Recently, domestic fishing production of Japanese horse mackerel has been continuously decreasing. To achieve sustainable fishing of this species, it is essential to acquire its target strength (TS) for accurate biomass estimation and to study its ecological characteristics. To date, there has been no TS research using a broadband echosounder targeting Japanese horse mackerel. In this study, for the first time, we synchronized an underwater camera with a broadband frequency (nominal center frequency of 200 kHz, range: 160-260 kHz) to measure the TS according to the body size (16.8-35.5 cm) and swimming angle of the species. The relationship between Japanese horse mackerel length and body weight showed a general tendency for body weight to increase as length increased. The pattern of the frequency spectra (average values) by body length exhibited a similar trend regardless of body length, with no significant fluctuations in frequency observed. The lowest TS value was observed at 243 kHz while the highest TS values were recorded at 180 and 257.5 kHz. The frequency spectra for the swimming angles appeared to be flat at angles of –5, 0, 30, 60, 75, and 80° while detecting more general trends of frequency spectra for swimming angle proved challenging. The results of this study can serve as fundamental data for Japanese horse mackerel biomass estimation and ecological research.

본 논문에서는 다양한 분야에 적용할 수 있는 자동화 동시 인상 시스템을 3D 콘크리트 프린팅에 적용하여 동시 인상이 가능한 3D 콘크리트 프린팅 시스템으로 개발하였다. 개발된 시스템은 3D 콘크리트 프린팅 작업 중 측정되는 인상량을 피어슨 상관계수를 통해 분석하고, 유압시스템을 사분위수 기법으로 실시간 모니터링하여 안전하고 정밀한 인상이 가능하다. 이를 활용하면 3D 콘크리트 프 린팅 구조물의 출력 품질을 확보함과 동시에 3D 콘크리트 프린팅의 규모보다 큰 구조물을 출력할 수 있다. 시스템의 성능을 평가하기 위해 기존의 3D 콘크리트 프린팅과 동시 인상이 가능한 3D 콘크리트 프린팅을 각각 이용하여 시편을 출력하였다. 출력된 시편은 3D 스캐너를 활용하여 측정하였다. 스캔한 시편의 층별 직경과 시편의 교차각을 측정하였으며, 분석을 통해 동시 인상이 가능한 3D 콘크 리트 프린팅의 성능을 검증하였다.

PURPOSES : The purpose of this study is to verify the influences on the compactibility evaluation of WMA (Warm Mix Asphalt) mixture by laboratory experiments. METHODS : Two types of WMA additives (chemical and wax types) and two types of compactors (marshall and gyratory) are used in laboratory experiments. In addition, two types of WMA processes (wet and dry) are tested to verify the impact of manufacturing process. RESULTS : The laboratory results show that the effects of compaction method on compactibility are different depending on the type of additive. The compaction method has a significant impact on WMA mixture with chemical type additive to extent that it determines whether required criterion is satisfied, but only little on WMA mixture with wax type additive. In the case of wet process for WMA mixture manufacturing, it is hard to assess the air void of HMA mixture made of same asphalt binder used in WMA mixture since the additive has already been added in asphalt binder. And the test results show that air voids of HMA mixture vary within properties of asphalt binder. CONCLUSIONS : Through this study, it is found that compactibility of WMA mixture is affected by the compaction methods depending on the additive types and by the WMA mixture manufacturing process. Therefore, those are recommended to be considered when evaluating compactibility of WMA mixtures.

The study confirmed the "house search report(家宅搜索調書)" containing criminal records during the Japanese colonial period, as well as the production process and the way of expressing the illustrations contained in them. It also explored architectural values through analysis of the location and use of the building. This records the discovery of evidence by searching the residences of those involved in the crime from 1919 to 1922. The illustrations contained in this record were not standardized, so the contents of the article differed depending on the author's background and cultural experience. Nevertheless, this painting reflects the regional characteristics of traditional houses located throughout the Korean Peninsula. It is also evidence that the house was used for cultural, commercial, and industrial purposes, beyond the general assumption that it was used only for residential purposes. The "House Search Report(家宅搜索調書)" provides information on ordinary buildings that existed as the background of everyday life, rather than buildings with a specific purpose or exceptional design. It is evaluated as an important resource for understanding the diverse life and spatial structures of buildings during that time.

