This study aims to provide a real-time information to the driver by effectively operating the advanced safety device attached to the freight vehicle, thereby minimizing insecure behavior of the driver such as speeding, rapid acceleration, sudden braking, And improve driving habits to prevent accidents and save energy. Advanced safety equipment is a device that warns the driver that the vehicle leaves the driving lane regardless of the intention of the driver and reduces the risk of traffic accidents by mitigating or avoiding collision by detecting a frontal collision during driving.The main contents of this report are as follows: In case of installing a warning device on a lane departing vehicle (excluding a light vehicle) and a lorry or special vehicle with a total weight exceeding 3.5 tonnes, the driver must continue to operate unless the driver releases the function.In addition, when the automatic emergency braking system is installed, the structure should be such that the braking device is operated automatically after warning the driver when the risk of collision with the running or stopped vehicle in the same direction is detected in front of the driving lane.

Purpose: The purpose of this study was to describe the nursing unit manager's experience with patient safety accidents. Methods: Data were collected from April, 2017 to December, 2017 through in-depth interviews with seven unit managers who worked in General wards, OPD or in the ICU of a general hospital. Qualitative content analysis method was used to analyze the data. Results: The following four categories were elicited; dimensions are different from each other, complex feelings about the person after the accident, ambivalence for the accident triggers, leadership learned from accident management. Conclusion: The findings provided valuable informations on the nursing unit managers' experience with patient safety accidents, which held many nursing implications. Based on the findings, it is possible to develop accident management guidelines and the support system for accident management personnels.

세계는 지금 디지털의 연결성과 고도화된 ICT 기술을 기반으로 한 ‘제4차 산업혁명’ 시대로 접어들고 있다. 국내 식품산업도 ICT, AI, 빅데이터, 등 4차산업 관련 요소기술들의 여러가지 분야에 접목시키고 있다. 불량식품은 식품의약품안전처에서 식품의 생산, 제조, 유통, 판매 등전 단계에서 발생할 수 있는 모든 법을 위반한 제품으로 넓게 정의하고 있으나 주로 경제적 이익을 취하기 위해 의도적으로 원료나 원산지를 바꾸거나 부정물질을 첨가한 위변조식품을 말한다. 식품 공급망이 세계화되고 복잡해짐에 따라 위변조 수법이 점점 정교해지고 급증하고 있어 사후 단속하는 방법으로 불량식품 발생에 대응하기에는 한계가 있다. 따라서 불량식품을 사전에 차단할 수 있는 과학적 체계를 마련하기 위하여 소셜빅데이터 분석기술 등을 위변조인자의 안전관리에 적용하고 있는 동향을 소개하고자 한다.

This study aims to provide a real-time information to the driver by effectively operating the advanced safety device attached to the freight vehicle, thereby minimizing insecure behavior of the driver such as speeding, rapid acceleration, sudden braking, And improve driving habits to prevent accidents and save energy. Advanced safety equipment is a device that warns the driver that the vehicle leaves the driving lane regardless of the intention of the driver and reduces the risk of traffic accidents by mitigating or avoiding collision by detecting a frontal collision during driving.The main contents of this report are as follows: In case of installing a warning device on a lane departing vehicle (excluding a light vehicle) and a lorry or special vehicle with a total weight exceeding 3.5 tonnes, the driver must continue to operate unless the driver releases the function.In addition, when the automatic emergency braking system is installed, the structure should be such that the braking device is operated automatically after warning the driver when the risk of collision with the running or stopped vehicle in the same direction is detected in front of the driving lane.

정부와 안전보건공단에서는 건설현장의 안전사고를 줄이기 위하여 감독․점검, 기술지도, 재정지원 등의 산업재해예방 활동을 지속적으로 수행하여 왔다. 하지만, 전체 산업의 사고사망만인율과 재해율이 전반적으로 감소 추세에 있는 반면에, 건설업의 사고사망만인율 및 재해율은 2014년 이후 오히려 증가 추세에 있다. 특히, 2016년 재해통계를 기준으로 전체 건설업 재해자의 약 70%가 공사금액 20억 미만의 소규모 건설현장에서 발생하였다. 이러한 소규모 건설현장의 재해를 줄이기 위해서는 현재의 산업안전보건법 상의 소규모 건설현장 산업안전보건관리체제와 고용노동부 및 안전보건공단에서 수행하고 있는 소규모 건설현장재해예방 사업에 대한 실효성을 파악하고 개선할 필요가 있다. 현 산업안전보건관리체제에서는 건축공사 기준으로 120억 이상인 공사인 경우 안전관리자를 의무 선임하도록 되어 있으며 3억에서 120억 미만 공사의 경우 재해예방지도기관의 기술지도를 받도록 되어 있다. 또한, 안전보건공단에서는 민간위탁기관을 지정하여 3억 미만 건설공사의 안전관리를 지원하고 있으며, 클린사업장 조성지원사업을 통해 20억 미만 소규모 건설현장의 추락재해예방을 위해 시스템 비계, 사다리형 작업발판 및 안전방망 등의 설치 비용을 지원하고 있다. 본 연구에서는 공사금액별 재해통계 및 안전관리자 선임관련 제도를 분석하여 안전관리자 선임 대상을 현행 건축공사 120억 이상인 공사에서 단계적으로 50억까지 확대할 것을 제안한다. 설문조사와 전문가 의견을 수렴하여 재해예방지도기관의 기술지도 영역을 조정하고 실효성을 강화하기 위한 방안을 수립하고, 클린사업장 조성지원사업의 사업 확대 요구 및 개선사항을 도출한다.

