검색결과

검색조건
좁혀보기
검색필터
결과 내 재검색

간행물

    분야

      발행연도

      -

        검색결과 85

        3.
        2023.02 KCI 등재 구독 인증기관 무료, 개인회원 유료
        지진은 예상하지 못한 위치와 규모로 지반을 흔들어서 막대한 물적 및 인적 피해를 발생시킨다. 따라서 지진으로 인 한 진동을 최소화하고 피해를 방지하기 위하여 다양한 내진 기술 개발 연구가 수행되고 있다. 최근에는 우수한 성능을 나타내 는 다양한 신소재가 개발되고 있으며 이를 접목된 내진 기술 개발 연구가 하나의 트렌드가 되고 있다. 본 연구에서는 반영구적 이고 자동복원이 가능한 신소재를 적용한 새로운 개념의 영구마찰 자동복원 댐퍼를 제안하고 핵심 부재에 대한 물리적 특성 검 증 연구를 수행한다. 영구마찰 자동복원 댐퍼의 핵심은 복원 특성을 나타내는 초탄성 형상기억합금과 폴리우레탄을 부재로 장 착시키고 추가적인 마찰 특성을 나타내는 네오디뮴 영구자석을 사용하였다. 이러한 핵심 부재는 재료실험을 통해 특성을 검증 하였고 도출된 거동 응답 결과를 통해 영구마찰 자동복원 댐퍼의 구조실험 예측 거동을 도출하였다. 우수한 복원 성능을 나타 내는 영구마찰 자동복원 댐퍼는 최대 하중 성능과 에너지 소산 능력이 우수하여 구조물에 적용 시 강한 지진에도 버티면서 발 생된 손상도 회복 시킬 수 있을 것으로 기대된다.
        4,000원
        4.
        2023.02 KCI 등재 구독 인증기관 무료, 개인회원 유료
        강진은 적절한 내진 설계 기술이 적용되지 않으면 건물 붕괴로 인하여 극심한 피해가 발생할 수 있다. 이를 해결할 수 있는 면진 기술은 구조물과 지반 사이에 베어링 장치를 적용하여 지진 에너지를 흡수하고 건물에 전달되는 진동을 감쇠한 다. 본 연구는 고무 마찰 베어링 장치의 구조물 적용성을 검증하고 지진으로부터 안전성을 확보하기 위하여 고무 마찰 베어링 프레임 구조물에 대한 수치해석을 수행하였다. 수치해석 결과로써 최대 지붕 가속도와 총 밑면 전단력이 감소되어 내진 성능을 확인하였다. 또한, 최대 층간 변위 및 최대 잔류 층간 변위에 대한 분석 결과로 프레임 구조물을 경제적 복구 수준의 결과를 도 출하여 고무 마찰 베어링 장치의 우수한 내진 성능을 확인하였다.
        4,000원
        5.
        2021.10 KCI 등재 구독 인증기관 무료, 개인회원 유료
        구조물의 지진 피해 감소를 위한 내진 시스템 중에서 면진 시스템은 효율적으로 내진 성능을 향상시킬 수 있는 구조 시스템이다. 면진 시스템은 지반과 구조물을 분리시키는 만큼 안전성이 뛰어나지만, 사용되는 장치의 계열에 따라 연직 및 수평 하중에 대한 지지력과 요구변형량에 대한 복원력이 부족하여 파손이 발생할 수 있다. 본 연구에서는 면진 시스템의 성능 개선을 위해 기존 연구에서 제안한 면진 장치의 지지력과 복원력을 향상시킨 고무 마찰 베어링 장치에 대하여 실험 및 해석을 통한 성능 검증 연구를 수행하였다. 이를 위해 고무 마찰 베어링 장치의 설계 상세를 재정립하고 요구 성능에 따른 구조 실험을 수행하여 장치 특성을 검증하였다. 또한, 실험 결과의 신뢰성 향상을 위한 유한요소해석을 수행하여 실험 결과와 유사한 성능 수 준의 장치 특성을 확인하였다.
