Hydrogen cyanide (HCN) and hydrogen isocyanide (HNC) are isomers with similar chemical properties. However, HNC can be converted into other molecules by reactions with atomic hydrogen (H) and atomic oxygen (O), resulting in a variation of the HCN/HNC abundance ratio. These reaction rates are sensitive to gas temperature, resulting in different abundance ratios in different temperature environments. The emission of HCN and HNC was found to distribute along ring structures in the protoplanetary disk of V883 Ori. HCN exhibits a multi-ring structure consisting of inner and outer rings. The outer ring represents a genuine chemical structure, whereas the inner ring appears to display such characteristics due to the high dust continuum optical depth at the center. However, HNC is entirely depleted in the warmer inner ring, while its line intensity is similar to that of HCN in the colder outer ring. In this study, we present a chemical calculation that reproduces the observed HCN/HNC abundance ratio in the inner and outer rings. This calculation suggests that the distinct emission distribution between HCN and HNC results from a currently ongoing outburst in V883 Ori. The sublimation of HCN and HNC from grain surfaces and the conversion of HNC to HCN determine their chemical distribution in the heated, warm inner disk.
Background: Balance is the foundation of performing daily activities, and has been proven to be improved by various compression materials. As a new and never-before-seen means, the floss band improves joint range of motion, increases muscle flexibility, and affects balance. Several studies using the short-term application of a floss band to the ankle have been conducted. However, long-term effects of the floss band on the knee warrant further research. Objectives: This study aims to examine the long-term benefits of strength exercises with a floss band applied to the knee for static and dynamic balance. Design: Quasi-experimental design. Methods: A total of 28 participants (four men and 24 women, aged 20–60 years) with no orthopedic knee conditions were recruited and randomized into two groups, with 14 in the group using the strength exercises with floss bands applied to the knee (the floss band group), and 14 in the group using internal rotation of the tibia during mobilization with movements (MWM; the MWM group). A physical therapist with 10 years of clinical experience applied the intervention 10 times, measuring static and dynamic balance before and after the intervention using the Balance Trainer 4. Independent t-tests and paired t-tests were used for statistical analysis, with a significance level of ⍺=.05. Results: Statistically significant effects for static balance and dynamic balance were observed in the comparison from pre- to post-intervention between the floss band and MWM groups (P<.05). Additionally, a statistically significant effect for dynamic balance was noted in the pre- to post-intervention comparison in the floss band group (P<.05). Conclusion: The strength exercises with floss bands applied to the knee are expected to have a long-term effect on improving dynamic balance.
The electrochemical properties of a CFX cathode were improved by defluorination of the surface with a N2 plasma and using a silica wafer. Compared to the N2 plasma treatment alone, when the CFX and silica were reacted together, the C-F bonds were modified and the surface was etched efficiently, so defluorination was enhanced. An electrochemical analysis confirmed that Half-cells prepared by treating CFx and silica with nitrogen plasma exhibited a capacity of about 400 mAh/g at 5C. In addition, it was confirmed that the loss of charge transfer was reduced by up to 71% compared to that for pristine CFX. As shown by a GITT analysis, when the CFx and silica were treated with N2 plasma together, the ion conductivity gradually increased due to a decrease in the ion diffusion barriers and the formation of a carbon layer. Therefore, this is a simple and effective way to improve the conductivities of CFX cathode materials with the energy of a N2 plasma and the silica-fluorine reaction.
This paper explores the potential application of carbon nanotubes (CNTs) in the construction industry, as CNTs can effectively serve as nano-fillers, bridging the voids and holes in cement structures. However, the limited dispersibility of CNTs in water necessitates the use of dispersing agents for achieving uniform dispersion. In this study, two kinds of cement superplasticizers, polycarboxylate ether (PCE) and sulfonated naphthalene formaldehyde (SNF) were employed as dispersing agents to improve the interfacial affinity between CNTs and cement, and to enhance the strength of the cement nanocomposites. Contact angle experiments revealed that the utilization of PCE and SNF effectively addressed the interface issues between CNTs and cement. As a result, the cement nanocomposite with a CNT to PCE ratio of 1:2 exhibited an approximately 6.6% increase in compressive strength (73.05 MPa), while the CNT:SNF 1:2 cement composite showed a 4.7% increase (71.72 MPa) compared to plain cement (68.52 MPa). In addition, the rate of crack generation in cement nanocomposites with CNTs and dispersing agents was found to be slower than that of plain cement. The resulting cement nanocomposites, characterized by enhanced strength and durability, can be utilized as safer materials in the construction industry.
