2018년 여름의 폭염은 기상관측을 시작(1907년 10월 1일)한 이래 111년 만에 가장 높은 기온을 기록하였는데, 서울은 39.6℃를 기록(2018년 8월 1일)하여 종전의 기록인 38.4℃(1994년 7월 24일)를 뛰어넘었다. 열섬현상으로 인해 도시의 온도가 상승하고 하절기 열쾌적성이 저하됨에 따라 하절기 열환경 개선에 대한 연구가 지속적으로 진행되고 있다. 본 연구의 목적은 조경공 사 전·후의 온도저감 및 외부공간 이용자가 느끼는 열환경 개선에 대하여 정량적으로 검증하여 설계 및 시공단계에서 활용할 수 있는 기초적 자료를 제공하고자 하였다. 연구결과는 다음 과 같다. 미기후 실측에 의한 측점별 조경공사 전·후의 온도저감을 비교 분석한 결과, 오전 10 시 조경공사 전 평균온도는 34.5℃이며, 조경공사 후 평균온도는 32.5℃로 2.0℃온도저감 효과가 있는 것으로 분석되었으며, 오후 2시 조경공사 전 평균온도는 37.5℃이며, 조경공사 후 평균 온도는 35.9℃로 1.6℃ 온도저감 효과가 있는 것으로 분석되었다. 오후 5시 조경공사 전 평균온 도는 33.8℃이며, 조경공사 후 평균온도는 31.2℃로 2.6℃ 온도저감 효과가 있는 것으로 분석되었다. 연구결과의 활용방안으로 정량적인 연구방법과 결과는 디자이너의 직관적인 조경설계에 객관성을 부여하는 기초자료로서 활용이 가능할 것이다.

This paper is a review of the construction process, craftsmanship, architectural economy of Bungang Seowon through the Changwon Ilgi(diary). The Bungang Seowon, which was built in the early 18th century, was initially built as a shrine, but was later completed as a seowon upon the decision of the scholars. It was the descendants of Nongam and the Hyanggyo, Seowon, and the government offices that provided economic, human and material support to the construction of Seowon. The small building of Bungang Seowon was run by a civilian carpenter, while the large building was run by a monk carpenter. The mobilization of the building workers was done by local scholars assigning the number of workers needed for each village.

본 연구는 4대강 보 설치에 따른 실지렁이류의 분포 특성을 파악하고자 연구를 실시하였다. 현지조사는 2018년 3월부터 10월까지 총 10회 실시하였다. 조사결과 총 18종 35,390 ind. m-2 개체가 출현하였다. Limnodrilus hoffmeisteri (77.1%)이 우점종, Branchiura sowerbyi (9.5%)이 아우점종으로 분석되었다. 건중량 분석결과 총 32.418 g m-2이 계측 되었으며, 각 종별 건중량과 TOC 농도와의 상관 분석 결과 실지렁이, 아가미지렁이와 TOC 농도 간 음의 상관성을 갖는 것으로 나타났다. 실지렁이류와 물리적·이화학적 요인들 간의 다변량 상관분석 결과 퇴적토 깊이, Clay 비율, Silt 비율, Cobble 비율, Pebble 비율, pH, TOC 항목과 상관성을 갖는 것으로 분석되었다 (p<0.05, p<0.01). 조사지역별 실지렁이류 개체수와 퇴적토 깊이 및 Clay의 비율과 비교·분석한 결과 퇴적토의 깊이와 Clay의 비율이 높을수록 개체 수가 많은 것으로 나타났다. 조사시기에 따른 실지렁이류의 개체수, TOC 비교·분석결과 3월부터 10월까지 개체수는 감소하는 경향성을 나타냈으며, TOC는 증가하는 경향성을 갖는 것으로 분석되었다.