        4,000원
        6.
        2020.09 KCI 등재 SCOPUS 구독 인증기관 무료, 개인회원 유료
        The effect of precipitation and dissolution of Si on the thermal diffusivity in the Al-Si alloy system is reported in this study and solution heat treatment followed by aging treatment is carried out to determine the effects of heat treatment on the thermal characteristics. The solution treatment is performed at 535 oC for 4 and 10 h and then the specimens are cooled by rapid quenching. The samples are aged at 300 oC for 4 h to precipitate Si solute. The addition of 9 wt% silicon contents makes the thermal diffusivity decrease from 78 to 74 mm/s2 in the cases of solid solution treated and quenched samples. After quenching and aging, the Si solute precipitates on the Al matrix and increases the thermal diffusivity compared with that after the quenched state. In particular, the increase of the thermal diffusivity is equal to 10 mm/s2 without relation to the Si contents in the Al-Si alloy, which seems to corresponded to solute amount of Si 1 wt% in the Al matrix.
        4,000원
        7.
        2019.08 KCI 등재 구독 인증기관 무료, 개인회원 유료
        우리나라는 지진으로부터 안전한 국가라는 인식이 형성되었으나 최근 경주와 포항 지진에 의해 발생된 구조물 피해로 구조물 안전성 확보를 위한 관심이 증가하고 있다. 국내 중저층 건축물에 다수 적용되고 있는 철골 모멘트 골조는 기본적인 내진성능을 보유하고 있지만 보-기둥 접합부의 소성변형으로 인한 취성파괴로 다양한 문제를 발생시킨다. 최근에는 이러한 문제를 해결하기 위해 구조물에 상온에서 잔류변형으로부터 원형복원이 가능한 초탄성 형상기억합금의 활용에 관한 연구가 진행되고 있다. 따라서 본 연구에서는 소성변형이 집중되는 보 플랜지 부재에 초탄성 형상기억합금 보강판을 활용한 보–기둥 접합부에 대하여 실험을 통한 실질적인 내진성능을 평가하고자 한다.
        4,000원
        9.
        2018.04 구독 인증기관·개인회원 무료
        This study investigates a new type of recentering damper system combining a shape memory alloy bar with initial tension force is proposed to improve the recentering of frictional damper dissipating energy. The recentering damper is a damper device with improved energy dissipation capability as well as a reduction in maintenance and reinforcement cost, and can be said to be a low-cost, high-efficiency damper device conforming to domestic reality. For the implementation of the theoretical mechanism for the recentering damper device, various parameters were selected and the theoretical and detailed design were carried out. In order to verify the design validity of the recentering damper, a high dimensional finite element analysis model was fabricated and analyzed using cyclic load. As a result of comparing and analyzing the behavior response of the recentering damper, it proved its superiority in terms of energy dissipation ability and stability. Based on these results, we propose an optimized system design method of recentering damper.
        10.
        2016.12 KCI 등재 구독 인증기관 무료, 개인회원 유료
        This study mainly evaluate the aseismic performance of the existing intake tower structure, which is one of the national important infra structures, on the basis of the refined finite element (FE) analysis results. The realistic evaluation for structural damage was conducted by using the nonlinear material model that takes tension and compression strength of deteriorate concrete into consideration during FE modeling. In addition, not only tension crack but also compression crushing was analyzed by utilizing field contour functions provided in the program during nonlinear dynamic analyses when peak ground acceleration (PGA) occurred. After observing FE analysis results, it can be shown that the damage of the intake tower is the most likely to occur at the water level and the base support.
        4,000원
        11.
