농촌진흥청 국립원예특작과학원에서는 2018년 분홍색계 소 형 호접란 ‘Tiny Bell’을 육성하였다. 2010년 진분홍색 다화 성 소형 품종 Phalaenopsis ‘D07PN16’와 연분홍색 소형종 P. ‘D03PN22’를 모본과 부본으로 교배하였다. 2014년 생육이 우 수하고 화색, 화형, 꽃대수 등 개화 특성이 우수한 ‘10531-53’ 개체를 선발하여 기내 화경배양을 통해 증식하였다. 2014년부 터 2018년까지 1차, 2차특성검정을 통해 품종의 안정성과 균 일성을 확인한 후 ‘Tiny Bell’로 명명하였다. 이 품종은 밝은 보라빛 분홍색(RHS, PVGN80A)을 띄며, 가장자리에 백색무늬 를 가지는 것이 특징이다. 평피기 형태의 꽃은 길이와 폭이 각각 3.89, 4.01cm이며, 총상화서로 분지가 발생한다. 1개의 꽃대에 19.7개의 소화가 착생하여 꽃 수가 많이 달리는 다화 성이며, 꽃대 길이는 28.48cm정도이다. ‘Tiny Bell’은 생육시 잎이 수평으로 자라며 길이와 폭은 각각 13.1cm, 5.3cm였다. 신품종인 ‘Tiny Bell’은 소형 분화용으로 이용 가능할 것이다.

섬꼬리풀과 큰구와꼬리풀은 관상 가치가 뛰어나다고 평가 되는 우리나라 자생식물이다. 본 연구는 서로 다른 차광수준 에서 자생식물의 생장을 조사하고 적절한 차광조건을 제안하 는 것에 목적이 있다. 이전 차광 연구를 살펴보았을 때 차광 처리에 따라 영향을 받을 수 있는 토양 수분에 대해 조절하거 나 이에 대한 언급이 없는 경우가 많았다. 본 실험은 다른 차 광 조건에서도 토양 수분을 동일하게 유지하기 위해 FDR방식 의 토양수분센서를 활용한 자동 관수 시스템을 사용하였다. 또한 정원 식재를 고려하여 실내 환경이 아닌 우발적인 강우 가 발생하는 노지 환경에서 실험을 진행했다. 차광처리는 차광막을 사용하여 4가지 처리(0%, 55%, 75%, 95%)로 구성하였 다. 토양수분센서를 이용하여 자동 관수로 진행되었고 환경 데이터 또한 수집하였다. 실험 기간 동안 토양 수분은 비가 오면 일시적으로 높아졌지만 자동 관수 시스템 하에서 대체적 으로 목표 토양 수분을 유지하였다. 섬꼬리풀은 차광이 없는 조건에서 엽수와 건물중이 유의하게 높은 값으로 나타났으며, 엽록소 형광에서는 무차광에서 모든 처리구보다 가장 낮은 값 을 나타냈으며, 차광처리구의 경우 무차광과는 유의한 차이가 나타났으나 차광처리간의 차이는 나타나지 않았다. 큰구와꼬 리풀은 55%차광 조건에서 가장 양호한 생장을 나타냈다.

Recently, a lots of studies have been conducted to imitate real meat with the factors including texture, aroma, taste, and color of meat analogues. Since the color component of meat is diverse and complex, as well as large of degree of change according to cooking, the color imitating has been still challenging. In this study, we selected up a representative meat analogue (tteok-galbi), tracked the color change at three making points as steps of batter, steaming, and cooking. In order to realize the color at these points, three plant-based natural pigments including prickly pear cactus, sweet pumpkin, and mugwort were selected, and the color with optimized ratio was applied to the tteok-galbi. As a result, it was found that 1:3:1 in the batter, 2:1:2 in steaming, and 2:1:2 in cooking were optimal ratios. The results in this study were significant in that it could apply the colors to meat analogues according to the combination of natural pigments derived from plants.

