PURPOSES : In this study, emissions from asphalt mixture production and construction processes are calculated and used to estimate the emission from each asphalt pavement layer. The calculated emissions for the processes are used as fundamental data to estimate the total emission from the entire life cycle of pavement engineering in South Korea. METHODS : A design proposal and the Korean standard, which provide quantitative information for activities, were used to estimate the amount of construction materials and energy consumption. Subsequently, the LCI DB from NAPA and the LCIA DB from EPA were utilized in conjunction with the estimated quantity to assess the effect of the emissions to determine their environmental impact categories. RESULTS : Calculation results show that 5.84 million ton of CO2eq is discharged from production and construction processes, whereas 3.24 million ton of CO2eq is discharged from operation processes in the pavement engineering sector. The total GHG emission, i.e., 9.08 million ton of CO2eq, is approximately 1.25% of the national GHG emission in 2018. The asphalt mixture production process results in the highest GHG emission in the life cycle of asphalt pavements. CONCLUSIONS : An LCI DB that accounts for the industrial characteristics of South Korea must be established to provide more reliable emission data to be used for national GHG reduction plans, including those for the pavement engineering sector.

PURPOSES : Preventive pavement maintenance is an economical and efficient method of infrastructure management. This study aims to improve the performance of cold thin-layer asphalt pavement, which is mainly used in earthwork pavement, and for bridge overlays and structures. METHODS : A cold asphalt mixture of modified emulsified asphalt and RAP was prepared for cold recycled thin-layer asphalt pavement. The performance of the mixture as a function of fiber reinforcement to improve flexural strength and crack resistance was evaluated. RESULTS : The use of RAP aggregate in cold asphalt mixture was found to increase the cohesive strength of the mixture and improve the wet abrasion resistance due to the effect of the residual binder. As a result of the loaded wheel test and flexural tension test with the addition of fiber reinforcement, it was found that the crack resistance of 0.4 % glass fiber was the best, and especially, the flexibility at low temperature was excellent. CONCLUSIONS : The cold recycled thin-layer asphalt pavement mixture has improved cohesive strength, flexural strength, and crack resistance compared to existing cold asphalt pavement materials, so it will contribute to economical and effective maintenance in preventive maintenance of bridge overlays and structural pavements.

PURPOSES : This study evaluates the long-term performance of the asphalt overlay designed by the Seoul pavement design method which determines overlay thickness by considering existing pavement conditions, traffic volume, and bearing capacity of the pavement. METHODS : A total of 76 sections including 17 control sections and 59 design sections were constructed under various traffic conditions, overlay thicknesses and asphalt mixtures. The performance of the pavements has been monitored up to 60 months in terms of surface distresses, rutting, and longitudinal roughness. The service life of the pavements was estimated to be the period when the Seoul pavement condition index (SPI) becomes 6.0, i.e., a rehabilitation level. RESULTS : Overall, the service life of the pavements was 72 months in the control and 120 months for the design sections. For relatively thinner overlay sections than designed, the service life reduced significantly; 36 months for 15cm thick overlay and 120 months for 25cm thick overlay. The service life of the pavement in the bus-only lane was 78 months, which is 30 months shorter than that in mixed-traffic lanes. Out of the bus-only lanes, 56% of the pavement along bus stop was deteriorated early to be a poor condition while only 2% of the pavement in a driving lane was degraded to be poor. The overlay with Stone Mastic Asphalt (SMA) in the wearing surface had 38% longer life than that with conventional dense graded mixtures. CONCLUSIONS : Most of the overlays sections designed by the Seoul pavement design method were expected to survive 10 years, except for bus-only lanes. The control sections having 5 to 10 cm thick overlays showed significant lower performance than the design sections. Thus proper thickness and materials considering the characteristics of existing pavement and traffic volumes should be applied to secure the service life of overlays.

PURPOSES : Abroad, road pavement materials vary depending on the speed and traffic volume of vehicles, but owing to the negative perception of block pavements, sidewalks, parking lots, and parks are primarily used in Korea. In addition, since speed restriction policies such as safety speed 5030 have been implemented recently, it is necessary to use block pavements for roadways, which are considered to have the effect of reducing speed. Therefore, it is necessary not only to actively discuss the introduction of block pavements for roadways but to continue research on the effectiveness of the performance evaluation and to change the perception of roads in Korea. METHODS : In this study, five indicators (surface damage, surface temperature, driving speed of vehicle, noise, and suspended dust) were selected for a sustainable road environment. The performance evaluation index of block pavement for roadways was decided according to the domestic and international literature, and the data were collected based on the evaluation index in the section with block pavement for roadways in Korea. RESULTS : The damage rate was calculated 0.35% according to the breakage of block and Maintenance Control Index(MCI) was ranked A~B even though the pavement was used for more than 4~5 years. The surface temperature of block pavement has a temperature reduction effect of 7 ℃ compared with ordinary asphalt pavement and a speed reduction of approximately 4 km/h on average; therefore, the traffic calming effect of block pavements can be expected. The noise of block pavement and asphalt pavement exhibited a similar level, and the noise level experienced by pedestrians did not change significantly as a result of frequency analysis. The measurement of road suspended dust around the road confirmed the possibility of reducing the concentration of road dust in the air owing to the smooth surface drainage and the results indicated the possibility. CONCLUSIONS : The results of this study are expected to contribute to the recognition and functional improvement of domestic block pavements by continuous monitoring to ensure the reliability of blocks. In addition, it is necessary to ensure the reliability of the quality and functional evaluation of paving materials through continuous on-site monitoring.

