Rainfall infiltration velocity into the surface of the earth is influenced by time sequential change of the urban surface spatial structure following urban expansion, and is the key factor in determining runoff discharge. In this regard, a comprehensive assessment and understanding of surface runoff associated with land cover change, as well as the changed structure of the landscape, is required to establish landscape planning. Sustainable development, planning and maintenance of the green space inside the city, based on results of the above, are a fundamental countermeasure for relieving fragmentation of the urban green space and increasing urban flood damage, directly or indirectly. In this study, we conducted analysis of landscape structure and change of Surface Runoff Reduction Capacity (SRRC) using the land cover maps from 1975 to 2000 at the lower reaches of the Jungrang stream (LRJS). The results are expected to provide baseline data for sustainable landscape planning that is ecologically healthy and can improve SRRC during torrential rains. The results of this study are as follows. Analysis of the results showed that land cover type underwent a remarkable change in terms of the total area of farm and urban types from 1975 to 2000. The total area of farm decreased by approximately 27.05% during the 25 years, while that of urban increased by approximately 25.61%. In this regard, the results of the landscape structure assessment using FRAGSTATS showed reciprocal tendencies, which intensified fragmentation of the landscape, as measured by all 6 of the selected factors, including LPI, NP, PD, LSI, AI and PLADJ. The Runoff Curve Number (CN) value steadily increased in the results of the time series landscape change assessment of the SRRC from 1975 to 2000. Based on analysis of the changed area associated with SRRC classes, the high SRRC class 1 area showed a steady decrease in accordance with the progression of the time series land use change associated with urban development.

Lignocellulosic biomass conversion to biofuels such as ethanol and other value-added bio-products including activated carbons has attracted much attention. The development of an efficient, cost-effective, and eco-friendly pretreatment process is a major challenge in lignocellulosic biomass to biofuel conversion. Although several modern pretreatment technologies have been introduced, few promising technologies have been reported. Microwave irradiation or microwave-assisted methods (physical and chemical) for pretreatment (disintegration) of biomass have been gaining popularity over the last few years owing to their high heating efficiency, lower energy requirements, and easy operation. Acid and alkali pretreatments assisted by microwave heating meanwhile have been widely used for different types of lignocellulosic biomass conversion. Additional advantages of microwave-based pretreatments include faster treatment time, selective processing, instantaneous control, and acceleration of the reaction rate. The present review provides insights into the current research and advantages of using microwave-assisted pretreatment technologies for the conversion of lignocellulosic biomass to fermentable sugars in the process of cellulosic ethanol production.

스티픈 밀러의 『일요일의 특이한 이력』은 대서양 양안의 영어 사용 저술가 들의 일요일에 관한 다양한 생각을 살피는 책이다. 그들 중에는 목사, 화가, 소 설가, 시인, 철학자, 비평가 등이 포함된다. 밀러는 기독교인들을 대강 세 그룹 즉 준수자들, 실천하지 않는 자들, 타락한 자들로 나누었다. 준수자들에게 일요 일은 성일이며, 또 다른 이들에게 일요일은 성일이자 휴일이다. 일요일을 성일 로 아는 사람들은 보통 엄격한 일요일 준수로 몰아가는 안식일 준수자라 불린 다. 안식일 준수 가정에서 자란 작가들은 대개 우울한 일요일을 지냈으며 그들 은 어린 시절의 경험에 대하여 부정적으로 반응하였다. 일요일에 관한 논쟁들은 종교개혁 이후 역사를 통하여 성과 속 두 축 사이에서 우왕좌왕하는 흐름을 이 루어 온 것으로 보인다. 현재 철저한 안식일 준수 강조의 힘이 약하지만, 곧 강 한 힘으로 돌아올 수 있을 것이다. 밀러의 책은 많은 자료를 섭렵하였다. 매우 흥미롭고 지식이 풍부한 책이지만 가끔 산만한 것이 흠이다.

