본 연구는 2020년 이후 한류에 대한 소비자의 인식을 살피고자 중국 내 한류에 대 한 인식과 한국 내 한류 인식을 파악하여 양국의 현황을 분석하는 것을 목적으로 한 다. 이를 위해 텍스톰(TEXTOM)을 활용하여 2020년∼2023년 동안의 주요 포털사이 트 및 SNS에서 ‘한류’와 관련된 빅데이터를 수집하였다. 단어빈도분석, 감성분석, 네 트워크 시각화, 구조적 등위성 분석을 수행하여 유의한 정보를 추출하였다. 연구결과 팬데믹 이후 양국의 영상콘텐츠에 대한 높아진 관심은 공통적인 현상이었으나, 한류 에 대한 긍‧부정 감성, 담론에 있어서는 새롭고 유의미한 차이점이 도출되어 이를 기반으로 학문적, 실무적 시사점을 제시하였다. 본 연구가 신(新)한류 시기에 K-콘텐 츠의 한·중 인식파악을 위한 유용한 자료로 활용될 수 있길 바란다.

Freshwater jellyfish, a type of jellyfish exclusively found in freshwater, has a limited number of species but is found globally. However, their ecology and causes of occurrence are largely unknown. Therefore, understanding the distribution of polyps, which produce the larvae of freshwater jellyfish, can provide important data for comprehending their ecology. This study aims to explore the COI gene of freshwater jellyfish using environmental DNA from the microbial film in the Miho River system. Among the 12 survey points in the Miho River watershed, genetic material of freshwater jellyfish was detected in 8 points, mainly located upstream near reservoirs. These genetic materials were identified as genes of the well-known freshwater jellyfish species, Craspedacusta sowerbii. Notably, the C. sowerbii genes found in the Miho River watershed survey points were closely related to a species previously discovered in Italy. Consequently, utilizing environmental DNA to explore the genetic traces of freshwater jellyfish enables rapid screening of areas with a high likelihood of freshwater jellyfish occurrence. This approach is deemed to provide crucial information for understanding the distribution and ecology of freshwater jellyfish in Korea.

This study was carried out to develop a system to reduce ultrafine dust using hygroscopic materials such as glycerin and propylene glycol. Prior to the development of an ultrafine dust reduction system, the moisture condensation efficiency of glycerin and propylene glycol was investigated based on relative humidity (RH). The results showed that when no substances (glycerin and propylene glycol) were added to a tedlar bag, the relative humidity and temperature remained constant. The moisture condensation efficiency of glycerin was 60%, and the time it took to reach 50% of the initial relative humidity was about 40minutes. In the case of propylene glycol, the moisture condensation efficiency was 75%, and the time it took to reach 50% of the initial relative humidity was about 10 minutes. When glycerin and propylene glycol mixture was added, the moisture condensation efficiency was 68% and it took 20 minutes to reach 50% of the initial relative humidity. These results suggest that hygroscopic materials such as glycerin and propylene glycol can actually condense moisture in the atmosphere. In addition, considering actual atmospheric conditions, the relative humidity was set to 60% and 40% or less, and the moisture condensation efficiency was measured. The results showed that the mixture of glycerin and propylene glycol yielded the highest condensation efficiencies, at 69% and 62%, respectively. Therefore, it is preferable to use a mixture of glycerin and propylene glycol to condense moisture in the range of relative humidity in the actual atmosphere.

Cucurbita is one of the crops with high demand in the world. Securing breeding sources is crucial and fundamental to any plant breeding program. This study was conducted to investigate the characterization of phenotypic traits and phylogenetic classification of germplasm provided by the National Agrobiodiversity Center of RDA. Fourteen phenotypic traits were measured in 199 accessions of Cucurbita germplasm. Among these germplasm, 92 accessions of C. moschata, 34 accessions of C. maxima, and 73 accessions of C. pepo were classified using the KASP marker from the Seed Industry Center. It was confirmed that there were five classifications in C. moschata, five in C. maxima and four in the C. pepo. The results of this study provide fundamental data on Cucurbita germplasm and are expected to be useful in breeding programs.

The objective of this study was to achieve biological control of green mold disease in Pyogo mushrooms using antagonistic microorganisms. Bacillus subtilis BSM320 cells inhibited mycelial growth by 48–60% against three Trichodermaisolates including T. hazianumisolated from the substrates of Lentinula edodes, showing their antifungal activity.The bacteria were cultured to a high density of 4.2 x 109±113.7 cfu/mlin aqueous extract of composted spent mushroom substrates of L. edodes containing 1% glucose and showed a higher growth rate than that observed when using the commercial medium, Luria-Bertani broth. The bacterial culture showed a 75% protective effect without damaging the mushroom fruiting bodies. These results suggest that B. subtilis BSM320culture is suitable for biological control of green mold disease during mushroom cultivation.

