ROK Navy Landing Ship Fast(LSF-II) is equipped with special equipment that is not compatible with other combat ships due to special missions. So there are almost no maintenance capabilities except for simple repair parts replacement and maintenance parts. The researcher determined that the way to solve these problems was to apply Performance Based Logistics (PBL), and reviewed the cases of PBL applications abroad and domestically. To confirm the current maintenance capability, we visited LSF-II operation unit to identify maintenance capabilities for each mounted equipment, and interviews with operators and maintenance practitioners confirmed the limitations of outsourcing maintenance and the need to apply PBL. In order to analyze the effect of PBL application, the measure of effectiveness and measure of performance were selected based on the opinions of LSF-II operation/maintenance practitioners and PBL experts and the practical experience of this researcher. A survey was conducted on operation/maintenance practitioners and professional personnel. Based on the survey results, the effect of applying PBL was analyzed using the AHP technique, and an efficient PBL application plan was proposed for LSF-II.

The Korean military has sought to build an all-round military force against the national and international security environment and future asymmetric threats as well as the military threats it faces. However, while raising the need for timely electrification, there are few cases of quantitatively evaluating the loss when electrification is delayed, making it difficult for our military to provide a logical basis to support the importance of the electrification period. Therefore, through this study, we tried to analyze the index of loss cost that can support the need for timely electrification with logical and quantitative data and present it as a logical basis. To this end, the loss cost was calculated in terms of combat efficiency, equipment utilization rate, and maintenance requirements, which can be quantitatively calculated based on “combat readiness,” a general impact on the military in case of delayed timely electrification.

The 4th Industrial Revolution and the continuous development of Science and Technology have also required a speedy business promotion method in the defense industry. Advanced countries including the United States are already boldly innovating the existing high-cost and long-term acquisition system with the highest priority in weapons development to cope with the military rise of Russia and China. The Ministry of National Defense and the Defense Acquisition Program Administration have also recently introduced a quick acquisition system and are applying it to business promotion. In addition, some small-scale projects and weapons systems are being reorganized so that they can be managed by the units demanding them. After an organizational diagnosis of the Project Acquisition Group by the Ministry of National Defense in 2020, it has been reassigned as a subordinate unit of the Army Logistics Command from a direct unit managed by the Army HQ. As a result, problems such as work conflict or redundancy have been identified. In addition, a system has been implemented to shorten the acquisition period by applying a rapid acquisition program in the field of weapons systems by benchmarking the rapid acquisition program of advanced countries. The force support system project process will also need to introduce such a quick acquisition system. In addition, the Ministry of National Defense is considering ways to delegate some weapon systems to each military, which will then carry out tasks ranging from requirements determination to project management. Accordingly, it is now time to expand the organization for the management of the Army's weapons system acquisition project. Therefore, in this paper, the Army Project Acquisition Group was analyzed on its organization, acquisition procedures, and cooperation systems, with presentations of development plans for each field.

For the past 70 years, an intense rivalry has persisted on the Korean Peninsula, and North Korea's nuclear and missile threats are becoming increasingly imminent. Facing a shortage of military resources, South Korea has pursued a national defense reform, significantly reducing the number of units and troops while focusing on ground forces. However, North Korea's strategic objective of unifying South Korea through surprise attacks, prompt responses, and combined nuclear and missile assaults remains unchanged. The central issue in this context revolves around determining the appropriate size of the Korean military's standing forces. This study employs the concept of net assessment as a novel method to ascertain the optimal size of the Korean military. Threats, strategic objectives, doctrine, and unit rotations are simultaneously considered from the enemy's perspective. In anticipation of security risks on the Korean Peninsula, an acceptable troop size will be proposed using the net assessment approach to calculate the appropriate standing force size.

본 연구는 국내 차나무 품종을 대상으로 연평균 기온이 낮은 봉화군에 식재하여, 봉화지역 차나무 재배 가능성을 검토하고자 연구를 수행하였다. 봉화군 시험지 토양 조사 결과, 시험지별 토양의 pH, EC, 치환성양이온, 유효인산은 적정수준이었으며, 유기물 함량은 대체로 낮은 수치로 조사되었 다. 봉화군 시험지 기온 조사 결과, 최저 기온은 소천면이 -14.1℃로 가장 낮았고, 다음으로 춘양면 -12.6℃, 명호면 -12.6℃, -10.2℃ 순으로 모든 시험지는 -10℃ 이하의 낮은 온도로 조사되었다. 차나무 재배 생육평가 결과, 명호면 시험지에서 생육 정도가 가장 우수하였고, 다음으로 소천면, 온실, 춘양면 순으로 조사되었다. 또한, 재배품종 보향과 대조품종 다산은 시험지 생장량과 광합성량이 다른 수종에 비해 높은 것을 확인하였 다. 봉화지역과 하동지역에 식재된 참녹의 주요 생리활성물질인 catechin과 caffeine 함량을 조사한 결과, Catechin 함량은 EGC와 EC, EGCG 함량은 하동이 높게 조사되었고, 반면 ECG는 봉화지역의 참녹이 월등히 높았다. 총 catechin 함량은 봉화 5.23%, 하동 5.22%로 비슷하게 나타났다. Caffeine 함량은 봉화 0.05%, 하동 0.38%로 하동지역의 참녹이 높게 나타났다. 본 연구에서 봉화군 차나무 재배 생육평가 결과 명호면, 소천면이 차나무 재배에 유리할 것이며, 봉화지역 차나무 재배 시 재배품종 보향과 대조품종 다산은 재배 적응성이 높을 것으로 판단된다.

