Six taxa of unrecorded Korean species of charophytes are described. Freshwater and aerial charophytes were collected from the bark of trees, reservoirs, small ponds and swamps from April 2017 to September 2017. The newly recorded species of Korea were Cosmarium quadrifarium f. octastichum, Euastrum turneri, Spondylosium nitens var. triangulare, Staurastrum kouwetsii, Staurodesmus dickiei var. latus, and Klebsormidium subtile. K. subtile was transferred from Stichococcus subtilis.

In 2017, the freshwater algae were collected from reservoirs, small ponds, soil, and rocks in Korea. Eight taxa of Chlorophyta (Chlorophyceae and Trebouxiophyceae) have been newly reported in Korea. The unrecorded indigenous species were Chlorolobion braunii, Coelastrum pseudomicroporum, Coelastrum reticulatum var. cubanum, Monoraphidium nanum, Tetrachlorella incerta, Ecdysichlamys obliqua, Gloeotila scopulina, and Stichococcus jenerensis.

Phalaenopsis ‘Blanc Rouse’ 품종은 국립원예특작과학원에서 2013년도에 육성한 신품종이다. 이 품종은 2007년에 백색 바탕에 분홍색의 소형 P. ‘KV 600’ 품종을 모본으로 하고 진한 핑크색의 P. ‘Kang 1’ 품종을 부본으로 교배시킨 후대 계통 중에서 선발하였다. 2010년에 화색, 초장, 화경 및 식물체의 생육상태 등을 고려하여 1차 선발 후 2013년에 2차 특성검정을 통하여 품종의 안정성과 균일성을 확인하고 ‘Blanc Rouse’로 명명하였다. 이 품종은 흰색바탕에 자주색 순판을 가졌으며 꽃 가운데 분홍색의 줄무늬가 크게 형성되어 있는 품종이다. 화형은 꽃잎과 꽃받침이 평편한 모양이고 꽃의 길이와 폭은 4.3cm, 4.8cm로 소형이다. 꽃대가 평균 2개 발생하며 복총상 화서로 화서당 꽃 수가 39.4개로 볼륨이 있어 소형분화에 적합하다. 자연 개화시기는 11월 하순으로 개화가 빠른 조생종 이다. 잎의 길이와 폭은 각각 17.3, 6.2cm이며 엽형은 수평이다. 기내 증식력이 높고 변이가 거의 없으며 내병성이 강하여 재배관리가 용이하다.

Composite resins are developed as restorative materials to improve esthetics and mechanical properties. To improve the physical properties of resin material, resin filler have to be added. However, no imaging method is adopted for resin filler distribution. Optical coherence tomography (OCT) is a optical imaging technique to delineate microscopic structures within biological tissue. The OCT application to dental composites resin and its filler is not described yet. So, this new and advanced optical method is needed for clinical application for evaluation of dental composite resin. To analyze the spatial distribution of dental composite resin and to evaluate the resin restoration in cavity, frequency domain optical coherence tomography (FD-OCT) was used for their analysis. Resin restored tooth was prepared. For morphological observation, serially sectioned teeth, conventional X-ray taking and micro computed-tomography (CT) images were compared with OCT images. The experiment has done to evaluate the success of the resin restoration using 3 dimensional structure OCT image. In this research, OCT is evaluated as a new technique to image resin restoration. The evaluation of resin restored tooth was performed by OCT. Inappropriate restoration such as marginal adaptation, large porosities, internal integrity and poor contour could be detected. Resin filler also could be checked by OCT. The distribution, number, regularity and size of resin filler can be differentiated from several commercial products. Considering the characteristics of the OCT, it can be used to evaluate the defects of resin restoration, resin filler distribution, and internal integrity between resin material and tooth structure. The OCT can be considered to be a new and advanced method for the evaluation of resin restorations.