포인세티아(Euphorbia pulcherrima Willd. Ex Klotzch) ‘Flame’ 은 국립원예특작과학원에서 2015년에 육성한 품종이다. ‘Flame’ 은 단일감응기간이 짧은 적색 포엽의 깊은 열편을 가진 ‘Eckalba’ 와 밝은 적색의 포엽을 가진 국내 육성 품종 ‘Candle Light’를 2013년에 교배하여 획득한 실생 계통을 선발 육성하였다. 2014 년부터 2015년까지 생육 및 개화 특성, 균일성에 대하여 1, 2차 특성검정을 실시하였으며, 2015년에 3차 특성검정을 실시하여 최종선발한 후 직무육성품종심의회에 상정하여 ‘Flame’으로 명명하였다. ‘Flame’ 품종의 포엽은 밝은 적색을 띠며 열편이 깊다. 초장과 초폭은 중간이나 적심하지 않아도 많은 분지가 발생하여 풍성한 수형을 이룬다. 단일처리후 약 7.5주가 경과하면 완전히 착색되어 출하가 가능하다. 이 품종은 2018년 1월 24일에 국립 종자원에 품종등록(등록번호 6921호)되었다.

농촌진흥청 국립원예특작과학원에서는 2017년에 절화 수명이 길고 수량이 많은 연한 핑크색의 스프레이 장미 ‘Pink Shine’ 을 육성하였다. 모본은 ‘Fire Flash’로 붉은 복색의 스프레이 장미이며, 부본은 ‘Pink Charm’으로 핑크색이며 흰가루병에 강하다. 이 두 품종을 2012년 인공교배하여 이듬해인 2013년 1월에 파종, 9cm 포트 묘에 정식하여 관능 평가 실시 후 도태시켜 39개체 의 실생을 얻었다. 이후 화형, 화색, 꽃잎 수, 절화수량, 병 저항성 등을 고려하여 2015년까지 5개체를 선발하여 유사 품종인 ‘Missha’를 대조로 하여 2017년까지 3차에 걸친 특성 검정을 실시하였다. 그 결과 가장 우수한 ‘원교 D1-325’를 최종선발하여 ‘Pink Shine’으로 명명 후 2018년 3월 22일 품종보호출원(제 2018-212호)하여 2019년 6월 21일에 품종보호권(제7786호)이 등록되었다. 화색은 연한 핑크색(RHS, R36D)이며 잎의 색은 녹색(RHS, G137A)으로 대조 품종 ‘Missha’와 동일하였다. 꽃잎 수는 67.8개, 화폭 5.4cm, 화고 3.2cm로 ‘Missha’보다 컸으며 평방미터당 연간 절화수량은 131본, 절화수명은 15.3일로 ‘Missha’ 보다 우수하였다.

Hepatic stellate cells (HSCs) play essential roles in normal and pathophysiological function in liver. In steady state, HSCs contribute to retinoid storage, immune tolerance, and extracellular matrix (ECM) homeostasis. Upon liver injury, they become activated and lead to morphological and functional changes. Studies have demonstrated that activation of HSCs by various stimuli such as toxins, microbial infection, or metabolic overload can promote the fibrotic changes in liver by production of ECM. Herein, we provide current knowledge about the basic characteristics of HSCs and the mechanism by which they are activated.

Two different casting speeds of 60 and 80mm/min are adopted to determine the effect of casting speed on the microstructure and mechanical properties of Al-Mg-Si/Al hybrid material prepared by duo-casting. The obtained hybrid material has a uniform and straight macro-interface between the pure Al side and the Al-Mg-Si alloy side at both casting speeds. When the casting speed is increased to 80mm/min, the size of primary α phases in Al-Mg-Si alloy decreases, without change of shape. Although the Al-Mg-Si alloy produced at higher casting speed of 80mm/min shows much higher ultimate tensile strength (UTS) and 0.2 % proof stress and lower elongation, along with higher bending strength compared to the case of the 60mm/min in casting speed, the tensile properties and bending strength of the hybrid material, which are similar to those of pure Al, are the same regardless of the increase of casting speed. Despite the different casting speeds, deformation and fracturing in hybrid materials are observed only on the pure Al side. This indicates that the macro-interface is well-bonded, allowing it to endure tensile and bending deformation in all hybrid materials.

