우리나라 해양환경에 유출되는 위험·유해물질(Hazardous Noxious Substances, HNS)의 해양환경 및 사회환경 영향평가 결과 와 HNS 확산 영역, 해양환경 정보, HNS 실태조사 결과 등 관련 연구 결과 및 자료를 정책결정자와 연구자들에게 공유할 수 있는 HNS 국내 용 플랫폼을 구축하고자 한다. 국내의 HNS 관리 및 배출 체계 마련을 위한 의사결정 지원이 가능하고 국내 실정에 적합한 플랫폼의 설계 를 위하여 유해물질의 데이터 관리 및 유출 시 대응 도구, 기초적인 정보 등 플랫폼에 관련된 기술동향을 분석하는 등 국내·외의 플랫폼 개발 사례를 고찰하였다. 유속 벡터의 전처리 기능 개발, 전처리 결과에 따른 동적 시각화 구현, 해양산업시설 배출 HNS의 유출량과 유출 범위의 전처리 모듈, HNS 해양환경 영향평가 연산 모듈 프로토타입을 개발하였다. HNS 해양환경 영향평가를 위한 국내용 HNS 플랫폼은 초기 위해성을 평가하고 대응 및 관련 법제화 시 과학적인 기초 도구로써 활용될 수 있을 것으로 기대된다.

For fast-built and safe precast concrete (PC) construction, the dry mechanical splicing method is a critical technique that enables a self-sustaining system (SSS) during construction with no temporary support and minimizes onsite jobs. However, due to limited experimental evidence, traditional wet splicing methods are still dominantly adopted in the domestic precast industry. For PC beam-column connections, the current design code requires achieving emulative connection performances and corresponding structural integrity to be comparable with typical reinforced concrete (RC) systems with monolithic connections. To this end, this study conducted the standard material tests on mechanical splices to check their satisfactory performance as the Type 2 mechanical splice specified in the ACI 318 code. Two PC beam-column connection specimens with dry mechanical splices and an RC control specimen as the special moment frame were subsequently fabricated and tested under lateral reversed cyclic loadings. Test results showed that the seismic performances of all the PC specimens were fully comparable to the RC specimen in terms of strength, stiffness, energy dissipation, drift capacity, and failure mode, and their hysteresis responses showed a mitigated pinching effect compared to the control RC specimen. The seismic performances of the PC and RC specimens were evaluated quantitatively based on the ACI 374 report, and it appeared that all the test specimens fully satisfied the seismic performance criteria as a code-compliant special moment frame system.

Aluminum alloys are widely utilized in diverse industries, such as automobiles, aerospace, and architecture, owing to their high specific strength and resistance to oxidation. However, to meet the increasing demands of the industry, it is necessary to design new aluminum alloys with excellent properties. Thus, a new method is required to efficiently test additively manufactured aluminum alloys with various compositions within a short period during the alloy design process. In this study, a combinatory approach using a direct energy deposition system for metal 3D printing process with a dual feeder was employed. Two types of aluminum alloy powders, namely Al6061 and Al-12Cu, were utilized for the combinatory test conducted through 3D printing. Twelve types of Al-Si-Cu-Mg alloys were manufactured during this combinatory test, and the relationship between their microstructures and properties was investigated.

Metal additive manufacturing (AM) has transformed conventional manufacturing processes by offering unprecedented opportunities for design innovation, reduced lead times, and cost-effective production. Aluminum alloy, a material used in metal 3D printing, is a representative lightweight structural material known for its high specific strength and corrosion resistance. Consequently, there is an increasing demand for 3D printed aluminum alloy components across industries, including aerospace, transportation, and consumer goods. To meet this demand, research on alloys and process conditions that satisfy the specific requirement of each industry is necessary. However, 3D printing processes exhibit different behaviors of alloy elements owing to rapid thermal dynamics, making it challenging to predict the microstructure and properties. In this study, we gathered published data on the relationship between alloy composition, processing conditions, and properties. Furthermore, we conducted a sensitivity analysis on the effects of the process variables on the density and hardness of aluminum alloys used in additive manufacturing.

