Climate change has led to increased insect pests and pest distribution changes. Traditionally, chemical control using synthetic pesticides has been the main method for pest management, but the emergence of pesticide-resistant pests has become a problem. There is a need to develop new pest control agents to overcome these issues. Entomopathogenic fungi used in pest management have minimal environmental side effects and possess a mechanism of action distinct from that of synthetic pesticides. However, there is a need for the development of technologies to maximize the insecticidal effects of fungi against pests, and expressing and releasing dsRNA within the fungi can preemptively knock out the activation of the insect’s defense system, thereby enhancing the insecticidal effect. Controlling insect defense genes and using entomopathogenic fungi as bio-carriers forms a new pest management strategy. This approach, described as a “microbial insecticide agents development strategy of cassette concept, ” can versatilely modify genes and microbes. It is expected to overcome the limitations of synthetic pesticides.

Since rice is the main food in Korea, there are no regulations on corn milling yet. Corn is known as one of the world's top three food crops along with wheat and rice, and it is known that 3.5 billion people worldwide use corn for food. In addition, corn mills are not developed or sold in Korea, but the use of corn mills is increasing significantly in many countries in Southeast Asia. In the Philippines, as Korea's rice mill import increases, Korea's KAMICO (Korea Agricultural Machinery Industry Cooperative) and domestic company A agreed to develop a corn mill jointly with PHilMech, an organization affiliated with the Philippine Ministry of Agriculture. However, research on corn milling was very insignificant, so the development was carried out based on the technology of Korea's rice mill. Rice milling is performed by peeling off the skin of rice and producing brown or white rice, so it is carried out by removing the skin and cutting the skin. On the other hand, in the corn mill, the skin of the corn is peeled, pulverized and selected to produce main products suitable for edible use. Therefore, in order to develop a corn mill, processes such as peeling, transfer, grinding, sorting, and by-product separation are required, and suitable parts must be developed. In addition, the performance must be gradually improved through experiments in which corn is repeatedly milled. The Philippines produces 7.98 million tons/year of corn, which is about 100 times that of Korea, and is mostly consumed as a staple food. This is about 10% of the total crop production in the Philippines. In addition, the main cultivation complexes of corn are the mountainous regions of Tarlac or Pangasinan, and the produced corn is 72.4% of the so-called yellow corn called Arabel and Sarangani, and the remaining 27.6% are known as white corn. In this study, it was intended to produce grains of 2.5 mm or less suitable for food for yellow corn and to develop a corn mill for 200 kg per hour. Detailed conditions for development are stipulated as more than 55% of the main product recovery rate, more than 31% of the by-product recovery rate, less than 5% of the raw material loss rate, and more than 80% of the embryo dislocation rate. In this study, to achieve this, the overall process of the corn mill was developed, and the optimal conditions for the corn mill were obtained through the development of parts and empirical tests to improve performance. In addition, it was intended to achieve the development goal by evaluating and analyzing the performance of each part so that it did not conflict.

The genus Silpha Linnaeus, 1758 in Silphinae includes 33 species worldwide. This group is flightless and known to feed on invertebrate carcasses from the ground surface. In South Korea, 3 species have been recorded, and S. koreana Cho& Kwon, 1999 is an endemic species, distributed only Mt. Taebaek and Mt. Mindung. Up to date the immature stages of the species has never been studied although the species has significant value as an endemic species. The present study is the very first one ever conducted describing the larval morphological characters of S. koreana along with images of larval stages. Furthermore, we report observations on developmental lengths for each stages of the species.

