본 연구는 노후화된 교량의 단면 보수를 위한 고성능 콘크리트 보수재료를 개발하는 것을 목표로 하여 진행하였다. 건식 숏크리트 방법을 사용하여 최적의 혼합비를 도출하기 위해 재료에 대한 기본 실험을 바탕으로 내구성 및 수밀성 측면에서 적합한 성능을 개발 하기 위한 실험을 진행하였다. 본 연구는 실리카 흄, 고로슬래그, 자연섬유 등을 혼합하여 각 변수별 차이를 비교하였으며, 압축강도, 소성 수축, 염소 이온 침투 저항성, 동결융해 실험을 통해 성능을 평가하였다. 본 연구 결과 실리카 흄과 천연 섬유를 혼합하여 내구 성 및 수밀성을 확보한 채 팽창제와 폴리머 분말수지를 혼입하여 적합한 성능을 가진 보수재료를 개발하기 위한 기초 연구를 완료하 였다. 이 보수재료는 압축강도, 동결융해 저항성, 소성수축 균열 저감성, 염소 이온 침투 저항성 측면에서 우수한 성능을 보여줄 것이 다. 본 연구에서 개발될 보수재료는 기존 보수 모르타르보다 성능이 우수하며, 건식 숏크리트 방식을 사용하기 때문에 작업 및 후처리 과정이 습식 숏크리트 방식보다 간단하여 소구 작업에 더욱 효율적일 것으로 판단된다.

PURPOSES : This study aimed to develop high-performance concrete repair materials for the cross-sectional repair of deteriorated bridge concrete. METHODS : To derive the optimal mix using the dry shotcrete method, experiments were conducted to develop an appropriate performance in terms of durability and watertightness based on basic experiments on materials. By mixing silica fume, GGBFS, and natural fibers, this study compared the differences in each variable. Each variable was compared using compressive strength, flexural strength, plastic shrinkage, chlorine ion penetration resistance, and freeze-thaw tests. RESULTS : By mixing silica fume and natural fibers, watertightness and durability were secured, and by adding an expansion material and polymer powder, a material that exhibited suitable performance as a repair material was developed. The material demonstrated suitable performance in terms of compressive strength, freeze–thaw resistance, plastic shrinkage crack resistance, and chlorine ion penetration resistance. CONCLUSIONS : The repair material developed in this study has a higher performance than repair mortar, and because it uses a dry shotcrete method, the process and post-processing are simpler than the wet shotcrete method; therefore, it is believed to be more efficient for repair work.

PURPOSES : Experimental findings pertaining to the mechanical properties and microstructures of calcium sulfo-aluminate (CSA) cement and amorphous calcium aluminate (ACA) cement based-repair mortars incorporated with anhydrite gypsum (AG) are described herein. METHODS : To prepare the mortars, the CSA or ACA as binders were adopted and the ratio of water–binder was fixed at 0.57. For comparison, mortar made of Type I ordinary Portland cement (OPC) was prepared. The fluidity, setting time, compressive and bond strengths and absorption of the mortars were measured at predetermined periods. In addition, the microstructures of paste samples using OPC, CSA or ACA were visually examined through SEM observation. RESULTS : The ACA-based mortars showed the increases in the fluidity, and the acceleration of the setting time. Furthermore, the ACAbased binder effectively enhanced the compressive and bond strengths of the mortars owing to amount of formation of C2AH8 hydrates. Meanwhile, the mortar with ACA showed an excellence absorption. CONCLUSIONS : Comparing with those of CSA-based mortars, the mechanical properties of ACA based-mortars were more remarkable. However, further studies regarding the durability of repair mortars using aluminate-based binders must be conducted to obtain the optimal mixture.

As the time and cost of body repair can be greatly incurred due to differences in individual technologies, body repair technology should be discussed based on data on general working standards and costs, and as new material technology is applied to the body, continuous learning and experiment on vehicle body repair technology is essential. Since the left and right apron and side members with SPR bonding technology are made of different materials, aluminum and high-strength steel, the restoration of the left and right apron side members should be considered technically, as well as safety and environmental pollution. In this study, we experiment with heterogeneous apron and side members applied with SPR bonding and analyze the results.

