The initial development plans for the six reactor designs, soon after the release of Generation IV International Forum (GIF) TRM in 2002, were characterized by high ambition [1]. Specifically, the sodium-cooled fast reactor (SFR) and very-high temperature reactor (VHTR) gained significant attention and were expected to reach the validation stage by the 2020s, with commercial viability projected for the 2030s. However, these projections have been unrealized because of various factors. The development of reactor designs by the GIF was supposed to be influenced by events such as the 2008 global financial crisis, 2011 Fukushima accident [2, 3], discovery of extensive shale oil reserves in the United States, and overly ambitious technological targets. Consequently, the momentum for VHTR development reduced significantly. In this context, the aims of this study were to compare and analyze the development progress of the six Gen IV reactor designs over the past 20 years, based on the GIF roadmaps published in 2002 and 2014. The primary focus was to examine the prospects for the reactor designs in relation to spent nuclear fuel burning in conjunction with small modular reactor (SMR), including molten salt reactor (MSR), which is expected to have spent nuclear fuel management potential.

The domestic Pressurized Heavy Water Reactor (PWHR) nuclear power plant, Wolsong Unit 1, was permanently shut down on December 24, 2019. However, research on decommissioning has mainly focused on Pressurized Water Reactors (PWRs), with a notable absence of both domestic and international experience in the decommissioning of PHWRs. If proper business management such as radiation safety and waste is not performed, it can lead to increased business risks and costs in decommissioning. Therefore, the assessment of waste volume and cost, which provide fundamental data for the nuclear decommissioning process, is a crucial technical requirement before initiating the actual decommissioning of Wolsong Unit 1. Decommissioning radiation-contaminated structures and facilities presents significant challenges due to high radiation levels, making it difficult for workers to access these areas. Therefore, technology development should precede decommissioning process assessments and safety evaluations, facilitating the derivation of optimal decommissioning procedures and ensuring worker safety while enhancing the efficiency of decommissioning operations. In this study, we have developed a program to estimate decommissioning waste amounts for PHWRs, building upon prior research on PWR decommissioning projects while accounting for the specific design characteristics of PHWRs. To evaluate the amount of radioactive waste generated during decommissioning, we considered the characteristics of radioactive waste, disposal methods, packaging container specifications, and the criteria for the transfer of radioactive waste to disposal operators. Based on the derived algorithm, we conducted a detailed design and implemented the program. The proposed program is based on 3D modeling of the decommissioning components and the calculation of the Work Difficulty Factor (WDF), which is used to determine the time weighting factors for each task. Program users can select the cutting and packaging conditions for decommissioning components, estimate waste amount based on the chosen decommissioning method, and calculate costs using time weighting factors. It can be applied not only to PHWRs, but also to PWRs and non-nuclear fields, providing a flexible tool for optimizing decommissioning process.

With the aging of nuclear power plants (NPPs) in 37 countries around the world, 207 out of 437 NPPs have been permanently shutdown as of August 2022 according to the IAEA. In Korea, the decommissioning of NPPs is emerging as a challenge due to the permanent shutdown of Kori Unit 1 and Wolsong Unit 1. However, there are no cases of decommissioning activities for Heavy Water Reactor (HWR) such as Wolsong Unit 1 although most of the decommissioning technologies for Light Water Reactor (LWR) such as Kori Unit 1 have been developed and there are cases of overseas decommissioning activities. This study shows the development of a decommissioning waste amount/cost/process linkage program for decommissioning Pressurized Heavy Water Reactor (PHWR), i.e. CANDU NPPs. The proposed program is an integrated management program that can derive optimal processes from an economic and safety perspective when decommissioning PHWR based on 3D modeling of the structures and digital mock-up system that links the characteristic data of PHWR, equipment and construction methods. This program can be used to simulate the nuclear decommissioning activities in a virtual space in three dimensions, and to evaluate the decommissioning operation characteristics, waste amount, cost, and exposure dose to worker. In order to verify the results, our methods for calculating optimal decommissioning quantity, which are closely related to radiological impact on workers and cost reduction during decommissioning, were compared with the methods of the foreign specialized institution (NAGRA). The optimal decommissioning quantity can be calculated by classifying the radioactivity level through MCNP modeling of waste, investigating domestic disposal containers, and selecting cutting sizes, so that costs can be reduced according to the final disposal waste reduction. As the target waste to be decommissioning for comparative study with NAGRA, the calandria in PHWR was modeled using MCNP. For packaging waste container, NAGRA selected three (P2A, P3, MOSAIK), and we selected two (P2A, P3) and compared them. It is intended to develop an integrated management program to derive the optimal process for decommissioning PHWR by linking the optimal decommissioning quantity calculation methodology with the detailed studies on exposure dose to worker, decommissioning order, difficulty of work, and cost evaluation. As a result, it is considered that it can be used not only for PHWR but also for other types of NPPs decommissioning in the future to derive optimal results such as worker safety and cost reduction.