This study investigates the negative perceptions (veganphobia) held by consumers toward vegan diets and fashion and aims to foster a genuine acceptance of ethical veganism in consumption. The textual data web-crawled Korean online posts, including news articles, blogs, forums, and tweets, containing keywords such as “contradiction,” “dilemma,” “conflict,” “issues,” “vegan food” and “vegan fashion” from 2013 to 2021. Data analysis was conducted through text mining, network analysis, and clustering analysis using Python and NodeXL programs. The analysis revealed distinct negative perceptions regarding vegan food. Key issues included the perception of hypocrisy among vegetarians, associations with specific political leanings, conflicts between environmental and animal rights, and contradictions between views on companion animals and livestock. Regarding the vegan fashion industry, the eco-friendliness of material selection and design processes were seen as the pivotal factors shaping negative attitudes. Furthermore, the study identified a shared negative perception regarding vegan food and vegan fashion. This negativity was characterized by confusion and conflicts between animal and environmental rights, biased perceptions linked to specific political affiliations, perceived self-righteousness among vegetarians, and general discomfort toward them. These factors collectively contributed to a broader negative perception of vegan consumption. In conclusion, this study is significant in understanding the complex perceptions and attitudes that consumers hold toward vegan food and fashion. The insights gained from this research can aid in the design of more effective campaign strategies aimed at promoting vegan consumerism, ultimately contributing to a more widespread acceptance of ethical veganism in society.
ㅊThis study aims to analyze fashion design cases using traditional elements based on the research and analysis of traditional folk cultural paper-cutting crafts in China, and to expand the area of fashion design using traditional elements by developing 3D digital fashion design. For herein, the techniques and characteristics of Chinese paper-cutting crafts were investigated. This survey facilitated an analysis of the formative characteristics of battery crafts in contemporary fashion design. As for the analysis case, the case of using battery crafts expressed in modern fashion for 10 years from 2010 to 2024 S/S was selected. The results are as follows. First, the typical characteristics of Chinese paper cutting technology—relief, micro-carved, combined with relief and micro-carved expressive techniques of engraving art effect— can be explored by analyzing contemporary fashion case collections through the perspective and trend of leading traditional culture. Second, in the traditional paper cutting process, most paper-cutting works are expressed in red, but white and black are mainly used in fashion, in addition to the active use of the five colors. Third, the characteristics of contemporary fashion patterns primarily utilize the paper-cutting process, incorporating elements such as plants, animals, and geometric patterns. Fourth, the utilization of paper cutting in 3D digital design offers time and economic benefits, allowing for quick adjustments to various design developments. In contemporary fashion, it is expected that the use of paper cutting can provide useful creativity and value for the inheritance and modernization of traditional culture.
This study aimed to evaluate the efficiency of combining acidification with adsorbents (zeolite and biochar) to mitigate the environmental impacts of pig slurry, focusing on ammonia (NH3) emission and nitrate (NO3 -) leaching. The four treatments were applied: 1) pig slurry (PS) alone as a control, 2) acidified PS (AP), 3) acidified pig slurry with zeolite (APZ), and 4) acidified pig slurry with biochar (APB). The AP mitigates NH3 emission and NO3 - leaching compared to PS alone. Acidification reduced the cumulative NH3 emission and its emission factor by 35.9% and 12.5%, respectively. The APZ and APB increased NH4 +-N concentration, with the highest level in APB, compared to AP. The NH4 + adsorption capacity of APB (0.90 mg g-1) was higher than that of APZ (0.63 mg g-1). The APB and APZ treatments induced less NH3 emission compared to AP. The cumulative NH3 emission was reduced by 12.2% and 27.6% in APZ and APB, respectively, compared to AP treatment. NO3 - leaching began to appear on days 12 and 13, and its peak reached on days 16 and 17, which were later than AP. The cumulative NO3 - leaching decreased by 17.7% and 25.0% in APZ and APB, respectively, compared to AP treatment. These results suggest that combining biochar or zeolite with acidified pig slurry is an effective method to mitigate NH3 emission and NO3 - leaching, with biochar being particularly effective.