PURPOSES : Recently, interest in maintaining aged concrete pavements has been increasing. An asphalt overlay is generally used for pavement maintenance, and a tack coat is used to secure interlayer adhesion. Particularly, aged concrete pavements are required for higher adhesion performance of tack coats for attaching interlayers to materials with different properties. Insufficient interlayer adhesion could cause pavement damage, such as slippage, rutting, shoving, corrugation, and pothole. In this study, we examined the performance of interface adhesion by applying a tack coat material developed for maintaining aged concrete pavement. METHODS : In this study, we examined the effect of adhesion performance at the pavement interface, using a tack coat material developed for the maintenance of aged concrete pavement. RESULTS : The developed tack coat not only accomplished the performance objectives but also improved the results by more than 12 to 43%, compared to commonly used materials. CONCLUSIONS : The use of developed tack coat is expected to improve the interlayer adhesion and reduce the delay of the maintenance process in aged concrete pavement.

San-ja is one of the main members consisting of the roof of traditional wooden buildings in Korea. In this study, the regional characteristics of the materials used in San-ja and changes of the materials over time were examined. To this end, 123 documents on the repair of wooden architectural heritage recorded since the 1950s were reviewed. It was found that there was a difference in the San-ja material by region because of the diversity in the conditions of material supply. For instance, bamboo was the most frequently used material in Jeollanam-do province because it was readily available. However, with the development of transportation and vehicle, the regional characteristics have disappeared. As a result, the material has been unified with bamboo now. This is because bamboo is specified as a representative material in the specification or the convenience of construction is prioritized. In addition, the social and economic conditions at the time of repair had an influence on the selection of the San-ja materials.

PURPOSES: This study aims to evaluate the resistance to chemical attack of combined organic and inorganic hybrid mortars as the repair materials (i.e., HRM mortar) used for concrete road facilities through a comparison with mortars made from cement repair materials (i.e., IRM mortar). METHODS: Inorganic materials used as a binder and two mineral fillers were adopted to produce HRM mortars. The ratio of the main resin versus the hardener was fixed at 2:1. For comparison, IRM mortars made of cement repair materials were also manufactured. The mortars were exposed to chemical solutions, such as NaCl, MgSO4, Na2SO4, and H2SO4, with the same concentration of 5% after 7 days of curing. The compressive strength, compressive strength loss, mass ratio, and relative bulk density of the mortar samples exposed to the chemical solutions were measured at predetermined periods. In addition, a scanning electron microscope observation was performed to evaluate the microstructures and the products formed by the chemical reaction of the mortar samples. RESULTS : As a result, the resistance to chemical attack of the HRM mortars was found to be much better than that of the IRM mortars, regardless of the types of attacking sources. This finding implies that HRM is a highly promising and versatile material because of its excellent resistance to chemical attack. CONCLUSIONS: The application of the combined organic and inorganic hybrid mortars is a possible option for repair of concrete road facilities exposed to aggressive environments.

PURPOSES: The objective of this study is to evaluate the durable performance of combined organic and inorganic hybrid mortar as repair material (HRM mortar) for concrete road facilities via comparison with that of cement repair materials (IRM mortar). METHODS : To produce HRM mortars, inorganic materials as binder and 2 mineral fillers were adopted. The ratio of main resin versus hardener was fixed at 1:2. For comparison, IRM mortars made with cement repair materials were also manufactured. Compressive, flexural, and bonding strengths were measured at predetermined periods. For durability assessment, the scaling resistance, freezing & thawing resistance, rapid chloride penetration resistance, and acid attack resistance of those mortars were experimentally monitored. RESULTS: The durability performances of HRM mortars, especially with respect to freezing & thawing, rapid chloride penetration and acid attack, were identified to be much better than those of IRM mortars. This result implies that HRM is a highly promising and versatile material because of its excellent durability. CONCLUSIONS: It is concluded that the application of the combined organic and inorganic hybrid mortars is possibly an option for the repair of concrete road facilities exposed to aggressive environments.

PURPOSES : The objective of this study is to evaluate the performance of combined organic and inorganic hybrid mortar used as repair materials (UM mortar) for concrete road facilities by comparison with cement repair materials (RM mortar). METHODS: In order to produce UM mortar, four different levels of inorganic materials were adopted and the ratio of main resin to hardener was fixed at 1:2. For comparison, RM mortar made with cement repair materials was also produced. Fluidity, strength characteristics, length change, and freezing-thawing resistance of the mortars were measured at the predetermined periods. In addition, the microstructures of the mortars was performed on the 28-day mortar samples to examine the properties of the interfacial transition zone (ITZ). RESULTS : It was observed that the mechanical properties, except for compressive strength, and freezing-thawing resistance of UM mortars were much better than those of RM mortar. Furthermore, showing a densified ITZ properties on the UM mortars from the microstructural observation, the usage of UM mortars exhibited a beneficial effect on the enhancement of mortar properties. CONCLUSIONS: It is concluded that the application of combined organic and inorganic hybrid mortars is a possible option for the repair of deteriorated concrete road facilities.

