본 연구는 시설양묘 용기에서 직근성 수종인 찰피나무 유묘의 생육상황 및 뿌리발달 형태를 탐구하기 위하여 5개월 간 플라스틱 온실에서 수행되었다. 공시용기로 사용된 플라스틱 망 용기와 일반 플라스틱 용기에서 생육한 용기묘의 수고생장 차이는 크지 않았으나, 근원경 생장은 플라스틱 망 용기에서 높게 나타났다. 플라스틱 망 용기는 묘목의 뿌리발달에 영향을 끼쳐 묘목의 뿌리발달을 촉진시켰으며, 전체 지하부의 건물생산량을 증가시켰다. 특히 플라스틱 망 용기묘에서는 적극적으로 유도된 공기단근에 의하여 나선형 뿌리가 나타나지 않았다. 따라서 본 실험에 사용된 플라스틱망 용기는 찰피나무 용기묘 생산에 유용하게 활용할 수 있을 것으로 판단되며, 이 용기에서 생산된 묘목은 다양한 식재지 환경에서 식재될 경우 활착율 증가는 물론 생장율 증가도 보일 것으로 생각된다.

본 연구는 여름철 시설양묘시 생장 장해 요인으로 작용하고 있는 시설내 고온에 대한 수목 유묘의 생장 반응을 탐구하고자 임업시설양묘를 통하여 현재 우리나라에서 가장 많은 양의 묘목이 생산되고 있는 소나무(Pinus drnsiflora S. et Z.)를 대상으로 PE house 내에 일일최고온도가 각각 30~35℃, 35~40℃ 및 40℃ 이상 등 세 수준의 온도로 설계된 장소에서 실시되엇다. 생육 6주 후부터 상대적으로 온도가 높은 생육장소의 소나무 수고생장의 감소가 관측되었으며, 특히 40℃ 이상의 생육장소에서 자란 묘목의 생장감소가 시험 전 기간을 토하여 뚜렷하게 나타났다. 근원 경생장의 경우에도 상대적인 고온에서 자란 묘목의 생장이 낮아 40℃ 이상의 경우 30~35℃에서 보다 17.3%의 생장감소가 관찰되었다. 건중량의 경우 생육 10주 후의 지상부와 지하부 건중량은 30~35℃에서 자란 묘목에서 가장 높은 건중량을 나타내었으나 다른 두 처리 사이에서와 유의성은 나타나지 않은 반면 생육 16주 후의 건중량에서는 지상부, 지하부 모두 고온에 따른 차이가 나타났다. 한편 T/R율은 고온에서 자란 묘목일수록 높았다. 본 실험에서의 결과와 같이 여름철 고온에 의한 생장 감소는 건전 유량묘목 생산에 크게 영향을 끼치므로 PE 온실에서 양묘를 수행할 때애는 고온 조절에 보다 유의해야 할 것이다.

겨울철 소나무와 자작나무의 시설양묘시 생육에 필요한 야간 최저온도를 구명하고자 최저온도가 각각 5~8℃, 10~13℃및 15~18℃로 설정된 2중 피복 PE house에서 실시하였다. 설정된 온도체계는 발아 최성기 후 약 8주(4월 6일)정도까지 유지되었으며 그 후에는 자연 온도의 상승으로 야간 온도체계를 유지할 수 없었다. 온도 처리에 따른 발아율의 차이는 없었으나 발아속도는 10여일 늦어졌다. 두 수종 모두 온도 가 낮아짐에 따라 수고생장, 근원경생장 및 건중량이 감소하였다. 특히 발아 8주 후의 지상부 건중량에서 그 영향이 크게 나타난 것으로 조사되었으며, 이러한 결과는 5~8℃에서의 가장 낮은 T/R율을 유도하였다. 한편 상대적으로 낮은 온도처리에 대한 수고생장 반응은 자작나무가 보다 민감한 것으로 관찰되었다. 일반적으로 겨울철 임업 시설양묘시 설정되는 생육 최저온도의 범위는 수종에 따라 다르지만, 본 실험의 결과를 고려할 때 15℃이상은 설정되어야만 우리나라에서 겨울철 시설양묘시 정상적인 묘목의 생육이 가능하리라 판단된다.

For global electronic market, several market place standards are developing now. Though, a standard is different from others they are pursuing the same purpose of uniworld market. In this study, two standards(ebXML and UDDI) which are most strong enough to urge field engineers to consider the standards in making their products were focused. Additionally, the development priorities of ebXML which were viewed from field engineers were summarized. Finally, government actions required by field engineers to promote the development of global market place were summarized.