To develop flexible adsorbents for compact volatile organic compound (VOC) air purifiers, flexible as-spun zeolite fibers are prepared by an electrospinning method, and then zeolite particles are exposed as active sites for VOC (toluene) adsorption on the surface of the fibers by a thermal surface partial etching process. The breakthrough curves for the adsorption and temperature programmed desorption (TPD) curves of toluene over the flexible zeolite fibers is investigated as a function of the thermal etching temperature by gas chromatography (GC), and the adsorption/desorption characteristics improves with an increase in the thermal surface etching temperature. The effect of acidity on the flexible zeolite fibers for the removal of toluene is investigated as a function of the SiO2/Al2O3 ratios of zeolites. The acidity of the flexible zeolite fibers with different SiO2/Al2O3 ratios is measured by ammonia-temperature-programmed desorption (NH3-TPD), and the adsorption/desorption characteristics are investigated by GC. The results of the toluene adsorption/desorption experiments confirm that a higher SiO2/ Al2O3 ratio of the flexible zeolite fibers creates a better toluene adsorption/desorption performance.

Pesticide application in agriculture provides significant benefits such as protection from disease, prevention of harmful insects, and increased crop yields. However, accurate toxicological tests and risk assessments are necessary because of many related adverse effects associated with pesticide use. In this review, we discuss and analyze residual pesticides contained in livestock feed in Korea. A pesticide residue tolerance standard for livestock feed has not been precisely established; so, risk assessments are required to ensure safety. Standards and approaches for animal criteria and appropriate methods for evaluating residual pesticides are discussed and analyzed based on technology related to animal product safety in Korea. The safety of livestock feed containing pesticides is assessed to establish maximum residue limits relative to pesticides. Analysis of residual pesticides in milk, muscle, brain, and fat was performed with a livestock residue test and safety evaluation of the detected pesticide was performed. Efficacy of organic solvent extraction and clean-up of feed was verified, and suitability of the instrument was examined to establish if they are effective, rapid, and safe. This review discussed extensively how pesticide residue tolerance in livestock feed and hazard evaluation may be applied in future studies.

This study was carried out to investigate the management characteristics and techniques by comparing and analyzing the process of mixing, sterilization, cooling, inoculation and incubation for bag cultivation of L. edodes. The medium was sterilized after mixing it for 30 minutes, 1 and 2 hours respectively. The general moisture content of the sawdust substrate has been adjusted to 65%, while the case of the L. edodes substrate was 55%. Only 5% of wood chips of 5-8 mm in particle size were mixed to secure the space of the sawdust particles. As a result, mycelial growth was 1.4cm faster and the density was better(+++) than control(++). Wood chips are soaked in advance for a week during winter and 4 days during summer. There is an average number of 1.6x108 (cfu) of microorganisms in the sawdust that has been piled for six months outdoor. In summer, it has to be used immediately after mixing sawdust. High-pressure sterilization should be performed to use as a mushroom spawn, and to improve physical properties, it was great to sterilize the medium at a normal-pressure. There are height and width type for bags to be consumed for bagging. When the height was reduced into 17cm and the width was increased into 13cm, the browning period was shortened by 30 days and the period of mycelial growth was shortened by 25 days. The sterilized medium had an average of 4x103(cfu) of microorganisms at 25°C and 1.3×102 (cfu) at 15°C. After 25 days from inoculation in vitro, the growth condition of sawdust was the best with 13.2 cm, followed by grain spawn and liquid respectively. When inoculated with liquid spawn, the moisture content of substrate should be adjusted to 55% to 50% in advance.

Background : Ginseng (Panax ginseng C.A. Meyer) is one of the most important medicinal plants in Korea, but its yields are often reduced by a variety of root pathogens. The root rot of ginseng is a destructive soil-borne disease caused by Cylindrocarpon destructans (teleomorph: Ilyonectria radicicola). Methods and Results : Ilyonectria radicicola and its Cylindrocarpon-like anamorph represent a species complex that is commonly associated with root rot disease symptoms on virulence. During the course of this study, several species could be distinguished from I. radicicola sensu stricto based on morphological and culture characteristics. As results of investigated culture characteristics, optimal temperature for mycelial growth of isolates were 20℃, and colony pattern and color were slightly different on PDA. Isolates of I. radicicola were analyzed for their genetic relatedness based on several genes and microsatellite region. I. radicicola group was divided into two small groups. Conclusion : Therefore, we were able to confirm pathogenicity and genetic difference between the isolates in each of the groups of the pathogen. Among these isolates, 21.5% were classified as highly virulent and 78.5% were weakly virulent. *(Corresponding

