The electroconvection generated on the surface of an ion exchange membrane (IEM) is closely related to the electrical/ chemical characteristics or topology of the IEM. In particular, when non-conductive regions are mixed on the surface of the IEM, it can have a great influence on the transfer of ions and the formation of nonlinear electroconvective vortices, so more theoretical and experimental studies are necessary. Here, we present a novel method for creating microscale non-conductive patterns on the IEM surface by laser ablation, and successfully visualize microscale vortices on the surface modified IEM. Microscale (~300 μm) patterns were fabricated by applying UV nanosecond laser processing to the non-conductive film, and were transferred to the surface of the IEM. In addition, UV nanosecond laser process parameters were investigated for obvious micro-pattern production, and operating conditions were optimized, such as minimizing the heat-affected zone. Through this study, we found that non-conductive patterns on the IEM surface could affect the generation and growth of electroconvective vortices. The experimental results provided in our study are expected to be a good reference for research related to the surface modification of IEMs, and are expected to be helpful for new engineering applications of electroconvective vortices using a non-conductive patterned IEM.

The electromembrane process, which has advantages such as scalability, sustainability, and eco-friendliness, is used in renewable energy fields such as fuel cells and reverse electrodialysis power generation. Most of the research to visualize the internal flow in the electromembrane process has mainly been conducted on heterogeneous ion exchange membranes, because of the non-uniform swelling characteristics of the homogeneous membrane. In this study, we successfully visualize the electroconvective vortices near the Nafion homogeneous membrane in PDMS-based microfluidic devices. To reinforce the mechanical rigidity and minimize the non-uniform swelling characteristics of the homogeneous membrane, a newly developed swelling supporter was additionally adapted to the Nafion membrane. Thus, a clear image of electroconvective vortices near the Nafion membrane could be obtained and visualized. As a result, we observed that the heterogeneous membrane has relatively stronger electroconvective vortices compared to the Nafion homogeneous membranes. Regarding electrical response, the Nafion membrane has a higher limiting current and less overlimiting current compared to the heterogeneous membrane. Based on our visualization, it is assumed that the heterogeneous membrane has more activated electroconvective vortices, which lower electrical resistance in the overlimiting current regime. We anticipate that this work can contribute to the fundamental understanding of the ion transport characteristics depending on the homogeneity of ion exchange membranes.

동계작물인 보리를 재배한 후 하계작물인 수수, 기장 및 피를 대상으로 하여 조사료 생산량과 그에 따른 사료가치를 분석하여 보리와 적합한 하계작물의 최적의 작물조합을 선정하기 위하여 실시한 결과 다음과 같다. 1. 초장은 하계작물 모두 1차 및 2차 수확할 때보다 호숙기가 가장 컸으며, 수확시기에 따른 수분 함량은 1차 수확할 때 가장 높았고 호숙기에 수확할 때 가장 낮은 함량을 보였다. 2. 보리의 건물수량은 10 a 당 1,343 kg였으며 보리와 하계 작물를 작부체계에 따른 건물수량은 수수의 경우 1차 및 2차 수확보다 호숙기에 수확할 때 10,018 kg으로 가장 많았으며, 기장과 피 역시 출수기와 재생 후 수확 시 보다 호숙기에 수확할 때 건물수량이 더 많았다. 3. ADF 함량은 수수는 1차 및 2차 수확 시 보다 호숙기 때가 낮았지만 기장과 피는 호숙기가 더 높은 ADF 함량을 보였다. NDF 함량은 3작물 모두 1차 및 2차 수확 시 보다 호숙기에 더 많은 함량을 보였으며, 조단백질 함량은 1차 및 2차 수확할 때가 호숙기에 수확할 때보다 함량이 더 높았다. 4. 건물 수량에 대한 조단백질 총생산량은 수수의 경우 1차 및 2차 수확할 때보다 호숙기에 수확할 때 약 761 kg으로 가장 많았으며, 기장과 피는 출수기와 재생 후 수확 할 때가 호숙기 보다 상대적으로 높은 함량을 보였다. 5. 가소화양분총량은 3작물 모두 수확시기에 따른 함량 차이는 보이지 않았다.