Since the settlement of the underground ground occurred in Seok-Chon Underground Roadway in Seoul from August 2014, the social interest of ground stability has increased. Thus, in this paper, We introduce not only the legal counterplan about the ground settlement but also a result of study on how many new materials can be used in the repairing of ground settlement.

PURPOSES: This study aims to develop a repair material that can enhance pavement performance, inducing rapid traffic opening through early strength development and fast setting time by utilizing MgO-based patching materials for repairing road pavements. METHODS : To consider the applicability of MgO-based patching materials for repairing domestic road pavements, first, strength development and setting time of the materials were evaluated, based on MgO to KH2PO4 ratio, water to binder ratio, and addition ratio of retarder (Borax), by which the optimal mixture ratio of the developed material was obtained. To validate the performance of the developed material as a repair material, the strength(compressive strength and bonding strength) and durability (freezing, thawing, and chloride ion penetration resistance) was checked through testing, and its applicability was evaluated. RESULTS : The results showed that when an MgO-based patching material was used, the condensation time was reduced by 80%, and the compressive strength was enhanced by approximately 300%, as compared to existing cement-based repair materials. In addition, it was observed that the strength (compressive strength and bonding strength) and durability (freezing and thawing, and chloride ion penetration resistance) showed an excellent performance that satisfied the regulations. CONCLUSIONS : The results imply that an emergent repair/restoration could be covered by a rapid-hardening cement to meet the traffic limitation (i.e. the traffic restriction is only several hours for repair treatment). Furthermore, MgO-based patching materials can improve bonding strength and durability compared to existing repair materials.

PURPOSES : The objective of this study is to develop new pothole repair materials using polyurethane-modified asphalt binder, and to evaluate them relative to current pothole repair materials in order to improve the performance of repaired asphalt pavement. METHODS : In the laboratory, polyurethane-modified asphalt binder is developed, and then asphalt binder is added to produce pothole repair materials. In order to evaluate the properties of this new pothole repair material, both an indirect tension strength test and a direct tension strength test are performed to measure the material strength and bond strength, respectively. Additionally, the basic material properties are evaluated using the asphalt cold mix manual. The strength characteristics based on curing times are evaluated using a total of 7 types of materials (3 types of current materials, 2 types of new materials, and 2 types of moisture conditioned new materials). The indirect tension strength tests are conducted at 1, 2, 4, 8, 16, and 32 days of curing time. The bond strength between current HMA(Hot Mix Asphalt) and the new materials is evaluated by the direct tension strength test. RESULTS AND CONCLUSIONS : Overall, the new materials show better properties than current materials. Based on the test results, the new materials demonstrate less susceptibility to moisture, faster curing times, and an improved bond strength between HMA and the new materials. Therefore, the use of the new materials reported in this study may lead to enhanced performance of repairs made to asphalt pavement potholes.

PURPOSES: The purpose of this study was to break away from the workforce method using cold-mix asphalt mixtures and has a constant quality and has develop repair materials of pre-production asphalt-precast types. METHODS: The selection of the repair material was determined as the results obtained through physical properties of materials and the field applicability. In case of repair materials, values obtained through Marshall stability test & the dynamic stability test & retained stability test as well as the site conditions was considered. In case of adhesive, test results were obtained through examination of the bond strength(tensile, shear) and the field applicability of the adhesive was examined through combined specimens to simulate field applications. RESULTS : According to the results of laboratory tests, in the case of repair materials, Marshall stability and dynamic stability, retained stability of cold-mix reaction type asphalt mixture is the highest. In the case of adhesive, two-component epoxy-urea has a very high bonding strength(tensile, shear) was most excellent. According to the results of field tests, when epoxy-urea was excellent workability. Also, the repair body through actual mock-up test did not occur large deformation and fracture after 12 months. CONCLUSIONS : A suitable repair material is cold-mix reaction type mixture of asphalt-precast, a suitable adhesive is a two-component epoxy-urea.

Carbonation in concrete structures has been handled as the most fundamental and critical factor related to the durability of reinforced concrete. As a result, there have been efforts to develop repair materials to control carbonation As one of these efforts, alkali recovery agents have been presented as materials for increasing the re-alkalization and durability of carbonated concrete structures. However, in applying them in the field, the performance and quality of concrete recovered after an alkali recovery agent is applied has not been fully assessed. Therefore, to examine the recovered performance of concrete structures resulting from the application of an alkali recovery agent, the present study assessed the depth of carbonation and the degree of deterioration of 20 years or older reinforced concrete structures, and analyzed the quality of concrete after applying an alkali recovery agent to the structures. This study aimed at providing basic information for the application of alkali recovery agents in the field. In this experiment, alkali recovery agents of the lithium silicate line, which are most common in Korea, were applied and cured using concrete of the same size. The degree of recovery was investigated according to the length of time in the initial curing stage, and based on the investigation, the maintenance performance of the alkali recovery agent was assessed according to the age of exposure to the open air. For these tasks, this experiment sampled concrete of different degrees of deterioration, applied alkali recovery agents to them, and observed re-alkalization and changes in the internal texture of the concrete.