Background : The fungus Cylindrocarpon destructans (Zins) Scholten is the cause of root rot in many ginseng production areas. Root exudate composition and quantity vary in relation to plant nutritional status, but the impact of the differences on rhizosphere microbial communities is not known. Methods and Results : Five kinds of rotation crops, sudan grass soybean peanut sweet potato, perilla were grown for one year in ginseng garden harvested 6-year-old ginseng. The ratio of gram-negative bacteria, fungi, bacteria, total microbial biomass, aerobic/anaerobic microbes were increased by rotational crop cultivation, while the ratio of actinomycetes and the ratio of saturated to unsaturated fatty acids were decreased. The increase in the fungal density or the increase in the proportion of fungi to the bacteria tended to increase the incidence of root rot, but there was no significant difference. The yield of ginseng root showed a highly significant negative correlation with actinomycetes. The correlation between the soil chemical properties and the incidence of root rot was analyzed by cultivating 23 kinds of green manure crops for one year in field where cultivated ginseng continuously. The survival rate of ginseng showed a highly significant positive correlation with soil acidity and a highly significant negative correlation with nitrate nitrogen, and a significant negative correlation with soil salt concentration. Conclusion : Rotation crops improved soil microbial communities, lowered the rate of fungi and increased the proportion of bacteria, the survival rate of ginseng was significantly correlated with soil acidity, nitrate nitrogen and soil salinity.

Background: Some plants have harmful effects on fungi and bacteria as well as plants. Incorporating into soil as green manures are effective in reducing population densities of soil pathogens. Methods and Results: Twenty-three species of green manure crops were cultivated after the harvest of 6-year-old ginseng and then incorporated green manure into the soil at the flowering stage. The following year, the root rot ratio of 2-year-old ginseng and soil chemical properties were investigated. Sorghum sudanense, Helianthus annuus, and Helianthus tuberosus were relatively high in dry matter production. Without incorporating green manure into soil, NO3, EC (electric conductivity) and K were decreased by 95%, 79% and 65%, respectively. When green manure was incorporated to soil, P2O5 and NO3, were reduced by 41% and 25%, respectively. The survived root ratio of 2-year-old ginseng were significantly increased by 56.2%, 47.5%, and 47.3% in Sorghum sudanense, Ricinus communis and Helianthus tuberosus, respectively, In addition, there was a significant increase in Secale cereale, Chrysanthemum morifolium, Atractylodes macrocephala, and Smallanthus sonchifolius. The survived root ratio of ginseng showed a significant positive correlation with soil pH and a negative correlation with NO3, and EC. Conclusion: Cultivation of Chrysanthemum family mainly using rhizome and root as green manure was effective for root rot disease of ginseng.

A new mandarin hybrid cultivar ‘Shinyegam’ was developed from a cross between ‘Kiyomi’ (Citrus unshiu × C. sinensis) and ‘Wilking’ (Citrus reticulata) at the Citrus Research Institute of the National Institute of Horticultural and Herbal Science in 2012. The ‘Jegam na No. 33’, a first selection seedling from the fruits obtained in 2008 was finally named ‘Shinyegam’ after field evaluation trials at five locations in Jeju island, Korea from 2010 to 2012. The tree vigor was intermediate and the tree was spreading in nature, similar to that of the ‘Kiyomi’ cultivar. The fruits produced were compressed to oblate and globose in shape, were a deep orange in color, and moderately weighed at 130 g. ‘Shinyegam’ produces fruit that mature in late December, and has few seeds, which are mono-embryonic. The average seed number of a fruit varied depending on the pollinator citrus tree. Cultivation of ‘Shinyegam’ along with the other cultivars possessing high pollen fertility resulted in seed numbers that was more than 20, while in the absence of a pollinator species the seed number was around 5. The fruit contained soluble solids at 11 to 12 ° Bx and the acidity was approximately 1% at maturity. The rind thickness of approximately 2.5 mm ensures easy peeling. The flesh is very tender and juicy, with a pleasant, aromatic flavor similar to that of ‘Wilking’ but is comparatively weak. ‘Shinyegam’ is moderately resistant to the citrus scab disease and melanose, but susceptible to citrus canker. Owing to the high quality of fruit, good aroma, and cold hardness characteristics, this cultivar is expected to satisfy consumer acceptability in terms of the diversity of the cultivar in open-field cultivation.