This study compared the antioxidant and mineral properties of the leaves and seeds of fifteen Korean adzuki bean (Vigna angularis L.) breeding lines. This study was conducted in an attempt to expand the use of Korean adzuki bean leaves. The potassium, calcium, magnesium, and sodium contents of the leaves were significantly higher than the seeds, in particularly, the potassium content. The leaves had approximately 3.3 times higher potassium content than the seeds. For instance, the potassium content of YA1317 leaves was 21% higher than that of Arari. The total polyphenol content and ABTS activity of Adzuki bean leaves were significantly higher than the seeds, as opposed to the total flavonoid content and DPPH scavenging activity. Among the 15 breeding lines, YA1402 had 1.2~3.2 times higher antioxidant content and activity as compared to the Arari variety. It was concluded that adzuki bean leaves had higher mineral content, antioxidant component and activity as compared to the seeds. Therefore, adzuki bean leaves could be used an ingredient for dishes and as a medicine.

The recent earthquake in Korea caused a lot of damage to reinforced concrete (RC) columns with non-seismic details. The nonlinear analysis enables predicting the hysteresis behavior of RC columns under earthquakes, but the analytical model used for the columns must be accurate and practical. This paper studied the nonlinear analysis models built into a commercial structural analysis program for the existing RC columns. The load-displacement relationships, maximum strength, initial stiffness, and energy dissipation predicted by the three analysis models were compared and analyzed. The results were similar to those tested in the order of the fiber, Pivot, and Takeda models, whereas the fiber model took the most time to build. For columns subjected to axial load, the Pivot model could predict the behavior at a similar level to that of the fiber model. Based on the above, it is expected that the Pivot model can be applied most practically for existing RC columns.

As earthquakes have increased in Korea recently, people are paying attention to the seismic performance of buildings built in the past. Many school buildings in Korea were built based on standard drawings before the seismic design was applied. However, since school buildings are often designated as emergency evacuation facilities in case of disasters such as earthquakes, seismic evaluation and retrofit must be done quickly. This study investigated the failure modes among structural components (beams, columns, and joints), focusing on 1980s standard drawings for school buildings. The effects of column axial force, partial masonry infills, and different material strengths for concrete and rebar were considered for detailed evaluation. As a result, most of the joints were found to be the weakest among structural components. Column axial forces tended to make the joints more vulnerable, and partial masonry infills increased the possibility of joint failure and shear failure in columns.

This study proposed a simplified finite element analysis procedure for designing the nonstructural masonry wall in the out-of-plane direction. The proposed method is a two-step elastic analysis procedure by bilinearizing the behavior of the masonry wall. The first step analysis was conducted with initial stiffness representing the behavior up to the effective-yield point, and the second step analysis was conducted with post-yield stiffness. In addition, the orthotropic material property of the masonry was considered in the FE analysis. The maximum load was estimated as the sum of the maximum loads in the first and second step analyses. The maximum load was converted into the moment coefficients and compared with those from the yield line method applied in Eurocode 6. The moment coefficients calculated through the proposed procedure showed a good match with those from the yield line method with less than 6% differences.

본 논문에서는 CAD 시스템에서 사용하는 NURBS 기저함수를 사용하는 아이소-지오메트릭 해석(Isogeometric analysis) 방법과 기 하학적으로 엄밀한 빔 모델링(geometrically exact beam model)을 활용하여 회전과 병진 운동이 결합된 새로운 형태의 메타물질 (metamaterial)에 대한 해석을 진행하였다. 이차원 셀 구조는 자유형상변환(Free-form deformation) 법과 적절한 내삽법(Interpolation) 을 통해 원통 위에 입혀졌다. 원통의 치수와 셀 개수가 비틀림 각도에 미치는 영향이 매개변수 연구(parametric study)를 통해 확인되었 다. 비틀림과 병진 운동이 결합된 구조의 메커니즘에 대해 수치 예제를 통해 알아보았다.