In many combustion systems, swirling combustion air is extensively applied as an aid for stabilization of high intensity combustion pocesses. Swirl, generally, causes significant effects on the flow field which, in turn, determines the size, shape, and stability of flames, and combustion intensity. The purpose of this study is to investigate the effect of swirls on flames produced from a model combustor designed in this paper. In order to impart swirls to the combustion air, a movable block swirl generator was used. Temperature distribution and radiative heat flux along the centerline of the swirling flame were measured. Data obtained from these swirl flows can be used as design data for high intensity or high efficiency combustion systems. The results obtained are summarized as follows: 1. Flame temperature profiles were measured at various swirl number. 2. The axial distance for maximum temperature from the centerline of burner increased as the swirl number increased. 3. Radiative heat flux increased as the swirl number and axial distance from burner increased.

GA25, 50ppm과 BA100, 200ppm을 옥수수 종자(種子)에 처리(處理)하여 발아율(發芽率) 및 호흡량(呼吸量)과 배유양분(胚乳養分)인 환원당(還元糖), 전당(全糖), 조단백질(粗蛋白質)의 이동(移動)에 대(對)하여 구명(究明)하고자 행(行)한 실험(實驗)에서 다음과 같은 결론(結論)을 얻었다. 1. 초기(初期)의 발아율(發芽率)은 GA 25ppm구(區)가 가장 높았고 BA 200ppm구(區)가 가장 낮았다. 중후기(中後期)의 발아율(發芽率)은 각(各) 처리구간(處理區間)의 차(差)가 크게 인정(認定)되지 않았다. 2. 호흡량(呼吸量)은 각구(各區) 공(共)히 발아(發芽)와 병행하여 현저히 증가(增加)되었으나 처리구(處理區)가 Control에 비(比)해 Q 가 낮고 특히 BA 200ppm구(區)가 현저하게 낮은 경향(傾向)임을 알수 있었다. 3. 배(胚)와 배유중(胚乳中)의 환원당(還元糖)과 전당(全糖)의 양(量)은 각구(各區) 공(共)히 경시적(經時的)으로 현저히 증가(增加)되나 BA 처리구(處理區)가 무처리구(無處理區)와 GA처리구(處理區)에 비(比)하여 증가율(增加率)이 낮음을 인정(認定)할 수 있었다. 4. 발아중(發芽中) 종자(種子)의 조단백질량(粗蛋白質量)은 각구(各區) 공(共)히 경시적(經時的)으로 배부(胚部)에서는 증가(增加)되고 배유부(胚乳部)에서는 감소(減少)되며 그 정도(程度)는 GA 25pppm 처리구(處理區)가 가장 현저하고 BA 200ppm처리구(處理區)의 소장(消長)이 가장 적었다.

The experiment was conducted to study on the physiology of developing embryo and endosperm degradation during germination of Zea mays seeds treated with GA 20 and B-Nine 5000 ppm. Data obtained can be summerized as follows : 1. Swelling of seminal root increased the section of GA treatment more or less, on the other hand, the section of B-9 treatment inhibited slightly. 2. According to elapsing of seeding date, epithelial cell of Scutellum expansed in size, and the space of cell increased, that degree was enlarged as follows ; the section of GA, the section of Control, and the section of B-9. 3. According to the elapsing of seeding date, the formation of vascular organization embryo became clearer little by little, the lignification of vascular B-9 treatment section rather higher than the other section. 4. The degradation of Starch Grain is composed of near part of epithelial cell of Scutellum, the shape of degradation radiate from element of a disk shape, and the speed of degradation is the section of GA, the section of Control, the section of B-9 in turn.

1980년도부터 우리나라 Burley 종 잎담배산지에서 엽맥에 녹대병상 또는 괴저증상을 나타내는 새로운 병징이 관찰되기 시작하였다. 기주범위조사, 항혈청반응, 물리적성질조사, 복숭아혹진딧물에 의한 전염여부 및 바이러스 입자 관찰을 통해 이들은 서로 병징을 달리하는 PYY의 두가지 계통으로 밝혀졌다. 이 계통들은 잎담배포장에서 자연감염에 의해 나타난 주요병징에 따라 엽맥연대계통 (PVY-VB)과 엽맥괴저계통 (PVY-VN) 으로 명명하였다. PVY 항혈청과 이 계통들의 이병즙액을 반응시킨 결과 양성반응을 나타냈으며 그 반응에서는 두계통간의 차가 없었다. 이들과 병징이 유사한 tobacco etch virus 및 tobacco vein mottling virus 항혈청과의 반응에서는 음성반응을 나타냈다. 전자현미경에 의해 약 730 nm의 사상형 바이러스 입자가 관찰되었으며 그 형태와 크기에는 두 계통간 차가 없었다.