광범위큰 B세포 림프종은 비호지킨림프종의 대표적인 아형으로 공격적 림프종이며 원발성으로 담낭에 발생한 림프 종은 일부 증례를 통한 보고가 있지만, 담낭에 단독 재발한 광범위큰 B세포 림프종은 국내에서 보고된 바가 없다. 본 증례는 상복부의 통증과 황달의 임상증상 및 복부컴퓨터단층 촬영 그리고 양전자 방출 단층촬영에서 만성 담낭염과 담낭 암으로 추정하여 수술 후 조직검사를 통해 재발한 광범위큰 B세포 림프종으로 진단할 수 있었다. 저자들은 과거 회장에 발생한 광범위큰 B세포 림프종으로 치료를 시행하여 완전완 화가 유도된 이후 다른 장기 혹은 림프절 전이 없이 단독으로 담낭에 재발한 광범위큰 B세포 림프종 1예를 경험하였기에 문헌 고찰과 함께 보고하는 바이다.

본 논문은 넓은 보의 전단강도를 대상으로 한 실험적 평가에 대해 기술하였다. 본 논문의 실험을 통해 넓은 보에 횡방향 단면에서 GFRP 판의 보강개수와 종방향 전단보강 간격, 그리고 유효깊이가 전단강도에 끼치는 영향에 관하여 연구하였다. 총 7개의 시험체에 유공형 GFRP 판 형태로 전단보강재를 보강하여 전단성능 실험을 실시하였다. 본 논문에 기재된 전단보강재는 유공형 판 형태로 제작되어 타설 시 콘크리트의 유동성을 증가시켜 보강재와 콘크리트의 부착력을 향상시켰다. 7개 시험체의 주 변수로는 전단보강재의 횡방향 단면에 대한 판의 보강개수와 종방향 전단보강 간격, 그리고 유효깊이로 정하였다. 시험체의 균열 및 파괴 양상, 변형률과 전단강도비를 분석하였다. GFRP판으로 전단보강된 넓은 보의 전단강도는 ACI 318-11 기준으로 산정되었다. 실험의 결과를 통해 유공형 GFRP 판이 전단보강재로서 넓은 보에 효과적으로 적용됨을 확인하였다.

댐과 보의 건설로 인한 하천의 단절 및 어류의 이동 문제를 해결하기 위해 다수의 어도를 건설하고 있다. 하지만 이에 대한 어도 효율성 평가나 적합성에 대한 연구는 상당히 제한적으로 이루어지고 있다. 따라서 본 연구는 2012년 6월부터 10월까지 매달 1회씩 trap을 이용하여 공주보에 설치된 아이스하버식 어도에서 시기별, 시간대별, 어도 위치별 어도 이용 차이를 분석하였다. 연구 결과, 6~8월보다 9~10월에 어도를 이용하는 종 및 개체가 감소하였다. 그리고 어도 좌안 측면이 통계적으로 유의하지 않지만 많은 종 및 개체가 출현하였고, 또한 다른 위치보다 다양한 크기의 개체들이 출현하였다. 상류수위와 채집된 소상 어류 개체수는 양의 상관성을 나타내고 있었다. 그러나 일평균 상류수위가 증가할수록 전장 70 mm 이하 소형개체들의 출현율이 감소하는 경향이 나타났다. 어도 내 시간대별 이동은 종별 생태적인 특성에 따라 차이를 보였다. 전체적으로 크기가 작은 개체부터 큰 개체까지 다양한 크기의 어류가 어도를 이용했다. 이러한 결과는 국내에 건설된 아이스하버식 어도관리 및 평가에 도움이 될 것으로 판단된다.

Electrolessly deposited Co (Re,P) was investigated as a possible capping layer for Cu wires. 50 nm Co (Re,P) films were deposited on Cu/Ti-coated silicon wafers which acted as a catalytic seed and an adhesion layer, respectively. To obtain the optimized bath composition, electroless deposition was studied through an electrochemical approach via a linear sweep voltammetry analysis. The results of using this method showed that the best deposition conditions were a CoSO4 concentration of 0.082 mol/l, a solution pH of 9, a KReO4 concentration of 0.0003 mol/l and sodium hypophosphite concentration of 0.1 mol/L at 80˚C. The thermal stability of the Co (Re,P) layer as a barrier preventing Cu was evaluated using Auger electron spectroscopy and a Scanning calorimeter. The measurement results showed that Re impurities stabilized the h.c.p. phase up to 550˚C and that the Co (Re,P) film efficiently blocked Cu diffusion under an annealing temperature of 400˚C for 1hr. The good barrier properties that were observed can be explained by the nano-sized grains along with the blocking effect of the impurities at the fast diffusion path of the grain boundaries. The transformation temperature from the amorphous to crystal structure is increased by doping the Re.

