콘크리트 경화 시 발생하는 수분증발로 인한 건조수축은 콘크리트의 균열을 발생시킨다. 콘크리트에 발생하는 균열 은 콘크리트의 내구성을 저하하여 안정성과 사용성에 문제를 발생시킨다. 이러한 문제점을 보안하기 위해 콘크리트에 강섬유를 혼입하여 건조수축으로 인한 균열을 방지하는 강섬유 보강 콘크리트 (SFRC)에 관한 연구가 진행되고 있다. 강섬유는 콘크리트 의 균열단면에서 가교역할, 부착작용을 통해 건조수축으로 인한 균열발생을 억제하고 균열 폭을 감소시키는 효과가 있다. 본 논 문에서는 강섬유의 인장강도에 따른 강섬유 보강 콘크리트의 건조수축 제어성능을 평가하였다. 자유건조수축 실험과 구속건조 수축 실험을 진행하였으며 실험 결과를 콘크리트의 인장응력으로 변환하여 콘크리트 직접인장실험 결과와 비교하였다. 강섬유 의 자유건조수축 저감 효과는 미미하지만 강섬유의 인장강도가 증가할수록 구속건조수축으로 인한 균열제어에 효과적임을 확인 하였다. 또한 강섬유의 인장강도가 증가할수록 콘크리트의 인장응력이 증가함을 확인하였다.

본 연구는 초고성능 콘크리트의 성능을 보다 향상시키기 위해 현재 콘크리트 보강에 사용하는 섬유들을 조합한 복합 섬유를 제작하여 복합섬유 혼입 초고성능 콘크리트의 강도 특성을 분석하였다. 복합섬유 4종과 단일섬유 3종을 각각 혼입하여 유동성과 압축, 휨강도 실험을 진행하였다. 복합섬유와 단일섬유 혼입 시험체 모두 유동성 평가를 만족하였으며, 단일섬유가 조금 더 우수한 성능을 나타내었다. 강도 평가결과 파라아라미드 섬유와 강섬유를 조합한 복합섬유 2종이 가장 우수한 결과를 나타내었으며, 복합섬유 직경 차이에 따라 압축 및 휨강도 보강효과가 다르게 나타난 것을 확인할 수 있었다. 압축강도 감소를 최소화하며 휨강도를 증가시킨 결과를 통해, 복합섬유는 단일섬유 간의 단점을 서로 보완할 수 있을 것으로 판단되며, 본 연구를 통해 차후 콘크리트의 다양한 재료적 특성을 보강하는 복합섬유도 충분히 제작 가능할 것으로 판단된다.

Fly ash is used as alumina-silicate resource material to reaction processing on geopolymer materials. The strength of material is belonging to alkaline liquid, fly ash, activity reaction of fly ash. Geopolymer concrete as non-toxic, bleed free and high strength material can be used for construction on rigid pavement. Study on influence of polypropylene fiber on performance characteristic of geopolymer concrete is considered. In this research, the mix proportion with fly ash and alkaline liquid is used to react on geopolymer concrete. The poly-propylene fiber in range from 0 to 0.5% by volume is added in mixture of geopolymer concrete. The ratio between length and diameter in range of 100-500 is investigated. The results are indicated that workability of fresh concrete is reduced by using poly-propylene fiber. The adding of poly-propylene fiber is significantly affected on characteristic of geopolymer concrete. Poly-propylene fiber can be distributed in fly ash matrix and reduced shrinkage of concrete during activation. After geopolymerization, compressive and the flexural strength of concrete produced with fibers are enhanced up to 10% and 20%, respectively. However, when the length to diameter ratio increases, compressive strength is tended to decrease with mixture using polypropylene fiber.

PURPOSES:The objectives of this study are to evaluate moisture sensitivity of various asphalt mixtures and to suggest an alternate method for the dynamic immersion test, which is used to determine the application of anti-stripping agent, by analyzing bond strength.METHODS:The bond strength of various asphalt mixtures such as hot mix asphalt, warm mix asphalt, and polymer-modified asphalt was evaluated by the ABS test. In order to characterize moisture sensitivity at different temperatures of the mixtures, the ABS test was conducted at -10°C, 5°C, 20°C, 40°C, and 54°C under both dry and wet conditions. The concept of the bond strength ratio was applied for objective moisture sensitivity analysis. Moreover, the bond strength characteristic was compared to the dynamic immersion test to suggest an alternate method to determine the application of anti-stripping agent.RESULTS AND CONCLUSIONS :Overall, the polymer-modified asphalt demonstrates the highest bond strength characteristic regardless of moisture condition and temperature. The bond strength characteristic displays a highly reliable linear relationship from 5°C to 40°C, and the relationship could be used to predict bond strength at any intermediate temperature. Based on the analysis of bond strength and retained asphalt ratio, the bond strength value of 1254 kPa could be applied as a criterion for anti-stripping agent.