Industrial disasters cause lots of damages from individuals to companies and country. Especially, damages caused by constructional disasters take very large portion in the whole industry and are accompanied by huge personal·physical damages. For the prevention of disasters, roles of safety manager are very important and especially, effects of disaster prevention can be changed by occupational ability of construction safety manager. To improve job abilities of safety manager, job education is very important. This research suggested a model for job education management of construction safety manager and proposed improvements as a study on improvement of curriculum for vitalization of job education of construction safety manager so as to improve occupational ability of safety manager. To achieve them, this research examined standard and operation status of current job education of safety manager and the problems and suggested a model materializing job educational contents as a measure to vitalize job education system of safety manager.

Safety accidents, which are called industrial accidents in construction work, are often caused by unstable physical and personal conditions combined during preparation and execution of work. It is difficult to manage all the construction works, but especially in the field of apartment construction work, complex and many kinds of works are being carried out at the same time. In the current construction, safety regulations such as safety management guidelines are generally well maintained, but the execution of manpower resources that can fulfill them is limited, and it is difficult to reduce the accident rate and loss cost. Therefore, in this study, it is a reality that most of the types of construction work are under contruction by subcontracting contract, so they are limit by methods of manual maintenance and safety education. Currently, the subcontractor is also allowed to perform safety management through the composition of the safety management review body, but it is operated formally. So alternatives to this were studied. As a result, safety accidents occur in the subcontractor's worker due to vertical integration, which is characteristic of the construction industry, together to the contractor, the safety management system is based on a safety construction system in which a worker who has a certain qualification condition such as career experience of the work type, work understanding of the work type, and management experience of the work type among the subcontractor, when we manage based on mutual personality which is the personality of interpersonal relationship that can communicate with each other by work type, process and grouping, it is concluded that effective and practical safety management can be achieved to reduce the accident rate and loss cost.

This study analyzed the condition of marine accident and disaster rate of crew of Korean fishing vessels by vessel type, and checked the Australian safety management system and relevant regulation in Korea to suggest measures to build coastal/offshore fishing vessel safety management system in Korean coastal/offshore fishery. As a result, the power and production amount of Korean coastal/offshore fishing vessel is consistently decreasing while marine accident is increasing. Disaster rate of crew was higher than land industry, especially, the disaster rate of coastal/offshore fishing vessel was very high (100.0‰). Australia applies safety management system differed by vessel type and operation waters which fully considers the characteristics of pertinent vessel. The average accident rate of fishing vessels with gross tonnage over 20 tons among the Korean coastal/offshore fishing vessel was 13.6%, which was significantly higher than fishing vessels with gross tonnage below 20 tons (1.4%). Such result indicates it is urgent to implement safety management system to fishing vessel with gross tonnage over 20 tons and introduce fishing vessel safety supervisor. Establishing safety management system of coastal/offshore fishing vessel will contribute to consistent industrial development by achieving the general goal of reducing marine accident and spreading safety culture.

세월호 사고 이후 내항선 안전관리분야에서의 가장 큰 변화는 해사안전감독관 제도의 도입이라 할 수 있다. 이 제도의 도입으로 내항여객선의 안전관리는 운항관리자와 해양경찰로부터 운항관리자와 새로이 도입된 해사안전감독관으로 변경되었다. 또한 내항화물선의 안전관리도 선박검사관으로부터 해사안전감독관과 선박검사관에 의한 안전관리의 체계로 전환되었다. 그러나 새로이 도입된 이 제도는 전문임기제에 따른 감독관의 신분상의 불안으로 인한 업무연속성 부족, 감독대상의 현실을 무시한 감독관의 자격요건 설정, 내항화물선에 대한 심사와 지도·감독기관의 분리로 인한 업무혼선 및 감항성 확보를 위한 항행정지 개선명령 분야의 한계 등에 대한 문제점이 여전히 남아 있다. 내항선의 안전관리를 보다 강화하기 위해서는 내항선 안전관리 업무를 실질적으로 수행하고 있는 해사안전 감독관 제도의 정착이 필수적이라 아니할 수 없다. 따라서 이러한 문제점을 개선하기 위해서는, 내항화물선에 대해서 통합된 단일기관에 의한 체계적인 안전관리가 이루어져야 하며, 전문임기제인 감독관의 신분상의 제약에 대한 개선이 동시에 이루어져야 한다. 또한 항행정지 개선명령의 분야를 확대하고, 선장·기관장 및 국제선급의 검사원 경험자 위주로 감독관의 자격을 강화해서 보다 체계적이고 실질적인 내항선의 안전관리가 되도록 해야 할 것이다.

