정부(해양수산부) 및 관계기관에서는 안전관리 취약선박의 해양안전 증진을 위한 많은 정책을 시행하고 있으나, 선박의 안전관리에 대한 위험성평가 부재로 각 제도의 효과성에 다소 아쉬움이 확인되었다. 선박의 위험성평가에 대한 국내 선행연구는 대부분 개별적 해양사고 위험성에 대한 단편적 위험성만을 취급하고 있어 포괄적 해양사고 위험성평가를 위한 새로운 방식이 필요하다. 선박의 안전관 리에 대한 포괄적 위험성평가 적용사례로 항만국통제와 노르웨이 해사국의 점검대상 선정방법이 있다. 본 연구에서는 국내 해양사고 및 등록현황의 높은 비중을 차지하고 있는 연근해어선을 대상으로 포괄적 선박안전관리 위험성평가를 위한 지표를 개발하고 적용하였다. 그 결과, 각 선박별 위험성을 계량적 수치로 확인하였고, 개별적 안전관리 취약요소의 순위를 식별하였다.

In general, companies operate systematically in response to financial risks such as exchange rates and liquidity, while they are vulnerable to risks in the manufacturing and sales processes. In particular, logistics refers to the activities for planning, managing and implementing efficient flows from the starting point of goods and products to the point of consumption, The purpose of this study was to develop key risks and key risk management indicators (KRIs) for risks that undermine logistics efficiency so that logistics risks can be effectively prevented and managed. As a result, 40 risk management indicators (KRIs) were developed in a total of six categories in the logistics sector, and the definition, calculation method and early warning grade of each KRI were presented so that companies could prevent risks in advance in logistics activities and contribute to enhancing efficiency of their work.

The major issue in aircraft industry is aviation safety management because of demand improvement and advancement of the aircraft. This study is to assess the risks for aviation safety management using IRPN( importance-risk priority number) which is added to importance coefficient from RPN(risk priority number). In FMEA, RPN requires the factors like the occurrence (O), Severity (S), and Detection (D) of each failure mode to be precisely evaluated. Therefore, the severity and detection is derived by the value from FMEA of expert group based on the Fuzzy theory. The occurrence is calculated from the accident statistics of IATA(international air transport association) database. Particularly, this study introduces importance coefficient to prevent from RPN distortions. It is also derived from FMEA based on the Fuzzy theory. Finally, the critical ranking of risk factors according to I-RPN is compared with the existing research.

처분시설의 개발과정에서 안전성평가 문서관리는 체계적인 품질활동이 수반되어야 하며, 본 논문에서는 중·저준위 방사 성폐기물 처분시설의 건설단계에 보완된 부지특성, 지하수특성, 최종설계내용 및 모니터링 입력데이터를 포함하여 Safety Case를 위한 안전성평가 입력데이터 품질보증체계를 설명하였다. 현장/실험결과데이터, 실제 설계데이터 및 적치계획, 콘 크리트 물성데이터, 지하수, 기상, 지진에 대한 현장 모니터링데이터, 생태계데이터 및 핵종재고량데이터를 입력데이터 결 정원칙에 따라 선별하고 안전성평가에 적용할 수 있는 데이터 관리체계를 확보하였다. 이는 향후 처분시설 안전성평가의 데 이터 불확실성 저감 및 안전성 증진에 기여할 것으로 판단된다.

The occupational health and safety accidents were continuously increased during handling, usage and manufacturing the chemical materials according to increase of small and medium sized enterprises in domestic industries. These accidents mainly resulted from insufficient occupational health and safety management and deteriorative facilities and focused on corresponding operation to minimize the damage of accidents after occurrence. But, it was required that we grasped the occurrence causes of occupational health and safety risk in handling, usage and manufacturing the chemical materials and develop the adequate corresponding operation and system according to the possible occurrence of occupational health and safety risk. This study deals with the development of risk assessment model to derive the risk and important risk of occupational health and safety and then help to construct the self-controlled occupational health and safety system for small and medium sized enterprises handling the chemical materials.

Steel industry in Korea is a key national industry that has led economic growth for a long time. And accidents occurred from a variety of causes has endlessly made as much as remarkable achievements of steel industry. It is a fact that research achievements of disaster prevention in steel industry has not been significantly, compared to production technique achievements. And the level of interest on safety management in the steel industry is conspicuously low. Although support activity for a various safety management are provided reasonably to prevent disasters occurring with subcontractors. A method capable of quantitative evaluation, applied to subcontractors in most business places are relatively rare except parent firms-leading places. This study is to make and show safety management activities to purcue in advance in conjunction with a parent firm through development of a more systematic and quantitative evaluation model for disaster prevention with steel industry subcontractors, and to contribute to disaster prevention in domestic steel industry through advanced safety management method, by applying a proposed evaluation model of safety management activities as subcontractors in steel industry.

