Elongated CdSe nanoparticles with a diameter of 3-7nm have been successfully synthesized using two surfactants of trioctylphospine (TOP) and hexadecylamine (HDA) at . The formation of elongated CdSe nanoparticles is possibly due to the cooperative effects from both the different binding capability of two surfactants (TOP and HDA) and intrinsically anisotropic crystal structure of the CdSe. The electron diffraction pattern of CdSe nanoparticles revealed the formation of wurzite phase. The CdSe samples showed red-shifted wavelength from 560 to 580nm with increasing the refluxing time due to the gradual growth of CdSe nanoparticles. The relatively broad absorption band can be attributed to the surface state of CdSe nanoparticles. The possible formation mechanism of elongated CdSe nanoparticles was proposed and the characteristics of CdSe have been discussed as well.
The purpose of this study is to develop the jellyfish separator system(JSS) for reducing fishery damage by the increase of jellyfish in the sea area of Korea in summer. First of all, to find the optimum structure of a JSS, six types of JSS in trawl fishery were designed and manufactured, the underwater shape of JSS and the separating process by JSS were observed in the circulating water channel(CWC). And the field experiments were carried out in July and September 2004 in the southern sea of Korea. For the moving path of the jellyfish model in the CWC, in case that the model was larger than the mesh size of the separator net, it was guided toward the lower part of the separator net by the guiding net and discharged through the outlet. In case that the model was smaller than the mesh size of the separator net, some models which passed through the upper part of the guiding net were smaller than the mesh size of the guiding net and discharged through the outlet and most of the model which passed through the lower part of the guiding net moved to the codend passing through the separator net. According to the field experiment result, the optimum tilt angle of separator net was inferred 20˚ that the discharge rate of jellyfish was higher than the other tilt angle of separator net and the optimum structure of JSS was inferred GS type(consists of guiding net and separator net) that the discharge rate of jellyfish was higher than S type(consists of separator net). It was demamded to carry out more study for the countermeasure to reduce loss of fish.
In this study, BaTiO3 thin films were grown by RF-magnetron sputtering, and the effects of a post-annealing process on the structural characteristics of the BaTiO3 thin films were investigated. For the crystallization of the grown thin films, post-annealing was carried out in air at an annealing temperature that varied from 500-1000˚C. XRD results showed that the highest crystal quality was obtained from the samples annealed at 600-700˚C. From the SEM analysis, no crystal grains were observed after annealing at temperatures ranging from 500 to 600˚C; and 80 nm grains were obtained at 700˚C. The surface roughness of the BaTiO3 thin films from AFM measurements and the crystal quality from Raman analysis also showed that the optimum annealing temperature was 700˚C. XPS results demonstrated that the binding energy of each element of the thin-film-type BaTiO3 in this study shifted with the annealing temperature. Additionally, a Ti-rich phenomenon was observed for samples annealed at 1000˚C. Depth-profiling analysis through a GDS (glow discharge spectrometer) showed that a stoichiometric composition could be obtained when the annealing temperature was in the range of 500 to 700˚C. All of the results obtained in this study clearly demonstrate that an annealing temperature of 700˚C results in optimal structural properties of BaTiO3 thin films in terms of their crystal quality, surface roughness, and composition.
본 연구는 오대산국립공원 월정사 일주문에서 금강교 사이에 분포하는 전나무 숲의 식생구조를 파악하기 위하여 진행되었다. 대상지내 흉고직경(DBH) 20cm이상 전나무는 총 977주이었으며, 2006년 조사당시 생육이 불량하거나 고사한 수목은 96주로 전체의 9.8%이었다. 전나무 수령은 41~135년(DBH 11~82cm)이었으며, DBH 100cm이상 대경목은 8주이었고 가장 큰 전나무는 DBH 175cm, 수고 31m이었다. 전나무 밀도는 400m2(20×20m)당 6.1개체이었으며, DBH 20~70cm까지의 개체가 400m2당 5.1개체로 가장 많았다. TWINSPAN을 이용하여 식물군집구조를 분석한 결과 4개의 군집으로 분류되었고 소나무전나무군집은 전나무군집으로 변화가 예상되었으며 나머지 3개 군집은 전나무 군집으로써 피나무, 고로쇠나무 등 낙엽활엽수와의 경쟁이 예상되었다. 오대산국립공원 월정사 주변 전나무 숲은 지속 가능한 문화경관관광자원으로서 가치가 높기 때문에 보전 및 관리를 위해 전체 전나무 중 생육불량 수목과 고사목 발생 원인을 규명하고 대책을 마련해야 할 것이다 또한 전나무 숲 내 아교목층 또는 관목층에 출현하는 피나무, 고로쇠나무 등 낙엽활엽수는 전나무와 지속적으로 경쟁할 가능성이 높으므로 제거 등의 적극적 관리를 해야 하며, 발아 후 초기 생장이 매우 느려 주변 수목에 의한 피압 우려가 있는 전나무 치수는 지속적인 관리가 필요하다.
