The purpose of this study was to develop synbiotic materials and to apply them to the puffed grain products using electrostatic spraying technology. Lactic acid bacteria were isolated from Kimchi and selected through tests of acid resistance, bile salt resistance and γ-aminobutyric acid (GABA) content. The isolated Lactobacillus brevis CFM21 produced highest GABA production up to a concentration of 926.42 μg/mL when grown in MRS broth containing 0.8% MSG. The possibility of coated grains as a prebiotic material was evaluated Confocal laser scanning micro scopy (CLSM). Rice bran extract containing 2% dextrose, 2% soytone, 0.2% potassium chloride, 0.6% MSG was produced 524.77 μg/mL of GABA. Citrus sinensis oil showed the highest antibacterial activity against Clostridium perfringens Electrostatic spray showed much higher effectiveness than conventional spray in coating the puffed grain product through CLSM. Applying Rice bran culture and Citrus sinensis oil to puffed grain product using electrostatic spray could contribute to promote intestinal health of consumers.

Developmental characteristics of immature stages of Ostrinia scapulalis (Lepidoptera: Crambidae), which is a main insect pest against legume crops, were investigated at constant temperatures to prepare fundamental data for integrated pest management. Egg, larva and pupa could survive at temperatures from 16oC to 36oC. Developmental periods of those stages became shorter with increasing temperature between 16 and 31oC, 16 and 36oC, and 16 and 34oC, respectively. The lower developmental thresholds and degree-days(DD) were determined as 13.0oC and 56.9DD, 13.8oC and 277.5DD, and 14.2oC and 90.8DD using a linear regression model between temperature and development rate. Other parameters for explaining development of this species were estimated using a few non-linear models for developmental rate, distribution, and survivorship.

This study was aimed to determine the effects of hybrid and inoculant on in vitro rumen digestibility and rumen fermentation indices of corn silage. Two corn hybrids(Kwangpyeongok (KW) vs. Pioneer 1543(PI)) were ensiled for 100 days with two inoculants(L. plantarum(LP) vs. L. buchneri(LB)) applied at 1.2 × 105 cfu/g of fresh forage. Silages were incubated in rumen fluid medium at 39℃ for 72 hours. Both of KW and PI had no difference(p>0.05) on in vitro digestibility of dry matter(IVDMD) and neutral detergent fiber(IVNDFD), while application of LB produced higher(p<0.05) IVDMD and IVNDFD than LP. Hybrid and inoculant applications did not affect(p>0.05) total gas volume, ammonia-N, total VFA, and acetate concentrations in the rumen. Applied LB was higher(p<0.05) propionate concentration than LP, while hybrids had no effect(p>0.05). Furthermore, the interaction effect(p<0.05) was occurred in propionate concentration. Butyrate concentration did not affected(p>0.05) by hybrid and inoculant applications, but there was an interaction effect between hybrid and inoculant(p<0.05). Applications of hybrid and inoculant had effects(p<0.05) on iso-butyrate and valerate, without any interaction effects(p>0.05). This study concluded that application of KW and PI has no effects on in vitro rumen digestibility and rumen fermentation indices of corn silage, while application of LB increase the rumen digestibility in both of corn hybrids.

This study was conducted to examine the effect of new inoculants on in vitro digestibility and fermentation characteristics of high moisture rye silage. Rye was harvested at heading stage and divided into 5 treatments, following: No additives(CON); L. plantarum R48-27(NI1); L. buchneri R4-26(NI2); mixture of NI1 and NI2 at 1:1 ratio(MIX); and L. buchneri(LB). The rye forage was ensiled into 10 L bucket silo for 100 days. In vitro digestibility of dry matter and neutral detergent fiber were highest(p<0.05) in NI2 silage. The pH in NI2 and LB silages were lower(p<0.05) than CON silage. Lactate concentration was highest(p<0.05) in NI1 silage. While concentrations of acetate and propionate were highest(p<0.05) in MIX silage. Lactates : acetate ratio was highest(p<0.05) in NI1 silage, but lowest in LB silage. Butyrate concentrations of NI2 and LB silages were lower(p<0.05) than that in CON and NI1 silages. Lactic acid bacteria (LAB) count in all inoculated silages was higher(p<0.05) than that in CON silage, while yeast count in LB silage was lower than in CON, NI1, and MIX silages. In conclusion, application of NI2 inoculant could improve potentially fermentation quality and digestibility of high moisture rye silage.

