본 시험은 점착물질을 이용하여 솔잎혹파리 우화성충의 밀도를 감소시키기 위해 지면산포, 지피식생 및 수간산포의 세 방법으로 이 시험을 위해 조제한 점착제 를 이용하여 경기도 안양시 산본리에서 시기별로 시험한 결과는 다음과 같다. 1. 점착제로 선정된 의 조성은 피마자유 , Damar 수지 , Carnauba Wax 였으며 점성, 점도의 지속성이 우수하였고, 약해가 비교적 낮았다. 2. 지면산포구에서 우화최성기의 성충포획수는 대조구에 비해 G-II구는 가 감소 되었다. 3. 지피식생산포구에서는 우화최성기의 성충포획 수는 대조구에 비하여 P-I구는 , P-II구는 약 가 감소되었다. 4. 수간산포구에서는 충영형성율이 F-I구가 F-II구는 , F-II구는 로 처리시기가 빠를수록 충영형성율이 낮았으나 F-I구는 F-II구간에는 유의차가 없었으며 소나무의 상중하부위별 충영형성율은 유의차가 없었다. 5. 점착제의 산포시기는 전처리구에서 우화최성일 1주일전이 효과적이었다.

본 실험은 Hempa 처리가 쌀바구미 (Sitophilus oryzae L.)에 미치는 생물학적 영향과 부분불임성의 유전성에 미치는 영향을 조사하기 위하여 우화후 1-3일된 숫컷을 및 의 Hempa로 처리된 소맥에서 2일간 섭식처리하여 당대의 치사율, 수명 및 산란수에 미치는 영향을 조사하고 세대에 미치는 처리효과를 조사하여 다음과 같은 결과를 얻었다. (1) 처리웅충의 평균수명은 대조구에 비하여 차가 없었으며 당대 치사율도 처리시 보정 치사율은 로 유의차가 없었다. (2) 처리웅충과 교배된 정상 자충의 3일간 평균 산란수는 무처리구 3.60에 비하며 구에서 각각 3.78, 4.05, 3.75 및 3.61개로 유의차가 없었으며 비교배자충 구에서는 1.91로 현저한 산란수의 감소를 보였다. (3) 처리웅충과 무처리자충의 교배에서 얻은 대의 처리후 27일간 총평균 부화율은 대조구 에 대하여 구에서 각각 로 처리농도의 증가에 따라 부화율이 감소되었다. (4) 처리후 산란 시기별로 산하된 란의 부화율은 모든 처리구에서 처리후 10-12일까지는 부화율이 감소하다가 그후 다시 증가하는 회복현상을 보였다. (5) 고농도 처리구인 구에서는 처리후 1-3일에 산하된 란의 부화율이 낮았고 10-12일 이후에도 회복의 속도가 느렸다. 이와같은 현상은 배우자 형성 과정에서 영향을 받는 시기의 범위가 넓기 때문이라고 생각되었다. (6) 유충기 치사율은 대조구 에 비하여 구에서 각각 로 처리농도의 증가에 따라 치사율의 증가를 보였다. (7) 난기 치사율과 유충기 치사율의 관계는 처리구에서 상관계수가 각각 r=+0.89, +0.83 및 +0.85로 난기 치사와 유충기 치사는 동일형의 영향임을 알 수 있었다. (8) 치사인자 발현에 대한 난기와 유충기의 감수성은 각각 및 초 난기가 유충기보다 감수성이 쳤다. 또한 미우화에 미치는 영향은 이들 둘의 공동작용의 결과임으로 로 더욱 감수성이 컸다. (9) 대의 우화 성충은 처리구에서 암컷대 숫컷의 비율이 100 : 125, 100 : 108 및 100 : 124로 숫컷의 출현빈도가 높은 듯 하였으나 우화 개체수가 적은 관계로 통계적인 유의성은 없었다. (10) 이 처리후 16-18일에 산하한 난에서 우화한 웅충을 무처리 자충과 교배하였을 때 구에서는 구에서는 의 난기 치사율을 나타내었고 도 각각 와 의 치사율을 나타내고 있어 염색체 이상의 결과라고 생각되었다. (11) 세대의 유충기 치사율은 자충 퇴교배구가 웅충 퇴교배구 보다 높았고 형매교배에서 가장 높았다. (12) 및 세대의 유충발육은 산난후 제17일에 1-2영충이 대조구 에 비해 자충 퇴교배구, 웅충 퇴교배구 및 구에서 각각 및 로 분화의 지연작용을 나타내는 듯하였다. (13) 세대에서도 난기 및 유충기 치사율이 형매교배구가 퇴교배구 보다 높았다. 이는 열성치사인자가 영향한 때문이라고 생각한다. (14) Hempa 처리에 의하여 유기된 불임은 주로 전좌나 결실과 같은 염색체 이상로 유기되는 우성치사돌연변이에 기인된 것이라고 생각되었으며 이들 인자의 영향은 처리 후 제3세대에까지 전달됨을 알 수 있었다.