모기는 감염병을 매개하는 종으로 전염병 확산 억제를 위해서는 개체수의 감시와 정확한 예측이 필요하다. 본 연구에서는 모기 개체수 및 기상 및 현장 자료를 활용해 모기 개체수 머신러닝 모델을 개발하였다. 모기 개체수는 디지털 모기 측정기(Digital Mosquito Monitoring System, DMS)의 2015 년~2022년의 5월~10월의 자료를 활용하였다. 기상 자료는 기온, 강수량, 풍속, 습도를 사용하였으며, 현장 조사 자료는 현장을 명목척도와 서열척도로 나누어 기록하여, 명목 척도의 경우 원핫 인코딩으 로 변환해 수치화하여 사용하였다. 분석에 사용된 머신러닝 모델은 Artificial Neural Network, Random Forest, Gradient Boosting Machine, Support Vector Machine이며 성능지표로 R2, RMSE를 사용하였다. 연구 결과, Gradient Boosting 모델이 R2 0.4, RMSE 22.45로 가장 좋은 성능을 나타냈다. 현장 조사 자료 를 분석에 활용하였을 때 R2는 증가하였고, RMSE는 감소하였다. 본 연구 결과 모기 개체수에 현장 조사 자료가 예측 정확도를 향상시킬 수 있음을 확인하였다.

분화국화 ‘솔라에그(등록번호 8569)’는 2015년 경상남도농 업기술원 화훼연구소에서 분홍색 ‘포인트에그’를 감마선 처리 를 하여 육성하였다. 특성검정과 형질 안정성은 2017년에서 2018년까지 3회를 수행하였다. ‘솔라에그’는 분홍색 꽃잎(54D) 과 적자색 중심부(59B)를 가진 ‘아네모네’ 형태이다. 꽃과 잎 색깔과 모양에서는 ‘솔라에그’와 ‘포인트에그’ 간의 차이는 거 의 없었다. ‘솔라에그’의 식물체와 개화 연구에서 조명과 억제 재배를 했을 때 약 42일로 개화소요시간은 비슷했다. 그러나 초장, 꽃 크기, 꽃 중심부 크기와 착화수에서 ‘포인트에그’와 비교했을 때 차이가 있었다. 특히, 자연재배조건에서 꽃 크기 는 4cm으로 대조품종과 비교했을 때 컸다. 국화 품종에서는 꽃의 크기가 상업적으로 중요한 형질이다. ‘솔라에그’의 표현 형과 개화기 연구와 비교하여 배수성, RAPD, 세포 크기 및 수 분석을 하였다. 이들 결과에서는 표현형의 변화는 작은 유전 적 변이와 세포 분열 증가와 관련이 있을 것이라고 추정하고 있다. 중형 크기의 ‘솔라에그’는 분화국화로 이용되며 농가의 평균소득 증대를 기대할 수 있다.

The present study investigated effects of antifungal and carboxylesterase inoculant on rumen fermentation with different rumen pH. Corn silage was treated without inoculant (CON) and with a mixed Lactobacillus brevis 5M2 and L. buchneri 6M1 (MIX). Rumen fluid was collected from two cannulated Hanwoo heifers before morning feeding (high rumen pH at 6.70) and 3 h after feeding (low rumen pH at 6.20). Dried corn silage was incubated in the rumen buffer (rumen fluid + anaerobic culture medium at 1:2 ratio) for 48 h at 39oC. Eight replications for each treatment were used along with two blanks. Both in a high and a low rumen pH, MIX silages presented higher (p<0.05) the immediately degradable fraction, the potentially degradable fraction, total degradable fraction, and total volatile fatty acid (VFA) than those of CON silages. Incubated corn silages in a low rumen pH presented lower (p<0.05) total degradable fraction, ammonia-N, total VFA (p=0.061), and other VFA profiles except acetate and propionate, than those in a high rumen pH. The present study concluded that application of antifungal and carboxylesterase inoculant on corn silage could improve degradation kinetics and fermentation indices in the rumen with high and low pH conditions.

