This study evaluated the effectiveness of odor reduction when spraying inside the Bio-curtain (hereinafter referred to as curtain) according to the exhaust fan operating rate. Spraying is a main factor affecting the ability to odor reduction of curtains. The curtain (total area: 37.9m3) was constructed with two layers of light-shielding screens stretched over a rectangular parallelepiped structure installed around an exhaust fan (630 mm) on the side wall of a pig barn. Air samples for odor analysis were collected from inside the pig barn and outside the curtain. The main odorous compounds such as volatile fatty acids, phenols, indoles, and ammonia were measured. The odor reduction effectiveness was evaluated by total odor activity values (TOAVs) summed to the odor activity values of each odorous compounds. Depending on the exhaust fan operating rate, the reduced rate of TOAVs gradually decreased to the range between 15.67% and 68.80%. Because the contact time between the spraying liquid and the air velocity of the exhaust fan becomes shorter (or there is a reduction in liquid to gas flow ratio) as the exhaust fan operating rate increases. The results of this study can be used as basic data for research into spraying conditions to improve the odor reduction effectiveness of curtains.

In recent years, China's agricultural listed companies have developed rapidly. This paper studies the operating efficiency of listed agricultural companies in China. exploring the factors that affect the operating efficiency of listed agricultural companies, and proposes targeted countermeasures for the development of listed agricultural companies. And give some suggestions to Korean agricultural companies and A share investors. This paper uses the DEA model, selects the 40 best-developed Chinese agricultural listed companies in 2018 as a sample, analyzes the operating efficiency of these companies, and added two new input variables: asset impairment losses (AIL) and business tax and surcharge (BTS), which will also have an impact on operating efficiency. This paper can provide reliable suggestions for the development of agricultural listed companies, and thus guide the healthy operation of agricultural companies.

본 연구는 비용매 상분리법(nonsolvent induced phase separation, NIPS)을 사용하여 제조한 분리막의 배출수 처리 현장 적용성 test를 위한 최적 유효막 길이 선정 하기 위해, 동일한 원수, 기본 공정 조건으로 유효막 길이를 변화시켜 운전에 따른 역세 효율 및 운전압을 관찰하였다. 동일한 공정조건에서 유효막 길이의 변화를 주어 500㎜, 1,000㎜, 1,500㎜의 유효막 길이에 따라 1.5일간 고탁도의 가혹한 조건에서 공정을 지속하여 측정을 실시하였다. 유효막 길이별 운전 결과 유효막 길이에 따른 역세에 의한 효율차이를 확인할 수 있었으며 고탁도의 원수를 사용하여 중공사 막의 내부 폐색이 진행되었으며 유효막 길이가 길수록 폐색되지 않은 bore쪽으로만 역세가 진행되어 여과 후 역세에 의한 회복이 현저히 떨어짐을 확인하였다.

본 연구에서는 모바일 환경에서의 스마트 디바이스를 통한 콘텐츠 및 저작물 등을 감상하는 시대가 되었지만, 저작권 보호와 이에 따른 기술적 조치는 상대적으로 미흡한 현 시장 환경에서 국내 스마트 디바이스 산업 현황에 대한 정량적 연구를 기반으로 하여 IoT 디바이스 시장에서 저작권 기술에 대한 프레임워크를 제시하고자 하며, 최적의 자원효율적인 저 작권 기술 프로세스에 대한 제안과 더불어 핵심 기술로의 활용 전망과 저작권 기술의 구동에 대한 기대성과를 제시하고자 한다.

Tuna purse seine fishery in the western and central Pacific Ocean (WCPO) has been rapidly developed since early 1980s due to massive investment of major distant water fishing nations, and catch by purse seine fishery operating in the WCPO accounts for nearly half of the world’s tuna total catch. As fishing efficiency is reflected by not only improving of individual vessel’s capacity but also increasing number of active vessel, it is essential to understand vessel capacity for reliable assessment result on how fishery affects stock status of target species. In this study, fishing efficiency was analyzed by main factors which are representative of vessel capacity using fishing data and vessel information related to Korean tuna purse seine fishery operating in the western and central Pacific Ocean from 1992 to 2014. It showed that fishing efficiency of vessel tends to be higher when having larger vessel tonnage, higher engine power, lower vessel age and larger length of vessel. As for fishing efficiency by set type, CPUE of associated set with floating objects was generally higher than that of free school set, and CPUE of free school set seemed to have a greater effect on engine power and vessel age compared to other factors.

A new shell divider was manufactured according to the principle of the lever in order to improve working efficiency in collecting the gonad of Sea Urchin, Anthocidaris crassispina, around the coast of jeju. It was composed of three parts of a pair of handles for grasping power, a fulcrum and a pair of knives for action with 21cm in length and 13cm in width. The operating efficiency of the shell divider was tested out in three place of Jeju coast. Statistical significances of differences of working time between test groups were calculated according to the t-test with the level of significance . In dividing the shell of sea urchin, the average of about 3 seconds of working time by the shell divider was less than that by a knife. At the result of t-test, the statistical significance in the working time existed between the divider group and the knife group. On the other hand, the working time among the divider operators showed no significant differences. It is concluded that the shell divider is more efficient than a knife in traditional operating.

TOC(Theory Of Constraints) has been applied to manufacturing field traditionally. Nowadays, it's area is being wide to SCM, Service, Marketing. This paper analyzed Demand pull Manufacturing system, then, tried to apply TOC concept for improving productivity. It used DBR (Drum-Buffer-Rope) considering defect and OEE (Overall Equipment Efficiency) . For illustration, simulation was showed and it is suggested how to do for productivity improvement.

Statistical analysis technique was applied to operating parameters and removal efficiency data sets obtained from advanced wastewater treatment plant during 1 year. Through factor analysis three factors derived varimax rotation were selected each plant. Three components explained 96%, 87% of the total variance of the process, respectively. The components on A2O plant were identified in the following order：1) Shortening the SRT during high-flow period, 2) Keeping biomass high on winter 3) factor was related to DO. On DNR plant, we defined them as follows: factor 1, Prolonged the SRT during high-flow period; factor 2 was related to sludge return; factor 3, Influent BOD during low-DO period. This technique was believed to assist operators in identifying priorities to improve operation efficiency.