본 연구는 우리나라에 자생하는 목본 관상용 식물인 먼나무 (Ilex rotunda)와 으름덩굴(Akebia quinata)을 대상으로 삽목 효율을 분석하였다. 삽수는 녹지와 숙지로 구분하고 생장조절 제 indole-3-butyric acid (IBA)와 시판용 발근촉진제 루톤 (Rootone)을 처리하여 대조군과 비교하였다. 그 결과, 발근율 (녹지, 숙지)은 먼나무(50.9, 19.0%) 및 으름덩굴(52.8, 28.5%) 로 두 수종 모두 숙지보다는 녹지가 손쉽게 발근되었다. 생장조절 제의 발근 촉진 효과는 녹지보다는 숙지에서 두드러졌으며, 생장 조절제 효과는 두 수종에서 상이하게 나타났으며, IBA와 루톤에 대한 두 수종의 발근 반응이 다르게 나타냈다. IBA 1,000ppm 처리는 먼나무의 발근을 촉진시켰고(65.9%) 으름덩굴에서는 고 사에 따른 발근율 저하를 야기하였으며(5.0%), 오히려 으름덩굴 은 루톤 처리로 발근이 촉진되었다(83.3%).

Because intact FMDV particles (146S) are often unstable in vitro, stabilizing foot-and-mouth disease virus (FMDV) antigens remains a key challenge in studying viral charateristics. Therefore, finding optimal condition to stabilize the FMDV is essential. In this study, we investigated formulations and potentials of several stabilizers such as appropriate buffer, excipients, and storage conditions to enhance the stability of 146S. Inactivated FMDV O-Jincheon (O-JC) was dissolved in various buffer formulations, and stored at 4℃ for two months to evaluate quantity of 146S at every 2-week interval. Among phosphate buffered saline (PBS), Tris buffered saline (TBS), HEPES buffered saline (HBS), and MOPS buffered saline (MBS), PBS showed more effective 146S stabilization that showed 1.3-1.6 fold higher 146S fraction than TBS, HBS, and MBS after storage for 2 weeks. However, constant dissociations of 146S were observed in all formulations at 8 weeks. Compared with other FMDVs, A22 Iraq and SAT-1, in PBS, O-JC proved to be the least stable in PBS. A variety of excipients including carbohydrate, sugar alcohol, cryo-protectant were tested for the capability in protecting O-JC from dissociation. By adding 4-8% sucrose, more than 60% of 146S fractions were maintained at 8 weeks, those were at least 1.8 fold higher than the PBS-only control. Addition of 1% β-cyclodextrin showed synergistic enhancement in O-JC stability. As the results of this study, it could be suggested that the PBS-based buffer together with 4-8% sucrose + 2% sorbitol or 2% sucrose + 2% sorbitol + 1% β-cyclodextrin could help the better stability of the O-JC in vaccine preparation.

We produced an activated carbon using sodium-lignosulfonate, in which we investigated how the sodium salt in lignin served as the activating agent during heat treatment. Our process resulted in a product with a high specific surface area of 1324 m2/ g at 800 °C and microporous structure. During the activation process, we observed the consumption of carbon due to the dehydration reaction of NaOH and the reduction of Na2CO3 to metallic Na, which created pores through oxidation/ reduction reactions. The intercalation of metallic Na between the lattices at high temperatures formed additional pores and increased the specific surface area. Our proposed mechanism holds promise for enhancing the control of the microstructure and porosity of activated carbons through the thermal treatment of biomass.

In 2022, research for native prokaryotic species in Korea reported 10 unrecorded bacterial strains affiliated to phyla Actinomycetota, Bacillota, and Pseudomonadota. The strains formed monophyletic clades with the most closely related species (with ≥98.7% sequence similarity) in the 16S rRNA gene sequencing. Among them, four species of the phylum Actinomycetota, two species of the phylum Bacillota, and four species of the phylum Pseudomonadota have not been reported in Korea, suggesting unrecorded species in Korea. Information on strains such as Gram staining reaction, colony and cell morphology, biochemical characteristics, and isolation sources were provided in the species description.