This study aimed to assess and determine the optimal model for predicting the full bloom date of ‘Fuji’ apples across South Korea. We evaluated the performance of four distinct models: the Development Rate Model (DVR)1, DVR2, the Chill Days (CD) model, and a sequentially integrated approach that combined the Dynamic model (DM) and the Growing Degree Hours (GDH) model. The full bloom dates and air temperatures were collected over a three-year period from six orchards located in the major apple production regions of South Korea: Pocheon, Hwaseong, Geochang, Cheongsong, Gunwi, and Chungju. Among these models, the one that combined DM for calculating chilling accumulation and the GDH model for estimating heat accumulation in sequence demonstrated the most accurate predictive performance, in contrast to the CD model that exhibited the lowest predictive precision. Furthermore, the DVR1 model exhibited an underestimation error at orchard located in Hwaseong. It projected a faster progression of the full bloom dates than the actual observations. This area is characterized by minimal diurnal temperature ranges, where the daily minimum temperature is high and the daily maximum temperature is relatively low. Therefore, to achieve a comprehensive prediction of the blooming date of ‘Fuji’ apples across South Korea, it is recommended to integrate a DM model for calculating the necessary chilling accumulation to break dormancy with a GDH model for estimating the requisite heat accumulation for flowering after dormancy release. This results in a combined DM+GDH model recognized as the most effective approach. However, further data collection and evaluation from different regions are needed to further refine its accuracy and applicability.

This study was conducted to determine the optimal irrigation starting point by analyzing tree growth, physiological responses, fruit quality, and productivity in peach orchards. Seven-year-old ‘Kawanakajima Hakuto’ peach trees were used in an experimental field (35°49′30.4″N, 127°01′33.2″E) located within the National Institute of Horticultural and Herbal Science located in Wanju-gun, Jeollabuk-do. The irrigation starting point was set with four levels of –20, –40, –60, and –80 kPa from June to September 2022. While there were no significant differences in increase of trunk cross-section area and leaf area among treatments, shoot length and diameter decreased in the –80 kPa and –20 kPa treatments. The photosynthetic rate measured in August was highest for –60 kPa (17.7 μmol·m-2·s-1), followed by –40 kPa (15.6 μmol·m-2·s-1), –20 kPa (14.5 μmol·m-2·s-1) and –80 kPa (14.0 μmol·m-2·s-1). SPAD value measured in May and August was lower in the –80 kPa and –20 kPa treatments than in the –60 kPa and –40 kPa treatments. The harvest date reached three days earlier in the –20 kPa treatment compared to other treatments. The fruit weight was highest in the –60 kPa (379.1 g), followed by –40 kPa (344.0 g), –80 kPa (321.0 g) and –20 kPa (274.9 g). Firmness was the lowest in the –20 kPa treatment. The soluble solid content was highest in the –60 kPa treatment (13.3°Bx).The ratio of marketable fruits was highest in the –60 kPa treatment (50.7%) and lowest in the –80 kPa treatment (23.4%). In conclusion, we suggest that setting the irrigation starting point at –60 kPa could improve the fruit quality and yield in peach orchards.

This study used optical and scanning electron microscopy to analyze the surface oxidation phenomenon that accompanies a γ'-precipitate free zone in a directional solidified CM247LC high temperature creep specimen. Surface oxidation occurs on nickel-based superalloy gas turbine blades due to high temperature during use. Among the superalloy components, Al and Cr are greatly affected by diffusion and movement, and Al is a major component of the surface oxidation products. This out-diffusion of Al was accompanied by γ' (Ni3Al) deficiency in the matrix, and formed a γ'-precipitate free zone at the boundary of the surface oxide layer. Among the components of CM247LC, Cr and Al related to surface oxidation consist of 8 % and 5.6 %, respectively. When Al, the main component of the γ' precipitation phase, diffused out to the surface, a high content of Cr was observed in these PFZs. This is because the PFZ is made of a high Cr γ phase. Surface oxidation of DS CM247LC was observed in high temperature creep specimens, and γ'-rafting occurred due to stress applied to the creep specimens. However, the stress states applied to the grip and gauge length of the creep specimen were different, and accordingly, different γ'-rafting patterns were observed. Such surface oxidation and PFZ and γ'-rafting are shown to affect CM247LC creep lifetime. Mapping the microstructure and composition of major components such as Al and Cr and their role in surface oxidation, revealed in this study, will be utilized in the development of alloys to improve creep life.

Fouling is an inevitable problem in membrane water treatment plant. It can be measured by trans-membrane pressure (TMP) in the constant flux operation, and chemical cleaning is carried out when TMP reaches a critical value. An early fouilng alarm is defined as warning the critical TMP value appearance in advance. The alarming method was developed using one of machine learning algorithms, decision tree, and applied to a ceramic microfiltration (MF) pilot plant. First, the decision tree model that classifies the normal/abnormal state of the filtration cycle of the ceramic MF pilot plant was developed and it was then used to make the early fouling alarm method. The accuracy of the classification model was up to 96.2% and the time for the early warning was when abnormal cycles occurred three times in a row. The early fouling alram can expect reaching a limit TMP in advance (e.g., 15-174 hours). By adopting TMP increasing rate and backwash efficiency as machine learning variables, the model accuracy and the reliability of the early fouling alarm method were increased, respectively.