A zeolite material (ZCH) was synthesized from coal fly ash in an HD thermal power plant using a fusion/hydrothermal method. ZCH with high crystallinity could be synthesized at the NaOH/CFA ratio of 0.9. Ion-exchanged ZCH adsorbents for ammonia removal were prepared by ion-exchanging various cation (Cu2+, Co2+, Fe3+, and Mn2+) on the ZCH. They were used to evaluate the ammonia adsorption breakthrough curves and adsorption capacities. The ammonia adsorption capacities of the ZCH and ion-exchanged ZCHs were high in the order of Mn-ZCH > Cu-ZCH ≅ Co-ZCH > Fe-ZCH > ZCH according to NH3-TPD measurements. Mn-ZCH ion-exchanged with Mn has more Brønsted acid sites than other adsorbents. The ion-exchanged Cu2+, Co2+, Fe3+, or Mn2+ ions uniformly distributed on the surface or in the pores of the ZCH, and the number of acidic sites increased on the alumina sites to form the crystal structure of zeolite material. Therefore, when the ion-exchanged ZCH was used, the adsorption capacity for ammonia gas increased.

This mini-review focused on the current advances in the development and the application of the antibacterial agents produced from probiotics strains against foodborne pathogens. Inhibitory activity of the pathogen growth could be achieved by co-culture with probiotics and/or the treatment of metabolites extracted from probiotics culture, whereas strain-dependent efficacy was mainly reported according to the bacterial species of the target pathogens. To overcome the limited antibacterial spectrum and the efficacy of the metabolites from probiotics, the recent research highlight the discovery of novel bioactive substances with broad range of the inhibitory activity of foodborne pathogens and mode-of-action which has not been reported as the major research goal. Moreover, understanding the distribution of functional and regulation genes coding the production of the antibacterial metabolites based on the bacterial genome analysis can provide the clues for the mechanisms of the pathogen control by using probiotics. Major strategies on the application of the genomics in this research area can be represented as follows: 1) functional annotation specialized for antimicrobial proteins, 2) assessment of the antibacterial effects followed by the general/functional annotation, 3) genome and metabolites analysis for the purification of antimicrobial proteins, 4) comparative genomics and the characterization of antimicrobial potential. Especially the relationship between phenotype-genotype based on genomic bioinformation with the results of the practical efficacy tests of bacterial metabolites as an active substance of disinfectants and/or preservatives can be expected to act as supportive research for broadening our knowledge regarding the key metabolic pathways associated with the production of antibacterials from probiotics.

Electrical Conductivity (EC) or Total Dissolved Solids (TDS) has been often used to evaluate the water quality in some water education program for children and youth. This study attempted to find out whether EC (or TDS) can be used as a water pollution criteria in water education program. To clarify it, we used the water analysis data of July 2019 and January 2020 from Water Environment Information System. Data from 332 points in Han-river were used to investigate correlation between the parameters, such as BOD, COD, TN, TP vs EC. Correlation(r) for all data of BOD vs. EC was 0.347 for July 2019 and 0.483 for January 2020. No correlation was observed for BOD Ia and BOD Ib for July 2019 (r=-0.041, -0.030, respectively) and BOD Ia for January 2020 (r=0.041). Better correlation for all data of COD vs. EC was obtained (r=0.543 for July 2019 and r=0.610 for January 2020). However, no correlation was observed for COD Ia for January 2020. High vlaue of EC or TDS does not always mean water pollution, especially for clean water environment. Thus, EC (or TDS) alone can not be used as a water pollution criteria.

Zeolitic material, Z-Y3, was synthesized from coal fly ash (CFA) under low-alkaline conditions (NaOH/CFA ratio = 0.3 and NaOH solution concentrations of 0.0, 0.5, and 1.0 M) using a fusion/hydrothermal method. The adsorption capacities of the fabricated Z-Y3 samples for Cs and Sr ions and the desorption capacity of Na ions were evaluated. The XRD patterns of the Z-Y3 sample fabricated using a 1.0 M NaOH solution (Z-Y3 (1.0 M)) indicated the successful synthesis of a zeolitic material, because the diffraction peaks of Z-Y3 coincided with those of the Na-A zeolite in the 2θ range of 7.18-34.18. Moreover, the SEM images revealed that morphology of the Z-Y3 (1.0 M) sample, which presented zeolitic materials characteristics, consisted of sharp-edged cubes. The adsorption isotherms of Cs and Sr ions on all the fabricated Z-Y3 samples were described using the Langmuir model, and the maximum adsorption capacities of Cs and Sr were calculated to be 0.14-0.94 mmol/g and 0.19-0.78 mmol/g, respectively. The desorption of Na ions from the Cs and Sr ions adsorbed Z-Y3 samples followed the Langmuir desorption model. The maximum desorption capacities of Na ions from the Cs and Sr ions adsorbed Z-Y3 (1.0 M) samples were 1.28 and 1.49 mmol/g, respectively.

