대벌레(Ramulus mikado)는 1990년 이후부터 2000년대 초반까지 경북을 중심으로 대발생을 하였던 돌발 해충 으로 2020~2023년에 수도권에서 대발생 사례가 다수 보고 되었다. 대벌레의 대발생 원인으로 기후변화가 지목되 고 있지만, 대벌레 개체군과 생물적·비생물적 환경 조건과의 관계를 이해하기 위한 연구는 매우 부족한 실정이 다. 본 연구에서는 주요 기주식물과 대벌레 발생 양상에 대한 관계를 이해하고자 수행하였다. 2022년부터 2023년 까지 대벌레 대발생 지역 중 하나인 청계산 일대 등산로를 따라 조사구를 선정한 뒤 주요 기주식물이자 우점종인 신갈나무, 아까시나무, 잔털벚나무를 대상으로 대벌레의 발생 밀도를 조사하였다. 그 결과, 조사지점 간의 대벌 레 평균 밀도는 유의한 차이가 발견되지 않았지만, 기주식물에 따른 밀도의 차이는 뚜렷하게 나타났다.

In 2020, severe defoliation was reported in Abies holophylla plantations located in Hwacheon-gun, Gangwon-do. This damage was attributed to an outbreak of an unidentified sawfly species from the genus Cephalcia (Hymenoptera: Pamphiliidae). The larvae of this sawfly caused significant defoliation of the leaves. This pest has been identified as Cephalcia koreana Park & Jung, sp. nov., described as a new species in 2023. To investigate the occurrence pattern and density of C. koreana, we set up emergence traps and analyzed samples from affected branches. Our results showed that the density peaks for adults, eggs, and larvae were in mid-May, late May, and early June of 2021, respectively. However, their density decreased sharply after a notably cold spring period in 2022. Here, I aim to discuss the outbreaks of insect pests and their population dynamics.

Honey bees are crucial pollinators for agricultural and natural ecosystems, but are experiencing heavy mortality in Korea due to a complex suite of factors. Extreme winter losses of honey bee colonies are a major threat to beekeeping but the combinations of factors underlying colony loss remain debatable. Finding solutions involves knowing the factors associated with high loss rates. To investigate whether loss rates are related to Varroa control and climate condition, we surveyed beekeepers in korea after wintering (2021–2022 to 2022–2023). The results show an average colony loss rate of 46%(2022) and 17%(2023), but over 40% colony loss before wintering at 2022. Beekeepers attempt to manage their honey bee colonies in ways that optimize colony health. Disentangling the impact of management from other variables affecting colony health is complicated by the diversity of practices used and difficulties handling typically complex and incomplete observational datasets. We propose a method to 1) Varroa mite population Control by several methods , and 2) Many nursing bee put in hive before wintering.

This study was aimed to isolate bacterial inoculants producing chitinase and evaluate their application effects on corn silage. Four corn silages were collected from four beef cattle farms to serve as the sources of bacterial inoculants. All isolates were tested against Fusarium graminearum head blight fungus MHGNU F132 to confirm their antifungal effects. The enzyme activities (carboxylesterase and chitinase) were also measured to isolate the bacterial inoculant. Based on the activities of anti-head blight fungus, carboxylesterase, and chitinase, L. buchneri L11-1 and L. paracasei L9-3 were subjected to silage production. Corn forage (cv. Gwangpyeongok) was ensiled into a 10 L mini silo (5 kg) in quadruplication for 90 days. A 2 × 2 factorial design consists of F. graminearum contamination at 1.0104 cfu/g (UCT (no contamination) vs. CT (contamination)) and inoculant application at 2.1 × 105 cfu/g (CON (no inoculant) vs. INO (inoculant)) used in this study. After 90 days of ensiling, the contents of CP, NDF, and ADF increased (p<0.05) by F. graminearum contamination, while IVDMD, acetate, and aerobic stability decreased (p<0.05). Meanwhile, aerobic stability decreased (p<0.05) by inoculant application. There were interaction effects (p<0.05) on IVNDFD, NH3-N, LAB, and yeast, which were highest in UCT-INO, UCT-CON, CT-INO, and CT-CON & INO, respectively. In conclusion, this study found that mold contamination could negatively impact silage quality, but isolated inoculants had limited effects on IVNDFD and yeast.