다양한 리모델링 시공 중 추가적인 하중저항을 확보하기 위한 기초시공에서는 경제성, 시공성, 소음/진동 등의 이유로 헬리컬 파일을 사용하고 있으며, 좁은 공간에서 소규모 장비를 사용하여 회전관입하므로 파일의 길이가 3m로 제한되어 다수의 연결부가 소요된다. 이러한 연결을 위해 주로 가격이 낮은 pin 타입의 연결부가 사용되고 있으나 토크에 대한 저항력이 낮고 그라우팅이 어려운 단점을 가지고 있다. 이에 기존 대비 20% 이상 토크저항성을 가지며 동시에 경제성을 확보할 수 있는 새로운 헬리컬 파일 연결부를 고안하였고 유한요소해석을 통해 구조성능을 분석하였다.

Background : This study examined EC in soil depending on leaking water rate of sun shading facilities and conducted experiments to establish the proper leaking water rate for ginseng depending on rainfall. Methods and Results : For leakage examination, rainfall flowing into a ridge. As sun shading facilities of ginseng to examine leakage, four kinds such as Blue-Pe-sheet, Pe4 (four–layered polyethylene net) + Pe2 (two–layered polyethylene net), Pe4, Pe2 were installed. As for leakage, a plastic box (23 × 30 × 30 ㎝) was installed on the ridge of ginseng field and outside, rainfall into the box during precipitation was examined, and the leakage quantity was calculated as the ratio of the quantity into the ginseng field regarding rainfall outside. The leakage quantity was examined a total of six times on July 2, July 3, August 24, August 30, August 31, and September 4. Regarding EC in soil, WT–1000n (www.rfsenser.co) which is a EC measuring instrument was used, and the average was calculated through 3 repeated examinations. There are little differences in the leakage quantity depending on the sun shading with 0.1% of the Blue-Pe-sheet, 2.3% of Pe4 + Pe2, 4.3% of Pe4, and 30.7% of Pe2. At the leakage rate of 0.1%, EC decreased from 1.52 ds/m on July 3 to 1.04 ds/m on August 8, and increased again to 1.54 ds/m on September 3 At the leakage rate of 2.4%, EC changes were lower than that of the leakage quantity of 0.1%, and similar results depending on periods were found. At the leakage rate of 4.3%, salt concentration was measured at 0.92 ds/m on July 3, decreased since then, increased to 0.90 ds/m on September 3, and overall concentration was less than 1.0 ds/m. At the leakage rate of 30.7%, EC was the lowest at 0.46 ds/m and similar results were found since then. Conclusion : The differences in leakage quantity depending on sun shading facilities of ginsengs affected EC in soil, and EC became lower with more leakage quantity. As for the leakage quantity to maintain the EC in soil proper for ginseng growth and development lower than 1.0 ds/m, it was found to be effective to control the leakage quantity at 30% in May - June, and September - October when there are less rainfall, and at 2 - 5% in July - August when there are heavy rainfall.

Background : Among registered fungicides for controlling ginseng disease, the disease occurrence rate from the mixed use of a single ingredient, mancozeb WP, and copper sulfate basic WP was examined, and experiments were conducted to establish safe disease control system. Methods and Results : As for the medicines used for the experiments, besides registered Pyraclostrobin WG as a single ingredient for ginseng disease control, 14 kinds were used for experiments. The fungicide was sprayed 5 times on June 21, July 4, July 16, August 2 and August 24. The examination was conducted 5 days, 10 days, 15 days, and 20 days after the final fungicide treatment. Anthracnose occurrence rate 5 days after the final fungicide treatment was 0.0 - 61.3% which was different depending on fungicides, and in a single treatment, the occurrence rate was less than 1% in 6 fungicides. In the single treatment, the occurrence rate was more than 1%, but 9 kinds of fungicides which had less than 1% occurrence rate in the case of mixed use with mancozeb, and one kind in the case of mixed use with copper sulfate basic 10 days later, the occurrence rate was 0.0 - 100% and there were lots of differences in the disease occurrence rate depending on fungicides. 10 kinds of fungicides showed the disease occurrence rate of more than 10.0% in the case of a single treatment. Among them, 9 fungicides showed the disease occurrence rate of less than 1.0% in the case of mixed use with mancozeb, indicating the effect of lowering disease occurrence rate in the case of mixed use. 15 days later, 9 fungicides showed disease occurrence rate of more than 2%, 1 kind of fungicide had the disease occurrence rate of less than 1%, and the overall disease occurrence rate increased. Among them, 7 kinds of fungicides showed the disease occurrence rate of less than 1% from the mixed use. 20 days later, 12 kinds of fungicides showed the disease occurrence rate of more than 50%, and only 1 kind of fungicide showed the disease occurrence rate of less than 1%. In the case of mixed use with mancozeb, 2 kinds had the disease occurrence rate of less than 10% and 1 kind of fungicide had the disease occurrence rate of less than 1%. Conclusion : For prevention of anthracnose disease of ginsengs during a rainy season, the disease occurrence rate from a single or mixed use was examined, and the examination found that rather than a single use, mixed use decreased the disease occurrence rate. In particular, the mixed use with mancozeb showed low disease occurrence rate and prevented the disease occurrence rate for a long time.