일반골재인 자갈, 모래와 중량골재인 산화 슬래그 및 자철광을 이용하여 5 종류의 콘크리트를 제작하여 감마선 차폐특성과 압축강도를 살펴보았다. 골재는 평균적인 크기에 따라 비교적 작은 크기의 잔골재와 큰 크기의 굵은 골재로 구분하여 사용하였다. 실험 결과 산화 슬래그 잔골재와 굵은 골재를 사용한 콘크리트가 일반 골재만을 이용하여 배합한 콘크리트 시 편보다 137Cs 감마선에 대해 2% 향상된 감쇠계수인 0.371 cm-1을 기록하였다. 각 시편들의 단위중량을 측정한 결과 자철광 잔골재와 산화 슬래그 굵은 골재로 배합한 조건의 단위중량이 가장 높은 3,175 kg·m-3이었다. 산화슬래그를 잔골재와 굵은 골재로 배합한 조건의 단위중량은 3,052 kg·m-3으로 최대 단위중량 조건보다 123 kg·m-3 낮았지만 감쇠계수는 오히려 0.012 cm-1 향상되었다. 골재들의 화학성분 분석결과 산화 슬래그는 자철광에 비해 마그네슘의 비율은 낮고 칼슘의 비율은 높아 구성에 있어서 차이를 보였다. 따라서 산화슬래그만을 골재로 사용한 경우 자철광을 잔골재로 사용한 경우보다 단위 중량은 낮았지만 마그네슘과 비교하여 원자번호가 큰 칼슘의 비율이 높아서 감마선 차폐성능이 향상된 것으로 생각된다. 중량골재가 배합된 모든 시편들은 일반 골재를 이용한 콘크리트보다 압축강도가 높았고, 산화슬래그와 자철광의 잔골재만을 사용한 경우 4주 양생 후 압축강도가 일반 콘크리트에 비해 45% 향상된 50.2 MPa을 기록하였다.

In this study, shaking table test has been carried out for the dual frame passive control system for seismic performance verification of the proposed system. The proposed system was separated into two independent frameworks that are strength resistant core and frame structure by connecting to the damper. Moreover, the seismic performance improvement of the proposed system has been verified by comparing and analyzing the experimental results of the proposed system with an existing core system. As a result of the shaking table test, acceleration and displacement responses of dual-frame vibration control system are decreased than those of the existing strength resistant type core system. In the case of the core system, while the damage was concentrated on the column of first floor, the damage of the dual system was dispersed in each layer. The damage also was concentrated on the damper, almost no damage occurs to the structural members. It has been emphasized that installed dampers in the proposed dual system reduce the input energy of whole structure by absorbing seismic input energy, which leads overall system damage to be reduced.

PURPOSES : This study was performed to evaluate the possibility of Indirect Tensile Strength (ITS) as a testing method that can predict cracking on pavement. METHODS: Three asphalt binders and one kind of aggregate were used in this study, and all asphalt mixtures were produced using Gyratory Compactor followed asphalt mix design. The ITS test was performed for the mixture which are artificially short-term aged using the oven. The ITS properties were analyzed by air void, compaction temperature, asphalt content, and asphalt binder. RESULTS: The results of this study indicated that (1) the compaction temperature did not show relationship with the ITS test; (2) there was no specific trend between the asphalt content and the ITS test; (3) the ITS could reveal the property of kinds of asphalt binders; (4) the asphalt mixture that were produced at optimum temperature suggested by manufacturer did not exhibit optimum result for all asphalt binder. CONCLUSIONS : The possibility of ITS was confirmed from this study for replacement of the Marshall Stability method. However, it needs to perform in further studies of aggregate and compaction property to suggest a new ITS standard value.