This study was conducted to assess the genetic variability and correlation of phenotypic characteristics in 12 tomato (Solanum lycopersicum L.) genotypes including 11 WorldVeg and one commercial variety (Pusa Ruby) in Terai (plain) region of Nepal in 2021–2022. This experiment was laid out in a randomized complete block design with three replications. The phenotypic traits, including days to 50% flowering, plant vigor and height, fruit number/plant, fruit yield, fruit weight and diameter, fruit firmness and fruit pericarp thickness, and total soluble solids (TSS) content of the fruits, were studied. Analysis of variance revealed significant differences among the genotypes for all the traits except for plant vigor. The genotype of AVTO1705 resulted the highest fruit yield (2.9 kg/plant) than Pusa Ruby, a commercial check (0.5 kg/plant). The phenotypic coefficient of variation (PCV) was higher than the genotypic coefficient of variation (GCV) for all the traits and PCV values were maximum for the number of fruits, fruit yield, and fruit weight. High PCV, GCV, and genetic advance (GA) were observed for yield, fruit weight, and plant height, respectively, indicating the additive gene effect. High heritability for fruit yield/plant and plant height inferred the phenotypic selection for their genetic improvement. Fruit yield was significantly (P<0.05) positively correlated with the fruit number and fruit weight, and direct selection of these traits are reliable for yield improvement in tomato.

Buckwheat (Fagopyrum esculentum), which is a traditional Korean crop, has been known as a health food due to its rich nutrition. This study was conducted to evaluate the change in flavonoid content of flowers and seeds during post-flowering growth of Korean tartary buckwheat variety ‘Hwanggeummiso’, with the aim of providing basic data for the development of functional food and feed additive. Tartary buckwheat took 69 and 99 days from the sowing date to reach the flowering and maturity stages, respectively. As a result of examining the flavonoid components of each part of tartary buckwheat, chlorogenic acid, rutin, and isoquercitrin of flowers increased from the flowering period on 22 May (0 days after flowering) to 42 days after flowering, while quercetin increased until 21 days after flowering and then decreased thereafter. In seeds, chlorogenic acid, rutin, and isoquercitrin were most abundant at the time of seed-bearing on 14 days after flowering, and showed a decreasing tendency thereafter. On the other hand, quercetin showed a tendency to increase until 21 days after flowering and then decrease. Overall, the flavonoid content was higher in flowers than in seeds, with rutin being particularly prominent. Based on this, the possibility as food materials and feed additives was confirmed using buckwheat produced in Korea.

Cordycepin (3'-deoxyadenosine) is a nucleoside analog known for its diverse range of biological activities. This study investigated the effect of different types of sawdust on the production of the bioactive compound cordycepin. The results of the study showed that different types of wood sawdust affected the biosynthesis of cordycepin and a significant increase was observed when the conventional SDB medium was replaced with 1% NaOH treated pine sawdust. To optimize cordycepin production from Paecilomyces tenuipes in a medium containing 1% NaOH-pretreated pine sawdust, we employed Response Surface Methodology (RSM) in its Box-Behnken design (BBD) canonical form. The optimal conditions were determined as follows: a particle size of 109.5111-mesh (140 m) for 1% NaOH-pretreated pine sawdust, an input weight of 21.1679 g/L, and an incubation time of 73.8423 hours. According to our model, this combination is expected to yield a maximum cordycepin content of 896.1428 g/mL. Experimental validation of this prediction was performed using the suggested optimal conditions, resulting in an average cordycepin content of 922.6771 g/mL across three replicates, thus confirming the model's accuracy.