        2016.11 KCI 등재 구독 인증기관 무료, 개인회원 유료
        The physiochemical properties of dried yam (Dioscorea batatas) by freeze dryer, cold-air dryer or hot-air dryer were examined for chromaticity, water absorption index (WAI), water soluble index (WSI), rehydration, viscosity properties and pasting properties. Freeze dried yam was maintained higher degree of lightness and higher WAI and WSI than those of cold-air or hot air dried one. In the case of rehydration, freeze dried yam was restored within one hour. The viscosity properties of freeze dried yam were the highest viscosity in all shear rates. Freeze dried yam was milled by roll mill (RM), pin mill (PM) or jet mill (JM) to evaluate for particle size, starch damage, pasting property and microstructure. Particle size was JM < PM < RM as 13.85~112.50 μm. In the result of starch damage, it was the highest value as 8.83 in JM, was the lowest value as 7.47 in RM. In pasting property, JM had relatively low viscosity at all shear rates. In the Microstructure by measuring scanning electron microscope, JM particle surfaces were rough with high starch damage, and particle size was confirmed fine particles in JM.
        4,000원
        12.
        2015.12 KCI 등재 구독 인증기관 무료, 개인회원 유료
        『西字奇蹟』은 마테오 리치에 의해 작성되고 1605년에 간행된 문서이며 한자에 대한 로마 자 발음 표기가 실려 있다. 로마자 발음 표기는 명대 말기의 중국어 음운 체계에 관한 정보 를 담고 있다고 생각된다. 본 논문은 이 로마자 발음 표기를 분석하여 명대 말기의 중국어 성모 체계의 특징을 살펴 보려고 하였다. 첫째, 탁음의 청화와 송기음화, 非敷奉母의 합류, 微 母 일부 글자들의 영성모화, 疑母의 일부 글자들의 영성모화와 影母, 喩母와의 합류, 知組와 章組의 합류, 莊組는 精組의 합류, er 음절의 변화 등을 반영하고 있다
        4,900원
        13.
        2014.09 KCI 등재 구독 인증기관 무료, 개인회원 유료
        Naphthothiazolo carbocyanine is of industrial importance as red-sensitizing dye in the spectral sensitization. Sensitizing dye was prepared by the reaction of 2-methyl-3- sulfopropyl-4,5-naphthothiazolium (inner salt) with triethyl orthopropionate in the presence of triethylamine. The product was identified by using various analytical tools such as elemental analyzer, IR spectrophotometer, UV-Vis spectrophotometer, 1H-NMR spectrometer, TGA and DSC. The maximum absorption peak in methanol solvent was 578nm. Therefore, it was concluded that naphthothiazolo carbocyanine dye can be used as sensitizing dye for the spectral sensitization of photographic emulsion and color cosmetics.
        4,000원
        14.
        2013.09 KCI 등재 구독 인증기관 무료, 개인회원 유료
        본 연구에서는 피로 회복 또는 원기 회복에 효능이 있는 것으로 알려진 홍경천과 홍삼을 이용하여 홍경천-홍삼 복합 발효물의 산화적 손상 억제 효과를 평가하고자 H2O2로 산화적 스트레스를 유도시킨 C2C12 근육세포에 홍경천-홍삼 복합 발효물의 처리한 후, 세포의 morphology, cell viability 및 항산화 효소들의 유전자 발현 양상을 비교, 분석하였다. 홍경천-홍삼 복합 발효물은 C2C12 근육세포의 cell viability를 유의적으로 증가시켰으며, Cu/Zn-SOD, Mn-SOD 및 GPx 등과 같은 세포내 항산화 효소의 발현을 증가시킬 뿐만 아니라, 근육세포 분화의 주요 전사인자인 Myo D의 발현 또한 증가시키는 것으로 나타났다. 이상의 결과로, 홍경천-홍삼 복합 발효물은 세포내 항산화 효소 시스템을 증가시켜 외부로부터의 산화적 손상에 대한 방어효능을 갖는 것으로 나타났으며, 향후 in vivo 시스템 이용한 추가적인 연구가 수행된다면, 홍경천-홍삼 복합 발효물을 이용한 항피로 건강기능식품의 소재개발이 가능할 것으로 판단된다.
        4,000원
        15.
