The present research focuses on the tribological behavior of the AA5083 alloy-based hybrid surface composite using aluminosilicate and multi-walled-carbon nanotube through friction stir processing for automotive applications. The friction stir processing parameters (tool rotation and traverse speed) are varied based on full factorial design to understand their influence on the tribological characteristics of the developed hybrid composite. The surface morphology and composition of the worn hybrid composite are examined using a field-emission scanning electron microscope and an energy-dispersive x-ray spectroscope. No synergistic interaction is observed between the wear rate and friction coefficient of the hybrid composite plate. Also, adhesive wear is the major wear mechanism in both base material and hybrid composite. The influence of friction stir process parameters on wear rate and the friction coefficient is analyzed using the hybrid polynomial and multi-quadratic radial basis function. The models are utilized to optimize the friction stir processing parameters for reducing the rate of wear and friction coefficient using multi-quadratic RBF algorithm optimization.

본 연구는 다중벽 탄소나노튜브(MWCNT)로 보강된 복합재 구조의 동적 해석을 다루었다. Mori-Tanaka 모델을 기반으 로 MWCNT 중량 비율, 패널의 곡률, 그리고 CNT의 임의 배열이 복합재의 동적거동에 미치는 상호작용을 연구하였다. 본 연구 결과는 CNT의 부피함유비율의 변화에 따른 복합재의 유효탄성계수를 예측하는 기존 문헌결과와 비교하여 검증하였다. 수치해 석 예제는 복합재의 동적 특성을 평가함에 있어서 MWCNT 보강의 불규칙한 배열 또는 기울어진 방향으로 배치된 효과에 대한 중요성을 제시하였다.

본 연구는 Mori-Tanaka 방법 및 멀티스케일 접근 방법을 적용하여 CNT의 굴곡성을 고려한 CNT-복합재 보강 콘크리트 보에 대한 균열해석을 수행하였다. Ad-hoc Eshelby 텐서에 기반하여 CNT의 굴곡성을 기하학적으로 고려하여 폴리머와 합성 하는 방법을 적용하였다. 멀티스케일 방법이 기반하여 CNT 함유량 및 굴곡성 변화에 따른 복합재의 탄성계수 및 강도변화를 추정하였다. 본 해석모델은 기존 문헌과 비교검증하였다. 본 연구에서 도출한 결과는 CNT 함유량과 CNT 굴곡성의 상호관계를 도시하였다. CNT 보강 복합재 구조물의 해석에 있어서 CNT 굴곡성의 중요성을 입증하였다.

The effect of multi-walled carbon nanotubes (MWCNT) coating in the presence of polyethyleneimine (PEI) of different molecular weights (MW) on the interfacial shear strength (IFSS) of carbon fiber/acrylonitrile–butadiene–styrene (ABS) and carbon fiber/epoxy composites was investigated. The IFSS between the carbon fiber and the polymer was evaluated by means of single fiber microbonding test. The results indicated that uses of the carbon fibers uncoated and coated with pristine, low MW PEI-treated, and high MW PEI-treated MWCNT significantly influenced the IFSS of both thermoplastic and thermosetting carbon fiber composites as well as the carbon fiber surface topography. The incorporation of low MW (about 1300) PEI into the carboxylated MWCNT was more effective not only to uniformly coat the carbon fiber with the MWCNT but also to improve the interfacial bonding strength between the carbon fiber and the polymer than that of high MW (about 25,000) PEI. In addition, carbon fiber/epoxy composite exhibited the IFSS much higher than carbon fiber/ABS composite due to the chemical interactions between the epoxy resin and amine groups existing in the PEI-treated MWCNT.