In recent years, young Chinese consumers have become more favorably inclined toward products relating to traditional culture. Therefore, this study aimed to develop a textile design that incorporates traditional Chinese patterns and cultural symbolism that will appeal to consumers from the MZ generation (millennials and Generation Z). Through a literature search for traditional Chinese patterns and symbols regarded as auspicious, our design concept and motives were established. We selected peony, lotus, and frog motifs as representative of a “wealth and eternal prosperity” design theme. In textile design work 1, we used hand drawing and watercolor techniques, color transformation with Adobe Photoshop, and colorway and end-use 3D simulation with TexPro. The 3D simulation work suggests that this textile pattern is suitable for women’s outerwear, mufflers, and tote bags. Textile design work 2 conveyed the ‘wealth and eternal prosperity’ design theme and had a graceful mood that embodied the nobility of the lotus flower whilst also encompassing the symbolism of money and status. The end design is a modern reinterpretation of traditional Chinese patterns and motifs. As such, it is hoped that it will satisfy the needs of young consumers for cultural values yet offer a unique new aesthetic distinct from existing textile designs. These qualities can be expected to enhance the competitive market value of textiles bearing this design.

As the importance of online virtual spaces increases due to COVID-19, interest in online virtual spaces using 4th industrial technology is increasing. Accordingly, the metaverse that combines virtual and real is becoming an issue. In the fashion industry, marketing using online is gradually increasing, and various attempts are being made by converging with the metaverse to provide new and enjoyable experiences to customers. This study looked at the impact of customer experience of a luxury fashion brand pop-up store on customer satisfaction, affective commitment and brand loyalty in a metaverse environment where utilization is increasing due to COVID-19 and technological development. For the analysis data of this study, a survey was conducted on the users who experienced the metaverse platform Zepeto's ' BVLGARI World'. As a result of examining the effect of the customer experience of a luxury fashion brand pop-up store on customer satisfaction, affective commitment, and brand loyalty in a metaverse environment, some of the customer experiences affect customer satisfaction, and the proposed hypothesis was partially accepted. In addition, it was confirmed that customer satisfaction affects affective commitment and brand loyalty, and affective commitment affects brand loyalty. In this study, we examine the impact of the customer experience of a luxury fashion brand pop-up store on customer satisfaction, affective commitment, and brand loyalty in the metaverse environment, and identify what is needed for more active convergence and activation of the metaverse and fashion brands. Also, we provide practical implications to people who involved in the metaverse and the fashion industry.

With the infusion of advanced technology, interactions between customers and firms’ representatives take place in brick-and-mortar stores, 2D online sites, and even 3D metaverse environments. In the metaverse, a firm’s sales avatars interact with other users while representing the firm, recommend, and sell virtual items. Previous literature about the effectiveness of sales representatives agrees that a firm representatives’ smiling faces engender customer satisfaction and better interactions. However, it is unclear whether smiling faces of sales avatars will work the same way in the metaverse as they do in the real world. The current research examines whether a firm’s sales avatars with sad facial expression (vs. those with smiling facial expression) stimulate higher user intentions to interact with firm representative avatars, to purchase virtual items from the representative avatars, and to spread positive WOM about their experience in the metaverse. Moreover, focusing on subcultural appeal, we investigate why this unconventional phenomenon happens in the metaverse unlike in real world. We conducted two experiments to manipulate a firm representative avatar’s facial expression (smiling vs. sad) in the metaverse. We newly designed a metaverse place, and participants who put on a virtual reality headset are exposed to either a hat (Experiment 1) or shoes (Experiment 2) store where they can purchase a virtual hat or shoes. Experiments 1 and 2 basically tested the same things repeatedly. However, to improve internal validity and generalizability, Experiment 2 used human-like sales avatars instead of cartoon character-like sales avatars in Experiment 1, changed virtual stores from a hat store to shoes store, and finally controlled for various extraneous variables such as attractiveness, warmth, and competence of sales avatars, and user’s previous experience about metaverse. Sales representatives with a smile are believed to contribute to beneficial consumers’ attitudes and behaviors in offline stores. However, our experiments demonstrate that this well-received belief does not necessarily apply in the metaverse, where subcultural appeal plays a more critical role. In the metaverse, users evaluate sales avatars with sad facial expression (vs. with smiling facial expression) as more unique and cool (i.e., higher subcultural appeal), leading to their higher intention to interact with the sad sales avatar, to purchase a virtual item, and to spread positive WOM about their experiences. Our results imply that previous findings supported in the offline or 2D online sites may not work the same way in the 3D metaverse.