본 논문에서 알루미늄 하니콤 샌드위치판 구조(AHSP)의 특성에 대해 해석한 결과는 다음과 같다. 1) AHSP의 H/T비가 낮아질수록 응력이 감소하며, 셀 크기(H)보다는 코어의 두께(T)가 두꺼워질수록 강도와 강성이 증가함을 알 수 있다. 2) AHSP 구조가 동일한 질량에서부터 증가하면서 EASP 구조에 비해 2.5～6.0배 정도의 높은 강도를 보이는 것을 알 수 있다. 3) AHSP의 면재의 두께변화는 AHSP 전체의 강성에 별로 영향을 미치지 못했으나, 심재의 두께가 증가할수록 단면 2차 모멘트의 값이 커지기 때문에 AHSP의 강성이 매우 커짐을 알 수 있다. 4) EASP보다 강성이 큰 AHSP의 고유진동수가 크며, 진동 모드 사이의 차도 커짐을 알 수 있다. 5) 비교연구 결과 AHSP 구조가 EASP 구조보다 적은 질량으로 훨씬 더 높은 강성을 갖는, AHSP 구조의 우수성이 입증된다. 따라서 중량경감이 가장 중요한 문제 중의 하나인 초고속선 및 대형선의 경우 AHSP 구조가 높은 굽힘강성을 갖고 다른 재료에 비해 상대적으로 적은 중량이 필요하므로 구조 재료로서의 적합성을 알 수 있다.

플라즈마 용사법을이용하여 AISI 316 스테인레스 금속모재에 0.1mm 두께의 NiCrAlCoY2O3금속 결합층과 0.3mm 두께의 ZrO2(8wt%Y2O3) 세라믹층으로 구성된 이층 단열코팅층을 제조하였다. 코팅층의 미세조직, 금속결합층의 산화를 고찰하였으며, 900˚C에서 등은 시험과 열반복시험 후, 접합강도시험을 통하여 코팅층의 단사정 상은 열처리시간이 길어질수록 약간 증가하였다. 또한 비변태성 t'의 c/a는 용사상태에서 1.0099이였으며, 100시간 열처리 후에는 1.0115로 약간 증가하였다. 그리고 용사층의 접합강도는 열처리 시간이 길어질수록 감소하였다. 등온열처리 후에는 1.0115로 약간 증가하였다. 그리고 용사층 의 접합강도는 열처리 시간이 길어질수록 감소하였다. 등온열처리 후, 파괴는 주로 세라믹층에서 일어났으며, 반복 열처리되 시편에서는 10회 이후 대부분 금속결합층/세라믹층의 계면에서 일어났다.

It was found that the firming agent was satisfied in terms of mobility for improving compactibility and filling characteristics since reviewing the basic properties of the fluidized filler according to the types of firming agent in domestic market. But, it was difficult to secure adequate strength for re-excavation.

This paper describes the flexural characteristic of high strength steel fiber reinforced concrete (SFRC) prisms with different fiber tensile strength. All mixtures have specified compressive strength of 80 MPa and fiber volume fraction of 0.5% and 1.0%. In accordance with EN-14651, SFRC prisms were made and tested under bending loading. Test results indicated that steel fiber has no significant effects on compressive behavior of SFRC. However, flexural behavior of high strength SFRC was improved considerably with increase of fiber tensile strength.

By analyzing the compressive strength througth field test execution on the shotcrete mixture with 40% blast furnace slag and slurry accelerator, confirmed the suitability as subsea tunnel material. As a result, strength characteristic on the anti-chloride shotcrete is excellent evaluated in terms of compressive strength compared with existing shotcrete.

By analyzing the compressive strength througth field test execution on the shotcrete mixture with 40% blast furnace slag and slurry accelerator, confirmed the suitability as subsea tunnel material. As a result, strength characteristic on the anti-chloride shotcrete is excellent evaluated in terms of compressive strength compared with existing shotcrete.

In this study, the shear buckling strengths of the trapezoidal and sinusoidal corrugated plates with the same self-load were compared, and their characteristics and tendencies were analyzed. In the preceding comparative study of corrugation shapes, the corrugation wave depth and the corrugation wave angle were the same. As these target, A linear buckling analysis was conducted, and the differences in the shear buckling mode and the buckling stress were analyzed.

In this study, compressive capacity of a new form-block-wall (FBW) was studied through both the prism test and compressive strength test for single form-block. In the experiment, main variables are the difference in mix design of block and in strength of grout concrete. The result of prism test showed that the compressive strength of FBW was largely influenced by the strength of grout concrete while it was not influenced by the block‘s mix design difference.

Recently, field applications and researches for concrete using by-products, fly-ash, GGBS, etc, have been conducted. In case of GGBS, however, quality control and replacement amount is limited because of some disadvantages. In this study, high early strength concrete using GGBS was evaluated applicability for concrete structural material. In order to evaluate, compressive strength and shrinkage test were conducted.

This study evluated the Freeze-thaw and scaling resistance characteristic of high early-strength low heat cement concrete. The result Freeze-thaw and scaling resistance appeared to be excellent, and using high early-strength low heat cement can be applied to concrete structures of road facilities.