Environmental contamination by organic compounds are not only restricted to water, but extends to soil and groundwater as well. However, highly oxidized compounds, such as halogenated organics and nitro-compounds, can be detoxified employing reducing methods. Permeable reactive barrier is one of the representative technologies where zero-valent metals (ZVMs) are employed for groundwater remediation. However, organics contaminates often contaminate the unsaturated zone above the groundwater. Despite the availability of technologies like soil vapor extraction and bioremediation, removing organic compounds from this zone represents several challenges. In this study, the reduction of nitrobenzene to aniline was achieved using zero-valent iron (ZVI) under unsaturated conditions. Results indicated that the water content was an important variable in this reaction. Under dry conditions (water content = 0.2%), the reduction reaction was inhibited; however, when the water content was between 10% and 25% (saturated condition), ZVI can reduce nitrobenzene. Palladized iron (Pd/Fe) can be used to reduce nitrobenzene when the water content is between 2.5% and 10%. The reaction was evaluated over a wide range of temperatures (10 – 40 °C), and the results indicated that increasing the temperature resulted in increased reaction rates under unsaturated conditions.

설령 엘리엇 자신도 네 사중주를 자신의 최고의 걸작으로 간주했지 만 실제 우리가 이 작품을 정확하게 감상하기란 결코 쉽지 않다. 이 작 품만이 지닌 철학적․종교적 사상이 그 난해함을 가중시키고 있다. 그 래서 본 글은 네 사중주를 통하여 우리 인간의 영혼계에 초점을 맞추 었다. 즉, 우리 인간의 영혼의 이동 모습을 고찰해 본 것이다. 우리 인 간의 영혼은 물리적/ 물질적 세계에서 영적/비가시적 세계로의 이동이 가능하다. 그것을 위한 최우선 조건이 바로 자기를 부정하는 것이며 아 울러 예수 그리스도의 성육화와 사랑 등이 그 중심을 차지하고 있다.

In this study, zeolitic materials were synthesized from Jeju Volcanic Rocks (JVR) using a fusion/hydrothermal method at NaOH/JVR ratios of 0.6 and 1.2. The crystallinities of the zeolitic materials at NaOH/JVR ratios of 0.6 and 1.2 were 25.5% and 59.0%, respectively. It was confirmed through the SEM image that the zeolitic materials covered the zeolite particle with a cube-shaped crystals. The Co ions adsorption by the zeolitic materials were to reach the adsorption equilibrium at 120 min. It could be better simulated in the pseudo-second order adsorption kinetic equation than in the pseudo-first order adsorption kinetic equation. The adsorption capacities (qm) of Co ions could be to estimate Langmuir isotherm better than Freundlich isotherm. The maximum adsorption capacities (qm) at NaOH/JVR ratios of 0.6 and 1.2 were 55.3 mg/g and 68.7 mg/g, respectively. It was found that there was a high correlation between the crystallinity of zeolitic materials and the adsorption capacity of Co ions adsorption.

The characteristics of ammonia-nitrogen (NH4 +-N) adsorption by a zeolitic material synthesized from Jeju scoria using the fusion and hydrothermal method was studied. The synthetic zeolitic material (Z-SA) was identified as a Na-A zeolite by X-ray diffraction, X-ray fluorescence analysis and scanning electron microscopy images. The adsorption of NH4 +-N using Jeju scoria and different types of zeolite such as the Z-SA, natural zeolite, and commercial pure zeolite (Na-A zeolite, Z-CS) was compared. The equilibrium of NH4 +-N adsorption was reached within 30 min for Z-SA and Z-CS, and after 60 min for Jeju scoria and natural zeolite. The adsorption capacity of NH4 +-N increased with approaching to neutral when pH was in the range of 3-7, but decreased above 7. The removal efficiency of NH4 +-N increased with increasing Z-SA dosage, however, its adsorption capacity decreased. For initial NH4 +-N concentrations of 10-200 mg/L at pH 7, the adsorption rate of NH4 +-N was well described by the pseudo second-order kinetic model than the pseudo first-order kinetic model. The adsorption isotherm was well fitted by the Langmuir model. The maximum uptake of NH4 +-N obtained from the Langmuir model decreased in the order of Z-CS (46.8 mg/g) > Z-SA (31.3 mg/g) > natural zeolite (5.6 mg/g) > Jeju scoria (0.2 mg/g).

This work was performed to develop a dip injection wet scrubber (DIWS) system with chlorine dioxide as the oxidant. The exhaust pollutants from a lime kiln of paper-mill were introduced to the system. When NaClO3 was used to oxidize NO into NO2, the oxidation was unsatisfactory and the combination of HNO3 or H2SO4 was required for 100% oxidation. ClO2 is recommended to oxidize NO and SO2 effectively. With the combination of 1st stage of DIWS and ClO2, 57.1% of NOx and 98% of SO2 were effectively removed. In the case of 2nd stage of DIWS and ClO2, 93.5% of NOx and 99% of SO2 were removed. The ClO2+DIWS process was superior to the ClO2+Scrubber process in terms of investment, running cost and NOx removal efficiency.