Large amounts of waste and wastewater from aquaculture have negatively impacted ecosystems. Among them, shrimp aquaculture wastewater contains large amounts of nitrogen contaminants derived from feed residues in an aerobic environment. This study isolated candidate strains from adult rockworms to treat shrimp aquaculture wastewater (SAW) in an aerobic environment. Among 87 strains isolated, 25 grew well at the same temperature as the shrimp aquaculture with excellent polymer degradation ability (>0.5 cm clear zone). Six isolates (strains AL1, AL4, AL5, AL6, LA10, and PR15) were finally selected after combining strains with excellent polymer degradation ability without antagonism. 16S rRNA sequencing analysis revealed that strains AL1, AL4, AL5, AL6, LA10, and PR15 were closely related to Bacillus paramycoides, Bacillus pumilus, Stenotrophomonas rhizophila, Bacillus paranthracis, Bacillus paranthracis, and Micrococcus luteus, respectively. When these six isolates were applied to SAW, they reached a maximum cell viability of 2.06×105 CFU mL-1. Their chemical oxygen demand (CODCr) and total nitrogen (TN) removal rates for 12 h were 51.0% and 44.6%, respectively, when the CODCr/TN ratio was approximately 10.0. Considering these removal rates achieved in this study under batch conditions, these six isolates could be used for aerobic denitrification. Consequently, these six isolates from rockworms are good candidates that can be applied to the field of aquaculture wastewater treatment.

Cordyceps militaris (C. militaris) is a unique and valuable medicinal fungus belonging to the Cordyceps species. C. militaris is the only fungus that contains cordycepin which is a biologically active compound. In previous studies, light-emitting diodes (LEDs) are known to be effective in increasing cordycepin content, but metabolic profiling of LED-stimulated C. militaris has not been confirmed. Metabolic profiling is essential to understanding the metabolic regulation of cordycepin. This study studied the physiologically active secondary metabolites of C. militaris according to the presence or absence of stimulation of LEDs through GC-MS analysis. Most of the metabolites were detected in both samples, but there was a clear difference in the detected concentration. In particular, C. militaris had a significant difference in amino acid levels when stimulated with LEDs. Our results suggested that LEDs could stimulate amino acid synthesis in C. militaris mycelium to increase the cordycepin content.

Toll-like receptor 4 (TLR4) is known to contribute to the modulation of insulin resistance and systemic inflammation seen in obesity and the metabolic syndrome. The present study was performed to investigate the fertility competence of TLR4 knock out male mice (TLR4 mice) on a high-fat diet (HFD), compared to a normal-chow diet (NCD). The controls included wildtype (WT) mice fed on a HFD or NCD. Six-week-old male mice were fed with either a NCD or HFD for 20 weeks. Body and organ weights, serum levels of glucose, triglycerides and hepatoxicity, sperm quality and spermatogenesis were observed after the sacrifice. Also, randomly selected male mice were mated with virgin female mice after feeding of 19 weeks. The weight of the body and organs increased in WT and TLR4 mice on a HFD compared to those of mice on a NCD. The weights of the reproductive organs did not vary among the treatment groups. The motility and concentration of the epididymal spermatozoa decreased in both WT and TLR4 mice fed a HFD. The pregnancy rate and litter size declined in the HFD-fed WT mice compared to the HFD-fed TLR4 mice. In conclusion, the HFD alters energy and steroid metabolism in mice, which may lead to male reproductive disorders. However, fertility competence was somewhat restored in HFD-fed TLR4 male mice, suggesting that the TLR4 is involved in testis dysfunction due to metabolic imbalance.