The structural and electrical properties of amorphous BaSm2Ti4O12 (BSmT) films on a TiN/SiO2/Si substrate deposited using a RF magnetron sputtering method were investigated. The deposition of BSmT films was carried out at 300˚C in a mixed oxygen and argon (O2 : Ar = 1 : 4) atmosphere with a total pressure of 8.0 mTorr. In particular, a 45 nm-thick amorphous BSmT film exhibited a high capacitance density and low dissipation factor of 7.60 fF/μm2 and 1.3%, respectively, with a dielectric constant of 38 at 100 kHz. Its capacitance showed very little change, even in GHz ranges from 1.0 GHz to 6.0 GHz. The quality factor of the BSmT film was as high as 67 at 6 GHz. The leakage current density of the BSmT film was also very low, at approximately 5.11 nA/cm2 at 2 V; its conduction mechanism was explained by the the Poole-Frenkel emission. The quadratic voltage coefficient of capacitance of the BSmT film was approximately 698 ppm/V2, which is higher than the required value (<100 ppm/V2) for RF application. This could be reduced by improving the process condition. The temperature coefficient of capacitance of the film was low at nearly 296 ppm/˚C at 100 kHz. Therefore, amorphous BSmT grown on a TiN substrate is a viable candidate material for a metal-insulator-metal capacitor.
기존의 하중-기반 방법을 대체할 방법중에 성능-기반 방법이 내진설계 및 내진성능평가의 기법으로서 널리 인식되고 있는 실정이다. 탄성응답스펙트럼을 사용하는 역량스펙트럼방법은 비선형 시스템을 등가의 선형시스템으로 치환하여 주어진 지진 하중에 대한 구조물의 최대 비선형 거동을 예측한다. 본 연구의 목적은 철근콘크리트 벽체구조물에 대하여 4개의 등가단자유도방법과 5개의 등가감쇠방법을 사용하여 역량스펙트럼방법의 정확성을 평가하는 것이다. 역량스펙트럼방법의 정확성을 평가하기 위하여 벽체구조물에 대한 진동대 실험결과와 비교하였다. 또한 이선형 곡선변환방법(등가에너지 근사화방법, 유효강성 사화 방법)에 의한 이선형 역량곡선들의 역량스펙트럼 해석에 대한 영향도 비교하였다.
본 연구에서는 하나의 제어장치로 서로 직교하는 2방향의 건물응답을 동시에 제어할 수 있는 동조액체질량감쇠기(Tuned Liquid Mass Damper; TLMD)를 제안하고 제어성능을 실험적으로 검증하였다. 본 연구에서 제안된 TLMD는 한 방향으로는 동조액체기둥감쇠기(Tuned Liquid Column Damper; TLCD) 내부에 채워진 액체의 운동에너지를 이용하여 구조물의 응답을 제어하게 된다. 그리고, 다른 한 방향 즉 TLCD의 직각 방향으로는 LM guide(linear motion guide) 위에 놓인 TLCD 수조와 내부의 액체의 질량을 이용하여 동조질량감쇠기(Tuned Mass Damper; TMD)로 거동하게 함으로써 구조물의 응답을 감소시킨다. 이와 같은 TLMD의 양방향 독립거동 특성을 증명하기 위해 실물크기의 구조물에 설치하여 강제진동실험을 수행하였다. 실험결과, 양방향 모두 대상 구조물의 응답을 감소시키는 것을 확인하여 제안된 TLMD의 효용성을 검증하였다.
본 연구는 일반 철골구조물에서 사용되는 구조용 프리캐스트 콘크리트 외부벽판과 연결부재로 인하여 건물 전체의 내진성능을 조사하였고, 벽판의 높이 변화에 따른 건물 전체의 횡방향 강성 변화량을 파악하였다. 외부벽판과 연결부재를 구조 부재로 간주할 경우 수동형 제진장치와 같이 지진에너지를 소산할 뿐 아니라 추가로 전체 건물의 횡방향 강성을 제공하는 것을 확인하였다. 이력거동 성능을 가진 연결부재를 비선형 유한요소해석 프로그램인 ABAQUS를 이용하여 조사한 결과, 건물의 내진성능 향상에 연결부재가 가장 중요한 역할을 하는 것으로 확인되었다.
쉘형 구조물은 외력에 대해 효과적으로 저항할 수 있어, 두께를 얇게하면서 대공간 구조물을 만들 수 있는 장점이 있다. 이러한 장점은 구조형태에 크게 의존한다. 그러므로 많은 설계자들은 최적 형태를 설계에 반영하고자 하지만, 이는 간단치 않다. 지금까지 보다 최적의 형태를 얻기 위한 많은 기법들이 발표되어 왔고, 이들은 각각 장단점을 나타낸다. 본 논문에서는 최적의 곡면을 얻기 위해 기하학적 비선형을 고려한 유한요소법을 이용한 비교적 간단한 방법을 제안한다. 이러한 방법을 이용하여 다양한 쉘형 곡면에 적용하여 최적곡면을 얻고, 이를 비교한다.