Background : Ginseng root rot caused by soil-borne pathogens, Cylindrocarpon destructans and Fusarium solani, is a major factors of replanting failure in ginseng cultivation. Some of the phenolic compounds detected in the soil of commercially cultivated American ginseng could inhibit the seed germination and seedling growth of American ginseng. Our study is to investigate the causes of replanting failure of ginseng by overhead flooding treatment and soil incorporation of ginseng fine root in soil infected with root rot pathogens. Methods and Results : To make soil occurring continuous cropping injury, 2-year-old ginseng infected with Cylindrocarpon destructans replanted in soil cultivated ginseng for 5 years. Treatment are as follows: 1) control, 2) water of 2ℓ was irrigate infected soil of 20ℓ, 3) ginseng fine root of 20g was mixed with infected soil of 20ℓ. Soil pH was increased, while other inorganic components were significantly reduced by overhead flooding treatment. Soil incorporation of ginseng fine root decreased soil pH, but increased EC, NO3, P2O5 and K, meanwhile, did not affected changes in organic matter, calcium, magnesium, sodium. Irrigation treatment in soil occurring replanted failure promoted distinctly above-ground growth of ginseng, and inhibited the occurrence of root rot because inorganic nutrient like NO3, P2O5 and K were decreased to optimal levels, and the density of soil pathogens could be reduced. Growth of ginseng was not inhibited, while root rot was promoted by soil incorporation of ginseng fine root. Conclusion : Irrigation treatment was effective in promoting the growth of ginseng and inhibited root rot distinctly. Ginseng fine root remaining in the soil after ginseng harvest did not affect the above-ground growth of ginseng, while promoted the occurrence of root rot.

The 12 cultivars of the Jeju native Citrus are considered to have originated from China. However, the origin of the cultivar ‘Byungkyool’ (Citrus platymamma Hort. ex Tanaka) is not clearly known. We performed PCR analysis by using three primer sets designed from the internal transcribed spacer (ITS) region of nuclear ribosomal DNA (nrDNA) to analyze the phylogenetic relationship between the traditional citrus cultivars and the Byungkyool cultivar. Sequence length of the nrDNA ITS1 region of JNCPCRI (Jeju Native Citrus platymamma Citrus Research Institute) cultivar was 247 bp, 8the ITS2 region was 228 bp and the total ITS region (ITS1-5.8S-ITS2) was 638 bp. Analysis of the genetic relationship based on the sequence analysis at the ITS region of the JNCPCRI cultivar revealed that the ITS1 region of the cultivar was genetically the same as that of the Byungkyool (JQ990189) cultivar, and the ITS2 region was genetically similar to the Binkyool (JQ990180), Hongkyool (JQ990178), Dangyooja (JQ990179), and Pyunkyool (JQ990181) cultivars. Moreover, the total ITS region in the 5.8S rDNA region was genetically similar to the Hongkyool (JQ990178) cultivar. In addition, the total ITS region of the JNCPCRI cultivar was the most closely related to the Cheongkyool (JQ990183) cultivar and has been reported to originate from the Binkyool (JQ990180) and Pyunkyool (JQ990181) cultivars. Although the JNCPCRI cultivar was morphologically the same as the Byungkyool (JQ990189) cultivar, the ITS region showed genetic heterogeneity. Taken together, we conclude that the genetic variation in the ITS region of JNCPCRI cultivar suggests that it was propagated through fertilization with the surrounding citrus cultivars.

Toxocariasis is an illness of humans caused by roundworm. Toxocara species are commonly found in dogs and cats. Humans are accidental hosts. There are two routes of infection. One route is the ingestion of infected eggs, and the other route is the ingestion of an infected paratenic host. Clinical manifestations vary from asymptomatic infection to severe organ failure. In most cases, the patients are asymptomatic and the disease is self-limited. Thus, patients with mild symptoms do not require treatment. However we report on cases of patients with asymptomatic hepatic nodules who were treated to exclude malig-nant disease.

An unbalance of rice productions and consumptions caused serious problems in both of agricultural area and grain market of korea. In recently, various efforts for rice processing products such as rice noodles and rice wines are in progress to overcome the unstable rice market. Among them, waxy rice is predominant items in processing rice. However, varietal features of starch viscosity are not considered in the processing industries and rice breeding field. In this study, 12 waxy rices and 2 cultivars Ilmibyeo(japonica) and IR72(Indica) were studied for physicochemical and amylogram to characterize the use of waxy rices. The amylose contents of waxy rices were from 7.1 to 8.1% with soft gel consistency and relatively low alkali digestion value(1.4% KOH) compare to Ilmibyeo. In the amylogram analysis(RVU) of waxy rices, unlikely normal rices, very fast peak time(about 3.5 min.) was obtained compare to that of 6.2 min. of Ilmibyeo. And 2 to 3 groups were classified based on peak viscosity and consitency of RVU. Wangchal, Odorokimochi and Hangangchal showed relatively high peak viscosity seemed not suitable for rice cake due to the hardness speed. And most of waxy rices developed in korea were believed to be suitable for oil fried cakes(Hankwa) because of a certain grade of starch degradation speed. And Mochiminori and Midoromochi originated from japan could be a good sources in waxy rice breeding program to improve the cooking properties especially in slow down of hardness speed with very low peak viscosity, hot viscosity and cool viscosity.