        2013.09 KCI 등재 구독 인증기관 무료, 개인회원 유료
        The study was conducted to investigate the condition for mixed fermentation of Rhodilola sachalinensis with red ginseng using Lactobacillus acidophillus 128 and the changes of physicochemical properties and antioxidant activities before and after the lactic acid fermentation was examined. In the single fermentation of Rhodiola sachalinensis extract, the pH and titratable acidity rarely changed, and the number of lactic acid bacteria decreased greatly. On the other hand, in the lactic acid fermentation of Rhodiola sachalinensis-red ginseng mixed extract of 50% red ginseng content, the pH decreased, whereas the titratable acidity and the number of lactic acid bacteria increased. The solid content of optimal mixed extract for lactic acid fermentation was 0.5%. Sugar content decreased during fermentation, but total phenolic compounds tended to increase during fermentation. The salidroside and p-tyrosol content of the initial Rhodiola sachalinensis-red ginseng mixed extract was 419.5 ㎎% and 60.1 ㎎%, respectively; after fermentation, the salidroside content after lactic acid fermentation decreased greatly to 81.8 ㎎%, and the amount of p-tyrosol increased greatly to 324.9 ㎎%. The DPPH scavenging activity of Rhodiola sachalinensis-red ginseng mixed fermentate was 78.1% at 0.1% concentration, showing a tendency to increase as compared to 50.3% of Rhodiola sachalinensis-red ginseng mixed extract before the fermentation (p<0.05); it was a higher antioxidant activity as compared to the single fermentation of Rhodiola sachalinensis or red ginseng.
        4,000원
        16.
        2012.12 KCI 등재 구독 인증기관 무료, 개인회원 유료
        This study was conducted to develop HTHP ginseng (high temperature and high pressure ginseng) with improved antioxidative activity and phenolic acid composition by high temperature and high pressure process. The HTHP ginseng extract was analyzed for the total phenol content, DPPH radical scavenging activity and phenolic acid composition. The total phenol content was increased in HTHP ginseng (14.76 ㎎/g) compared to raw ginseng (3.59 ㎎/g) and red ginseng (3.93 ㎎/g). DPPH radical scavenging activities of HTHP ginseng, raw ginseng and red ginseng extracts were 4.8~78.4%, 1~47.4% and 1.8~56.5% at 1~100 ㎎/㎖ concentration. Also ABTS radical scavenging activities of HTHP ginseng, raw ginseng and red ginseng extracts were 8.9~99.8%, 3.4~96% and 1.2~96.5% at 1~100 ㎎/㎖ concentration. In HPLC analysis, amounts of measured phenolic acid of HTHP ginseng greatly increased than raw ginseng and red ginseng, but salicylic acid was not detected in HTHP ginseng. In addition, DPPH radical scavenging activity of phenolic acid from HTHP ginseng was increased. Consequently, we believe high temperature and high pressure process is better method than existing method to increase the bioactivity of ginseng.
        4,000원
        17.
        2012.12 KCI 등재 구독 인증기관 무료, 개인회원 유료
        Reactive oxygen species (ROS) are produced by oxidative stresses which cause various chronic diseases such as diabetes and obesity. Ginseng (Panax ginseng C.A. Mayer) has been reported to contain various biological activities such as anti-cancer, anti-diabetic, neuroprotective, radioprotective, anti-amnestic and anti-aging effects. In this study, we investigated the effects of Panax ginseng, treated with high temperatures and high pressures, on oxidative stress in C2C12 myoblasts and 3T3-L1 adipocytes. Oxidative stress was induced in the C2C12 cells through the introduction of H2O2 (1 mM), and cells were then treated with various ginseng preparations: dried white ginseng (DG), steamed ginseng (SG) and high temperature and high pressure treated ginseng (HG). In addition, 3T3-L1 preadipocytes were treated with various ginsengs for up to 8 days following standard induction of differentiation. Our results show that HG treatment significantly protected oxidative stress in both cell lines and enhanced gene expression of antioxidant enzymes. Therefore, in this study, we investigated the protective effects of ginseng on the oxidative stress of adipocytes and muscle cells.
        4,000원
        18.