The process of Apparel Product Development requires several major steps such as Pattern Digitizing, Grading, Marker Making, and Cutting Out. The current operation for Pattern Digitizing is conducted operators who amend apparel patterns on a computer after digitizing them based on a point-input method. The current process is laborious, time-consuming, and expensive due to error-prone work that leaves much to be desired in solution expansion. These studies develop an automated system for apparel pattern input based on vectorising technique. Supporting industrial standardization (the detailed targets for the system development) minimizes the involvement of operators and include: automatic recognition of pattern domain, automatic recognition of sample shape, and inner part recognition performing apparel characteristic function. The following picture shows an example using our system developed with a women bra pattern. Figure 2 represents women a bra pattern Figure 3 represents data implemented on the automated system we developed The results of our study : 1. Analytical speed: under 4 seconds in resolution 150 dpi, image size A3. 2. Length error: under 0. 2mm. 3. Outline: 100% extract of outlines cutting and marker pattern. 4. Pattern elements: classification automatically and editing available by user. 5. Pattern division: try one acting scanning various pattern. 6. Data entry/output: converting of DXF, AAMA, TIP, DIGIT. We developed an automated system based on vectorising software for implementation of apparel patterns. The cost of effective system repeatedly processes digitizing tasks with high quality in a few minutes. The system will contribute to the apparel industry field by implementing automatic steps for recognition and classification pattern.

The aim of this study was to carry out the comparative analysis of the brushing force following various brushing techniques bytoothbrush mounted pressure sensing unit. The study group consisted of 10 dental hygienist participants. The brushing forces (on buccal area of each first molar) were monitored on 8 different kinds of brushing techniques; Fones, Bass, Rolling, Scrub, Charters, stillman, Modified bass and Modified stillman. In Bass, Charters, Fones and Scrub method, force distributions showed a small gap of maximum and minimum value (Max/Min) while a big difference was noted in Modified bass, Modified stillman, Rolling and Stillman methods. Especially, the biggest difference of Max/Min value was observed in the area of lower left first molar. In conclusion, highly delicate manual skill is needed in showing big error range of force distribution. It means that careful force needs to be focused during toothbrushing instruction when a delicate manual skill was carried out.

The aim of this study was to investigate the correlation among bone mineral density(BMD), body composition and body circumference on 20's college women in Hwaseong. A total of 86 subjects were measured with BMD and body composition and body circumference. To evaluate the correlation between BMD and body composition, bone density and body weight, body mass index(BMI), lean body mass, muscle mass, fat mass and body fat mass were compared. The results of this study, weight was considered the strong correlation with BMD than the height and BMI seems to be greater significance rather than the lumbar spine and femur BMD. In addition, the relationship between body composition and BMD, lean body mass, muscle mass, body fat mass were the most relevant factors and BMD. The relationship between BMD and body circumference that have been difficult because of not enough previous studies but somewhat the study showed that association.

Cellular imrnortali zation is thought to be an ear ly event during tumorigenesis. Telomerase reacLi vaLion by ecLopic hTERT expression is widely used for cellular imrnortali zation. This study was a imed Lo a na lyze establi sh immortalized human ora l epithelial cells(IOEC) and to reconstruct oral precancerous lesion by Lhree dimens iona l cultures. Telomerase activity was analyzed by Telomerase assays and Telomere longLh W:lS dcLccLcd by Termina l restri ction I"ragment analysis. bTERT gene was assayecl by tbe RT-PCR. p16lNK4 a‘ pHb. CDK2. P21CIP1. p27 and p53 were examined by western blotting. Three dimensiona l cu1ture using air - liquicl inLe rl"ace was pe rl"ormed. As results. IOEC was establi shed by ectopic ex pression of catalytic subunit• of telomerase‘ h1'EH1'. which is con tinuously maintained for more tban 120 population doublings(PDs) . IOEC showecl the expression 01" h1'ER1' and h1'H mHNA‘ elongated telomere length and higher telomerase activity. These cel ls showed no ex pression of p16lNK4a with retention 01" pRb and CDK2. Expression of p21CIP1. p27 a nd p53 may have no relation to immorta li ze oraJ epithelial cell s. Three dimensional culture of IOEC showed dysplastic strat ilïed epithelia l cell s. These results may serve as a useful moclel system for the study of oral carcinogenesis.