The transition from “More-of-Less” markets (economies of scale) to “Less-of-More” markets (economies of scope) is supported by advances of disruptive manufacturing and reconfigurable-supply-chain management technologies. With the prevalence of cyber-physical manufacturing systems, additive manufacturing technology is of great impact on industry, the economy, and society. Traditionally, backbone structures are built via bottom-up manufacturing with either pre-fabricated building blocks such as bricks or with layer-by-layer concrete casting such as climbing form-work casting. In both cases, the design selection is limited by form-work design and cost. Accordingly, the tool-less building of architecture with high design freedom is attractive. In the present study, we review the technological trends of additive manufacturing for construction-scale additive manufacturing in particular. The rapid tooling of patterns or molds and rapid manufacturing of construction parts or whole structures is extensively explored through uncertainties from technology. The future regulation still has drawbacks in the adoption of additive manufacturing in construction industries.

When 3D printing is used practically at construction sites, there is a serious lack of studies on the conflict with construction-related laws and expected operational problems. Accordingly, the purpose of this study is to present obstacles and directions for improvement in construction-related laws (Building Act, Construction Technology Promotion Act, Housing Act, Construction Machinery Management Act, etc.) for practical operation of 3D printing. The important results are as follows. Amending existing construction-related laws for 3D printing is irrational and inefficient in terms of structure and material. This study proposed a method of satisfying performance required by laws or standards based on the performance design method presented in existing laws and systems through structure and material performance certification procedure. In addition, inclusion of 3D printing equipment in the Construction Machinery Management Act results in various restrictions such as equipment inspection and certification of machine parts. As such restrictions can block vitalization of 3D printing, a long-term and step-wise approach was suggested.

When the foundation work of the underground part of the building structure or the excavation work of the civil engineering structure is carried out, there is the earthwork work by the inevitable process. As the economic situation continues to develop, construction in urban areas is becoming bigger and higher in scale due to the expansion of infrastructure and the rescue of urban dwellings in urban areas, and excavation of underground roads is inevitable. Excavation of the underground part may cause problems in the process difficulty and safety of the earthworks due to the complexity and various characteristics of the ground selected without consideration of the ground characteristics and site conditions. In order to complete the required facilities, it is necessary to secure the design and construction of the retaining walls. In order to complete the required construction, It is an important factor satisfying construction period and economical efficiency.

Oversized fashion is again in the spotlight due to the influence of retro fashion. This has created new fashion trends with methods different from those of the past. This analysis examines recent trends by sorting these looks according to new and different methods of judging their appearance. A new categorization of the oversized look and its configurations has been created, one which separates “big” looks, partial changes, and layered looks. This research was based on historical review and previous studies. Three thousand one hundred thirty-six photos of oversized looks that have appeared in collections over the past five years were gathered, and their appearance was categorized according to type. The categorization results showed that big looks (55.1%) were most prevalent, followed by partial alterations (36.35%), and layered looks (8.45%). In comparison to prior oversized clothing production, new permutations of the “Big” look expanded the silhouettes of torso, shoulders, neckline and collar. Partial changes have expanded from the broadened shoulders of the 1980s. Today these styles expand the shoulders and armholes vertically or horizontally, which dramatically exaggerates the sleeves and collar. The layered look no longer simply features overlapping layers but takes the form of over-layering through cuts and insertions. Through such analysis it is clear that modern oversized looks break away from the simple expanded forms and production methods of the past. They now attempt to realize an exaggerated beauty of form regarding each clothing component and also maximize decorative effects through innovative drafting or sewing methods.