The construction industry stands out for its higher incidence of accidents in comparison to other sectors. A causal analysis of the accidents is necessary for effective prevention. In this study, we propose a data-driven causal analysis to find significant factors of fatal construction accidents. We collected 14,318 cases of structured and text data of construction accidents from the Construction Safety Management Integrated Information (CSI). For the variables in the collected dataset, we first analyze their patterns and correlations with fatal construction accidents by statistical analysis. In addition, machine learning algorithms are employed to develop a classification model for fatal accidents. The integration of SHAP (SHapley Additive exPlanations) allows for the identification of root causes driving fatal incidents. As a result, the outcome reveals the significant factors and keywords wielding notable influence over fatal accidents within construction contexts.

국내외 청년 비정규직 근로자의 비율 증가하는 가운데, 이들이 일터에서 경험하는 직무 관련 인식과 직업 적응은 이후의 일과 삶에 대한 태도에 영향을 미친다는 점에서 중요하다. 본 연구의 목적은 청년 비정규직 근로자의 직무만족에 따른 잠재프로파일을 식별하고, 프로파일 결정에 직업 적응 및 직무 적합 관련 변인이 미치는 영향과 프로파일별 삶의 만족 차이를 규명하는 데 있다. 연구 목적을 달성하기 위해 한국고용정보원에서 제공하는 ‘2020 대졸자 직업이동 경로조사’에서 수집된 1,935명의 자료를 활용하였으 며, 잠재프로파일분석(LPA)을 적용하였다. 분석 결과, 직무만족 요인에 따라 5개의 프로파일(매우 불만 족, 대체로 불만족, 개인발전 불만족, 대체로 만족, 매우 만족)로 분류되었다. 각 프로파일 유형에 속할 확률은 선행변인 중에서 교육 수준, 기술 및 기능, 전공 일치 및 전공 도움 정도가 유의한 영향을 미치는 것으로 나타났다. 또한 삶의 만족은 프로파일 유형별로 유의한 차이가 있음을 확인하였다. 연구 결과를 바탕으로 청년 비정규직 근로자의 개인별 맞춤형 직업 적응 및 인적자원 개발과 관리를 위한 이론적, 실 천적 시사점에 대해 논의하였다.

Seismic fragility curves play a crucial role in assessing potential seismic losses and predicting structural damage caused by earthquakes. This study compares non-sampling-based methods of seismic fragility curve derivation, particularly the probabilistic seismic demand model (PSDM) and finite element reliability analysis (FERA), both of which require employing sophisticated finite element analysis to evaluate and predict structural damage caused by earthquakes. In this study, a three-dimensional finite element model of API 5L X65, a buried gas pipeline widely used in Korea, is constructed to derive seismic fragility curves. Its seismic vulnerability is assessed using nonlinear time-history analysis. PSDM and a FERA are employed to derive seismic fragility curves for comparison purposes, and the results are verified through a comparison with those from the Monte Carlo Simulation (MCS). It is observed that the fragility curves obtained from PSDM are relatively conservative, which is attributed to the assumption introduced to consider the uncertainty factors. In addition, this study provides a comprehensive comparison of seismic fragility curve derivation methods based on sophisticated finite element analysis, which may contribute to developing more accurate and efficient seismic fragility analysis.

본 연구의 목적은 허벅다리걸기 시 유도 선수들의 무릎 관절 부상 경험이 운동학적 요인과 압력 중심 요인들에 미치는 영향을 분석하는데 있었다. 본 연구에는 허벅다리걸기를 특기로 하는 오른손잡이 남 자 대학 유도 선수 중 최근 2년 이내 무릎 관절 부상 경험이 있었던 13명(연령, 20.69.1±0.75 세; 신장, 172.85±4.81 cm; 체중, 74.92±5.51 kg; 경력, 8.92±0.95 세)과 상해 경험이 없었던 13명(연령, 21.08.1±0.76 세; 신장, 172.54±6.32 cm; 체중, 76.62±9.09 kg; 경력, 9.46±0.94 세)이 두 그룹으로 나 뉘어 피험자로 참여하였다. 두 그룹의 발목, 무릎, 힙 관절각도 변인과 압력 중심 가동범위와 속도 요인들 의 차이를 분석하였다. 그 결과, 부상 경험 그룹은 부상 경험이 없었던 그룹에 비해 허벅다리걸기 기술 발 휘 시 한발 지지 구간 중 E3에서의 무릎 관절 굴곡 각도와 E4에서의 힙 관절 신전 각도에서 작은 수치를 나타내었다. 더불어 부상 경험 그룹은 부상 경험이 없었던 그룹에 비해 한발 지지 구간에서 압력 중심 가동 범위와 전방 이동 속도 요인에서도 낮은 수치를 나타내었다.

