Cooked rice stickiness is one of the critical quality factors. A new data processing method from a simple experiment detaching after compressing cooked rice on a platform of texture analyzer was developed to create a new instrumental parameter which represents a true stickiness from sensory evaluation. The proposed idea was that the contact area produced by compressing with a fixed magnitude of force should vary with the sample’s consistency, ending up distorting the stickiness simply measured as the detaching force. Therefore, a corrected stickiness was defined by considering the contact area and converting to a stress (force/area) from just a force. The contact area could be estimated from the volume, density and thickness of samples. Even the compression force was converted to a corrected compression force by dividing by the contact area. The new corrected parameters turned out well to show a much better agreement with the sensorial stickiness than the uncorrected stickiness.

The autoregressive method provides a univariate procedure to predict the future sunspot number (SSN) based on past record. The strength of this method lies in the possibility that from past data it yields the SSN in the future as a function of time. On the other hand, its major limitation comes from the intrinsic complexity of solar magnetic activity that may deviate from the linear stationary process assumption that is the basis of the autoregressive model. By analyzing the residual errors produced by the method, we have obtained the following conclusions: (1) the optimal duration of the past time for the forecast is found to be 8.5 years; (2) the standard error increases with prediction horizon and the errors are mostly systematic ones resulting from the incompleteness of the autoregressive model; (3) there is a tendency that the predicted value is underestimated in the activity rising phase, while it is overestimated in the declining phase; (5) the model prediction of a new Solar Cycle is fairly good when it is similar to the previous one, but is bad when the new cycle is much different from the previous one; (6) a reasonably good prediction of a new cycle can be made using the AR model 1.5 years after the start of the cycle. In addition, we predict the next cycle (Solar Cycle 25) will reach the peak in 2024 at the activity level similar to the current cycle.

The tobacco cutworm, Spodoptera litura(Fabricius), is a major pest of tomato and frequently demands control measures. The timing of insecticide application is a key factor in determining its efficiency, so an experiment was designed to investigate this. Application of insecticide was based on three criteria: (i) the number of trap-caught moths in a Delta-type trap with a commercial sex pheromone lure placed in the center of the target area, soon after plant emergence; (ii) the percentage of plants exhibiting pinhole-type damage (10% or 20%) and (iii) the percentage of plants exhibiting shot hole-type damage (10% or 20%) compared to a check plot without any control measures. We found that the number of trap-caught moths was, compared to the other methods, the best means of deciding on insecticide application in tomato plant to control the tobacco cutworm. Using pheromone traps, we obtained the best performance of the insecticide Shinnago, causing > 90% larval mortality. Without insecticide application, tomato yield reduction due to the tobacco cutworm larva damage was 27%.

Five phaP family genes and one phaR gene have been identified in the genome of Burkholderia gut symbiont. PhaP proteins function as surface proteins of polyhydroxyalkanoate (PHA) granules, and PhaR protein acts as a negative regulator of PhaP biosynthesis. To address the biological roles of four phaP family genes (phaP1, phaP2, phaP3, and phaP4) and the phaR gene during insect-gut symbiont interaction, these Burkholderia mutants were fed to the second instar nymph. The ΔphaR mutant decreased the colonization ability in the host midgut compared to wild-type Burkholderia cells and negatively affected the host insect’s fitness compared with wild-type infected host. These results demonstrate that PhaR plays an important role in the biosynthesis of PHA granules and it is significantly related to the colonization of the Burkholderia gut symbiont in the host insects’ midgut

Binary Ti-Al alloys containing 50 to 60 atomic percent aluminum are rapidly solidified by hammer anvil method under an argon atmosphere. Constituent phases in each alloy are identified by X-ray diffractometry and microstructures of the alloys are investigated using a transmission electron microscope. In alloys with aluminum content between 50 and 54 percent, a second phase exists besides TiAl(γ); this second phase is identified as Ti3Al(α2). The α2 phase is observed in two types of morphology. One is as fine lamellar alternating with γ and the other is as a particle. It is concluded that the existence of a metastable phase with the morphologies stated above should arise from a higher quenching rate attained by the hammer anvil method as compared to the conventional roll or splat-quench method. Implications of the above observation are discussed with respect to the phase relations in the Ti-Al binary system; these implications are still controversial in many respects.