As earthquakes continue to occur in Korea in recent years, seismic evaluation and retrofit of existing school buildings have been carried out. Many domestic school buildings were built using or referring to standard drawings. Therefore, if the overall structural characteristics of a school building can be known first based on standard drawings, it can be provided as valuable data for detailed seismic evaluation. For this reason, this study investigated the weak structural components and failure modes by comparing the strength of beams, columns, and joints constituting standard school buildings constructed in the 1980s. The evaluation was performed for different types of standard drawings and different material strengths. The results showed that the joint was mainly the weakest due to the eccentricity, and the failure modes were partially changed depending on the material strength.

본 연구는 임종과 동시에 칠칠재로 설행되는 사십구재의 성립과정과 재차의 전승양상에 대하여 영남지역을 중심으로 살펴본 글이다.『삼국 사기』, 『고려사』, 『조선왕조실록』등에 신라와 고려에서는 팔관회와 연등회를 열어 망자를 위령한 기록도 있고, 고려 태조 23년(940)과 광종 19년(968)에 무차대회를 열었고, 조선은 개국 후 고려 왕씨의 천도, 왕실의 안녕 등을 위해 수륙재를 설행한 많은 기록이 확인된다. 이는 칠칠재로 설행되던 수륙재가 전승되어 현재의 사십구재로 성립되었음을 알 수 있다. 이와 같은 사십구재의 성립과정에서 시대별로 간행된 의례문을 통해 재차의 전승과정도 살필 수 있다. 고려 말인 14세기에 간행된 『결수문』, 15세기 『진언권공』, 16세기 『권공제반문』, 17세기 『운수단과 『제반문』, 18세기 『제반문(청문)』, 19세기 『작법구감』, 20세기 『석문의범』을 중심으로 재차의 전승양상을 살펴보았다. 『권공제반문』의 간행은 수륙재 재차로 일관되던 것에서 현재의 사십구재 재차로 나타나는 변곡점이 되었다. 특히 중위는 수륙재의 중하단을 재정립한 시왕청으로, 하위시식은 전시식과 관음시식의 차서를 갖춘 시식문이 확인된다. 이를 바탕으로 『작법구감』과 『석문의범』은 상·중·하의 삼위가 독립된 재차로 나타난다. 상위의식은 삼보통청으로, 중위의식은 시왕청으로, 하위의식은 대령과 전시식으로 확인된다. 이는 『권공제반문』, 『작법구감』, 『석문의범』이 현재 영남지역의 사십구재 재차에 많은 영향을 미쳤다는 것을 의미한다. 수륙재로 비롯된 칠칠재가 고려와 조선을 거쳐 현재 영남지역의 사십구재 재차로 전승되었다는 것을 확인할 수 있다.

본 연구는 전문대학생의 스마트폰 중독이 사회적 지지에 미치는 영향을 분석하였다. 사회복지를 전공하는 전문대학생 200명을 대상으로 설문조사를 실시하였으며, 데이터는 SPSS(ver. 24.0) 프로그램을 사용하여 분석하였다. 이를 통해 다음과 같은 결과를 얻을 수 있었다. 첫째, 스마트폰 중독의 하위 요인 중에서 병적몰입은 사회적 지지에 영향을 미치는 것으로 나타났다. 즉, 스마트폰의 병적몰입 중독 성향이 낮을수록 사회적 지지는 높아질 것이라 할 수 있으며, 스마트폰 중독이 자존감 지지와의 관계는 유의미한 것으로 나타났다. 둘째, 스마트폰 중독의 하위 요인 중에서 통제상실은 자존감 지지에 영향을 미치는 것으로 나타났다. 즉, 스마트폰의 통제상실 중독 성향이 낮을수록 자존감 지지는 높아질 것이라 할 수 있겠다. 본 연구는 앞으로 사회복지사가 될 학생들에게 본인 및 클라이언트에 대한 영향을 줄 수 있는 스마트폰 중독 경향 및 사회적지지에 대한 보다 다양하고 체계적인 프로그램과 지속적인 관심이 필요함을 보여준다.

밴드갭은 기계적 파동의 전파가 금지되는 특정 주파수 범위를 의미한다. 본 연구는 경사도 기반의 설계 최적화 방법을 사용하여 낮은 가청 주파수 범위에서 밴드갭을 갖는 3차원 켈빈 격자를 설계하는 것을 목적으로 하고 있다. 블로흐 이론을 이용하여 무한주기 격자에서의 탄성파 전파를 해석하고, 기하학적으로 엄밀한 빔 이론에서 선형화를 통해 얻은 전단 변형 가능한 빔 모델을 사용하여 격자 구조 연결선을 모델링하였다. 주어진 격자 구성에서 중립 축 및 단면 두께를 B-spline 함수를 이용한 아이소-지오메트릭 매개화를 통해 설계 변수로 정의하고, 격자 구조의 밴드갭의 크기를 극대화하는 최적 설계를 수행하였다.