Background : Acer pictum is a deciduous tree belonging to the family Aceraceae. This study was conducted to collect basic data on mass propagation techniques by surveying the germination and growth characteristics of A. pictum seeds. Methods and Results : A. pictum seeds were harvested in 2014 on August 19, September 5, September 29 and October 31. The seeds were then sown on the same dates they were harvested. A portion of seeds harvested in August 2014 were stored at low temperatures and subsequently sown on March 11, 2015. The germination rate of A. pictum seeds was highest in seeds that were stored harvested on October 31. Mean germination time (MGT) was shortest and germination velocity (Rs) was fastest in seeds harvested on October 31. Root collar diameter, total root length, and dry weight were also highest from seeds collected October 31. Conclusions : A. pictum seeds harvested on October 31 had highest germination and growth rates compared with seeds harvested on earlier dates. It is expected that these results demonstrating optimum harvesting and sowing dates will be applicable to future seedling production for this tree species.

Background : Aruncus dioicus var. kamtschaticus, functional wild vegetable, is perennial herb and young leaves with soft texture are generally used as edible food. So the demand for the vegetable has increased recently. This study was carried out to determine the effects of temperature and shading on germination characteristics of A. dioicus. Methods and Results : The experiment was performed by temperature and shading treatments. Seed pre-treatment before the germination experiment was carried out by the storage in low temperature (4℃) under wet condition (LTW) for 0, 15, 30, 45 and 60 days and shading treatment were 35%, 50%, and 75% under control, BA (6-benzyladenine) and GA3 (gibberellic acid) condition for 24 hours. Increasing the length of the storage periods led to increases seed germination percent in low temperature (4℃) under wet condition (LTW), germination rate of A. dioicus seed was the highest at 15℃ with 60 days of seed pre-treatment. In the case of seeds pre-treatment with LTW, the more temperature went up, the more days to 50% of Germination of Final Germination Rate (T50) went down. As a result of surveying shading treatment, germination rate was the highest in control of 35% shading and the next higher was in control of 50% shading. Conclusions : It is concluded that the temperature and shading are important factors to produce A. dioicus. Also, We suggest these results as basic data of A. dioicus for sexual propagation.

This study was carried out to determine the effects of light controls and leaf mold on root growth and physiological responses of Atractylodes japonica growing in forest farming. The experiment was performed by light controls (100%, 62.5%, 40.3% and 19.7% of full sunlight) and application of leaf mold to soil. Height, stem diameter, number of flower buds and root collar diameter were the highest in leaf mold within 62.5% of full sunlight (relative light intensity 62.5%). And these were the higher in leaf mold within each light level. As the shading level increased, light saturation point and maximum photosynthesis rate decreased. As the light level decreased, SPAD value increased in control and leaf mold. As a result of surveying the whole experiment, A. japonica was judged worse root growth under the lower light level. It was concluded that the light level was one of the most important factors to produce A. japonica. Also, producing high-quality of A. japonica with the price competitiveness by using leaf mold like the experiment can be an effective way to increase incomes for farmers.

This study was carried out in order to investigate the photosynthesis response and leaf characteristics of Peucedanum japonicum growing in forest farming. The experiment was performed by leaf mold (pine tree and chestnut tree) and shading levels (0%, 35%, 50% and 75% shading). Light relative intensity was 100% (full sunlight), 60.3% (35% shading), 35.1% (50% shading), and 17.4% (75% shading) respectively. Light response curves of pine-leaf mold and chestnut-leaf mold were the highest in control (full sunlight) and these were getting lower in the higher shading level. Photosynthesis capacity and light saturation point were indicated higher in chestnut-leaf mold within the same shading level. As the shading level increased, maximum photosynthesis rate decreased. And apparent quantum yield was not indicated statistically significant difference from all treatment. Leaf area, leaf length and leaf width were significant higher in 35% shading and control under chestnut-leaf mold in all treatment. As the shading level increased, LAR (leaf area ratio), SLA (specific leaf area) and SPAD value decreased in pine-leaf mold and chestnut-leaf mold. As a result of surveying the whole experiment, P. japonicum is judged better growth and higher yield by maintaining 35% shading (relative light intensity 60%) under chestnut-leaf mold in forest farming.