PURPOSES : In this study, the results of an intensive field survey of a composite pavement applied to an expressway in Korea are analyzed. The results are intended to be used as basic data for evaluating the composite pavement and for preparing quality control measures through a review and analysis of the change in the state of the tensile bonding strength of the composite pavement. METHODS : To evaluate, repeated field coring and indoor tensile bonding strength evaluations are conducted for five years, and the commonality evaluation of pavement using pavement condition investigation equipment is conducted annually. RESULTS : The results of this study show that the degree of reflective crack generation varies depending on the type of concrete pavement and type of asphalt mixture applied to the intermediate layer, and that the CRCP composite pavement exhibits better initial commonality than the JCP composite pavement. In addition, it is confirmed that the composite cross-section pavement section with MASTIC applied as an intermediate layer shows excellent adhesion performance between the lower concrete layers from the beginning of construction in all sections, as well as satisfied the quality control standards for good pavement and tensile adhesion even after approximately five years of public use. CONCLUSIONS : Based on a follow-up survey of the composite pavement testing sections, it is confirmed that the section constructed with the MASTIC intermediate layer and CRCP satisfies the quality control standards for good pavement conditions and tensile adhesion even after approximately five years of public use.

PURPOSES : In this study, a method for evaluating concrete bridge deck deterioration using three-dimensional (3D) ground penetrating radar (GPR) survey data and its in situ application are discussed. METHODS : Field surveys are conducted on two bridges in Yongsan-gu (Bridge A) and Seodaemun-gu (Bridge B) in Seoul using 3D GPR. The obtained survey data are used to calculate the dielectric constant map of each bridge using the extended common midpoint method. In addition, random points on both bridges are selected for the chloride content test in accordance with the KS F 2713 standard. The results from the dielectric constant map and chloride content test are compared. RESULTS : For Bridge A, it is discovered that the percentage of sections with a dielectric constant of 5.0 or less is 1.57%, whereas that above 5.0 is 98.43%; this indicates that the percentage of deteriorated sections for Bridge A is low. Meanwhile, for Bridge B, the dielectric constants calculated for the entire bridge exceed 5.0, which suggests no deterioration for Bridge B. Moreover, all the points selected for the chloride content test have less than 0.15% chloride content and have dielectric constants ranging from 5.0 to 7.0, which are favorable condition for the bridge deck. CONCLUSIONS : The analysis results of the dielectric constants of the concrete bridge deck obtained from the 3D GPR system are consistent with the actual chloride content results. Furthermore, additional verification of this method through field surveys on bridge sections with severe deterioration is highly recommended for future improvements.

PURPOSES : The purpose of this study is to establish a scientific and rational structure pavement maintenance technique and management standard through field investigation and analysis method development for measuring damage to structure pavement such that fundamental quality improvement can be promoted and the life of pavement prolonged. METHODS : In this study, the crack, plastic deformation, IRI, and SPI values measured using the existing RoadScanner of a corresponding section, as well as the relative dielectric constant values of a lower deck measured using a ground penetrating radar are reduced. The results of a small impact load test are verified by comparing the modulus of elasticity measured. RESULTS : In the Hongjecheon Overpass, when comparing the suspicion points of deterioration between the center of the lane and the 25 measurement data points of the wheel pass section based on the elastic modulus of the light falling weight deflectometer (LFWD), it is discovered that the lane comprises four centers (16%) and 18 wheelpaths (72%). The percentage of suspected deterioration points in the center is higher than that in the wheelpath. In addition, in the case of the Seoho Bridge, by comparing the suspicious points of deterioration for 11 measurement data points in the middle of the lane and the wheelpath section based on the elastic modulus of the LFWD, it is discovered that five points (45%) in both the middle of the lane and the wheel pass are similar. CONCLUSIONS : In this study, a comparative analysis of the LFWD elastic modulus and SPI factors (crack rate, plastic deformation, and IRI) of the Hongjecheon Overpass and Seoho Bridge is conducted to confirm the factors of pavement breakage. Among them, it is confirmed that it affects the pavement condition the most; however, to consider the LFWD elastic modulus as an evaluation criterion for future structure pavement, the data points must be verified via additional experiments to ensure high reliability.

PURPOSES : In this study, experimental findings regarding the frost resistance of concrete incorporated with mineral admixtures such as fly ash (FA) and ground granulated blast-furnace slag (SG) are presented. METHODS : To evaluate the performance of the abovementioned concretes under repeated freezing and thawing environments, based on the ASTM C 666 standard, the relative dynamic modulus of elasticity and mass ratio measurements are performed regularly. Furthermore, based on the ASTM C 672 standard, the concretes are exposed to 4% CaCl2 and NaCl salt solutions along with repeated 50 cycles of freezing and thawing. Subsequently, the scaling resistance is evaluated based on the scaled-off mass content and visual examination. RESULTS : SG is less effective in enhancing the scaling resistance of concrete compared with FA. However, the concrete incorporated with SG is more resistant to repeated freeze-thaw actions compared with OPC concrete. Meanwhile, compared with OPC concrete, the concrete incorporated with FA indicates a similar performance in terms of scaling resistance and better resistance against repeated freeze-thaw actions. CONCLUSIONS : The frost resistance of concrete depends significantly on the types of mineral admixtures used in concrete. This emphasizes the importance of selecting the appropriate binder to achieve durable concrete pavements in cold climate regions.