Roridin E, a constituent of Podostroma cornu-damae, has excellent medicinal properties and exhibits powerful anticancer effects. However, being a poisonous mushroom, P. cornu-damae is difficult to find in its natural environment. Therefore, only a limited amount of roridin E is isolated from P. cornu-damae. We isolated roridin E from mycelial culture medium of P. cornu-damae and examined its effects on five breast cancer cell lines. The purity of the isolated roridin E was 96%. It exhibited anticancer effects on all five breast cancer cell lines, with an IC50 of at least 0.0006 mg/L. To the best of our knowledge, this is the first report on the investigation of effects of roridin E isolated from the mycelium of P. cornu-damae mushrooms on five breast cancer cell lines. However, safety issues should be investigated and addressed in future studies before roridin E is used in clinical settings.

The 2007 Recommendation of the International Commission on Radiological Protection recommended the application of dose constraints to optimize radiation protection to resolve the inequity of exposure among radiation workers. The average annual occupational doses in Korean nuclear power plants (NPPs) are 0.3-0.8 mSv. These doses are much lower than the annual effective dose limit of 50 mSv for radiation workers stipulated by the Nuclear Safety Act. In addition, most NPP workers received less than 0.1 mSv per year. These doses are lower than the average annual occupational doses of 0.3- 0.8 mSv. Korean regulatory body conducted the study to legislate the dose constraints in the Korean regulatory system and determine dose constraints (draft) for radiation workers. The legislation of dose constraints would not greatly affect the radiation protection programs in Korean NPPs because most workers received very low doses. However, some workers received relatively higher doses than others. This study analyzed the occupational exposure conditions, such as exposure type and situation, in Korean NPPs. This study investigated the internal and external radiation doses and the radiation doses depending on the NPP operating conditions, including normal operation, planned maintenance, and intermediate maintenance, for the last ten years (2012-2021). As a result, most NPP workers received external exposure rather than internal exposure. Furthermore, most radiation exposures occurred during the planned maintenance period. The results of this study can be used for optimizing occupational doses in Korean NPPs.

The site used for a nuclear facility can be released after decommissioning if the results of dose estimation meet the regulatory requirements and the site release is approved by the regulatory body. RESRAD-ONSITE, developed by the Argonne National Laboratory, is a computer code used to estimate the dose to the residents on radiologically contaminated sites. The dose estimation for site release should consider various exposure pathways, including inhalation, ingestion, and external exposure. This study used RESRAD-ONSITE to evaluate the internal exposure dose and identify radionuclides due to the intake of food produced on radiologically contaminated sites. The upper limit of the clearance level of radionuclides expected to remain at the site was used as the source terms for the dose evaluation. In addition, the amount of food intake per capita was obtained from eight countries using nuclear power generation as of 2020. The default values of RESRAD were used for other parameters except for intake by type of food and source terms. As a result of the dose evaluation, the contaminated water and vegetables showed a great contribution to the exposure dose. The dose due to tritium in drinking water was highest in the third year. In addition, regarding the intake of vegetables, the internal exposure due to 90Sr was the highest in the first year.

In the event of a radioactive release, it is essential to quickly detect and locate the source of the release, as well as track the movement of the plume to assess the potential impact on public health and safety. Fixed monitoring posts are limited in their ability to provide a complete picture of the radiation distribution, and the information they provide may not be available in real-time. This is why other types of monitoring systems, such as mobile monitoring, aerial monitoring, and personal dosimeters, are also used in emergency situations to complement the information provided by fixed monitoring posts. Also, the monitoring system can be improved by using the Kriging technique, which is one of the interpolation methods, to predict the radiation dose in the relevant districts. This can be achieved by utilizing both the GPS information and the radiation dose measured at a particular point. The Kriging method involves estimating the value between different measurement points by considering the distance between them. The model used GPS and radiation data that were measured around the Hanbit NPP. The data were collected using a radiation measuring detector on a bus that traveled around the NPP area at 2-second intervals for one day. From the collected data, 200 data points were randomly selected for analysis, excluding the data measured at the bus garage out of a total of 16,550 data points. The average dose of the daily measurement data was 117.94 nSv/h, and the average dose of the 200 randomly extracted data was 119.17 nSv/h. The GPS and radiation dose data were utilized to predict the radiation dose around the Yeonggwang area where the Hanbit NPP is located. In the event of an abnormal release of radioactive material, it can be difficult to accurately determine the dose unless a monitoring measurement point is present. This can delay the rapid evacuation of residents during an emergency situation. By utilizing the Kriging model to make predictions, it is anticipated that more accurate dose predictions can be generated, particularly during accident scenarios. This can aid in the development of appropriate resident protection measures.