Synergetic effect of multi-walled carbon nanotubes (MWCNTs)/nanoclays hybrid was investigated on the properties of highimpact polystyrene (HIPS) nanocomposite foams. The glass transition temperature and the cellular structure including the cell size and cell density were studied in details. Adding MWCNT and nanoclay increased the glass transition temperature of HIPS by 8.5 °C and 1.5 °C, respectively. The experimental results indicated that the cell size of HIPS foams was reduced from 84.05 to 60.97 μm and 40.22 μm using MWCNTs and nanoclays, respectively. The synergetic effect of MWCNT/nanoclay was more significant by reducing the cell size to 13.69 μm. The cell density was improved from 5.79 × 104 to 1.77 × 105 cell/ cm3 using MWCNTs and to 9.39 × 106 cell/cm3 using nanoclays. The cell density reached to 2.90 × 107 cell/cm3 using the synergetic effect of MWCNT/nanoclay.

The present paper describes the effect of co-catalyst on the growth of multiwall carbon nanotube (MWCNT) by chemical vapor deposition (CVD) technique. The fascinating properties of CNT make them a suitable material for optoelectronic devices such as sensors, LED, solar cell, and field emission displays. MWCNTs were fabricated using CVD, by decomposing ethanol over finely dispersed Co metal as a catalyst at 750 °C. The effects of growth condition on the quality and morphology of MWCNTs were investigated by SEM, FTIR and XRD. SEM photographs show that the nanotubes are densely packed having a diameter of 10–15 nm. The bandgap was calculated by UV–visible spectroscopy and it was found varying from 3.08 to 3.5 eV by changing the substrates. The average size of tubes (length) was found to be 250 nm. FTIR exhibited that the synthesized MWCNTs were semiconducting in nature with the oxygen vacancies causing the variations in refractive index with the exposure of moisture.

Carbon-based magnetic nanostructures in several instances have resulted in improved physicochemical and catalytic properties when compared to multi-wall carbon nanotubes (MWCNTs) and magnetic nanoparticles. In this study, magnetic MWCNTs with a structure of NixZnxFe2O4/MWCNT as peroxidase mimics were fabricated by the one-pot hydrothermal method. The structure, composition and morphology of the nanocomposites were characterized with X-ray diffraction (XRD), Fourier transform infrared spectroscopy and transmission electron microscopy. The magnetic properties were investigated with a vibrating sample magnetometer. The peroxidase-like catalytic activity of the nanocomposites was investigated by colorimetric and electrochemical tests with 3,3´,5,5´-tetramethylbenzidine (TMB) and H2O2 as the substrates. The results show that the synthesis of the nanocomposites was successfully performed. XRD analysis confirmed the crystalline structures of the NixZnxFe2O4/ MWCNT nanohybrids and MWCNTs. The main peaks of the NixZnxFe2O4/MWCNTs crystals were presented. The Ni0.25Zn0.25Fe2O4/MWCNT and Ni0.5Zn0.5Fe2O4/MWCNT nanocatalysts showed nearly similar physicochemical properties, but the Ni0.5Zn0.5Fe2O4/MWCNT nanocatalyst was more appropriate than the Ni0.25Zn0.25Fe2O4/MWCNT nanocatalyst in terms of the magnetic properties and catalytic activity. The optimum peroxidase-like activity of the nanocatalysts was obtained at pH 3.0. The Ni0.5Zn0.5Fe2O4/MWCNT nanocatalyst exhibited a good peroxidase-like activity. These magnetic nanocatalysts can be suitable candidates for future enzyme-based applications such as the detection of glucose and H2O2.

Magnesium alloy is becoming known for the lightest material in the metallic materials. Recently the automotive industry has a variety application to the light weight parts replacement. This study focuses on the mechanical property improving through a tiny amount’s CNT addition into the magnesium alloy as AM60. The CNT material is an arduous combination of the metallic materials. Therefore this study is concentrating on the contact force growth for the CNT material. Consequently, the made CNT is produced by the CVD process using the magnesium catalyst. The CNT material has dispersive with mechanical process into the molten AM60 alloy. The mechanical experiment result that hardness is 18% increasing and tensile strength is 13% increasing, better than the raw AM60 alloy on this investigation.

