This study investigated the species composition and bycatch status of fishes by fyke net between June and November 2020 in Asanho lake and Chungjuho lake. During the survey period, the catches in Asanho lake were identified as 2,931 individuals of 16 species from a total of six families and in Chungjuho lake were identified as 1,645 individuals of 14 species from a total of eight families. The dominant species in Asanho lake was Erythroculter erythropterus which accounted for 59.6% of the the total number of individuals and 40.5% of the total biomass caught. The dominant species in Chungjuho lake was Lepomis macrochirus which accounted for 48.2% of the the total number of individuals and Erythroculter erythropterus which accounted for 60.2% of the total biomass caught. The bycatch rates of non-commercial species in Asanho lake and Chungjuho lake were 77.0% and 82.6%, respectively. As a result of analyzing the frequency distribution of the total length of Carassius auratus and Siniperca scherzeri, which were the dominant species among commercial species, the bycatch rate of small individuals was 87.1%, and 42.7%, respectively.

This study quantitatively evaluated size selectivity for three netting shapes (T0; regular, T45, T90) and hanging ratio (35%, 70%) of T0 netting used for trawl codend. The size selectivity experiment was performed in a tank using a cube experimental model with a length of 50 cm on one side and 389 experimental individuals, jack mackerel (Trachurus japonicus). In the selectivity analysis, a selectivity curve was created based on the selection ratio using a logistic function, and the 25%, 50%, and 70% selection length and selection range  were obtained. The T0 netting was 19.54 cm when the 50% selective length, which is a selectivity evaluation index, had a hanging ratio of 35%, a selection range of 0.51 cm, and 22.70 cm and 3.08 cm for the hanging ratio of 70%. The T45 netting was 24.34 cm and 2.13 cm, and the T90 netting was 23.51 cm and 2.84 cm. The results of the T45 netting and the T90 netting are similar, and the 50% selection length and selection range were relatively larger than the T0 netting. There was a significant difference in the correlation between the circumference of the inner circle of the mesh by the shape of the netting and the body girth of the experimental individual (Pearson test,      ). There was no significant difference in the correlation between the selection ratio by the T0 netting, T45 netting, and T90 netting with a 70% hanging ratio (one-way ANOVA,   ). The results of this study showed that selectivity such as T45 netting and T90 netting appeared when the hanging ratio, which maximizes the area of T0 netting, was maintained at 70%.

Laver aquaculture, which occupies a large proportion in the aquaculture industry in Korea, is still highly dependent on human labor. Therefore, it is necessary to study the development of an automatic system to improve the working environment and increase the efficiency of aquaculture production systems. The purpose of this study is to evaluate the economic feasibility of an improved system in a study for the loading-unloading and automatic weighing systems in laver aquaculture industry. Economic analysis of the developed unloading and automatic weighing system were implemented under various conditions to calculate more accurate benefits and costs. As a result of this study, the economic feasibility was found to be very high in the three models: net present value (NPV), benefit-cost ratio (B/C), internal rate of return (IRR). Moreover, the results of sensitivity analysis showed that the economical efficiency of the automatic loading, unloading, and weighing system in laver aquaculture was very high.

Although it is highly dependent on the production of coastal and offshore fishing, the Fishing Vessels Safety Fisheries Act was enacted in 2019 due to the continuous increase in marine accidents of coastal and offshore fishing vessels. However, the law is too focused on fishing and navigation in certain waters and does not contain accident-preventive content. Ministry of Oceans and Fisheries proposes a plan to revise the Fishing Boat Safety Fishing Act through legal comparison with Japan's Seafarers' Labor Sanitation Rules. It also proposes an amendment that includes the content of the Seafarers Act on post-accident action obligations. Under the Fishing Vessels Safety Fishing Act, the safety fishing education is implemented for specific people and adopts a method of delivery education after completing the education. The reason for this is that the educational requirements are not sufficient compared to the number of education personnel. Moreover, four hours of education are conducted once a year, which is not suitable for insufficient educational conditions. For efficient safety fishing education, improvement measures are proposed compared to education in the United States and the United Kingdom.

This study analyzed the flow inside floating seedling equipment for Scapharca subcrenata. Due to the aging society of fishing villages, it is impossible to continuously input the labor force. Therefore, it is necessary to improve efficiency. Scapharca subcrenata has high per capita consumption. It serves as an important aquatic food resource. Scapharca subcrenata culture tends to be highly dependent on the natural environment. Production of Scapharca subcrenata is difficult to predict with low stability. In the past, manpower directly installed bamboo nets in mudflats. The seedling equipment devised in this study is a floating type and can be freely moved on the sea according to the prediction of Scapharca subcrenata generation. The flow around the floating seedling equipment was analyzed by numerical analysis. The physical phenomena of the flow around the net inside the floating seedling equipment were visualized. As a result, the space between the floating seedling equipment and the bottom net and the space between the net groups showed a lower flow rate than the inlet flow rate. It is expected that the low flow rate of the floating seedling equipment will have a positive effect on the attachment of Scapharca subcrenata.

This study deals with the maximum thermal load analysis and optimal capacity determination method of tank culture system for applying seawater source heat pump to save energy and realize zero energy. The location of the fish farm was divided into four sea areas, and the heat load in summer and winter was analyzed, respectively. In addition, two representative methods, the flow-through aquaculture system and the recirculation aquaculture system were reviewed as water treatment methods for fish farms. In addition, the concept of the exchange rate was introduced to obtain the maximum heat load of the fish farms. Finally, power consumption for heat pumps was analyzed in the view point of sea areas, tank capacity, and exchange rate based on the calculated maximum thermal load.