본 연구에서는 기존콘크리트와의 부착성능 및 수밀성을 향상하기 위해 기존의 현장에서 사용하는 초속경 시멘트에 PVA 분말수지, 나일론 섬유를 혼입한 보수재료를 개발하고 개발된 보수재료로 보수된 흄관의 보수 후 휨거동 평가를 수행하였다. 주요 실험변수는 PVA 분말수지, 나일론 섬유 혼입률 및 손상유형이며, 성능 실험으로는 압축강도와 보수재료 후 휨거동평가를 수행하였으며 개발된 보수재료는 PVA 분말수지 혼입량이 증가할수록 압축강도가 감소하는 경향이 나타났으며, 모든 배합에서 보수재료의 요구 성능을 충분히 만족하는 것으로 나타났다. 보수된 관 시험체들의 휨강도 실험결과, 나일론 섬유를 혼입하고 PVA분말을 적정량을 첨가하여야 보수재료의 성능이 최대가 되는 것으로 나타났다. 모든 시험체들의 휨거동은 다소 철근비가 작은 구조부재에서 나타나는 휨거동 양상을 보이는 것으로 나타나, 국내의 흄관에 배근되는 철선량이 다소 부족함을 추정할 수 있었다. 즉, 철선의 배근량이 다소 적어 콘크리트와 철선의 거동이 극한상태에 도달하기 전에 콘크리트에 균열이 발생되고 곧바로 콘크리트의 인장강도를 초과하여 파괴되는 것을 확인할 수 있었다.

다양한 원인에 의한 포장체에 손상이 발생하면 신속한 통행재개를 위한 급속보수가 필요하게 된다. 산화마그네슘인산염복합체의는 경화시간이 짧고, 조기 강도발현이 가능하여 급속보수재료로 적합한 특성을 갖고 있다. 연구에서는 경소마그네시아와 제1인산칼륨을 결합하여 보수재료로 개발하기 위하여 물-결합재(W/B)비, 마그네슘-인산염(M/P)비 등의 배합비를 조정하면서 경화와 강도특성을 평가하고자 하였다. 그리고 현장 적용시의 작업성을 확보하기 위하여 표준사와 일반모래에 따른 거동차이와 지연제별 특성을 평가하였다. 실험결과 물-결합재비는 35%내외와 마그네슘-인산염비는 1.0~1.2 내외가 강도측면에서 가장 적합한 것으로 분석되었다. W/B비 0.35, M/P비 1.2 변수에서 1일 강도 25.0MPa 이상 발현되어 조기 보수재료로서 활용가능성이 충분한 것으로 분석되었다. 작업시간 확보를 위해서는 붕산을 지연제로 사용하는 것이 적합한 것으로 나타났으며, 산화마그네슘의 순도는 90~95%내외가 경화시간 확보를 위해 효과적인 것으로 나타났다.

콘크리트 구조물은 시공 후 다양한 원인에 의해 물리적, 화학적 변형을 통해 물리적인 성능이 저하된다. 이러한 콘크리트 구조물의 성능저하는 사용수명을 감소하기 때문에 합리적인 보수보강이 필요하다. 최근 콘크리트 구조물의 효율적인 보수을 위해, 부착성능을 향상시킨 하이브리드 보수재료에 대한 연구가 활발히 수행되어오고 있다. 본 연구에서는 기존콘크리트와의 부착성능 및 수밀성을 향상시키기 위해 초속경 시멘트에 PVA 분말수지, 나일론 섬유, 라텍스를 혼입 한 하이브리드 보수재를 개발하였다. 보수재료의 성능평가를 위해 압축강도, 건조수축, 부착강도 실험을 수행하였다. 또한 미리 손상이 발생한 시험체를 제작한 후 보수 전후의 휨부착 성능평가를 수행하였다. 휨강도 평가결과, 기존의 초속경시멘트만 혼입한 시험체를 제외한 모든 실험체에서 110%~150%정도 휨강도가 크게 나타났고, 휨강도에 의해 발생된 균열패턴은 모든 실험체가 기존 콘크리트와 일체 거동하는 것으로 나타났다.