Background : Ginseng sometimes develops physiological disorders as EC of soil accumulates in sun shading facilities with no leaking water. In addition, it is difficult to make moisture content of soil and EC stably suitable for ginseng growth and development in the same sun shading facility. Accordingly, this study examined EC in soil depending on leaking water rate of sun shading facilities and conducted experiments to establish the proper leaking water rate for ginseng depending on rainfall. Methods and Results : For leakage examination, rainfall flowing into a ridge. As sun shading facilities of ginseng to examine leakage, four kinds such as Blue-Pe-sheet, Pe4 (four–layered polyethylene net) + Pe2 (two–layered polyethylene net), Pe4 , Pe2 were installed. As for leakage, a plastic box (23 × 30 × 30 ㎝) was installed on the ridge of ginseng field and outside, rainfall into the box during precipitation was examined, and the leakage quantity was calculated as the ratio of the quantity into the ginseng field regarding rainfall outside. The leakage quantity was examined a total of six times on July 2, July 3, August 24, August 30, August 31, and September 4. Regarding EC in soil, WT-1000n which is a EC measuring instrument was used, and the average was calculated through 3 repeated examinations. There are little differences in the leakage quantity depending on the sun shading with 0.1% of the Blue-Pe-sheet, 2.3% of Pe4 + Pe2, 4.3% of Pe4, and 30.7% of Pe2. At the leakage rate of 0.1%, EC decreased from 1.52 ds/m on July 3 to 1.04 ds/m on August 8, and increased again to 1.54 ds/m on September 3 At the leakage rate of 2.4%, EC changes were lower than that of the leakage quantity of 0.1%, and similar results depending on periods were found. At the leakage rate of 4.3%, salt concentration was measured at 0.92 ds/m on July 3, decreased since then, increased to 0.90 ds/m on September 3, and overall concentration was less than 1.0 ds/m. At the leakage rate of 30.7%, EC was the lowest at 0.46 ds/m and similar results were found since then. Conclusion : Differences in leakage quantity depending on sun shading facilities of ginseng affected EC in soil, and EC became lower with more leakage quantity. For the leakage quantity to maintain the EC in soil proper for ginseng growth and development lower than 1.0 ds/m, it was found to be effective to control the leakage quantity at 30% in May - June, and September - October when there are less rainfall, and at 2 - 5% in July - August when there are heavy rainfall.

Background : The insufficient soil moisture due to spring drought causes the germination rate of ginseng seeds to be remarkably lowered and the low seeding depth causes the roots not to be settled but remain in the surface soil containing moisture, resulting in the ill-shaped ginseng. Especially, in the case of paddy soil, the soil environment is often over-humidified or over-dried, resulting in high rate of occurrence of physiological disorders such as rough skin, yellow-colored root and red-colored root, etc. compared to the upland soil, requiring more care in managing the soil. Therefore, this study was conducted with the aim to investigate the effects of stamping treatment on the direct seeding cultivation in the paddy soil and to investigate the survival and growth characteristics according to the seeding method. Methods and Results : We investigated the effects of stamping on the emergency rate and growth by using rollers (15, 20, 25, 30 ㎏), and also investigated the growth characteristics according to the direct sowing methods (broadcast planting, motorized seeder, semi-automatic seeder, manual seeder, hoop-type seeder). In the emergency rate of 1-year-old ginseng group directly sowing and treated with trampling, the group treated with 25 ㎏ & 30 ㎏ showed the highest emergency rate & growth, and above-ground & underground parts growth of 1-year-old ginseng by sowing method, there was no significant difference between sowing methods, the emergency rate of motorized seeder and semi-automatic seeder was high. Conclusion : In the paddy soils, the 25 – 30 ㎏ stamping after direct seeding showed superior above-ground growth and emergency rate, and there was no significant difference in growth, but motorized seeder and semi-automatic seeder had a higher rate of emergency in 1-year-old ginseng.

The purpose of this experimental study is to develop an waterborne silicon acrylic top finishing material of car parks. The gas toxicity test was conducted in order to provide fundamental data for developing the material by implementing modified polyamide resin. The outcomes were satisfied by the quality standard regarding elapsed mean stop times of mice which is prescribed in KS F 2271. As conclusion, this study confirmed that the developed finishing material could be an optimum material capable of applying for car parks’ deck.