After the study of Fujishima Gaijiro(1930), although it is common to see that the Tang-ruler(唐尺) was used in the construction of the Silla Sacheonwangsa temple(679), the basis of the discrimination of the construction measure and the detection of the unit length is not actually sufficient since conventional research was done before the excavation. The study was based on archaeological results, which was secured through the excavation research(2006∼2012) of the temple site in recent years, to determine the construction measure and try to detect the unit length. In the analysis of the measured value of the ruins, the numerical data were obtained through measurements on drawings of the ruins, the tendency of conversion measure’s number appearing by dividing each unit length of the Goguryeo-ruler(高句麗尺) and Tang-ruler within a certain range was compared from the Wansu-je(完數制) viewpoint. The research results are summarized as follows : 1)As a result of the analysis of the distance between the site’s center, the case that conversion Cheok’s(尺) number is converged to the unit of Jang(丈) within the range of unit length expresses three times more in Tang-ruler, and it is confirmed that a simple multiple relationship based on the unit of Jang is established between conversion Cheok’s number. 2)As a result of analysis of Bokan(梁間) of the each Corridor site and the measured value of the stonework ruins, it could be confirmed that appears overwhelmingly in the Tang-ruler when conversion Cheok’s number becomes an integer within the range of unit length. The results of the analysis are judged to be a clear basis for viewing the Tang-ruler as the construction measure of the Sacheonwangsa temple. 3)The estimated unit lengths of the construction measure that were obtained from the analysis of the distance between the site’scenter, the foundation stone center distance of the building site and the measured value of the stonework ruins are slightly different. There is a limit to the verification of the construction error about this, however it is difficult to specify, it is mentioned 294.37㎜ which is obtained from the analysis of the distance between the site’s center.

PURPOSES : As road pavement design in an apartment complex varies from one site to another, it is practically difficult to calculate and estimate the traffic volume of construction vehicles. Therefore, this study introduces a methodology to estimate the number of construction vehicles and use it as an indicator to evaluate the conditions of road pavement in an apartment complex. METHODS: Through a literature review and site survey, the operational status of the construction vehicles passing through the site was identified, and the factors affecting the number of construction vehicles were analyzed. The methodologies used to estimate the number of construction vehicles were verified by calculating the Cumulative Load Prediction Index (CLPI), which is a predictive index of the cumulative load on each path. By using this index, the traffic volume of construction vehicles can be estimated based on the number of households in an apartment complex. To prove this definition, we examined the surface and core conditions, and compared the results against the predicted values. RESULTS : By comparing the Cumulative Load Prediction Index with the crack rate on the pavement surface, we obtained a correlation coefficient of 0.92. Furthermore, the analysis indicated that the core condition rate would decrease as the Cumulative Load Prediction Index increased. This correlation between the Cumulative Load Prediction Index, and the pavement surface and core status demonstrates that the traffic volume can be estimated by considering the number of households. CONCLUSIONS: The Cumulative Load Prediction Index presented in this study is a suitable indicator for estimating the conditions of the road pavement in an apartment complex by considering the number of households in the complex, even if the construction processes and characteristics vary.

The “Imwon Gyeongjeji(林園經濟志)”, the largest encyclopedia of the Late Joseon Dynasty covers the details of the materials and construction methods related to everyday life‘s facilities. It is very useful to examine the "Imwon Gyeongjeji” for studying the materials and construction methods of the fences in traditional dwellings. Therefore, we tried to find the characteristics of the traditional fences exhibited in the "Imwon Gyeongjeji" by examining the construction methods shown in the book by structure of the fence. The results are as follow. First, the nine types of fence were listed in the "Imwon Gyeongjeji". Second, we could figure out the construction methods according to the structure of fences. The fence is divided into three parts: foundation, body, and roof. The body of the fence is a characteristic part distinguishing the types of fence. The foundation and the roof are related to the durability of the fence, regardless of the type of fence. The "Imwon Gyeongjeji” showed a robust manner in building fences than known today. Third, we found that the introductions and transformations of certain fence types. Fences such as Chuibyong(翠屛), Jeon Doldam(甎墻) and Bunjang were originated from China, yet has developed unique Korean styles in Joseon. It could also be seen that Kajo Zhang(哥窯墻) and Yonglong Zhang(玲瓏墻) were special fence types imported from China. It is not certain that the fences depicted in the "Imwon Gyeongjeji", represent the whole features of Joseon fences, but it is certainly an important literature to understand the structure and design of traditional fences of the Late Joseon Dynasty.