We developed a polymerase chain reaction (PCR)-based molecular method for sexing and identification using sexual dimorphism between the Zinc Finger-X and -Y (ZFX-ZFY) gene and polymerase chain reaction-restriction fragment length polymorphism (PCR-RFLP) for mitochondrial DNA (mtDNA) cytochrome B (CYTB) gene in meat pieces and commercial sausages from animals of different origins. Sexual dimorphism based on the presence or absence of SINE-like sequence between ZFX and ZFY genes showed distinguishable band patterns between male and female DNA samples and were easily detected by PCR analyses. Male DNA had two PCR products appearing as distinct two bands (ZFX and ZFY), and female DNA had a single band (ZFX). Molecular identification was carried out using PCR-RFLP of CYTB gene, and showed clear species classification results. The results yielded identical information on the sexes and the species of the meat samples collected from providers without any records. The analyses for DNA isolated from commercial sausage showed that pig was the major source but several sausages originated from chicken and Atlantic cod. Applying this PCR-based molecular method was useful and yielded clear sex information and identified the species of various tissue samples originating from livestock.

This study was carried out to determine the basic mycelial culture conditions for Poria cocos growth. According to colony diameter and mycelial density, suitable media for mycelial growth were Malt yeast extract, Potato dextrose agar, Yeast extract agar, and Yeast malt agar. The optimum temperature for mycelial growth was between 25 and 35oC, and the optimum pH value was between 4 and 7. Carbon and nitrogen sources were fructose and yeast extract. The optimum C/N ratio was about 10 to 1 with 2% glucose. Other minor components for optimal growth were thiamine-HCl and nicotinamide as vitamins, acetic and lactic acid as organic acids, and MgSO4·7H2O and FeSO4·7H2O as mineral salts.

This study was conducted to determine the effects of supplementary lighting intensity and duration on selected Cassulaceae species grown in a hydroponic system. Five subfamilies in Crassulaceae with corresponding species were chosen as experimental units namely Sedeveria ‘Letizia ’, Sedum ‘Sun Red’, Crassula rupestris, Echeveria ‘Momotaro’, and Graptoveria opalina. Light duration (3 and 6 hours) and intensity (4,000 lux or 60 μmol • m−2 • s−1 and 8,000 lux or 120 μmol • m−2 • s−1), and their combinations served as factors which were replicated twice. Results revealed that the use of supplementary lighting using LED fixtures had influenced selected species under Crassulaceae. The use of three hours supplementary lighting under low light intensity had statistically similar results with those of the control S. letizia, C. rupestris and G. opalina in particular parameters. Meanwhile, succulents under six-hour with high intensity condition grew well, compared to species S. letizia, C. rupestris and E. ‘Momotaro,’ demonstrating that the data was significantly different. Interestingly, there were no statistical significant differences between species C. rupestris and the control regardless of change of variables (duration and intensity) in all parameters.

A commercial NiO (green nickel oxide, 86 wt% Ni) powder was reduced using a batch-type fluidized-bed reactor in a temperature range of 500 to 600 oC and in a residence time range of 5 to 90 min. The reduction rate increased with increases in temperature; however, agglomeration and sintering (sticking) of Ni particles noticeably took place at high temperatures above 600 oC. An increasing tendency toward sticking was also observed at long residence times. In order to reduce the oxygen content in the powder to a level below 1 % without any sticking problems, which can lead to defluidization, proper temperature and residence time for a stable fluidized-bed operation should be established. In this study, these values were found to be 550 oC and 60 min, respectively. Another important condition is the specific gas consumption rate, i.e. the volume amount (Nm3) of hydrogen gas used to reduce 1 ton of Green NiO ore. The optimum gas consumption rate was found to be 5,000 Nm3/ton-NiO for the complete reduction. The Avrami model was applied to this study; experimental data are most closely fitted with an exponent (m) of 0.6 ± 0.01 and with an overall rate constant (k) in the range of 0.35~0.45, depending on the temperature.

The Korea Microlensing Telescope Network (KMTNet) is a wide-eld photometric system installed by the Korea Astronomy and Space Science Institute (KASI). Here, we present the overall technical specications of the KMTNet observation system, test observation results, data transfer and image processing procedure, and nally, the KMTNet science programs. The system consists of three 1.6 m wide-eld optical telescopes equipped with mosaic CCD cameras of 18k by 18k pixels. Each telescope provides a 2.0 by 2.0 square degree eld of view. We have nished installing all three telescopes and cameras sequentially at the Cerro-Tololo Inter-American Observatory (CTIO) in Chile, the South African Astronomical Observatory (SAAO) in South Africa, and the Siding Spring Observatory (SSO) in Australia. This network of telescopes, which is spread over three dierent continents at a similar latitude of about 􀀀30 degrees, enables 24-hour continuous monitoring of targets observable in the Southern Hemisphere. The test observations showed good image quality that meets the seeing requirement of less than 1.0 arcsec in I-band. All of the observation data are transferred to the KMTNet data center at KASI via the international network communication and are processed with the KMTNet data pipeline. The primary scientic goal of the KMTNet is to discover numerous extrasolar planets toward the Galactic bulge by using the gravitational microlensing technique, especially earth-mass planets in the habitable zone. During the non-bulge season, the system is used for wide-eld photometric survey science on supernovae, asteroids, and external galaxies.