목적: 본 연구는 실명을 유발하는 3대 주요 안질환의 연도별 유병률 추이를 관찰하고, 이들 질환의 인지율과 치 료율 비교와 관련 요인을 분석하고자 하였다. 방법: 질병관리청 국민건강영양조사 제8기(2019~2021년도) 조사에 참여한 대상자 중 만 40세 이상인 성인들을 대상으로 녹내장, 황반변성, 당뇨병성 망막병증의 유병률, 인지율과 치료율을 연도별로 비교하고 일반적 특성을 분 석하였다. 결과: 3대 주요 안질환의 연도별 추이를 보면 녹내장의 유병률은 매년 일정한 추이를 보이지만 당뇨망막병증의 유병률은 당뇨병 유병율과 함께 해마다 증가하고 있다. 연도별 인지율과 치료율은 다른 질환에 비해 녹내장이 높은 편이었으며, 황반변성의 인지율이 상당히 낮게 나타났다. 녹내장과 황반변성은 나이가 주요한 변수였으며, 황반변 성은 교육수준이 높아질수록 인지율과 치료율이 유의하게 높아지는 것으로 나타났다. 한편 당뇨병성 망막증의 경 우, 알코올 섭취는 인지율과 치료율을 감소시키는 것으로 나타났다. 결론: 본 연구를 통해 3대 주요 안질환의 인지율과 치료율에 대한 차이를 비교할 수 있었으며, 치료율에 미치는 다양한 요인 또한 확인할 수 있었다.
This study emphasizes R&D as a management strategy for small and medium-sized manufacturing enterprises (SMEs) to achieve competitive advantage and aims to analyze the impact of innovation resistance, prior knowledge, and technological capability on the intention to adopt R&D. The research targeted 403 decision-makers from SMEs that have not adopted R&D. The analysis revealed the following key findings: As a result, both technical capabilities and prior knowledge had a negative effect on innovation resistance. In addition, technological capabilities and prior knowledge had a positive effect on adoption intention, and innovation resistance had a negative effect on acceptance intention. The indirect effects of technical capabilities and prior knowledge both had a positive impact. In addition, we tested whether dependency on partners and trading organizations that accepted R&D had a moderating effect, but it was not significant. The academic implications of this study provide a detailed analysis of how prior knowledge and technological capability affect innovation resistance in SMEs and verify the intention to adopt R&D. The practical implications suggest a direction for small and medium-sized enterprises to reduce innovation resistance in accepting R&D, and companies need to recognize the suitability of R&D and recognize the importance of technological capabilities and prior knowledge in order to reduce innovation resistance.
From 2020, Korean Animal and Plant Quarantine Agency has reset the withdrawal time (WT) for veterinary drugs typically used in livestock in preparation for the introduction of positive list system (PLS) program in 2024. This study was conducted to reset the MRL for tiamulin (TML) in broiler chickens as a part of PLS program introduction. Forty-eight healthy Ross broiler chickens were orally administered with TML at the concentration of 25 g/L (TML-1, n=24) and 50 g/L (TML-2, n=24) for 5 days through drinking water, respectively. After the drug treatment, tissue samples were collected from six broiler chickens at 1, 2, 3 and 5 days, respectively. According to the previously established analysis method, residual TML concentrations in poultry tissues were determined using LC-MS/MS. In TML-1, TML in all tissues was detected less than LOQ at 2 days after drug treatment. In TML-2, TML in liver and kidney was detected more than LOQ at 2 days after treatment. According to the European Medicines Agency’s guideline on determination of withdrawal periods, withdrawal periods of TML-1 and TML-2 in poultry tissues were established to 0 and 2 days, respectively. In conclusion, the estimated WT of TML in poultry tissues is shorter than the current WT recommendation of 5 days for TML in broiler chickens.