In this study, three kinds of metal chills such as SS400, AC4CH and brass, with different thicknesses of 40 ~ 80 mm, were applied for low pressure casting of Al-Si alloy to control cooling rate. The microstructural characteristics with increasing cooling rate were represented using factors including D1, D2, size of primary α phases and shape factor and size of eutectic Si. The tensile properties were investigated and additionally analyzed based on the microstructural characteristics. As the cooling rate increased, D1, D2, and sizes of primary α phases and eutectic Si apparently decreased and the shape factor of eutectic Si increased to over 0.8. The ultimate tensile strength (UTS) and yield strength (YS) increased with decreasing D1, D2, and size of primary α phases, while elongation increased with decreasing size of eutectic Si and concurrently increasing shape factor of eutectic Si. This indicated that the primary α phases and eutectic Si in Al-Si alloy were refined with increasing cooling rate, resulting in improvement of UTS and YS without sacrificing elongation. After the tensile test, preferential deformation of primary α phases was observed in the Al-Si alloy produced at higher cooling rates of more than 0.1 K/s.

Clear cell odontogenic carcinoma (CCOC), a very rare neoplasm located mostly in the mandible, has been regarded as a benign tumor. However, due to the accumulation of case reports, CCOC has been reclassified as a malignant entity by the World Health Organization. Patients with CCOC present with regional swelling and periodontal indications with variable pain, often remaining misdiagnosed for a long period. CCOC has slow growth but aggressive behavior, requiring radical resection. Histologic analysis revealed the monophasic, biphasic, and ameloblastic types of CCOC with clear cells and a mixed combination of polygonal and palisading cells. At the molecular level, CCOC shows the expression of cytokeratin and epithelial membrane antigen, along with markers that assign CCOC to the sarcoma family. At the genetic level, Ewing sarcoma breakpoint region 1-activating transcription factor 1 fusion is regarded as the key feature for identification. Nevertheless, the scarcity of cases and dependence on histological data delay the development of an efficient therapy. Regarding the high recurrence rate and the potential of distant metastasis, further characterization of CCOC is necessary for an early and accurate diagnosis.

South Korea has over 0.38 million of managed honey bee (Apis cerana) colonies before 2009 years ago, which produce the highest quantity of honey in the Korea; however, almost colony (90%) were collapsed by Korean Sacbrood Virus (KSBV) in South Korea. Korean Sacbrood Virus (KSBV) is the pathogen of A. cerana Sacbrood disease, which poses a serious threat to honeybee A. cerana, and tends to cause bee colony and even the whole apiary collapse. Colony collapse of A. cerana was first reported on the Pyeong-Chang of the South Korea in 2009. Several scientists and governments has been tried research for cure the sacbrood disease in A. cerana colony by medicines and management techniques. Unfortunately, The sacbrood disease dosen’t improve. So, we were developed a better breed of A. cerana for resistance of sacbrood virus by selection and then artificial insemination. A. cerana breeding technique was first successful applied with A. cerana in Korean. Queens was grafted from sacbrood resistance line and then it was growing in sacbrood disease colony that was survived 100%. Altogether selected 18 queens were artificially inseminated and 2,000 drones of A. cerana in Korea was used to evaluate amount of semen collection. We are select two scabrood resistance A. cerana line (R and H). R line be used for rearing the Queen. Drone was reared in H line colony. The RH hybrid were not infected sacbrood virus even spread sacbrood virus (2×106). RH colonies have very excellent hygienic behavior, brood, and sacbrood disease resistance activity.

In order to investigate novel insect growth regulators (IGRs) from actinomycetes, 363 isolates of actinomycetes were tested for their IGR activities. Among them, Streptomyces sp. AN120537 showed the highest juvenile hormone antagonist (JHAN) activity and significant insecticidal activities against larvae of Aedes albopictus and Plutella xylostella. In addition, the dead larvae showed morphological deformities such as contraction of body segments or pigmentation of all body parts. Through liquid chromatography and bioassay-guided fractionation, 7 IGR compounds were identified from the crude hexane extract of AN120537. These results suggested that Streptomyces sp. AN120537 could be useful resources for development of eco-friendly insecticidal agents.