Background: Prone hip extension (PHE) can be performed to measure the lumbopelvic motor patterns and motions. Imbalances in lumbopelvic muscle activity and muscle weakness can result in instability including pain in lumbopelvic region. The posterior oblique sling (POS) muscles contribute to dynamic lumbopelvic stability. In addition, POS are anatomically aligned with the trapezius muscle group according to shoulder positions. Objects: This study compared the electromyography (EMG) activity of POS and pelvic compensations during PHE with and without pre-activation of lower trapezius muscle (lowT). Methods: Sixteen healthy males were recruited. PHE was performed in randomized order: PHE with and without lowT pre-activation. Surface EMG signals were recorded for biceps femoris (BF), gluteus maximus (GM) (ipsilateral), lumbar multifidus (MF) (bilateral), and the lowT (contralateral). An electromagnetic tracking motion analysis was used to measure the angle of pelvic rotation and anterior tilting. Results: The ipsilateral GM and bilateral MF EMG amplitudes were greater during PHE with lowT pre-activation compared to PHE without lowT pre-activation (p<.05). The BF amplitude during PHE without lowT pre-activation was significantly greater than that during PHE with lowT pre-activation (p<.05). The angles of pelvic rotation and anterior tilting during PHE with lowT pre-activation were significantly smaller compared to PHE without lowT pre-activation (p<.05). Conclusion: PHE with lowT pre-activation, which is aligned with the POS, showed more increased MF and GM muscular activity with smaller lumbopelvic compensations in rotation and anterior tilting compared to PHE without lowT pre-activation.

Dynamical analysis of compact groups provides important tests of models of compact group formation and evolution. By compiling 2066 redshifts from FLWO/FAST, from the literature, and from SDSS DR12 in the fields of compact groups in McConnachie et al. (2009), we construct the largest sample of compact groups with complete spectroscopic redshifts in the redshift range 0.01 < z < 0.22. This large redshift sample shows that the interloper fraction in the McConnachie et al. (2009) compact group candidates is  42%. A secure sample of 332 compact groups includes 192 groups with four or more member galaxies and 140 groups with three members. The fraction of early-type galaxies in these compact groups is 62%, higher than for the original Hickson compact groups. The velocity dispersions of early- and late-type galaxies in compact groups change little with groupcentric radius; the radii sampled are less than 100 h−1 kpc, smaller than the radii typically sampled by members of massive clusters of galaxies. The physical properties of our sample compact groups include size, number density, velocity dispersion, and local environment; these properties slightly differ from those derived for the original Hickson compact groups and for the DPOSS II compact groups. Differences result from subtle differences in the way the group candidates were originally selected. The abundance of the compact groups changes little with redshift over the range covered by this sample. The approximate constancy of the abundance for this sample is a potential constraint on the evolution of compact groups on a few Gigayear timescale.

There is much observational evidence that active star formation is taking place in the Hii regions Sh 2-255 – 257. We present a photometric study of this star forming region (SFR) using imaging data obtained in passbands from the optical to the mid-infrared, in order to study the star formation process. A total of 218 members were identified using various selection criteria based on their observational properties. The SFR is reddened by at least E(B −V ) = 0.8 mag, and the reddening law toward the region is normal (RV = 3.1). From the zero-age main sequence fitting method it is confirmed that the SFR is 2.1 ± 0.3 kpc from the Sun. The median age of the identified members is estimated to be about 1.3 Myr from a comparison of the Hertzsprung-Russell diagram (HRD) with stellar evolutionary models. The initial mass function (IMF) is derived from the HRD and the near-infrared (J, J −H) color-magnitude diagram. The slope of the IMF is about 􀀀 = −1.6 ± 0.1, which is slightly steeper than that of the Salpeter/Kroupa IMF. It implies that low-mass star formation is dominant in the SFR. The sum of the masses of all the identified members provides the lower limit of the cluster mass (169M⊙). We also analyzed the spectral energy distribution (SED) of pre-main sequence stars using the SED fitting tool of Robitaille et al., and confirm that there is a significant discrepancy between stellar mass and age obtained from two different methods based on the SED fitting tool and the HRD.