미국 정부는 2011년 식품안전현대화법(FSMA, Food Safety Modernization Act)을 제정하였으며 단계적으로 실시 및 실시예정에 있다. 이중 농산물안전(Produce Safety) 최종규칙은 농산물 재배, 수확, 포장 및 보관과 관련된 생물학적 위해요소에 초점을 맞추고 있는데, 영농규모 등에 따라 2017년 1월부터 단계적으로 시행되고 있다. FSMA 의 농산물안전 규칙 중 현장에서 준수해야 하는 조항을 55개 선별하여 한국 GAP기준과 비교한 결과, 비교 대상 인 두 개의 기준이 조항별 관리사항에 대해 1:1로 단순비교하기에는 어려운 점이 있으나 상당수의 한국 GAP기준이 대응이 가능하다. 다만 한국 GAP기준은 포괄적 기준으로 평가자에 따라 다른 판단을 할 여지가 많으므로 기준의 세부 사항의 보강이 필요하다. 조항별로 보면, 작업자 안전위생(FSMA Subpart D)에 대하여 한국 GAP기준은 가장 높게 대응이 되며, 그 다음으로는 가축 및 야생 동물(FSMA Subpart I), 건물·장비·도구(FSMA Subpart L), 재배·수확 등의 활동(FSMA Subpart K) 순으로 대응이 되고 있다. 그러나, 농업용수 관리(FSMA Subpart E)와 관리자의 자격 및 교육(FSMA Subpart C)에 대해서는 다소 미 흡한 실정이며, 가축분뇨기반 퇴비 관리(FSMA Subpart F) 에 대해서는 대응이 취약한 편이다. FSMA 규칙은 인증 기준은 아니나, 세계적으로 식품안전의 표준을 선도하는 미국이 제시한 규칙인 만큼 파급력이 상당할 것으로 예상 된다. 따라서 국내 농산물 기준 중 FSMA 규칙에서 강조 하는 미생물적 안전성에 대응하는 기준이 GAP기준이므로 한국 GAP기준의 재검토를 통해 우리 농산물의 품질 향상 및 수출확대에 도움이 되기를 바란다.

The purpose of this study was to assess the correlation between attitude of Patient Safety Management(PSM) and practice of PSM and clinical practice satisfaction of nursing students, also identified how these factors attitude and practice of PSM influence on clinical practice satisfaction, eventually aimed to develop education programs to strengthen practice of PSM in nursing students. A descriptive design was used in the study. The multiple regression was used for the study to prove the factors how the attitude and practice of PSM were affected to the clinical practice satisfaction. The study subjects were 226 nursing students. The results show that attitude of PSM mean was 3.71, practice of PSM mean 3.97, the clinical practice satisfaction mean 3.31. Among the general characteristics, clinical practice satisfaction showed significant differences in satisfaction of major(F=5.10, p=.001), the existence of role model(t=2.64, p=.009). Significant positive correlation was found between attitude of PSM, practice of PSM and the clinical practice satisfaction. Practice of PSM(β=.39) was shown as the most important factor to affect on the Satisfaction on clinical practice, also the explanation power of value for this study was found 41.1%. Consequently, this study indicates to develop the education program to strengthen practice of PSM. Also process the additional study for the nursing students in other areas.

The purpose of this study is to provide basic data to help ensure the safety and enhance industrial competitiveness of plant construction projects by analyzing the safety management status of, mainly, chemical engineering plant construction projects, and proposing specific measures and models to reduce human/educational, technical/systemic, institutional disasters. This study was done using literature research and case study/empirical study methods. The results of this study are summarized as follows. First, we classified the major disasters from the quarterly released ‘major diaster cases in construction business’from Korea Occupational Safety and Health Agency according to the type of construction and presented the causes and prevention measures.

As industrialization progresses, mass production becomes a smart production system. However, industrial accidents do not decline, and during the course of industrialization, due to the logic of economic agents that have an economical and effective employment environment, they are changed to non-regular workers. The Occupational Safety and Health Act stipulates that the safety managers must be distinguished and the safety managers perform the task of conducting industrial accidents by balancing the duties and regulations specified in the Act on Special Measures for Deregulation. Safety administrators providing advice on issues needed to prevent industrial accidents and preventive measures We would like to present the problems and improvements that may arise due to safety managers ' replacement due to accidents caused by industrial accidents or accidents.