우리나라는 무기질비료 사용량이 많은 나라 중 하나이다. 그러나 1980년 이후 지속가능농업에 대한 필요성에 의해 1997년 친환경 농업육성법이 제정되었고 지속가능한 농업을 위한 연구로 논, 밭, 시설 및 과수에 대한 비료사용실태조사가 실시되고 있다. 이에 본 연구는 과수 중 대표되는 7작물(배, 포도, 사과, 복숭아, 대추, 단감, 키위)을 대상으로 각 도에서 805농가를 선정하여 실시하였으며, 조사내용은 사용하는 비료의 종류, 사용량 등에 대해 농가를 방문하여 면접 청취조사하였다. 국내 과수작물의 성분별 평균 비료사용량(N-P2O5-K2O)은 30.0-23.8-24.3 kg 10a-1이었으 며 비료 종류별로 구분하였을 때 퇴비 > 유기질비료 > 무기질비료 순으로 사용하고 있었다. 단위면적당 가장 많은 비료를 사용하고 있는 과수는 대추로 질소, 인산 및 칼리를 평균 53.3-42.0-49.5 kg 10a-1을 사용하고 있는 것으로 확인되었다. 앞으로 지속가능 농업과 농업환경의 보전을 위해서는 농가에서 사용하는 비료의 장기간 모니터링 뿐만 아니라 농업인에게 무기질비료, 유기질비료 및 퇴비의 적정사용방법에 대한 교육 및 홍보를 지속적으로 실시해야 될 것으로 판단된다.

As the demand for ready-to-eat foods continues to grow, concerns about the sodium in processed foods are also growing. In this study, a survey was conducted on the perception of low-sodium products and diffusion plans according to the type of employee (manufacturer, retailer, distributor). Of the 191 responses collected, 189 valid responses (98.9%) were analyzed. The results showed that the employees were aware of the health contribution of a low-sodium diet, labeling for low-sodium, and the promotion of low-sodium food to increase its consumption. Furthermore, retailers recognized the positive contribution of low-sodium products in terms of Environmental, Social, and Governance (ESG) management. The use of sodium substitutes was preferred as the best way to reduce sodium in ready-to-eat foods. With regard to sodium reduction in readyto- eat foods, we found that the technical factors involved were clustered by the type of business. Specifically, distributors showed a similar performance but had a lower perception of importance than retailers. Manufacturers had a lower perception of both importance and performance. In this study, we collected perceptions from employees who were working at food companies, which differed from previous research. We sought to examine the differences in the perception of sodium reduction and consumption of ready-to-eat foods across various types of employment. Furthermore, we provided specific approaches to reduce perception gaps and enhance understanding among employees.

The World Vegetable Center (WorldVeg) maintains the world’s largest public vegetable germplasm collection. The Genebank contains over 65,000 accessions and consists of more than 130 genera and 330 species. It includes around 12,000 accessions of indigenous vegetables. The WorldVeg Korea Office (WKO) has been conducting regional adaptability evaluations in the fields of the National Institute of Horticultural and Herbal Science (NIHHS), with a focus on major solanaceous vegetable crops such as tomato, chili, and bell pepper. As climate change significantly affects vegetable crop productivity, the development of high-performing cultivars, tolerant to various abiotic and biotic stresses with enriched nutrients inside, is essential to enhance agricultural sustainability and human health. In this regard, the evaluation of growth and horticultural characteristics of pepper and tomato accessions from the WorldVeg will help contribute to the generation of new and improved cultivars, to address global challenges that affect food security, sustainability, and adaptation to climate change. Here, we summarize our activities and the results of the regional adaptability evaluation using the WorldVeg accessions of pepper and tomato germplasms.

본 연구는 국내 차나무 품종을 대상으로 연평균 기온이 낮은 봉화군에 식재하여, 봉화지역 차나무 재배 가능성을 검토하고자 연구를 수행하였다. 봉화군 시험지 토양 조사 결과, 시험지별 토양의 pH, EC, 치환성양이온, 유효인산은 적정수준이었으며, 유기물 함량은 대체로 낮은 수치로 조사되었 다. 봉화군 시험지 기온 조사 결과, 최저 기온은 소천면이 -14.1℃로 가장 낮았고, 다음으로 춘양면 -12.6℃, 명호면 -12.6℃, -10.2℃ 순으로 모든 시험지는 -10℃ 이하의 낮은 온도로 조사되었다. 차나무 재배 생육평가 결과, 명호면 시험지에서 생육 정도가 가장 우수하였고, 다음으로 소천면, 온실, 춘양면 순으로 조사되었다. 또한, 재배품종 보향과 대조품종 다산은 시험지 생장량과 광합성량이 다른 수종에 비해 높은 것을 확인하였 다. 봉화지역과 하동지역에 식재된 참녹의 주요 생리활성물질인 catechin과 caffeine 함량을 조사한 결과, Catechin 함량은 EGC와 EC, EGCG 함량은 하동이 높게 조사되었고, 반면 ECG는 봉화지역의 참녹이 월등히 높았다. 총 catechin 함량은 봉화 5.23%, 하동 5.22%로 비슷하게 나타났다. Caffeine 함량은 봉화 0.05%, 하동 0.38%로 하동지역의 참녹이 높게 나타났다. 본 연구에서 봉화군 차나무 재배 생육평가 결과 명호면, 소천면이 차나무 재배에 유리할 것이며, 봉화지역 차나무 재배 시 재배품종 보향과 대조품종 다산은 재배 적응성이 높을 것으로 판단된다.