PVDF(Polyvinylidene fluoride)는 물리⋅화학적 물성이 우수하지만 극소수성을 띠어 유기물에 의한 오염이 쉽다. 따라서 본 연구에서는 친수성기를 가진 기능성 말단기가 부착된 탄소나노튜브 (MWCNT)를 첨가하여 PVDF막의 친수성 증가를 통하여 수투과도 및 내오염성을 향상시키고자 하였다. 초음파를 통하여 MWCNT를 분산시킨 후 상전이 공정으로 분리막을 제조하였으며, 말단기의 종류 및 농도차이에 따른 성능 변화를 확인해 보았다. 그 결과, PVDF-ODA MWCNT막이 PVDF막 보다 수투과도가 2배 이상 향상되었으며, 내오염성도 우수 하였다. 제조된 분리막의 특성은 SEM, FT-IR, XRD를 이용하여 분석하였다.

탄소나노튜브(MWCNT)를 고분자에 첨가하게 되면 그 물성을 향상시킬 수 있다. 기존의 연구 결과에서 PEO 막에 EVA 를 첨가함으로써 막의 기체투과도와 선택도의 향상을 확인하였다. 본 연구에서는 탄소나노튜브의 분산을 위하여 산처리 과정을 통해 표면에 카르복실기를 도입한 탄소나노튜브(MWCNTCOOH) 를 제조하여 PEO/EVA/MWCNT 혼성막을 제조하였다. 제조된 막의 특성은 TGA, SEM 분석으로 확인하였으며 막의 CO2, O2, N2 기체에 대한 투과도와 선택도 또한 확인하였다.

다중벽 탄소나노튜브(MWCNT)는 전기적, 기계적 성질이 매우 우수한 소재이나, MWCNT를 복합 체로 응용하는 과정에서 MWCNT의 분산이 어려워 복합체의 제조에 제한을 받고 있다. 본 연구에서는 MWCNT의 표면을 산화시켜 -OH기를 표면에 도입하고, 표면에 음전하를 증가시켜 불소 고분자(PTFE) 도막에서 MWCNT의 분산을 증대시켰다. 그리고, MWCNT의 효과적인 분산으로 PTFE 복합체 도막의 경도와 소수성이 증가되고, 전기 정도성을 부여하여 표면의 기능성이 증대됨을 보여주었다.

Multi-walled carbon nanotube (MWCNT)/epoxy composites are prepared by a vacuum assisted resin transfer molding (VARTM) method. The mechanical properties, fracture surface morphologies, and thermal stabilities of these nanocomposites are evaluated for epoxy resins with various amounts of MWCNTs. Composites consisting of different amounts of MWCNTs displayed an increase of the work of adhesion between the MWCNTs and the matrix, which improved both the tensile and impact strengths of the composites. The tensile and impact strengths of the MWCNT/epoxy composite improved by 59 and 562% with 0.3 phr of MWCNTs, respectively, compared to the epoxy composite without MWCNTs. Thermal stability of the 0.3 phr MWCNT/epoxy composite increased compared to other epoxy composites with MWCNTs. The enhancement of the mechanical and thermal properties of the MWCNT/epoxy nanocomposites is attributed to improved dispersibility and strong interfacial interaction between the MWCNTs and the epoxy in the composites prepared by VARTM.

Carbon nanotube(CNT) plays an essential role in various fields of nano based science and technology. Recently, silica coated CNT composites are interested because they are useful for the optical, magnetical, and catalytic applications. In this report, carboxyl groups were introduced on the MWCNT using nitric acid. In order to maximize the silica encapsulation efficiency, carboxyl groups of MWCNT reacted with a silane coupling agent were used to prepare silica coated MWCNT. Due to their strong interaction between modified MWCNT and TEOS. Silica layer with a controllable thickness was achieved. Silica coated MWCNT were further utilized as the template for the synthesis of hollow silica nanotubes after 800℃ calcination.