Especially because of the distinctiveness that new experiments and research provoke coexistence of various risk factors, the researchers in university laboratory are being exposed to incidents that are difficult to predict. Due to the fact that the numbers of accidents that occur at the university laboratory are increasing, the necessity for laboratory safety management is on the rise. Most laboratory accidents are caused by the ability that can detect risk factors such as unsafe behavior or unsafe condition but is not working perfectly. In order to prevent researchers in advance from unsafe behavior or unsafe condition, effective safety education, systematic safety management, safe research environment, continuous safety check and proper measures after accident are the most important factors. In this study, survey was conducted in university laboratory to identify the factors that affect on safety management and to measure the safety management level. As a result, effective measures are proposed for the improvement of the safety management level.

A studies wish to present safety assessment table that is consisted of safety check-up, safety education, safety management for worker's safety management assessment about unit process. And safety management level was survey through case study that use safety assessment table. Safety management assessment table is improved safety management level of unit process, and is developed safety management system by worker confirms assessment items and improves problem.

Safety check-up and individual education, safety status wishes to present included safety assessment table for safety management assessment system construction about unit work process in Study. Safety management assessment table gives each grades about worker of unit work process, safety check-up, education, management and identifies merits and demerits of unit work process, it is that propose safety management assessment system that can reduce accident occurrence possibility.

The main objective of this study is to propose numerical guideline for the improvement of educational environment about high school girls. In order to analyze feature of the somatotype of the high school girls, analysis of this study was performed about 25 body parts such as height(7 parts), width(4 parts), thickness(4 parts), circumference(5 parts), length(4 parts), and body weight. For the specific comparison on body dementions, Mollison's comparison graph were used.

일정 규모 이상의 사장교와 현수교에는 자유장, 주탑, 보강거더에 지진가속도계가 부착되어 있다. 이 연구에서는 부착된 센서를 활용하여 지진발생 시에 긴급하게 지진안전성을 평가하는 방법을 제안하였다. 표준화된 시스템으로 긴급한 평가가 이루어지므로 센서 단위의 평가가 효과적이며, 경주, 포항지진에 대한 특수교량의 데이터 분석을 통하여 평가 방안을 도출하였다. 자유장, 교각기초, 앵커리지와 같이 지반 또는 지반과 인접한 위치에 설치된 가속도계는 최대가속도로 평가를 수행하고 주탑상부, 보강거더 등 구조물에 부착된 가속도계는 가속도의 변환을 통한 변위비교로 평가를 수행하는 것을 제안하였다.

이 연구에서는 사장교 및 현수교에 부착된 지진가속도계측기를 활용하여 교량의 안전성을 긴급하게 평가할 수 있는 기법을 제안한다. 실측된 지진가속도계측기의 상시 응답을 이용하여 구조해석 모델의 고유주파수와 비교를 통해 최대한 유사한 동적특성을 갖도록 모델링을 개선한다. 설계지진에 대한 지진해석을 수행하여 지진가속도계측기 설치 위치별 최대 변위를 도출하며, 도출된 변위는 사전에 관리기준치로서 시스템에 기 입력된다. 지진발생 시 실시간으로 측정된 가속도 시간이력을 필터링 후 2중적분을 통해 변위시간이력으로 변환한 뒤 최대 변위를 추출한다. 최종적으로 시스템에 기 입력된 관리기준치와 추출된 변위와의 비교를 통해 안전성을 평가한다. 경주지진 시 기록된 데이터를 활용한 12개 특수교량의 긴급 안전성평가 수행을 통해 제안된 방법의 적용성을 확인한다.

In this study is to develop hydrological and geotechnical analysis module and risk analysis and assessment tool for the development of the dam safety management decision-making support tool D-SMART. Analysis module is composed of two parts. One is the initial load probability result part to the hydrological and an earthquake characteristic, the other is system response probability result part.

The purpose of in this study to develop of the dam safety management assessment tool based risk assessment for the dam safety management paradigm shift. Therefore in this study is to develop hydrological and geotechnical analysis module and risk analysis and assessment tool for the development of the damsafety management decision-making support tool D-SMART.