Molten salt reactors represent a promising advancement in nuclear technology due to their potential for enhanced safety, higher efficiency, and reduced nuclear waste. However, the development of structural materials that can survive under severe corrosion environments is crucial. In the present work, pure Ni was deposited on the surface of 316H stainless steel using a directed energy deposition (DED) process. This study aimed to fabricate pure Ni alloy layers on an STS316H alloy substrate. It was observed that low laser power during the deposition of pure Ni on the STS316H substrate could induce stacking defects such as surface irregularities and internal voids, which were confirmed through photographic and SEM analyses. Additionally, the diffusion of Fe and Cr elements from the STS316H substrate into the Ni layers was observed to decrease with increasing Ni deposition height. Analysis of the composition of Cr and Fe components within the Ni deposition structures allows for the prediction of properties such as the corrosion resistance of Ni.

This study was conducted to selection and investigate appropriate conditions for mass production of antagonistic microbes to control cobweb disease caused by Cladobotryum mycophilum. A grampositive bacterium was isolated from spent substrate of Agaricus bisporus and showed significant antagonistic activity against Cladobotryum mycophilum. The bacterium was identified as Bacillus altitudinis. based on the cultural, biochemical and physiological characteristics, and 16S rRNA sequence. The isolate is saprophytic, but not parasitic nor pathogenic to cultivated mushroom whereas it showed strong inhibitory effects against C. mycophilum cells in vitro. The control efficacy of B. altitudinis HC7 against cobweb disease of C. mycophilum was up to 78.2% on Agaricus bisporus. The suppressive bacterium may be useful for the development of biocontrol system. To define the appropriate conditions for the mass production of the Bacillus altitudinis HC7, we have investigated appropriate culture conditions and effects of various nutrient source on the bacterial growth. The appropriate initial pH and temperature were determined as pH 6.0 and 30oC, respectively. The appropriate concentration of medium elements for the growth of pathogen inhibitor bacterium(Bacillus altitudinis HC7) was determined as follows: 3.0% soluble startch, 10% soytone, 1.0% (NH4)2HPO4, 1.0 mmol KCl, and 0.5% L-asparagine.

In this study, we collected and analyzed the current status of licenses for the limited fishery business and divided the problems related to licenses for the limited fishery business into partial damage compensation and cancellation compensation areas. In the case of partial damage compensation areas due to existing public water use projects, it is suggested that the issuance of licenses for limited fishery businesses should be reconsidered. In the case of cancellation compensation areas, it is recommended that the disposition of communal fishery businesses that do not require capital investment should be the principle. If capital such as facilities are invested, compensation should be made by Article 52 of the Enforcement Decree of the Land Compensation Act if the licenses for limited fishery business are closed due to other development projects. In addition, we proposed an improvement plan to establish a rational management system for licenses for limited fishery businesses. In addition to these improvement measures, we hope that further investigation and research on licenses for limited fishery business, which have been insufficient so far, will be conducted to promote the comprehensive use of fisheries resources and waters and the sustainable development of fisheries that are the objectives of the Fisheries Act, and contribute to the improvement of the quality of life of the people and the balanced development of the national economy.

Highly safe lithium-ion batteries (LIBs) are required for large-scale applications such as electrical vehicles and energy storage systems. A highly stable cathode is essential for the development of safe LIBs. LiFePO4 is one of the most stable cathodes because of its stable structure and strong bonding between P and O. However, it has a lower energy density than lithium transition metal oxides. To investigate the high energy density of phosphate materials, vanadium phosphates were investigated. Vanadium enables multiple redox reactions as well as high redox potentials. LiVPO4O has two redox reactions (V5+/V4+/V3+) but low electrochemical activity. In this study, LiVPO4O is doped with fluorine to improve its electrochemical activity and increase its operational redox potential. With increasing fluorine content in LiVPO4O1-xFx, the local vanadium structure changed as the vanadium oxidation state changed. In addition, the operating potential increased with increasing fluorine content. Thus, it was confirmed that fluorine doping leads to a strong inductive effect and high operating voltage, which helps improve the energy density of the cathode materials.

우리나라 여러 해양환경 지역으로부터 확보한 370주의 해양세균, 균류, 미세조류로부터 기초생 리활성(항산화, 항염, 항균, 항암, 항바이러스)을 조사하여 채집지, 분리원, 종(種) 수준에서의 활성결과를 비교하였다. 해양세균의 경우, 일반적으로 유용성이 많이 알려진 Streptomyces 속 과 Bacillus 속에 속하는 균주들이 두드러진 강한 효능이 관찰되었고, 주로 해양퇴적물로부터 유용한 자원을 분리할 수 있었다. 해양균류와 미세조류의 경우에도 종 특이적으로 활성이 강 하게 나타나는 결과를 확인할 수 있었고, 효능 특이적으로 활성을 보이는 결과도 얻을 수 있었 다. 이러한 결과를 바탕으로 추후 특정질병에 선택적으로 효능을 보이는 화학물질 연구 또는 자원 기반 연구 수행 시 유용성을 전제로 한 자원 확보 전략 수립과 산업 활성화를 위한 전 략소재로 우선적 접근이 용이할 수 있는 연구결과라 생각된다. 또한, 이들 결과를 해양바이오 뱅크를 통한 분양소재로 활용함으로써 학계, 산업계에서 활용하여 해양바이오산업 활성화에 좀 더 빠른 접근을 도울 수 있다고 생각한다.

It is essential to select materials with excellent mechanical properties to prevent chemical and mechanical damage to the surfaces of materials used in machines and structures and to extend their lifespan. Co-based stellite alloy, which has wear resistance, heat resistance, and corrosion resistance, is essential for products used in harsh environments. However, due to the problem of enormous costs, research on hard facing, which uses a stellite coating layer only on the contact surface, is urgently required. Currently, high-facing research on Stellite coating layers is focused on powder, and GMAW research using wire is relatively lacking. In this study, welding experiments were performed to form stable weld beads using stellite 6 welding wire, and the correlation between parameters and weld beads was analyzed. A CMT welder was used to minimize the heat effect on the base material.