeing process. The dyeing properties and the functionalities of the silk fabrics were determined. Factors affecting the dyeing properties such as dyestuff concentration, temperature, time and pH were studied. The colorimetric parameters L*, a*, b*, and H, V/C values were measured to select the optimal mordanting conditions. The colorfastnesses of the dyed and mordanted fabrics were estimated for practical use; in addition, the antibacterial property, ultraviolet protection properties were evaluated. The dyeabilities of silk increased depending on the increasing dye concentration, dyeing time, and dyeing temperature. And optimum dyeing results were achieved when dyeing with 300% (o.w.f.) of dye concentration at 90℃ for 100 minutes and at pH 3. The dyed silk fabrics without mordants produced yellow (Y) color and showed yellow (Y) or green yellow (GY) colors depending on the mordants type. The light fastness of dyed and Al mordanted silk fabrics were found to be excellent, and the drycleaning and rubbing fastness were good. The dyed silk fabrics showed no antibacterial property, but Al and Cu mordanted silk fabrics showed 99.9% reduction rate. The ultraviolet protection properties of the dyed silk fabric was improved. And the ultraviolet protection properties of mordanted samples showed very good ultraviolet protection properties.

This study is aimed to measure the physical colorimetric property according to three conditions, natural dyestuffs (Gardenia, Sappan wood, Lac, Gardenia blue, Mugwort, and Indigo), fabric types (cotton, silk), and presence of mordant (without, with), and then to evaluate the psychological sensibility. Also, to perform analysis of variance (ANOVA) to find out the differences of physical properties according to the three natural dyeing conditions, and to analyze the relationship between physical property and psychological property by Pearson's correlation analysis and then suggest the prediction model by regression analysis using SPSS program (ver. 21.0). Finally, to propose a certain sensibility image map of naturally dyed fabrics, MDS (Multidimensional Scaling) was used, and as a result, Gardenia dyed fabrics having the color sensibilities such as 'hard' and 'heavy' were suggested to evoke masculine image, and to evoke feminine image, Sappan wood and Lac having 'bright', 'transparent', 'soft' and 'light' sensibilities were suggested. Natural image might be induced by using 'subdued' Mugwort dyed fabrics, and active image might be induced by using 'showy' Indigo dyed fabric.