The composition of the deicer sprayed on the highway is spreading over the highway by the scattering or snow removal activity, or car movement and consequently affecting the vegetation environment around the highway. These are the cause of the damage of fruit trees and crops, and also the cause of corrosion of highway structures. The goal of this study is to estimate the detected range of deicer components from a highway. The concentration of the deicer components in gauze and soil were investigated according to the crossing distance from the highway. The data collected were then used to estimate the concentration range of deicer components in a rage of distance up to 100 m from the highway where the deicer was spread. The sample time and weight of gauze were measured before and after installation, and the soil was collected at more than three points in parallel with the highway at the gauze installation point. The components in gauze and soil were investigated in addition to the deicer components (Ca2+, Na+, Cl-) as well as Mg2+ and K+. As Ca2+ and Cl- components of deicer were affected by agricultural use, Na+ component was selected as a tracer and further SAR (Sodium Adsorption Ratio) of soil was analyzed to examine the degree of influence on vegetation indirectly. The gauze concentration was evaluated by the concentration of the deicer ingredient at the background concentration of the blank gauze. The total amount of the deicer sprayed in the study road for 4 months (winter season) was about 93 ton/km. In the gauze test, the spread of the deicer was detected at a distance of 100 m in study area, but the concentration of the deicer in the gauze by distance decreased rapidly within 10 m from the highway. And concentration of the deicer components in gauze and soil came down after rainy season (August ~ Sep.). The results showed that the components of the deicer could be spread widely by the wind. The effective range of the deicer on vegetation based on SAR in soil was estimated to be less than 20 m from the highway. This study examines the concentration changes of the deicer components in gauze and soils and shows that deicer components sprayed on the highway are accumulated and moved over time by wind, snow removal, terrain, water system and land use around the highway.

This study was conducted to estimate the effect of home or hetero fermentative lactic acid bacteria(LAB) on chemical composition, fermentation quality, and aerobic stability of rye silage. Rye forage was harvested at dough stage(28.9% of dry matter), chopped to 3-5 cm length, and divided into 4 piles for different inoculations as treatment, following 1) No additives(CON); 2) Lactobacillus plantarum at rate of 1.5 x 105 cfu/g of fresh forage(LP); 3) L. buchneri at rate of 1.2 x 105 cfu/g of fresh forage(LB); and 4) Mixture of LP and LB at 1:1 ratio(MIX). Rye silage was ensiled into 20 L bucket silo in quadruplicate for 0, 1, 4, 7, and 100 day periods. After 100 days of ensiling, the silage treated with LB had lower acid detergent fiber content(p<0.05), but higher in vitro dry matter digestibility(p<0.05). The LB and MIX reduced (p<0.05) pH more rapidly than CON and LP across the ensiling days, but had no difference on 100 days. Silage treated LP had lowest(p<0.05) acetic acid, but highest(p<0.05) propionic acid. In contrast, LB treated silage had highest(p<0.05) acetic acid, but lowest(p<0.05) propionic acid with the absence of butyric acid. On microbial count, LP treated silage had lowest(p<0.05) LAB, yeast, and aerobic stability, whereas LB and MIX treated silages had highest(p<0.05). Mold was not detected across all silages. Therefore, it could be concluded that heterofermentative LAB solely or combo with homofermentative LAB might improve in vitro dry matter digestibility, fermentation characteristics, and aerobic stability of rye silage harvested at dough stage.

Subcutaneous emphysema is a rare but serious side effect of dental and oral surgery procedures. The condition is characterized by air being forced underneath the tissue, leading to swelling, crepitus on palpation, and with potential to spread along the fascial planes to the periorbital, mediastinal, pericardial, and/or thoracic spaces. A wide range of causes have been documented for the origin of subcutaneous emphysema during dental treatment including: crown preparations, other operative procedures, endodontic therapy, extractions, as well as oral surgery procedures. The patient was a 58-year-old woman who presented to the Seoul Saint mary’s hospital emergency department with a chief complaint of facial edema, dyspnea and chest discomfort after periodontal treatment using an air-flow equipment in local dental clinic. During treatment in the emergency department, oxygen therapy and intravenous injection of steroid and anti-histamine was done. it was noted that the patient had pain and swelling on left lower molar region, pus discharging on same site. Severe edema was observed on periorbital region to neck with heatness. An audible crepitus sound was heard during palpation on facial area. Neck CT scan and antibiotic therapy was done, as symptom suggesting dental abscess is observed. 3 hours after injection of antibiotics, the patient’s symptom was relieved, but she felt chest discomfort continuously. CT scan with constrast depicted confluent and extensive soft tissue emphysematous changes involving face and deep neck spaces and pneumomediastinum. The patient was refered to thoracic surgery department, oxygen therapy was decided continuously. After 10 hours, patient’s chief complaint was resolved, and discharged. After 1 week, all symptom was disappear and follow-up neck CT scan finding was disappearance of edema and pnuemomediastinum. We report a case of cervical subcutaneous emphysema and pneumomediastinum occurring after periodontal treatment using an air-flow equipment and case on the diagnosis and treatment of subcutaneous emphysema and pneumomediastinum, along with a review of the literature.