To improve photocatalytic efficiency, graphene/Ag/TiO2 nanotube catalyst was synthesized, and its surface characteristics and photocatalytic activity investigated. For deposition of Ag nanoparticles on the TiO2 nanotubes, a polymer compound containing CH3COOAg/poly(Llactide) was utilized, and the silver particles were precipitated by reducing the silver ions during the annealing process. Graphene deposition on the Ag/TiO2 nanotubes was achieved using an electrophoretic deposition process. Based on the dye degradation results, it was determined that the photocatalytic efficiency was significantly affected by deposition of silver particles and graphene on the TiO2 catalyst. Highly efficient destruction of the dye was obtained with the new graphene/Ag/TiO2 nanotube photocatalyst. This may be attributed to a synergistic effect of the graphene and Ag nanoparticles on the TiO2 nanotubes.

This review presents current progress in the preparation methods of liquid crystalline nanocarbon materials and the liquid crystalline spinning method for producing nano-carbon fibers. In particular, we focus on the fabrication of liquid crystalline carbon nanotubes by spinning from superacids, and the continuous production of macroscopic fiber from liquid crystalline graphene oxide.

Trends of integrating products and services lead to the emergence of Product-Service System (PSS). To implement and embody a PSS solution in new product development, a comprehensive design framework is allowed designers to facilitate the design factors of the PSS in complex business environments. A physical product, containing functionalities for services, is the role of medium between customers and a manufactures. Customers can access those metaphysical interfaces to utilize the product fully or expand its performances. The PSS is aiming to prolong its lifecycle while maintaining its expected quality. Since the quality can be represented as a measure which belongs to user’s perspective, guaranteeing certain level of quality can be interpreted to sustaining customer satisfaction. The objective of this paper is to propose a PSS design framework to identify design factors for developing products and services by integrating object-oriented concepts and blueprinting in context of a business ecosystem. The proposed model is developed based on relationship products and services matching with their design factors. The products and the services are then brought together to form a PSS. Functions and processes can be categorized to identify the design factors in different levels using the object-oriented concepts. Objected-oriented concepts provide PSS analysis tools for describing a business process or a workflow process in the PSS. The blueprint is used to identify the relationships between the products functions and the service processes that are offered as part of a job. To demonstrate of the effectiveness of the proposed model, we use a case study involving a smart phone.

Human error with regards to ship handling is the main cause of maritime accidents. The error happens because of the psychological problem of distraction. Despite the use of modern equipment, standard working procedures and competent crews, still accidents occur because of the physical and psychosocial stresses during the working period on board the ship. This creates undesirable results such as injuries, ill health and even loss of life. The aims of this study are to analyse the possible root causes for distractions and the affected areas for three groups of Malaysian seafarers, 1) Senior Deck Cadets, 2) Senior Deck Officers and 3) Junior Deck Officers. A Technique for Order Performance by Similarity to the Ideal Solution (TOPSIS) method has used for ranking the alternatives in the order of how affected they are. A Malaysian seafarers’, Senior Deck Cadets (SDC) has recorded as the most affected by distractions when they are engaged in the ship’s operation. The outcome of this study will help both seafarers and shipping companies to establish some solutions around this matte.

Menopausal status and hormonal changes are important factors related to the prevalence of metabolic syndrome in women. Nutrient intake is also a risk factor for metabolic syndrome. Although, postmenopausal status and hormonal changes result in a 60% increased risk for metabolic syndrome, there has been no method to elucidate the effects of nutrient intake on metabolic syndrome following menopause. This study was conducted to evaluate the effects of nutrient intake by menopausal women on the prevalence of metabolic syndrome. All data were obtained from the Korean National Health and Nutrition Examination Survey 2007–2009. Menopausal women showed a 1.8-fold increase in the prevalence of metabolic syndrome. Metabolic syndrome group showed significantly lower values in calcium, iron, vitamin A, carotin, retinol and riboflavin intake than those of normal group in premenopausal women. In postmenopausal women, there are significant differences in crude fiber, calcium, iron, potassium, riboflavin and niacin. Indeed, different patterns of nutrient intake were observed by menopausal status and metabolic syndrome. As menopause cannot be controlled, a diet with adequate nutrient intake may be useful to control the rapid increase in the prevalence of metabolic syndrome due to menopause.