This study presents a dry precast concrete (PC) beam-column connection, and its target seismic performance level is set to be emulative to the reinforced concrete (RC) intermediate moment resisting frame system specified in ACI 318 and ASCE 7. The key features include self-sustaining ability during construction with the dry mechanical splicing method, enabling emulative connection performances and better constructability. Test specimens with code-compliant seismic details were fabricated and tested under reversed cyclic loading, which included a PC beam-column connection specimen with dry connections and an RC control specimen. The test results showed that all the specimens failed in a similar failure mode due to plastic deformations in beam members, while the hysteretic response curve of the PC specimen showed comparable and emulative performances compared to the RC specimen. Seismic performance evaluation was quantitatively addressed, and on this basis, it confirmed that the presented system can fully satisfy all the required performance for the intermediate RC moment resisting frame.

선박 연료로서 LPG는 현재의 기술과 경제성 등을 고려하였을 때 매력적인 연료이다. 하지만, 아직 LPG 연료 선박의 안전 지침 을 개발 중에 있고, 국내에서는 중소형 선박에 LPG 추진 시스템을 적용한 사례가 없다. 본 연구에서는 국내 최초 개발된 해상용 LPG 엔 진 시스템에 대해 보다 객관적인 위험성 평가를 수행하고 안전 운용 기준을 제안하고자 한다. 우선, 위험과 운전 분석 기법을 통해 동 엔 진 시스템을 5개의 검토 구간으로 분할하고 총 58가지의 위험요소를 식별하였다. 그다음 정성적 평가인 HAZOP 기법의 주관성을 보완하 기 위해 퍼지 이론을 사용하고 검출도, 민감도 등 위험 요인을 추가하여 퍼지 분석적 계층 과정을 통해 위험 요인의 상대적 가중치를 비 교하였다. 그 결과, 5가지의 위험 요인 중, 위험성에 가장 큰 영향을 미치는 위험 요인은 발생 빈도와 심각도로 평가되었다. 마지막으로, 위험 요인에 대한 가중치를 고려하여 위험 순위를 세밀하게 선정하기 위해 퍼지 TOPSIS 기법을 적용하였다. 그 결과, 위험 등급은 47개 그룹으로 구분할 수 있었고, 동 엔진 시스템의 운용 중 가장 위험도가 높은 위험요소는 LPG 공급 라인 유지 보수 중 가스 누출로 분석되 었다. 본 연구에 제안된 기법을 LPG 공급계통 등 다양한 설비에도 적용하여, 향후 LPG 추진 선박의 안전 기준 마련을 위한 위험성 평가 의 표준절차로 활용할 수 있기를 기대한다.

Demand for research on the use of hydrogen, an eco-friendly fuel, is rapidly increasing in accordance with global environmental problems and IMO environmental regulations in the shipbuilding and marine industry. In the case of hydrogen, similar to liquefied natural gas, it has a characteristic that its volume decreases hundreds of times during phase transformation from gas to liquid, so it must be stored in a tank in the form of liquefied hydrogen for transport efficiency. The material of the liquid hydrogen tank is selected in consideration of mechanical properties and hydrogen embrittlement at cryogenic temperatures. In this study, welding research was conducted on STS316L material, which was most commonly used in the space industry. In this study, flux cored arc welding was performed under 4 welding conditions to derive the optimal welding conditions for STS316L material, and then mechanical properties of the welded part were compared and analyzed.

The objective of this study is to evaluate the antioxidant components, elastase inhibition activities, and melanin synthesis rates of Korean traditional Actinidia (Actinidia arguta) fruits and leaves depending on the ethanol extraction concentrations. The total polyphenol content was the highest in the 50% ethanol extract of both fruits and leaves, with values of 634.1 mg GAE/100 g and 3,985.2 mg GAE/100 g, respectively. The total flavonoid content was the highest in the fruit 90% extract and leaf 50% extract at 191.9 mg/100 g and 2655.6 mg/100 g, respectively. The vitamin C content was the highest in the 50% extract of leaves at 2990.3 mg/100 g. Elastase inhibition was the highest at 56.9% in the leaf 50% extract at a concentration of 1,000 μg/mL. Melanin synthesis inhibition showed the highest melanin synthesis inhibitory effect among the extracts, as the leaf 50% extract showed an inhibitory rate of 65% or more. Therefore, the antioxidant components, elastase inhibition activities, and melanin synthesis inhibitory rate were better in leaves than in fruits. The leaf 50% extract was particularly the best among the extracts. Korean traditional Actinidia leaves can be considered as potential sources for new functional materials.