The initial development plans for the six reactor designs, soon after the release of Generation IV International Forum (GIF) TRM in 2002, were characterized by high ambition [1]. Specifically, the sodium-cooled fast reactor (SFR) and very-high temperature reactor (VHTR) gained significant attention and were expected to reach the validation stage by the 2020s, with commercial viability projected for the 2030s. However, these projections have been unrealized because of various factors. The development of reactor designs by the GIF was supposed to be influenced by events such as the 2008 global financial crisis, 2011 Fukushima accident [2, 3], discovery of extensive shale oil reserves in the United States, and overly ambitious technological targets. Consequently, the momentum for VHTR development reduced significantly. In this context, the aims of this study were to compare and analyze the development progress of the six Gen IV reactor designs over the past 20 years, based on the GIF roadmaps published in 2002 and 2014. The primary focus was to examine the prospects for the reactor designs in relation to spent nuclear fuel burning in conjunction with small modular reactor (SMR), including molten salt reactor (MSR), which is expected to have spent nuclear fuel management potential.

When occurring at a nuclear power plant (NPP) by accidents, accurate prediction and identification of the process of radioactive material dispersing into atmosphere is important to protect public and environment. Atmosphere dispersion of radioactive materials is significantly influenced by wind direction and wind speed. The government and nuclear operator continuously monitor wind data at nuclear sites through meteorological tower to prepare for such accidents involving the release of radioactive materials. The purpose of this study is to construct wind rose diagrams at 5 NPP sites (Kori, Saewool, Wolsong, Hanbit, Hanul). Wind roses serve as invaluable tool for identifying wind patterns in each region and visualizing wind directions. This can be utilized to predict the dispersion pathway and extent range of radioactive materials carried by the wind. This program will take on the role of establishing appropriate evacuation routes or shelter locations for residents when reliable wind data is not immediately available during an NPP accident. The wind data used in the study was collected from a meteorological tower located at the NPP site, and measurements were taken at 1-hour intervals for each operation over a period of ten years. The collected data underwent preprocessing, followed by the development of Python code to render the wind rose diagrams in an interpretable format. The future direction of this study will be focused on enhancing this program by integrating geographical mapping capabilities. With these advancements, it will become feasible to superimpose shelter positions on a map in accordance with prevailing wind directions. These improvements will contribute to the development of additional protective measures for residents and the proposal of alternative shelter options in response to potential radioactive material releases.

The domestic Pressurized Heavy Water Reactor (PWHR) nuclear power plant, Wolsong Unit 1, was permanently shut down on December 24, 2019. However, research on decommissioning has mainly focused on Pressurized Water Reactors (PWRs), with a notable absence of both domestic and international experience in the decommissioning of PHWRs. If proper business management such as radiation safety and waste is not performed, it can lead to increased business risks and costs in decommissioning. Therefore, the assessment of waste volume and cost, which provide fundamental data for the nuclear decommissioning process, is a crucial technical requirement before initiating the actual decommissioning of Wolsong Unit 1. Decommissioning radiation-contaminated structures and facilities presents significant challenges due to high radiation levels, making it difficult for workers to access these areas. Therefore, technology development should precede decommissioning process assessments and safety evaluations, facilitating the derivation of optimal decommissioning procedures and ensuring worker safety while enhancing the efficiency of decommissioning operations. In this study, we have developed a program to estimate decommissioning waste amounts for PHWRs, building upon prior research on PWR decommissioning projects while accounting for the specific design characteristics of PHWRs. To evaluate the amount of radioactive waste generated during decommissioning, we considered the characteristics of radioactive waste, disposal methods, packaging container specifications, and the criteria for the transfer of radioactive waste to disposal operators. Based on the derived algorithm, we conducted a detailed design and implemented the program. The proposed program is based on 3D modeling of the decommissioning components and the calculation of the Work Difficulty Factor (WDF), which is used to determine the time weighting factors for each task. Program users can select the cutting and packaging conditions for decommissioning components, estimate waste amount based on the chosen decommissioning method, and calculate costs using time weighting factors. It can be applied not only to PHWRs, but also to PWRs and non-nuclear fields, providing a flexible tool for optimizing decommissioning process.