Grain morphology, phase stability and mechanical properties in binary Ti-Al alloys containing 43-52 mo1% Al have been investigated. Isothermal forging was used to control the grain sizes of these alloys in the range of 5 to 350 μm. Grain morphology and volume fraction of α2 phase were observed by optical metallography and scanning electron microscopy. Compressive properties were evaluated at room temperature, 1070 K, and 1270 K in an argon atmosphere. Work hardening is significant at room temperature, but it hardly took place at 1070 K and 1270 K because of dynamical recrystallization. The grain morphologies were determined as functions of aluminum content and processing conditions. The transus curve of α and α+γ shifted more to the aluminum-rich side than was the case in McCullough’s phase diagram. Flow stress at room temperature depends strongly on the volume fraction of the α2 phase and the grain size, whereas flow stress at 1070 K is insensitive to the alloy composition or the grain size, and flow stress at 1270 K depends mainly on the grain size. The α2 phase in the alloys does not increase the proof stress at high temperatures. These observations indicate that improvement of both the proof stress at high temperature and the room temperature ductility should be achieved to obtain slightly Ti-rich TiAl base alloys.

이 논문은 예이츠의 시 ｢청금석｣의 상반되는 동서학자들의 분석을 검토 한다. 서구의 학자들이 이 시에서 비극적 기쁨의 보편적 의미를 보려 하지만, 동양의 학자들은 이 시가 예이츠의 동양의 예술과 미학에의 심취를 들어 낸 것으로 읽고자 한다. 이 상반된 견해는 칼빈 비디언트와 주단이 이 시의 중국의 풍경화를 논의한 연구에서 가장 잘 대비된다. 비디언트는 중국의 풍경화를 시인의 나르시스트적 자기표현 으로 보지만, 주단은 그 풍경을 시인 자신의 영감의 원천으로 읽는다. 본 논문은 이 시에서 중국의 풍경이 촉발한 동서 회화시의 전통의 충돌로 읽는 제임스 헤퍼넌의 시 각예술과 문학 사이의 긴장된 협상으로 보는 회화시 이론에 근거하여 본 논문은 예이 츠 자신의 시작 과정에서 동서의 영향의 복잡성을 들어내고 있음을 보여주며, 이 때 엑스프라시스는 범텍스트적, 범 문화적 사건으로 나타난다. 마지막으로, 세계적인 예이 츠 연구 동향에 미루어, 이 논문은 엑스프라시를 읽는 방법으로서 범텍스트적, 범문화 적 접근이 해석학적 근거와 문맥의 이해를 쉽게 할 수 있다는 것을 보여 준다.

목 적: 안경과 콘택트렌즈 구매장소에 따라 안경사의 직무신뢰도 및 안경과 콘택트렌즈 가격의 만족도에 대한 의견 차이가 있는지에 대하여 알아보고자 하였다. 방 법: 2015년 5월에서 6월 두 달 동안 대구·경북, 부산·경남지역의 안경광학과 재학생과 고객을 대상 으로 안경과 콘택트렌즈 구매 장소, 안경사의 판매 및 검안에 대한 신뢰도 및 안경과 콘택트렌즈 구매가격 만족도에 대한 설문을 실시하였다. 결 과: 직무신뢰도에서 검안은 남자의 평균값이 가장 높았고(3.89±0.88), 가격만족도에서는 모두 여자 의 평균값이 높았다(3.18±0.72). 구매장소에 따른 상관관계에서는 비 프랜차이즈의 검안신뢰도가 가장 높 았다(3.99±0.91). 결 론: 구매장소에 따른 직무신뢰도와 가격만족도에 대하여 일부 항목에서 유의한 차이가 나타났고, 이 결과를 바탕으로 직무신뢰도와 가격만족도를 높이는 자료로 이용될 수 있을 것이라고 생각한다.