Roads in Korea are equipped with PMS (Pavement Management System) computation data that runs on highway, national highway and municipal road. PMS is a program that selects and manages the road pavement optimal maintenance alternative as a indicator of the road pavement structural and functional performance. PMS is a system that has been developed for the primary purpose of maintaining the structural performance of road pavement, and so far does not include any indicators associated with the safety of road users. However, the road cave-in, which have recently become an issue on social networking sites, mass-media, and other issues, should pose systematically because it can make a safety risk to road users, and in particular lead to the structural and functional failure of the PMS program in view of the road pavement. Accordingly, this research has developed a practical use case for developing an integrated road cave-in management program based on the results of various studies on the exploration, analysis, assessment and handling of the existing road cave-in in Korea.

Pine wood nematode (PWN), Bursaphelenchus xylophilus causes devastating damage to pines worldwide. To develop new agent for controlling PWN, alkyloxyalcohols(A-H) were synthesized and nematicidal activity was tested against PWN. As a control, monochamol, which reported to have nematicidal activity was also tested. The nematicidal activity was diffferent according to carbon chain length in compounds. LC50 values of F, G and H were as same as that of monochamol. However A-E which have shorter carbon length than F-H showed weak nematicidal activity.

We carry out the study of 850 μm sources in a part of the XMM-LSS field. The 850 μm imaging data were obtained by the SCUBA-2 on the James Clerk Maxwell Telescope (JCMT) for three days in July 2015 with an integration time of 6.1 hours, covering a circular area with a radius of 15′. We choose the central area up to a radius of 9.′15 for the study, where the noise distribution is relatively uniform. The root mean square (rms) noise at the center is 2.7 mJy. We identify 17 sources with S/N > 3.5. Differential number count is estimated in flux range between 3.5 and 9.0 mJy after applying various corrections derived by imaging simulations, which is consistent with previous studies. For detailed study on the individual sources, we select three sources with more reliable measurements (S/N > 4.5), and construct their spectral energy distributions (SEDs) from optical to far-infrared band. Redshift distribution of the sources ranges from 0.36 to 3.28, and their physical parameters are extracted using MAGPHYS model, which yield infrared luminosity LIR = 1011.3−1013.4 L⊙, star formation rate SFR = 101.3−103.2 M⊙yr−1 and dust temperature TD = 30−53 K. We investigate the correlation between LIR and TD, which appears to be consistent with previous studies.

We carry out 100-GHz band test observations with the newly-constructed KVN 21-m radio telescopes in order to evaluate their performance. The three telescopes have similar performance parameters. The pointing accuracies are about 4" rms for the entire sky. The main beam sizes are about 30" (FWHMs), which is nearly the diffraction limit of the telescopes at the observing frequency (97 GHz). The measured aperture and main-beam efficiencies are about 52% and 46%, respectively, for all three telescopes. The estimated moon efficiency is ~84% for the KVN Tamna telescope. The first sidelobes appear 50" (~1.6 xFWHM) from the main beam centers and the levels are on average -14 dB.

The purpose of this study is to investigate the effects of group exer˗ cise program on depression in the elders with dementia. Subjects of this research were selected from the patients of Hyoja hospital(Yong˗ in, Korea). They were elders with dementia having minor to moderate degrees of cognitive function. Twenty-four subjects were randomly assigned into two groups, each with 12 people; exercise group and the control group. The control group only performed general physio˗ therapy, while the exercise group performed exercise program and general physiotherapy for 8 weeks. Depression of the exercise group and the control group were measured at baseline before the study, at 4 weeks, and at 8 weeks after the study. Depression was measured by Geriatric Depression Scale Short Form Korea Version(GDSSF-K). Firstly, when comparing the levels of depression within the same group, depression was significantly lower in the exercise group, after the group exercise program. However, depression of the control group did not show significant changes before or after the study. Secondly, when comparing the levels of depression of the control group and the exercise group, differences between the levels meas˗ ured before the study and 8 weeks after the study, was a statistically significant decrease of depression. Thirdly, effects of group exercise program according to the applied period were analyzed showing 8 weeks of group exercise to be more beneficial than 4 weeks. People who performed continuous group exercise program showed decrease in depression compared to the absence of group exercise program. This can infer beneficial effects of group exercise program. Group exercise program had desirable influence on decreasing the level of depression.