목적 : 눈의 피로는 작업환경에 의해 영향을 받을 수 있고, 작업환경의 만족도가 달라질 수 있다. 본 연구는 산 업안전보건연구원의 제6차 근로환경조사(2020년) 원시자료를 이용하여 눈의 피로를 일으킬 수 있는 유해한 작업환 경에 대해 알아보고자 하였다. 방법: 제6차(2020년) 근로환경조사 자료 중 작업환경에서 눈의 피로를 느끼는지에 대해 응답한 49,974명을 대상으 로 성별, 나이, 학력 등의 일반적인 특성과 작업특징, 작업환경에 대한 만족도 등의 관계를 분석하였으며, p<0.050인 경우 유의한 값으로 판단하였다. 결과 : 고온과 저온 등의 이상온도와 화학물질 노출, 먼지나 흄의 흡입이나 유해한 가스 흡입 등과 같은 유해한 작업환경은 근로자들의 눈 피로를 증가시키는 것으로 나타났고, 이로 인해 근로자들의 작업환경만족도 저하를 야기 할 수 있는 요인으로 작용한다는 것을 알 수 있었다. 결론 : 유해한 작업환경은 근로자들의 눈 피로를 증가시키며 작업환경만족도를 저하시킬 수 있기에 눈 피로를 유발할 수 있는 다양한 유해환경에 대한 연구가 필요하다는 것을 확인하였다.
Severe Fever with Thrombocytopenia Syndrome (SFTS) is a newly emerging tick-borne disease caused by the SFTS virus (SFTSV), which belongs to the phlebovirus in the Bunyaviridae family. SFTSV is enveloped with a tripartite ambisense RNA genome. The L segment encodes the viral RNA-dependent RNA polymerase, the M segment encodes the two glycoproteins, Gc and Gn, and the S segment encodes the nucleoprotein (NP) and the nonstructural protein (NSs). NP participates in ribonucleoprotein (RNP) packaging and commonly detected early after infection, suggesting that the N protein is possible to be used as a target antigen for early diagnosis of SFTSV infection. In this study, we analyzed a highly immunogenic multi-epitope using GnGc and NP genes from a consensus sequence of SFTSV strain isolated from infected patients in Korea. The selected genes are constructed to the expression vector plasmid pJHL65 and the recombinant plasmid vector was transformed into the Δasd Δlon ΔcpxR Salmonella Typhimurium attenuated strain JOL912 and the expression of these antigens was verified by immunoblotting assay. We observed the significant levels of systemic IgG and mucosal IgM responses against the JOL912-derived antigen in the immunized BALB/c mice. The level of CD3+CD4+, CD3+CD8+ T lymphocyte subpopulation and TNF-α were also highly regulated in splenic T cells re-stimulated in vitro with NP and Gn/Gc multi-epitope selected antigens. Therefore, immunized mice with NP and Gn/GC multi-epitope recombinant proteins of attenuated Salmonella delivery system elicited T cell-related immune response, inducing an effective immune response. In conclusion, the attenuated Salmonella expressing NP-GnGc multi-epitopes could be a novel vaccine candidate against the SFTS virus.
With the advent of the 4th Industrial Revolution, changes in the market environment and employment environment are accelerating due to smart technological innovation, and securing professional manpower and developing human resources for domestic small and medium-sized enterprises is becoming very important. Recently, most of the domestic small and medium-sized enterprises are experiencing hiring difficulties, and the development and training of human resources to overcome this is still lacking in systemization, despite much support from the government. This reflects the reality that it is not easy to invest training costs and time to adapt new employees to small and medium-sized businesses. Based on these problems, the work-study parallel project was introduced to cultivate practical talent in small and medium-sized businesses. Work-study parallel training is carried out in the form of mentoring between corporate field teachers and learning workers in actual workplaces, and even if the training is the same, there are differences depending on the learner's attitude, learning motivation, and training achievement. Ego state is a theory that can identify personality types and has the advantage of being able to understand and acknowledge oneself and others and intentionally improve positive factors to induce optimized interpersonal relationships. Accordingly, the purpose of this study is to analyze the attitudes of learning workers, who are the actual subjects for improving the performance of work-study parallel projects and establishing a stable settlement within the company, based on their ego status. Through this study, we aim to understand the impact of the personality type of learning workers on training performance and to suggest ways to improve training performance through work-study parallelism.