Honey production from approximately 1.7 million colonies owned by around 21 thousand Korean beekeepers was almost 36 thousand M/T in 2014. Honey farmers have mainly obtained commodities such as honey, beeswax, pollen and royal jelly. Honeybees gather the nectars and pollens from flowers of plants or trees. Bee pollen is rich in various nutrients and called as natural complete food. Bee pollens of Quercus acutissima, Actinidia arguta, Amorpha fruticosa, Oryza sativa, Chrysanthemum morifolium and Salix koreensis were mainly collected by Apis mellifera in Korea. But stiff pollen wall hinders dissolution of polysaccharides and lowers extraction efficiency. Thus, we measured antioxidant activity as DPPH radical scavenging assay system on six kinds of pollens inoculated with fungi to confirm the husk removal effect. The antioxidant activity was evaluated by measuring the free radical scavenging activity using 2,2-diphenyl-1-picrylhydrazyl (DPPH). Briefly, extracts prepared from different extraction conditions were mixed with freshly prepared DPPH solution. After shaking, the reaction mixtures were stand for 30 min at room temperature in dark places. The radical scavenging activity was determined by measuring the absorbance at 517 nm. The relative radical scavenging activity (%) was calculated as [1-absorbance of solution with sample and DPPH / absorbance of solution with DPPH] x 100. The scavenger activities of Quercus acutissima, Actinidia arguta, Amorpha fruticosa, Oryza sativa, Chrysanthemum morifolium and Salix koreensis were 42.73±1.25, 8.98±1.46, 4.38±3.53, 36.09±0.74, 17.28±1.95 and 62.76±2.07 at 500㎕/㎖, respectively.

Isaria farinosa (Hypocreales, Ascomycota) is a cosmopolitan entomopathogenic fungus affecting a wide range of arthropod hosts. It has mainly been studied as a insecticidal agent to control the agricultural pests. To investigate the useful secondary metabolite(SM) genes in Isaria farinosa C1012 strain, de novo assembly and genome mining were carried out. A whole genome sequencing with PacBio RSII system generated NGS reads greater than 4Gb, which were assembled into 16 contigs using FALCON program. The total size of genome was 33.36Mb. The N50 and N90 were 6,686,213 and 1,912,865bp, respectively. The assembled genome data was analyzed with antiSMASH3 program with a default setting to localize the gene region responsible for synthesizing SMs, such as non-ribosomal peptide synthetases (NRPS) and polyketide synthase (PKS). In this study, we predicted 16 NRPS, 13 PKS, and 9 PKS-NRPS hybrid gene clusters in I. farinosa genome.

Plant growth and development strongly influenced by light quantity and its spectral composition. Young tomato plants were cultivated in growth cabinets under artificial light provided by red and blue light emitting diodes(LEDs) during 12 hours, then plants were exposed to monochromatic ultraviolet, blue, green and red lights as an end-of-day(EOD) treatment during 4 hours to study their effect on plant growth parameters. EOD lighting from various LEDs increased total fresh and dry weights as well as assimilation area compared to those in control. Blue light increased stem height, internode length and stem diameter. Monochromatic UV-A light reduced stem elongation, highly increased stomatal conductance. Compactness and health index of young tomato plants were increased in UV-A and red light treatments.

This study aims to investigate the effects of ankle foot orthosis(AFO) on the activities of tibialis anterior(TA), soleus(Sol), rectus femoris(RF) and biceps femoris(BF) during stairs descending. The activities of TA, Sol, RF and BF were initially measured while descending 4 stairs without using AFO. The activities of the same muscles were then measured again while descending 4 stairs while using AFO. Wilcoxon signed-rank tests were used to analyze the results in order to examine the differences between the with using AFO and without using AFO. Although the activities of TA, Sol and RF were relatively lower while using AFO than without using AFO, only the differences in Sol and RF activities were significant(p<0.05). The activity of BF was relatively higher while using AFO compared to the activity of BF observed without using AFO. However, difference was not significant(p>0.05). Conclusion of this study was observed since AFO’s ground reaction force absorption during stairs descending reduced the need to use So and RF that is related to shock absorption. BF activity was increased with AFO than without during standing forward to correct the trunk stability.