With the aging of nuclear power plants (NPPs) in 37 countries around the world, 207 out of 437 NPPs have been permanently shutdown as of August 2022 according to the IAEA. In Korea, the decommissioning of NPPs is emerging as a challenge due to the permanent shutdown of Kori Unit 1 and Wolsong Unit 1. However, there are no cases of decommissioning activities for Heavy Water Reactor (HWR) such as Wolsong Unit 1 although most of the decommissioning technologies for Light Water Reactor (LWR) such as Kori Unit 1 have been developed and there are cases of overseas decommissioning activities. This study shows the development of a decommissioning waste amount/cost/process linkage program for decommissioning Pressurized Heavy Water Reactor (PHWR), i.e. CANDU NPPs. The proposed program is an integrated management program that can derive optimal processes from an economic and safety perspective when decommissioning PHWR based on 3D modeling of the structures and digital mock-up system that links the characteristic data of PHWR, equipment and construction methods. This program can be used to simulate the nuclear decommissioning activities in a virtual space in three dimensions, and to evaluate the decommissioning operation characteristics, waste amount, cost, and exposure dose to worker. In order to verify the results, our methods for calculating optimal decommissioning quantity, which are closely related to radiological impact on workers and cost reduction during decommissioning, were compared with the methods of the foreign specialized institution (NAGRA). The optimal decommissioning quantity can be calculated by classifying the radioactivity level through MCNP modeling of waste, investigating domestic disposal containers, and selecting cutting sizes, so that costs can be reduced according to the final disposal waste reduction. As the target waste to be decommissioning for comparative study with NAGRA, the calandria in PHWR was modeled using MCNP. For packaging waste container, NAGRA selected three (P2A, P3, MOSAIK), and we selected two (P2A, P3) and compared them. It is intended to develop an integrated management program to derive the optimal process for decommissioning PHWR by linking the optimal decommissioning quantity calculation methodology with the detailed studies on exposure dose to worker, decommissioning order, difficulty of work, and cost evaluation. As a result, it is considered that it can be used not only for PHWR but also for other types of NPPs decommissioning in the future to derive optimal results such as worker safety and cost reduction.

Once a radioactive material is released from the nuclear power plant (NPP) by accident, it is necessary to understand the behavior of radioactive plume to protect residents adequately. For this, it is essential to measure the radiation dose rate around NPPs at important locations. Our previous study developed a movable radiation detector that can be installed quickly in an accident to measure gamma dose rate in areas where environmental radiation monitoring system is not installed. The data measured by the detector are transmitted to the server in real-time through LoRA wireless communications. There are two methods to use LoRA communications; one is self-network, and the other is the network provided by the mobile carrier. A signal receiver, called a gateway, should be equipped near the installation location of radiation detectors to use a self-network without using the mobile carrier’s system. In other words, the movable radiation detectors we made can function if there should be any gateway near them. The distance capable of communication between gateway and detector is about 8 km in an open area without significant obstacles. Korea has many significant obstacles, such as mountains around most NPPs. Thus, the gateways could be installed in the proper position before the accident to operate the movable radiation detectors without problems. If the gateway is located at a high position like a mountain top, it could cover a wide area. In this study, the elevation database in the area around the NPPs was collected and analyzed to determine where gateways should be installed. The analysis range is limited in the urgent protective action planning zone. The optimization was also performed to minimize the number of gateways.

본 논문에서는 고리 1호기 해체 비용 추정을 위해 외국 원자력발전소 해체 비용 데이터를 현가화한 후 원자력발전소 해체 비용 추정 회귀 분석모델을 개발하였다. 이 모델 개발에 사용된 데이터는 해체 또는 진행 중인 BWR 13기, PWR 16기의 해체 비용 데이터이다. 회귀 분석모델 도출을 위해, 해체 비용을 종속변수로 정하고, 해체 원전의 운전 특성을 반영할 수 있게 고 안된 Contamination factor와 해체 기간을 독립변수로 선정하였다. 빅데이터 분석 도구인 R language의 통계패키지를 이용 하여 회귀 분석모델을 도출하였다. 이 회귀 분석 모델을 적용하여 고리 1호기 해체 비용을 예측한 결과, 미화 663.40~928.32 백만 달러, 한화 약 7,828.12억~1조 954.18억 원이 소요될 것으로 예측되었다.