In this study, to control the heading angle of a ship, which is constantly subjected to various internal and external disturbances during the voyage, an LADRC (linear active disturbance rejection control) design that focuses more on improving the disturbance removal performance was proposed. The speed rate of change of the ship’s heading angle due to the turn of the rudder angle was selected as a significant factor, and the nonlinear model of the ship’s maneuvering equation, including the steering gear, was treated as a total disturbance. It is the similar process with an LADRC design for the first-order transfer function model. At this time, the gains of the controller included in LADRC and the gains of the extended state observer were tuned to RCGAs (real-coded genetic algorithms) to minimize the integral time-weighted absolute error as an evaluation function. The simulation was performed by applying the proposed GA-LADRC controller to the heading angle control of the Mariner class vessel. In particular, it was confirmed that the proposed controller satisfactorily maintains and follows the set course even when the disturbances such as nonlinearity, modelling error, uncertainty and noise of the measurement sensor are considered.

In order to provide basic data to increase the efficiency and stability of seamanship at anchoring, the characteristics of the hull motion including dragging anchor due to external forces were observed at Mokpo and Jinhae anchorage for the avoidance of the typhoon. As a result, it is necessary to check the embedding motion and holding power of the anchor according to at initial position to decrease dragging anchor. Dragging anchor at anchorage seems to have been easily caused according to discrepancy between embedded anchor flukes and the towing direction due to the change in wind direction, rather than the wind speed. This discrepancy, thus, should be considered when anchoring. This test vessel with a small radius of curvature of the stem is relatively vulnerable to the influence of wind direction and wind speed, so it is easy to cause a decrease in the holding power due to an increase in the rate of turn. When the current speed is greater than or equal to 1 knot, the range of the rate of turn is reduced resulting in a relatively increased holding power. In addition, during the swing, the tension of the chain was high according to the angular velocity change of heading at three-quarters of the swing length rather than the left and right ends.

The swimming behavior of pacific bluefin tuna (Thunnus orientalis) in the offshore sea cage of the brass fishing net was observed and analyzed by imaging sonar techniques. The cultured fish spent most of the time swimming a circular path along the circular cage wall and continued to swim only clockwise direction without completely changing the swimming direction during the 23-hour observation time. In addition, changed swimming behaviors were divided into four categories: (a) the behavior of a large group temporarily swimming in the opposite (counter clockwise) direction, (b) the behavior of a small group temporarily swimming in a small circular path, (c) the behavior swimming small circular path in the center of the cage, and (d) the behavior of a large group swimming across the center of the cage. The maximum swimming speed of the cultured fish was from 3.5 to 3.8 TL/s, the mode was from 1.2 to 1.4 TL/s and the swimming speed during the day time was faster than at night time. It was confirmed the cultured fish swam not only on the surface but also near the bottom net of the cage during the day, but swam mainly at the upper part of the cage at night.

This study used hydroacoustic method to identify the vertical and horizontal distribution of Antarctic silverfish in the Ross Sea, Antarctica. In February and December 2018, Antarctic silverfish was detected up to 250 meters, and was mainly distributed in water depths of 20 to 30 meters. The horizontal distribution of Antarctic silverfish was mostly undetected in February, and December showed a relatively stronger distribution than that of February. Antarctic silverfish is characterized by their distribution near sea ice.

In this study, samples of sea anchor canopy cloth mainly used in Korean jigging fishing vessels were collected and tested for performance evaluation. The canopy cloth of sea anchor is a basic element of form composition that is known to have the greatest influence on anchor performance. In order to evaluate the performance of sea anchor canopy cloth, five types of samples were tested for new metric count, tensile strength, water vapour transmission rate and drying speed according to the national standard (KS), and some correlations were identified. As a result of the test, the new metric count of cloths was 335.5-443.4 denier in warp and 217-447.6 denier in weft, and the minimum tensile strength was 860 N in warp direction and 430 N in weft direction. The apparent number and tensile strength of cloth were proportional, the water vapour transmission rate of the sample was 206.8 g/m 2 h, and the drying speed was 90-100 min. This study partially confirmed the performance evaluation based on speculation by the standard test method, and further research is needed on the clear relationship between the research results and the performance of the sea anchor.

In this study, a comparative test operation was conducted through the alternate haul method to examine the selectivity of the four mesh sizes (60 mm, 90 mm, 110 mm, and 130 mm) of the trawl codend. The selectivity was analyzed using the SELECT model considering the fishing efficiency (split parameter) of each fishing gear in the comparative test fishing operation in the trawl and the maximum likelihood method for parameter estimation. A selectivity master curve was estimated for several mesh sizes using the extended-SELECT model. As a result of analyzing the selectivity for silver croaker based on the results of three times hauls for each experimental gear, it was found that the size of the fish caught increased as the size of the mesh size increased. When the selectivity for each mesh size analyzed by the SELECT model considering the split ratio was evaluated based on the size of the AIC value, the estimated split model was superior to the equal split model. Based on the master curve, the 50% selection length value was 2.893, which was estimated to be 136 mm based on the mesh size of 60 mm. In some selectivity models, there was a large deviance between observed and theoretical values due to the non-uniformity of the distribution of fished length classes. As a result, it is considered that appropriate sea trials and selectivity evaluation methods with high reliability should be applied to present trawl fishery resource management methods.