Multi-walled carbon nanotube (MWCNT)/poly(vinyl alcohol) (PVA) nanocomposite hydrogels were prepared by freezingthawing method for the electro-responsive transdermal drug delivery. MWCNTs were used as the functional ingredient to improve both mechanical and electrical properties of MWCNT/PVA nanocomposite hydrogels. The morphology of nanocomposites revealed the uniform distribution of MWCNTs and the good interfacial contact. The compression moduli of hydrogel matrices increased greatly from 40 to 1500 kPa by forming MWCNT/PVA nanocomposites. The swelling ratio of MWCNT/PVA nanocomposites decreased as the content of MWCNTs increased under no electric voltage applied. However, the swelling ratio of MWCNT/PVA nanocomposites increased as the content of MWCNTs increased under electric voltage applied and the applied electric voltage increased. The drug was released in the electro-responsive manner through the skin due to the electro-sensitive swelling characteristics of MWCNT/PVA nanocomposite hydrogels.

For the present paper, we prepared MgO/MWCNT/TiO2 photocatalyst by using multi-walled carbon nanotubes(MWCNTs) pre-oxidized by m-chlorperbenzoic acid (MCPBA) with magnesium acetate tetrahydrate (Mg(CH2COO)2·4H2O)and titanium n-butoxide (TiOC(CH3)34) as magnesium and titanium precursors. The prepared photocatalyst was analyzed byX-ray diffraction (XRD), scanning electron microscopy (SEM) and energy dispersive X-ray (EDX) analysis. The decompositionof methylene blue (MB) solution was determined under irradiation of ultraviolet (UV) light. The XRD results show that theMgO/MWCNT/TiO2 photocatalyst have cubic MgO structure and anatase TiO2 structure. The porous structure and the TiO2agglomerate coated on the MgO/MWCNT composite can be observed in SEM images. The Mg, O, Ti and C elements can bealso observed in MgO/MWCNT/TiO2 photocatalyst from EDX results. The results of photodegradation of MB solution under UVlight show that the concentration of MB solution decreased with an increase of UV irradiation time for all of the samples. Also,the MgO/MWCNT/TiO2 photocatalyst has the best photocatalytic activity among these samples. It can be considered that theMgO/MWCNT/TiO2 photocatalyst had a combined effect, the effect of MWCNT, which could absorb UV light to create photo-induced electrons (e−), and the electron trapping effect of MgO, which resulted in an increase of the photocatalytic activity of TiO2.

The synthesis of C60@MWCNT was carried out at room temperature (~25℃) from arc-discharge prepared Multi-wall carbon nanotubes (MWCNTs). They were oxidized and acid treated for tube opening. Then C60 molecules were encapsulated into MWCNTs by wetting them with C60-toluene solution for several minutes followed by ultrasonification. C60@MWCNT was cleaned by pure toluene to remove any excess C60. C60@MWCNT was characterized by electron microscopy, which showed large scale filling of C60 into MWCNTs. It was observed that the mechanism of insertion of C60 into MWCNTs may be due to the capillary suction at the opening ends of MWCNTs.

The surface treatment effects of reinforcement filler were investigated based on the dynamic mechanical properties of mutiwalled carbon nanotubes (MWCNTs)/epoxy composites. The as-received MWCNTs(R-MWCNTs) were chemically modified by direct oxyfluorination method to improve the dispersibility and adhesiveness with epoxy resins in composite system. In order to investigate the induced functional groups on MWCNTs during oxyfluorination, X-ray photoelectron spectroscopy was used. The thermo-mechanical property of MWCNTs/epoxy composite was also measured based on effects of oxyfluorination treatment of MWCNTs. The storage modulus of MWCNTs/epoxy composite was enhanced about 1.27 times through oxyfluorination of MWCNTs fillers at 25℃. The storage modulus of oxyfluorinated MWCNTs (OF73-MWCNTs) reinforced epoxy composite was much higher than that of R-MWCNTs/epoxy composite. It revealed that oxygen content led to the efficient carbon-fluorine covalent bonding during oxyfluorination. These functional groups on surface modified MWCNTs induced by oxyfluorination strikingly made an important role for the reinforced epoxy composite.

Recently, the evaluation of the grout chamber of PC bridges has been emphasized in order to prevent many problems in advance. This paper analyzes the electrical resistance of the MWCNT cement composites by electrode intervals in order to select the optimum electrode location for evaluation of grout chamber. It is concluded that the electrical resistance of the MWCNT cement composite specimens increase as the electrode interval is longer.