Background : Ginseng is perennial, frequently damaged by various diseases and insect pests, due to this, quantity and quality decreases. Particularly, Alternaria blight greatly damages the stem in its germination and the leaves after leafing. Here, this research conducted a test by investigating the control effect of lime-sulfur mixture in the market on 5 ginseng Alternaria blight, in order to utilize it as the disease control measure for disease and pest for eco-friendly cultivation of ginseng. Methods and Results : This research investigated the control effect of 5 types of lime-sulfur mixture in market on ginseng spotting disease by distributing the solvents to 5-years ginseng by 100 times and 200 times on April 29, May 15, and May 27. Also, this research investigated spore germination inhibition effect on Alternaria panax, Colletotrichum sp. and Botrytis cineria spore germination inhibition effect was investigated with spore germination inhibition ratio by manufacturing 100 times’ culture and 200 times’ culture per lime-sulfur mixture medium. There were two materials among 5 lime-sulfur mixture products to control over Alternaria blight using eco-friendly ginseng material, which didn’t damage during the leafing period of ginseng, and this research selected Sulfur 153, effective for Alternaria blight. Sulfur 153 was effective for Alternaria blight control due to its 82.2% control effect when treating by 200 times. Sulfur 153 was effective for spore germination inhibition of Alternaria panax, Colletotrichum sp. and Botrytis cineria and the rates of spore germination inhibition were 71.5, 100, 19.5% respectively. Conclusion : There were 2 materials among 5 lime-sulfur mixture products to control over Alternaria blight using eco-friendly ginseng material, which did not damage leafing period, and sulfur 153 was selected as the material effective for Alternaria blight. Sulfur 153 appeared to suppress germination of spore of Alternaria panax and Colletotrichum sp.

Background : For ginseng breed development, mostly the pure-line separation method that registers excellent varieties after performing the regional adaptation test with the varieties selected through the preliminary and main productivity tests on selected excellent individuals cultivated in farms or excellent lineages for growing from collected lineages is used. Recently, the quality of ginseng is degrading while the yield decreases by 15 - 20% due to the high-temperature injury, the physiological disorder and/or the diseases caused by the climate warming so that development of disaster tolerant varieties strong against high temperatures, salts and diseases are demanded. For such reason, three lineages showing excellent overground and underground growing were selected from the gene resources collected from 1997 to 2000. And the productivity test has been conducted with these lineages having Chunpoong and Yunpoong, the existing varieties as the reference varieties. For the lineages excellent in growing, the variety registration will be performed after the regional adaptation test. Methods and Results : The results of productivity tests on the 3 lineages (GS98-3-4, GS00-58 and GS97-69) selected for excellent growing while having Chunpoong and Yunpoong as the reference varieties show that on the 2-years-old dormant roots, all of the selected 3 lineages are better in growing compared to the reference varieties. Especially, GS98-3-4 shows excellent leaf lengths and stem lengths while GS97-69 shows excellent leaf widths. On the overground growing of 3-years-old ones, GS00-58 and GS97-69 lineages are exceedingly more excellent compared to the reference varieties while the selected 3 lineages showing superb underground growing. Especially, GS98-3-4 lineage shows great root weights and diameters. Conclusion : According to the productivity tests on the 3 lineages selected for excellent growing, the selected lineages are excellent in both overground and underground growing compared to the reference varieties of Chunpoong and Yunpoong. On the 2-years-old ginsengs, GS98-3-4 shows excellent overground growing while GS97-69 shows excellent underground growing. On the 3-years-old ginsengs, GS00-58 and GS97-69 show excellent overground growing while GS98-3-4 shows excellent underground growing.

The purpose of this experimental study is to develop the waterborne silicon acrylic surface finishing material of parking lots. Pollutant emission test was conducted in order to give a guide datum for developing the material by implementing modified polyamide resin. As a result, specimens satisfied with the quality standard regarding TVOc, HCHO, Toluene which is prescribed in KS F4937. As conclusion, this study confirmed that the developed finishing material could be an optimized surface finishing material usable for parking lot floor.

The purpose of this experimental study is to develop the waterborne silicon acrylic surface finishing material of parking lots. Adhesion strength experiment was conducted in order to enhance performance of the finishing material by adopting modified polyamide resin. The results qualified the standard regarding bond strength which is prescribed in KS F 4937. They are confirmed that the strength tend to increase as the amount of polyamide increased and could be an optimum surface finishing material applicable for parking lot floor.