As of 2023, there are a total of 24 nuclear power plants (NPPs) in operation in Korea, with 21 pressurized water reactors (PWRs) and three pressurized heavy water reactors (PHWRs). Korean NPPs discharge radioactive effluents into the environment every year. Radioactive effluents from NPPs contain various radionuclides and materials, including 3H, 14C, Noble gas, particulates, and iodine Among the radioactive effluents discharged from Korean NPPs, 14C is a pure beta emitter with a half-life of 5,730 years. The human body can inhale and ingest 14C to cause internal exposure. In addition, the amount of 14C present in the environment is decreasing, but the amount of 14C discharged from NPPs is increasing. 14C discharged to the environment can be inhaled and ingested by the public around NPPs through various pathways. For this reason, it is very important to monitor and manage 14C because it affects the dose of the public around NPPs. Therefore, this study compared and analyzed the average emissions of 14C discharged from PWRs and PHWRs during the recent 10 years (2012-2021). An average of the public dose due to 14C released from NPPs depending on the reactor types from 2012 to 2021 was also compared. It is inevitable to discharge radioactive effluents while operating NPPs. Korea Hydro & Nuclear Power (KHNP) manages and monitors radioactive effluents released into the environment. According to a survey and analysis of 14C discharged from PWRs and PHWRs and the average dose of the public over the recent 10-year (2012-2021) around Korean NPPs, 14C released from PWR accounted for 3.1% of the total discharge but accounted for more than 93.67% of the total public dose. In addition, 14C discharged from PHWRs accounted for 1.12% of the total discharge, but its resulting dose to the public accounted for more than 83.87% of the total public dose. As a result of analyzing the public dose due to 14C from 2012 to 2021, it was gradually increasing every year. Based on these results, monitoring and managing 14C discharge and its resulting doses to the public are important in the future.

After the Fukushima nuclear accident in Japan in March 2011, many Koreans were concerned that products exposed to radioactive materials released from the nuclear power plant would be imported into Korea. Systematic radiation monitoring was required for food and daily necessities imported from the nuclear accident area. The need for a legal system to support systematic radiation monitoring was also demanded. The Act on Protective Action Guidelines against Radiation in the Natural Environment was enacted to resolve concerns regarding environmental radiation in Korea in July 2011. According to this law, radiation monitoring equipment has been installed and operated at major airports and ports nationwide. This paper aims to review the radiation monitoring system of the Korean government comprehensively. The legal system and the legal basis for radiation monitoring of imported cargo conducted by each department were investigated by analyzing the laws and regulations of radiation monitoring for the relevant cargo items. In addition, the current status of radiation monitoring by the government departments was examined to determine how radiation monitoring for imported cargo is performed within the legal system. The investigation of the current radiation monitoring system for imported cargo in Korea confirmed that radiation monitoring is conducted by classifying cargo items under the jurisdiction of each government department for all imported cargo. However, the reduction in efficiency of radiation monitoring of imported cargoes, unclear legal grounds for radiation monitoring of imported cargo by some departments, the occurrence of overlapping inspections by departments, and the difficult process of issuing the radiation test certificate required for customs clearance by the Korea Customs Service were also identified. As a result of the analysis, it was found that the current radiation monitoring system for imported cargo in Korea ought to be improved, taking into account efficiency, overlapping inspection, legal background, and the difficult process of issuing the certificates.