본 연구는 환경스트레스 저항성이 증진된 페튜니아를 개발하기 위하여 NDPK2유전자 도입 형질전환 계통 NDPK2-7-1와 SOD2 유전자 도입 형질전환 계통 SOD2- 2-1-1-35간의 교잡에 의해 획득된 후대들의 비생물적 스트레스 저항성을 조사하기 위해 수행되었다. 비 생물적 스트레스 유발원인 메틸바이올로젠(methyl viologen, MV) 100 μM과 200 μM 처리에서 교잡후대들은 그들의 교배 모본 SOD2 유전자나 NDPK2 유전자가 단독으로 도 입된 형질전환 계통이나 비형질전환체 보다 메틸바이 올로젠에 의한 피해를 적게 받았다. 이는 SOD2 유전 자나 NDPK2 유전자가 단독으로 도입된 형질전환 계 통간 교잡에 의해 획득된 후대들이 그들의 교배모본 (SOD2 유전자나 NDPK2 유전자가 단독으로 도입된 형질전환 계통)이나 비형질전환체 보다 산화적 스트레 스에 대한 저항성이 증진되었음을 증명해 준다고 할 수 있다. 이들 교잡후대들은 초장 등 11종류의 양적형질의 특성이 비형질전환체에 비해 약간 길거나 짧긴 하였지 만 비형질전환체와 거의 유사하였으며, 꽃 색갈이나 모양 또한 그들의 교배모본 (SOD2 유전자나 NDPK2 유전 자가 단독으로 도입된 형질전환 계통)이나 비형질전환 체와 차이가 없었다.

We have investigated the optical properties of the global haze on Titan from spectra recorded between 7100 and 9200Åwhere CH4 absorption bands of various intensities occur. The Titan spectra were obtained on Feb. 23, 2005 (UT), near the times of the Cassini T3 flyby and Huygens probe, using an optical echelle spectrograph (BOES) on the 1.8-m telescope at Bohyunsan Observatory in Korea. In order to derive the optical properties of the haze as a function of altitude, we developed an inversion radiative-transfer program using an atmospheric model of Titan and laboratory CH4 absorption coefficients available from the literature. The derived extinction coefficients of the haze increase toward the surface, and the coefficients at shorter wavelengths are greater than those at longer wavelengths for the 30 - 120 km altitude range, indicating that the Titanian haze becomes optically thin toward the longer wavelength range. Total optical depths of the haze are estimated to be 1.4 and 1.2 for the 7270 -7360Åand 8940 -9150Å ranges, respectively. Based on the Huygens/DISR data set, Tomasko et al. (2005) reported total optical depths of 2.5 - 3.5 at 8290Å depending on the assumed fractal aggregate particle model. The total optical depths based on our results are smaller than those of Tomasko et al., but they partially overlap with their results if we consider a large uncertainty from possible variations of the CH4 mixing ratio over Titan's disk. We also derived the single scattering albedo of the haze particles as a function of altitude: it is less than 0.5 at altitudes higher than ~150Km the average particle radius is smaller than the wavelengths, whereas near the surface, it becomes comparable or greater.

두부 CT 검사 시 일반적으로 검사 시 적용하는 스캔조건 및 알고리즘을 기준으로 선정 후 알고리즘 변 경 적용을 통한 선량감소효과를 실험을 통해 알아보고자 하였다. 그 결과 선량감소효과는 관전압 보다 관전류 변화 시 의미가 있었으며, 인체 팬텀을 이용한 화질 평가는 Smooth 알고리즘적용 후 선량을 감소 시 Bone 알고리즘적용 후 선량을 감소 시 보다 상대적으로 화질 감소가 적었으며, 특히 Bone 알고리즘적용 시 에는 평균 CT Number 또는 Pixel value의 편차가 상대적으로 크게 측정되었다. 즉 선량은 감소되고 화질은 유지하여 환자의 피폭 선량을 감소시키고 동일한 화질의 영상을 얻을 수 있는 조건은 Smooth 알고리즘 적용과 120 kVp, 160 mA라는 결과 값을 얻을 수 있었다. 이 때 선량은 약 28 % 감소되며 평균 CT Number 또는 Pixel value도 오차가 상대적으로 적게 측정 되었다. 향 후 스캔조건 및 다양한 알고리즘 적용 후 그 결과를 검진 또는 추적검사 등으로 내원한 환자에게 적용하여 검사 한다면 환자 피폭선량 감소에 있어 매우 유용할 것으로 사료된다.