최근 미세먼지, 내분비장애, 환경 호르몬등에 의해 피부 염증 질환 환자들이 증가함에 따라 화장품 소재 개발 연구는 스테로이드, 항히스타민제 등의 피부염 치료 합성화합물 보다 이를 대체할 수 있는 천연물 기반의 보다 안전한 소재 발굴에 관심이 더 증가되고 있다. 따라서 본 연구에서는 여러 가지 천연 약재 스크리닝을 거쳐 피부 효능 효과가 검증된 두충, 익지인, 백강잠의 한방추출물(Mix)을 선정하고, 이들의 새로운 피부 효능을 규명하여 천연 화장품 소재를 개발하고자 하였다. 우선 한방추출물(Mix)의 항산화 효능을 검증하기 위해 DPPH assay를 수행한 결과 400 μg/mL 농도 조건에서 약 98.8% DPPH radical 소거 활성을 확인하였다. 한방추출물(Mix)의 미백효능을 확인하기 위해 B16F10 세포주를 활용하여 한방추출물에 의한 멜라닌 합성량을 측정하였다. 400 μg/mL 농도 조건에서 α-MSH 처리군 대비 27.1% 수준까지 멜라닌 합성량이 감소하여 미백 효능 활성에 대해 유의성 있는 결과를 확인하였다. 또한 한방추출물(Mix)의 항염증 효능을 확인하기 위해 LPS 자극으로 활성화된 RAW264.7 대식세포에서 NO(nitric oxide) 합성 및 iNOS, COX-2의 유전자 발현을 관찰한 결과 모두 유의적으로 감소되는 것을 확인하였다. 염증성 사이토카인으로 알려진 IL-1α, IL-1β, IL-6, TNF-α의 mRNA 발현을 분석한 결과에서도 한방추출물에 의해 효과적으로 억제되는 것을 확인하였다. 마지막으로 피부장벽 기능 강화를 확인하기 위해 인간 각질형성세포인 HaCaT을 이용해 tight junction 구성 단백질 인 claudin 1 유전자의 발현 변화를 관찰한 결과 한방추출물에 의해 mRNA 발현이 농도 의존적으로 증가되는 것을 확인하였다. 따라서 본 연구를 통해 우리는 두충, 익지인, 백강잠을 함유한 한방추출물(Mix)이 항산화, 항염, 미백, 그리고 피부장벽 강화 등에 유효한 소재임을 확인하였고, 향후 피부 임상시험 등이 이뤄진다면 피부염 환자에 효과적인 천연 화장품 소재로 개발될 수 있을 것이다.

Background : Atractylodes japonica koidz (AJ) is a perennial herb that belongs to Atractylodes genus. The dried rhizome of AJ is known as ‘Baek-chul’. The ‘Baek-chul’ is used as important traditional medicine in north-east Asia. It is considered to be effective for the treatment of stomach disorder, virus, diuresis, inflammation, arthritis. AJ is heavily depend on import from china and only few studies have been carried out. In this study, we develop SSR marker to build a foundation of breeding, to analyze genetic diversity and to construct core collection. Methods and Results : AJ resources was collected from each different place. To find simple sequence repeat (SSR) marker, we sequenced genomic DNA of AJ resources using Illumina HiSeq 2000 System. As a result of next generation sequencing (NGS), we obtained putative SSR loci. From these SSR primers, 553 SSR primer sets were designed successfully and confirmed polymorphism by in silico analysis. Nucleotide motifs ranged from tri- to penta-. Among these, 48 primer were tested in 4 individuals by capillary electrophoresis. Finally, selected 28 SSR marker were showed clear band and polymorphism by Electrophoresis. Conclusion : In this study, we developed 28 polymorphic SSR marker using NGS, and it could be used for analyzing genetic diversity of A. japonica. These marker would be useful for breeding of new cultivar in the future.

Genetically modified (GM) papaya (Carica papaya L.) line 55-1 (55-1), which is resistant to papaya ringspot virus infection, has been marketed internationally. Many countries such as the European Union, Japan, and Korea have a mandatory safety assessment, approval and labeling regulations for GM foods. Thus, there is a need for specific methods for detecting 55-1. In this study, we established a real-time PCR detection method applicable to 55-1 for a variety of papaya products. The limit of detection was possible for fresh papaya fruit up to dilutions of 0.005% and 0.01% (weight per weight [w/w]) for homozygous SunUp and heterozygous Rainbow cultivars, respectively, in non-GM papaya. The 55-1 event-specific detection method observed parallelism (r2>0.99) between the concentration of line 55-1 cultivars and Ct values obtained in amplification plots at concentrations of 0.005-10% for SunUp DNA and 0.01-10% for Rainbow DNA. The method was applicable to the qualitative detection in various types of processed products (cocktail fruit, dried fruit, juice, etc.) containing papaya as a main ingredient. Monitoring papaya products for the presence of GM papaya were demonstrated using a P35S and T-nos real-time PCR detection method but no amplification signals were detected.