        2012.12 KCI 등재 구독 인증기관 무료, 개인회원 유료
        Rhodiola sachalinensis fermentates by lactic acid bacteria were prepared using the adsorption process, and were investigated for changes of the main compounds and anti-oxidative activities during the adsorption and fermentation process. While the R. sachalinensis extract (RSE), which did not go through the adsorption process, showed little change in pH during fermentation and a significant reduction in the number of lactic acid bacteria, the pre-preparatory adsorption process was found to be helpful for promoting fermentation and for maintenance of bacterial numbers. The contents of total phenolic compounds mostly decreased during the adsorption process, but showed an increasing tendency to rebound during the fermentation process. The contents of salidroside and p-tyrosol in the RSE were 1153.3 ㎎% and 185.0 ㎎% respectively, and they did not significantly change after treatment with acid clay or bentonite as adsorbents, which were 1093.0 and 190.5 ㎎% by acid clay, and 882.2 and 157.3 ㎎% by bentonite. When the extract was fermented after treatment with acid clay or bentonite, the salidroside contents were decreased by 282.7 and 505.0 ㎎% respectively, but the p-tyrosol contents were increased by 714.0 and 522.4 ㎎% respectively. Compared to the DPPH radical scavenging activity of the RSE (66.8%) at the conc. of 0.1%, that of the fermented RSE, which went through adsorption process with acid clay or bentonite, was significantly increased to 79.4 and 72.7% respectively at the same concentration (p<0.05). Though fermentation by lactic acid bacteria was suppressed in the RSE, the results suggested that the adsorption process may promote fermentation without any change in the content of major active compounds. It is expected that fermentation by lactic acid bacteria could improve the antioxidant activity and various associated functionalities of R. sachalinensis.
        4,000원
        19.
        2012.12 KCI 등재 구독 인증기관 무료, 개인회원 유료
        In this study, we examined immuno-modulatory activities of crude polysaccharides from wild ginseng adventitious roots (WGAR). The crude polysaccharide (WGAR-CP) was isolated from WGAR by hot water extraction, ethanol precipitation, and dialysis. The major constituents in WGAR-CP were neutral sugar (64.77%), and uronic acid (34.32%). WGAR-CP demonstrated anti-complementary activity dose-dependently. The immuno-modulatory effects of WGAR-CP were also analyzed by measuring nitric oxide and cytokines in the supernatants of mouse peritoneal macrophages. Mouse peritoneal macrophages stimulated with WGAR-CP produced nitric oxide and various cytokines such as interleukin (IL)-6 and IL-12 in a dosedependent manner. In conclusion, WGAR-CP may have immuno-modulatory activities by activating a complementary system and macrophages, which produces cytokines.
        4,000원
        20.
        2012.04 KCI 등재 SCOPUS 구독 인증기관 무료, 개인회원 유료
        Recently, various attempts to produce a heat sink made of Al 6xxx alloys have been carried out using die-casting. In order to apply die-casting, the Al alloys should be verified for die-soldering ability with die steel. It is generally well known that both Fe and Mn contents have effects on decreasing die soldering, especially with aluminum alloys containing substantial amounts of Si. However, die soldering has not been widely studied for the low Si aluminum (1.0~2.0wt%) alloys. Therefore, in this study, an investigation was performed to consider how the soldering phenomena were affected by Fe and Mn contents in low Si aluminum alloys. Each aluminum alloy was melted and held at 680˚C. Then, STD61 substrate was dipped for 2 hr in the melt. The specimens, which were air cooled, were observed using a scanning electron microscope and were line analyzed by an electron probe micro analyzer. The SEM results of the dipping soldering test showed an Al-Fe inter-metallic layer in the microstructure. With increasing Fe content up to 0.35%, the Al-Fe inter-metallic layer became thicker. In Al-1.0%Si alloy, the additional content of Mn also increased the thickness of the inter-metallic layer compared to that in the alloy without Mn. In addition, EPMA analysis showed that Al-Fe inter-metallic compounds such as Al2Fe, Al3Fe, and Al5Fe2 formed in the die soldering layers.
        4,000원
        1 2 3 4 5