In this study, the effects of heat-moisture treatment (boiling or steaming for 45 min) prior to hot air drying (70 o C for 8 h) on water activity (Aw), moisture (MC), Brix, color, and texture of dried sweet potato slices were investigated to identify the best pretreatment condition for producing dried sweet potato with the best eating quality. Dried sweet potato slices pretreated by boiling (BL) showed significantly lower Aw, MC, and hardness while Brix was significantly higher than with steaming (ST) treatment. There were no significant differences for the color, springiness, cohesiveness, gumminess, and brittleness indexes. At 8 h drying, the Aw, MC, Brix, and hardness of the BL and ST samples were 0.81 and 0.82, 19.71% and 25.53%, 53.80% and 49.40%, and 20.49 kg/cm 2 and 31.98 kg/ cm 2 , respectively. This information will be useful for manufacturers in the production of dried sweet potato slices. These findings provide evidence of the feasibility of heat-moisture treatments in the production of dried sweet potato.

본 연구의 목적은 유도 허벅다리걸기 기술 발휘 시 발목 관절의 테이핑 처치가 하지 관절과 압 력중심(COP, center of pressure)에 미치는 영향을 분석하는데 있었다. 대학 유도 선수 20명(연령, 20.9±0.8세; 신장, 168.6±7.4cm; 체중, 73.5±11.6kg; 신체질량지수, 25.7±2.6kg/m2)이 참여하였으며, 발목 관절 테이핑 처치 전과 후의 2가지 조건에서 허벅다리걸기 기술 발휘 시 지지다리 관절의 각도와 압 력중심 요인을 분석하여 다음의 결과를 도출하였다. E2(t=2.411, p=.027) E4(t=2.388, p=.029)시점에서 발목 관절의 각도는 테이핑 처지 전에 비해 처치 후 발목의 각도가 통계적으로 적은 수치를 나타내었고, E2(t=-2.343, p=.032) E3(t=-4.531, p=.000)시점에서 힙 관절의 각도는 통계적으로 크게 나타났다. 그리 고 발목 관절 테이핑 처치 후 좌·우의 COP 이동은 상대를 메치는 P3 국면에서 통계적으로 크게 나타났으 며(t=2.670, p=.016), 전·후의 COP 이동은 상대의 무게 중심을 기울이는 P1 국면에서 통계적으로 적은 수 치를 나타내었다(t=2.846, p=.011). 그러므로 허벅다리걸기를 특기로 사용하는 유도 선수들은 발목 관절 테이핑으로 인해 발생하는 지지관절의 운동 기능과 COP의 이동범위를 고려하여 사용하는 것에 대하여 제 안하고자 한다.

To develop flexible adsorbents for compact volatile organic compound (VOC) air purifiers, flexible as-spun zeolite fibers are prepared by an electrospinning method, and then zeolite particles are exposed as active sites for VOC (toluene) adsorption on the surface of the fibers by a thermal surface partial etching process. The breakthrough curves for the adsorption and temperature programmed desorption (TPD) curves of toluene over the flexible zeolite fibers is investigated as a function of the thermal etching temperature by gas chromatography (GC), and the adsorption/desorption characteristics improves with an increase in the thermal surface etching temperature. The effect of acidity on the flexible zeolite fibers for the removal of toluene is investigated as a function of the SiO2/Al2O3 ratios of zeolites. The acidity of the flexible zeolite fibers with different SiO2/Al2O3 ratios is measured by ammonia-temperature-programmed desorption (NH3-TPD), and the adsorption/desorption characteristics are investigated by GC. The results of the toluene adsorption/desorption experiments confirm that a higher SiO2/ Al2O3 ratio of the flexible zeolite fibers creates a better toluene adsorption/desorption performance.