A universal joint is a device that transmits the power of a combat vehicle engine to a cooling fan. The power of the engine is transmitted to the universal joint as it is without buffering, and play occurs at the joint between the drive shaft connected to the engine and the driven shaft connected to the cooling fan according to the usage time. Accordingly, the universal joint is periodically replaced, and the criterion for this is the degree of torsion of the universal joint. However, if the universal joint is not properly maintained during the replacement cycle, damage to the universal joint as well as damage to the surrounding power supply may occur. Accordingly, a backlash measuring device was developed to determine the limit of durability of the universal joint, and the limit of durability was derived through regression analysis of the backlash value according to the use time obtained from the accelerated life test.

굴은 패류 양식생산량 중 가장 큰 비율(평균 76%)을 차지하는 중요한 양식생물이다. 본 연구에서는 자란만의 굴 양식장에 대 해, 수온, 염분, 해수 유동, DO, SS, Chl.a를 어장적지평가 인자로 활용한 서식지 적합 지수(Habitat Suitability Index, HSI)를 산정하여 최적 서 식지를 탐색하였다. 조사결과 만 입구가 넓고 해수 유속이 빠르게 나타난 대상해역 남동쪽에서 만 내측으로 갈수록 적합한 서식지로 나 타났고, 굴의 생산량과 본 연구의 HSI는 0.710(p<0.05)의 유의한 상관성을 보였다. 만 내의 원활한 해수 교환으로 먹이공급 등 양식생물 성 장에 도움을 주는 해수 유동은 굴 생산량과 높은 상관성(0.709, p<0.05)을 보여 Chl.a보다 서식 적합도에 더 큰 영향을 미치는 것으로 나타 났다. 본 연구 결과는 양식장 재배치 등 효율적인 연안어장 보전, 이용과 관리에 도움이 될 수 있을 것으로 판단된다.

3Y-TZP (3 mol% yttria-stabilized tetragonal zirconia polycrystals) ceramics have excellent mechanical properties including high fracture toughness, good abrasion resistance as well as chemical and biological stability. As a result, they are widely used in mechanical and medical components such as bearings, grinding balls, and hip implants. In addition, they provide excellent light transmittance, biocompatibility, and can match tooth color when used as a dental implant. Recently, given the materials’ resemblance to human teeth, these ceramics have emerged as an alternative to titanium implants. Since the introduction of CAD/CAM in the manufacture of ceramic implants, they’ve been increasingly used for prosthetic restoration where aesthetics and strength are required. In this study, to improve the surface roughness of zirconia implants, we modified the 3YTZP surface with a biocomposite of hydroxyapatite and forsterite using room temperature spray coating methods, and investigated the mixed effect of the two powders on the evolution of surface microstructure, i.e., coating thickness and roughness, and biological interaction during the in vitro test in SBF solution. We compared improvement in bioactivity by observing dissolution and re-precipitation on the specimen surface. From the results of in vitro testing in SBF solution, we confirmed improvement in the bioactivity of the 3Y-TZP substrate after surface modification with a biocomposite of hydroxyapatite and forsterite. Surface dissolution of the coating layer and the precipitation of new hydroxyapatite particles was observed on the modified surface, indicating the improvement in bioactivity of the zirconia substrate.

Lithium (Li) is a key resource driving the rapid growth of the electric vehicle industry globally, with demand and prices continually on the rise. To address the limited reserves of major lithium sources such as rock and brine, research is underway on seawater Li extraction using electrodialysis and Li-ion selective membranes. Lithium lanthanum titanate (LLTO), an oxide solid electrolyte for all-solid-state batteries, is a promising Li-ion selective membrane. An important factor in enhancing its performance is employing the powder synthesis process. In this study, the LLTO powder is prepared using two synthesis methods: sol-gel reaction (SGR) and solid-state reaction (SSR). Additionally, the powder size and uniformity are compared, which are indices related to membrane performance. X-ray diffraction and scanning electron microscopy are employed for determining characterization, with crystallite size analysis through the full width at half maximum parameter for the powders prepared using the two synthetic methods. The findings reveal that the powder SGR-synthesized powder exhibits smaller and more uniform characteristics (0.68 times smaller crystal size) than its SSR counterpart. This discovery lays the groundwork for optimizing the powder manufacturing process of LLTO membranes, making them more suitable for various applications, including manufacturing high-performance membranes or mass production of membranes.

To identify sand crab Ovalipes punctatus populations and establish management units for each population, mtDNA COI regions were analyzed. As a result, the clade of O. punctatus in Korea were separated by two with a genetic distance of 0.17 – 2.08%, and there was no significant difference in the result of pairwise FST values representing genetic differentiation by sampling areas (p > 0.05). Also, no geographical separation found in the distribution of haplotypes and the results of the haplotype network. This result suggests that O. punctatus larvae were dispersed for a long time by the ocean current by suffering meroplanktonic period for 1 month, and increased the gene flow due to the development of the swimming legs for the increase in mobility. Therefore, in the results of mtDNA COI region analysis of O. punctatus in the East Sea, Yellow Sea, South Sea and East China Sea (Ieodo) of Korea, no clear intra-species differentiation was found.