북한산 국립공원지역의 식생구조를 파악하고자, 북한산성에서 인수봉에 이르는 지역에 16개의 방형구(2500m2)를 설정하여 식생을 조사하였다. 식물군집을 분류한 결과 16개 조사구는 신갈나무 혼효림 군집, 소나무신갈나무 군집, 신갈나무 우점군집의 3개 군집으로 분류되었다. 북한산 국립공원내 북한산성에서 인수봉에 이르는 지역의 우점수종은 신갈나무로 나타났다. 수종간의 상관관계는 신갈나무와 진달래, 신갈나무와 개옻나무, 진달래와 철쭉, 노린재나무와 철쭉, 당단풍과 함박꽃나무 등의 수종들 간에는 높은 정의상관이 인정 되었고, 물푸레나무와 진달래, 노간주나무와 당단풍, 쪽동백나무와 당단풍 등의 수종들간에 부의 상관이 비교적 높은 편이다. 조사지의 군집별 종 다양성도는 1.236~1.319의 범위로 다른 국립공원들의 능선부 식생에 비하여 비교적 높게 나타났다.
지진에 의한 구조물의 응답을 저감시키기 위하여 내진, 면진, 제진 등 다양한 장치가 사용되고 있으며 그 중에서 면진장치는 구조물로 전달되는 지진에너지를 최소화하기 위한 시스템으로 그 주된 목적은 구조물의 주기를 길게 만들어 지진파의 탁월주기를 벗어나게 하는 것이다. 본 연구에서는 대공간구조물의 기본적인 동적특성을 가지고 있으며 동시에 가장 간단한 구조이기도 한 아치에 납-고무면진장치와 마찰진자면진장치를 적용하여 지진거동을 분석하였다. 대공간구조물의 지진거동은 일반적인 골조구조물의 지진거동과 달리 수평지진에 의하여 수직방향으로 큰 지진응답이 나타나고 있다. 면진장치를 대공간 구조물에 적용할 경우에 수평지진하중에 의하여 수평방향 지진응답이 저감되는 것은 물론 면진장치의 수직강성으로 인하여 수직응답도 현저하게 저감되는 것을 알 수 있었다.
교량, 항만 및 각종 구조물과 산업설비에 대한 설계는 주로 결정론적 해석방법(Deterministic Analysis)에 의해 수행되고 있다. 그러나 구조물에 내재된 확률변수의 불확실성에 대한 영향을 보다 명확하게 평가할 뿐만 아니라 경제적인 설계를 위해서는 보다 개선된 평가방안이 요구된다. 이 연구에서는 터빈발전기 기초를 대상으로 합리적인 설계를 위해 확률유한요소법을 이용한 구조신뢰성해석을 수행하였다. 이를 위해 확률유한요소법을 신뢰성이론에 적합하도록 정식화하였으며, 대상 구조물의 부재강성 및 지진하중 등을 확률변수로 고려하여 동적응답해석 및 구조신뢰성해석을 효율적으로 수행할 수 있는 개선된 해석프로그램을 작성하였다. 작성된 해석프로그램을 이용하여 주요부재의 변위 및 부재력 응답에 대한 분산특성을 검토하였다. 아울러, 구조신뢰성해석에 따른 신뢰성지수 및 파괴확률을 제시함으로써, 대상 구조물의 구조 안전성을 정량적으로 평가하였다. 이 연구결과는 향후, 터빈발전기 기초의 개선된 설계방안을 설정함에 있어 기초자료를 제공할 것으로 기대된다.
이 논문에서는 구조물의 내진성능 향상을 위한 방법으로서 구조부재 및 수동형 감쇠기의 통합최적설계기법을 제시한다. 이는 구조부재 및 감쇠기의 최적배치를 다루는 최적화기법이다. 통합시스템의 최적설계를 위하여 다목적최적화기법을 도입하고, 이를 보다 효율적으로 다루기 위하여 목표신뢰성 제한조건을 갖는 다목적최적화문제로 재구성하였다. 수치해석 예제를 통하여 다양한Pareto 최적해를 제시하였으며, 이들이 기존 설계방법에 상응하는 순차적 설계방법 및 가중합방법에 따른 단일목적함수 최적화방법을 포괄함을 검증하였다. 여러 Pareto 최적해로부터 강성 및 감쇠장치의 사용량을 달리하는 3가지 대표설계안을 선택하고 이들의 내진성능을 다양한 지진하중에 대하여 비교 분석하였다. 이로부터 제시하는 방법이 구조물의 내진성능 향상을 위한 설계방법으로서 효율적으로 적용될 수 있을 것으로 기대된다.