본 연구는 병원 및 대학교 등에 설치된 X선 발생장치를 대상으로 진단용 방사선 발생장치의 품질관리 항목을 적용하여 성능 비교를 하여 주기적인 성능관리의 중요성을 인식시켜 성능유지 및 관리에 도움을 주고자 한다. 우선 재현성 및 직선성 실험결과 모든 실험조건에서 합격기준에 부합되었으며 주기적인 정도관리가 부족한 GX-650장치의 경우 재현성 평가의 백분율 오차가 높았으며 직선성 평가에서는 관전압을 100 kVp로 설정 시 0.105로 백분율 오차에서 벗어나게 측정되었다. 또한 관전압 및 관전류의 정확도 평가결과 상대적으로 X선 발생횟수가 낮은 장치에서 백분율 오차가 낮은 것을 알 수 있었다. 반가층 실험은 모든 장치에서 관전압 별 반가층 기준에 모두 포함되었다. 따라서 병원용, 실습용 구분보다는 모든 장치의 정도관리의 중요성을 인식하고 적극적으로 장치의 성능관리를 시행하여 장치를 유지 관리해야 할 것이며 특수의료장비처럼 짧은 주기의 정도관리 제도를 마련해야 할 것으로 사료된다.

고무화합물 형태로 구성된 조영제의 병에 Syringe Connector의 Spike를 연결 시 고무의 찢김 정도를 알아보고 찢김 및 분쇄로 인한 합성고무의 혼입 유무와 분쇄된 합성고무가 검출 시 분쇄물의 크기를 실험을 통해 알아보고자 하였다. 그 결과 찢김 정도의 경우 Syringe Connector의 끝과 최초 접촉하는 앞면이 약 3.14±0.04 ㎜로 뒷면 보다 많이 찢겼으며, 실험 대상인 10 병의 조영제에서 평균 7 개에서 15 개로 모두 분쇄물이 검출되었다. 검출된 분쇄물을 이용하여 크기를 측정한 결과 평균크기는 약 7.89±0.31 ㎛이었다. 향 후 다양한 실험 및 분석방법을 통한 추가실험과 더불어 흡인된 분쇄물 차단을 위한 미세 필터타입 자동주입장치의 개발이 필요하며, 분쇄물 유입 시 치명적 사고를 대비하여 관련기관의 관심 또한 필요할 것으로 사료된다.

안면부 CT검사 시 치아교정용 충전물과 주변 해부학적 구조와의 밀도차이에 의해 발생한 화질 저하 정 도와 화질개선 방향을 실험을 통해 정량 및 정성적 분석방법을 통해 알아보고자 하였다. 실험은 64-MDCT (Discovery 750 HD, GE HEALTH CARE, Milwaukee, USA)를 사용하여 치아 충전물로 교정한 치아를 스캔 하였으며 관전압 변화, 실리콘 적용, MAR 알고리즘 적용 유무에 따라 비교하였다. 그 결과 관전압 변화 시 140 kVp에서 10.36 % CT value가 감소하였으며, Silicon 물질 적용 시 약 5.81 %가 감소하여 감소율이 가장 적었다. 정성적 평가결과 MAR 알고리즘 적용 시 관찰자 10명 중 Equivalent가 7명, Acceptable로 3명이 평가하여 MAR 알고리즘 적용 시 상대적으로 가장 화질 개선 효과가 있다고 평가되었다. 따라서 현재 임상 에서 사용하고 있는 검사 파라미터와 더불어 고밀도 인공물을 감소시킬 수 있는 다양한 알고리즘을 적용 하여 스캔 한다면 방사선 피폭선량에 대한 불필요한 부담을 줄일 수 있을 뿐만 아니라 고밀도 인공물을 감 소시켜 영상 데이터의 소실을 줄여 보다 많은 영상정보를 제공 할 수 있을 것으로 사료된다.