We report a rare case of intraosseous epidermoid cyst in mandibular body. A non symptomatic patient without trauma history had a cystic lesion on mandible close to the third molar. The lesion was enucleated while extracting of left lower third molar. The microscopic findings were consistent with an epidermoid cyst. Key words：Epidermoid Cyst, Intraosseous, Mandible

In Brazil, agricultural sector accounts for 15 percent of total employment and agricultural export takes 36 percent of the national merchandise exports. Particularly agricultural export has played an important role in Brazilian economic growth and stabilization. Brazil is a substantial agricultural exporter which obtains huge trade surplus in agricultural trade amounting USD 73,300 million. Major agricultural exports are grain and grain-processed products such as soybean, soybean cake, corn and soybean oil. Particularly soybean is the top exporting commodity in Brazil. Our Study overviews the situation of Brazilian agriculture and analyzes the export competitiveness of Brazilian soybean in the World and Korean markets. We employ several indexes such as price competitiveness, Market Share (MS), Revealed Comparative Advantage Index (RCA), and Comparative Advantage by countries (CAC) to analyze international competitiveness of Brazilian soybean. The main results of our study are as follows : First, U.S. Argentina, Paraguay and Canada are rivals with Brazil in the global soybean market. Second, Brazilian soybean has the 3rd highest price competitiveness following Paraguay and Argentina. Third, Brazilian soybean is second highest following Paraguay in a sense of export competitiveness through RCA and CAC index. Brazilian soybean has competitiveness in respect of comparative advantage not only in Korean market but also in global market. Especially CAC index of Brazilian soybean in the Korean market is higher than those of USA and China which have larger Korean market share than Brazil. However, the competition seems to be even more intensifying because Korea has already agreed on FTA with USA and China, and also Paraguay expands soybean export to Korea recently.

In the last 10 years, porcine somatic cell nuclear transfer to generate transgenic pig has been performed tremendous development with introduction and knockout of many genes. However, efficiency of porcine somatic cell nuclear transfer is still low and embryo transfer (ET) is one of important step for production efficiency. In porcine ET for production of transgenic cloned pig, we can consider many of points to increase production rates. In respect of seasonality and weather, porcine ET usually is not performed in summer and winter. Cloned transgenic embryos must be transferred into reproductive tracts of recipients where embryos are located after natural fertilization with similar estrous cycle. If cloned embryos with 2∼4 cell stage are transferred, they must be transferred into oviducts in periovulatory stage. Number and deposition sites of transferred cloned embryos are important. And we must compare the methods of ET between surgical and non-surgical ones in respect of production efficiency. Sow recipients after natural estrus is most preferred recipients however its cost is must be considered. Here we will review many of current studies about porcine embryo transfer to increase production efficiency of transgenic pigs and strategies for further studies.

The objective of this study was to evaluate the initial detection time and development of the fetal genital structures using ultrasound in twelve pregnant small bitches. The initial detection time of the fetal genital structures was as follows: genital tubercle at days 32.6; os penis at days 45.2; labia at days 45.7; scrotum at days 47.5. Ultrasonograms of fetal genital structure according to gestational stage were as follows: Undifferentiated stage (before day 35), the genital tubercle was observed to have a small elevation and just a hyper-echogenic structure in the midline between the umbilical cord and the tail in male and female fetus. Migration stage (between day 35∼45), the genital tubercle was observed as a hyper-echogenic, bilobular, oval shaped and the genital tubercle began to migrate from the initial position toward the umbilical cord in males, and toward the tail in females. Differentiated stage (after day 46), the penis and os penis were observed to stand out in the abdominal wall and the scrotum was observed toward the perineal region in male fetuses. The labia was detected at the base of the tail in female fetuses. These results indicate that ultrasound of fetal genital structures could be useful for fetal gender determination and a completely prepartum evaluation of the canine fetus.