Pesticide application in agriculture provides significant benefits such as protection from disease, prevention of harmful insects, and increased crop yields. However, accurate toxicological tests and risk assessments are necessary because of many related adverse effects associated with pesticide use. In this review, we discuss and analyze residual pesticides contained in livestock feed in Korea. A pesticide residue tolerance standard for livestock feed has not been precisely established; so, risk assessments are required to ensure safety. Standards and approaches for animal criteria and appropriate methods for evaluating residual pesticides are discussed and analyzed based on technology related to animal product safety in Korea. The safety of livestock feed containing pesticides is assessed to establish maximum residue limits relative to pesticides. Analysis of residual pesticides in milk, muscle, brain, and fat was performed with a livestock residue test and safety evaluation of the detected pesticide was performed. Efficacy of organic solvent extraction and clean-up of feed was verified, and suitability of the instrument was examined to establish if they are effective, rapid, and safe. This review discussed extensively how pesticide residue tolerance in livestock feed and hazard evaluation may be applied in future studies.

The purpose of this study was to analyze the biomechanical differences of lower extremity joints of the frontal plane during sidestep cutting in male and female Judo athletes. In the knee and hip joint, the female group showed a smaller angle than the male group at the time of IC(initial contact). But peak knee joint adduction moment of female group was greater than male group(p<.05). Therefore, female Judo athletes were more likely to injure their knees at the point where their initial foot contacted the ground than male athletes during sidestep cutting.

This study was carried out to investigate the management characteristics and techniques by comparing and analyzing the process of mixing, sterilization, cooling, inoculation and incubation for bag cultivation of L. edodes. The medium was sterilized after mixing it for 30 minutes, 1 and 2 hours respectively. The general moisture content of the sawdust substrate has been adjusted to 65%, while the case of the L. edodes substrate was 55%. Only 5% of wood chips of 5-8 mm in particle size were mixed to secure the space of the sawdust particles. As a result, mycelial growth was 1.4cm faster and the density was better(+++) than control(++). Wood chips are soaked in advance for a week during winter and 4 days during summer. There is an average number of 1.6x108 (cfu) of microorganisms in the sawdust that has been piled for six months outdoor. In summer, it has to be used immediately after mixing sawdust. High-pressure sterilization should be performed to use as a mushroom spawn, and to improve physical properties, it was great to sterilize the medium at a normal-pressure. There are height and width type for bags to be consumed for bagging. When the height was reduced into 17cm and the width was increased into 13cm, the browning period was shortened by 30 days and the period of mycelial growth was shortened by 25 days. The sterilized medium had an average of 4x103(cfu) of microorganisms at 25°C and 1.3×102 (cfu) at 15°C. After 25 days from inoculation in vitro, the growth condition of sawdust was the best with 13.2 cm, followed by grain spawn and liquid respectively. When inoculated with liquid spawn, the moisture content of substrate should be adjusted to 55% to 50% in advance.

배추좀나방과 담배거세미나방 유충에 대한 30종 한방 식물체 메탄올 조추출몰의 살충활성 및 섭식 저해활성을 잎침지법을 이용하여 5,000ppm으로 검정하였다. 황련의 추출물은배추좀나방에 대해 살충작용을 보였다. 길경, 사삼, 세신, 오배자 및 자초의 추출물은 배추좀나방 유충에 대해, 목통 및 속새의 추출물은 담배거세미나방 유충에 대한 강한 섭식저해활성을 보였으나, 오배자와 황련의 추출물은 이들 나비목 유충 모두에 강한 섭식저해활성을 나타내었다.

The reduced profiles of C 2 5150.56, CN 3864.32, MgH 5150.20 and FeI 5150.84 lines, representing the penumbra, the penumbra-umbra boundary and the umbra of spa 6403 have been analyzed by comparing them with the synthetic profiles computed from a set of umbral and penumbral models. The results are presented and discussed. It is suggested that there may be a significant lateral flow of pbotospheric radiation into the umbral and penumbral regions of the sunspots.