Biomass-derived porous carbon is an excellent scientific and technologically interesting material for supercapacitor applications. In this study, we developed biomass-derived nitrogen-doped porous carbon nanosheets (BDPCNS) from cedar cone biomass using a simple KOH activation and pyrolysis method. The BDPCNS was effectively modified at different temperatures of 600 °C, 700 °C, and 800 ℃ under similar conditions. The as-prepared BDPCNS-700 electrode exhibited a high BET surface area of 2883 m2 g− 1 and a total pore volume of 1.26 cm3 g− 1. Additionally, BDPCNS-700 had the highest electrical conductivity (11.03 cm− 1) and highest N-doped content among the different electrode materials. The BDPCNS-700 electrode attained a specific capacitance of 290 F g− 1 at a current density of 1 A g− 1 in a 3 M KOH electrolyte and an excellent longterm electrochemical cycling stability of 93.4% over 1000 cycles. Moreover, the BDPCNS-700 electrode had an excellent energy density (40.27 Wh kg− 1) vs power density (208.19 W kg− 1). These findings indicate that BDPCNS with large surface areas are promising electrode materials for supercapacitors and energy storage systems.

The inclusion of conductive carbon materials into lithium-ion batteries (LIBs) is essential for constructing an electrical network of electrodes. Considering the demand for cells in electric vehicles (e.g., higher energy density and lower cell cost), the replacement of the currently used carbon black with carbon nanotubes (CNTs) seems inevitable. This review discusses how CNTs can contribute to the development of advanced LIBs for EVs. First, the reason for choosing CNTs as a conducting agent for the cathode is discussed in terms of energy density. Second, the reinforcing effect of CNTs on the anode is described with respect to the choice of silicon as the active material. Third, the development of water-based cathode fabrication as well as dry electrode fabrication with aid of CNTs is discussed. Fourth, three technical hurdles, that is, the price, dispersion issue, and entrapped metal impurities, for widespread use of CNTs in LIBs are discussed.

The slaughter of livestock is inevitably required to obtain meat products from livestock. Since slaughter means pain and death for animals, reducing the pain and distress of animals during slaughter is very important from a perspective of animal welfare based on the principle of respect for life. Generally, two stunning methods, CO2 stunning and electrical stunning, are used for slaughter. When the carotid arteries of the lungs are cut off for bleeding, the bronchial tubes are also severed. To determine the degree of blood inflow into the lungs through the severed bronchial tubes, the prevalence rates of pulmonary diseases and pulmonary congestion in slaughtered pigs were analyzed. In this study, the prevalence of pneumonia was 24.9% in Slaughterhouse A using the gas method, but it was decreased by about 10% to 15.7% and 12.6%, respectively, in Slaughterhouses B and C using the electric method. On the other hand, the prevalence of pulmonary congestion in Slaughterhouses A, B, and C was 4.24%, 14.10% and 16.40%, respectively. In other words, the prevalence of pulmonary congestion was higher by about 10% in the groups of pigs slaughtered by the electric method (Slaughterhouses B and C) than in the group of pigs slaughtered by the gas method (Slaughterhouse A). These results indicate that blood inflow into the pulmonary alveoli led to a diagnosis of pulmonary congestion instead of pneumonia in some pigs with pneumonia. In short, it was found that about 10% of pigs stunned by the electric method were not in a state of complete unconsciousness but in a partially conscious state during slaughter. It is suggested that slaughterhouses should be equipped with gas stunning equipment instead of applying the electric method due to lower costs.

Non-destructive estimation of leaf area is a more efficient and convenient method than leaf excision. Thus, several models predicting leaf area have been developed for various horticultural crops. However, there are limited studies on estimating the leaf area of strawberry plants. In this study, we predicted the leaf areas via nonlinear regression analysis using the leaf lengths and widths of three-compound leaves in five domestic strawberry cultivars (‘Arihyang’, ‘Jukhyang’, ‘Keumsil’, ‘Maehyang’, and ‘Seollhyang’). The coefficient of determination (R2) between the actual and estimated leaf areas varied from 0.923 to 0.973. The R2 value varied for each cultivar; thus, leaf area estimation models must be developed for each cultivar. The leaf areas of the three cultivars ‘Jukhyang’, ‘Seolhyang’, and ‘Maehyang’ could be non-destructively predicted using the model developed in this study, as they had R2 values over 0.96. The cultivars ‘Arihyang’ and ‘Geumsil’ had slightly low R2 values, 0.938 and 0.923, respectively. The leaf area estimation model for each cultivar was coded in Python and is provided in this manuscript. The estimation models developed in this study could be used extensively in other strawberry-related studies.