This study was carried out in order to investigate the early growth and root development characteristics of Peucedanum japonicum container seedlings. The experiment was performed by containers (128 and 200 cavities containers) and shading levels (0%, 35%, 50% and 75% shading). Germination rate of P. japonicum seeds was getting higher in the lower shading level and the highest in the full sunlight (71.9%). Plant height was the highest under 50% shading of all containers. Fresh weight and dry weight of the shoot (leaves + stem) were the highest under 50% shading of all containers, too. Meanwhile, fresh weight and dry weight of the root per plant were the highest under the full sunlight of 128 cavities container such as 0.34 g and 0.03 g, respectively. Total root length, root project area and root surface area were higher under the full sunlight of 128 cavities container such as 234.5 cm, 6.6cm2 and 20.8cm2, respectively and the next higher was under 35% shading such as 201.7 cm, 5.9cm2 and 18.4cm2, respectively. A case of root volume was the highest with 0.15cm3 under the full sunlight. As a result of the surveying the whole experiment, it is concluded that the shoot and root of P. japonicum seedling grow nicely by maintaining 35% shading.

This study was carried out to produce more Parasenecio firmus in forest farming. In order to achieve thispurpose, it was surveyed the growth and photosynthetic characteristics of P. firmus. Relatively light intensity was controlledby 100%, 60%, 30% and 5% of full sunlight. Height was the highest under 5% of full sunlight. Shoot diameter was the high-est in full sunlight. Fresh weight (leaf, stem, root and total) and dry weight (leaf, root and total) were the highest under 30%of full sunlight. S (leaf+stem)/R (root) ratio was the lowest under 30% of full sunlight and the highest under 5% of full sun-light. In leaf characteristics, leaf area, SLA and LAR were getting higher in the lower light level and the highest under 5% offull sunlight (176.1㎠, 420.5㎠•g−1 and 123.5㎠•g−1). Especially, leaf area was surveyed higher under 30% of full sunlightin the next. Leaf thickness was getting lower in the lower light level and the lowest under 5% of full sunlight (overall0.14~0.24㎜). As a result of surveying the whole experiment, P. firmus grows well under 30% and 5% of full sunlight inforest farming.

This study was carried out in order to investigate the early growth and root development characteristics ofAtractylodes japonica container seedling. Experiment was performed by light intensity (100%, 60%, 25% and 10% of fullsunlight). Height was surveyed well under 25% of full sunlight (overall 11.013.0%). Root collar diameter was the highest inthe full sunlight (7.52㎜). It was the highest fresh weight (1.52g, 0.92g, 0.90g and 3.34g) under 25% of full sunlight, rootdry weight was getting higher in the higher light level and the highest in the full sunlight (0.13g). Total root length, rootproject area, root surface area and root volume were the highest under 25% of full sunlight (434.7㎝, 17.4㎠, 54.7㎠,0.55㎤, respectively) and the lowest under 10% of full sunlight. As a result of surveying the whole experiment, A. japonica isjudged nicely by maintaining 25% of full sunlight, excepting 10% of full sunlight. And light levels during the early growthare overly important to improve early growth.

Recent years, there is increasing demand for seedlings of Daphniphyllum macropodum. However, the bare-root nursery of the species has been reported to be challenging due to meteorological disasters caused by climate change. The study aims to investigate the appropriate levels of shade and fertilization of container-grown D. macropodum, which has shade tolerance in seedling stage. The shading treatment was regulated with the shading level of full sun, and 35%, 55%, 75% of full sun. The fertilizing level was made by regulating Multifeed 19 (N:P:K =19:19:19, v/v) with 1000mg·L-¹, 2000mg·L-¹, 3000mg·L-¹, together with the control. The height was indicated to be the highest in 3000mg·L-¹ under 55% of shading. The root collar diameter was surveyed to be the highest in 1000mg·L-¹ and 3000mg·L-¹ of full sun. A case of the whole dry mass production was surveyed to be the highest in 3000mg·L-¹ under 55% of shading and 2000mg·L-¹ under 35% of shading. Moreover, the study is to explore the possibility of production and sound growth of D. macropodum seedlings by container nursery; consequently, the result is expected to provide the production method of the seedlings of D. macropodum that is to overcome meteorological disasters from bare-root nursery.