In this study, we collect water control valves that have had accidents due to existing cracks, etc. are collected, and propose investigation items for strengthening the valve structural safety evaluation through a series of analyzes from valve specifications to physicochemical properties are proposed. The results of this study are as follows. First, there was a large variation in the thickness of the body or flange of the valves to be investigated, which is considered to be very important factor, because it may affect the safety of the valve body against internal pressure and the flange connected with the bolt nut. Second, 60% of the valves under investigation had many voids in the valve body and flange, etc. and the decrease in thickness due to corrosion was relatively large on the inner surface in contact with water rather than the outer surface. It is judged that the investigation of depth included voids is very important factor. Third, all valves to be investigated are made of gray cast iron foam, and therefore it is judged that there is no major problem in chemical composition. It is judged that the chemical composition should be investigated. Fourth, as a physical investigation item, the analysis of metal morphology structure seems to be a very important factor for nodular cast iron from rather than a gray cast iron foam water valve with a flake structure. As it was found to be 46.7~68.8% of the standard recommended by KS, it could have a direct effect on damage such as cracks, and therefore it is judged that the evaluation of tensile strength is very important in evaluating the safety of the valve.

The purpose of this study is to verify the structural relationship between job crafting and job enthusiasm, informal learning, social support, and positive psychological capital, and to investigate the effect of informal learning, social support, and positive psychological capital on job crafting through job enthusiasm. A survey was conducted on 451 safety workers at large domestic companies, and the collected data were analyzed for model suitability, influence relations between variables, and mediating effects with AMOS 23.0 using SPSS 23.0. Through research, we found five important results. First, the structural model of job crafting, job enthusiasm, informal learning, social support, and positive psychological capital properly explained the empirical data. Second, social support and positive psychological capital had a positive effect on job enthusiasm, but informal learning did not significantly affect job enthusiasm. Third, informal learning and positive psychological capital had a positive effect on job crafting, while social support did not significantly affect job crafting. Fourth, job enthusiasm had a positive effect on job crafting. Finally, job enthusiasm was found to mediate the relationship between social support and positive psychological capital and job crafting. These suggest that continuous environmental efforts and systematic management measures are needed to promote job crafting of safety workers so that informal learning, social support, positive psychological capital, and job enthusiasm can be expressed. Therefore, the necessity of developing various sub-factors of informal learning that can promote job crafting of safety workers was suggested as a follow-up study.

As modern industries are highly being developed, it is required that mechanical parts have to be manufactured with a high precision. In order to have precise parts, error-free designs have to be done before manufacturing with accuracy. For this intention being fulfilled, a mechanical analysis is essential for design proof. Nowadays, FEM simulation is a popular tool for verifying a machine design. In this paper, an impeller, being utilized in a compressor or an oil mixer as an actuator, is studied for an evaluation. The purpose of this study is to present a safety of an impeller for a proof of its mechanical stability. A static analysis for stress, strain, and deformation within a regular usage is examined. This simulation test shows 357.26×106 Pa for maximum equivalent stress and 0.207mm for total deformation. A fatigue test is carried to provide durability and its result shows that minimum safety factor is 3.2889, which guarantees that it runs without a fatigue failure in 106 cycles. The natural frequencies for the impeller is ranged from 228.09Hz to 1,253.6Hz for the 1st to the 6th mode. Total deformations at these natural frequencies are shown from 6.84mm to 12.631mm. Furthermore, Campbell diagram reveals that a critical speed is not found throughout regular rotational speeds. From the test results for the analysis, this paper concludes that the suggested impeller is proved for its mechanical safety and good to utilize at industries.

해양플랜트는 발주처와 선급에서 요구하는 다양한 항목들을 설계할 시에 반영하여야 한다. 특히, 해양구조물에 탑재되는 Topside Module의 경우 육상플랜트와는 다르게 공간적 제약이 크고 구조물의 움직임과 같은 해상 환경조건 및 안전과 관련된 요구사항들이 많아 그 설계 과정이 매우 까다롭다. 본 연구에서는 Topside Module에 들어가는 주요장비 중 하나인 HPU(Hydraulic Power Unit) 구조물에 작용하는 하중을 DNVGL 규칙에 따라 계산하고, 각 하중조건에 따른 구조안전성 평가를 진행하였고 개발된 제품의 구조 신뢰성을 향상하고자 하였다. 구조해석은 범용프로그램인 MSC 소프트웨어를 사용하였고, 총 5가지 하중 조건으로 구조해석을 진행하여 다양한 움직임에 대한 안전성을 검토하였다. 그 결과 선미 방향 Pitching 상태(Load Case 5)에서 최대 응력이 발생하였고, 응력 수준은 허용응력의 약 85 % 수준이고, 최대변위는 허용치의 약 5 % 수준으로 구조안전성이 확인되었으며 부재 간 간섭은 발생하지 않았다.

Tomb of King Muryeong, located in Sonsan-ri, was found vulnerable due to leakages during since the summer of 2016. This research aims to evaluate structural safety of the Tomb under the tumulus. Site surveys were conducted to find vulnerable inner parts. Structural safety assessment is presented based on both site survey results and analytical results obtained through FEM analysis using the ANSYS program. The underground structure was explicitly modeled to focus on two types of loadings: design loads and actual gravity loads. In general, the tomb does not show any critical deflection increase or damage through the analytical investigation. However, maintenance through continuous monitoring is necessary to prevent severe deflections and stress concentrations since the rigidity of the tomb materials are very vulnerable and likely to be reduced due to prolonged weathering and continuous rain leakage.

본 논문에서는 도서 지역 화물 및 승객 운송을 맡은 연안 항해용 친환경 차도선을 개발하면서, 검토된 주요 결과들에 대해서 논의한다. 시장에서의 경제성을 확보하기 위하여, 폭 19 m를 최종 개발모델 및 갑판면적에 많은 차량이 배치되도록 고려하였다. 조파저항 감소를 위해 선형 형상은 “V”에 선수벌수를 접목하였으며, 수치해석을 통해 개발 선박의 유체역학적 성능을 확인하였다. 선가를 직접 결정짓는 선각 중량을 감소하기 위하여, 최적화 전문 프로그램에 내재된 다목적 최적화 방법인 파레토 시뮬레이트 어닐링을 활용하여 약 3.9 %의 중량 절감을 달성하였다. 본 연구를 통해서 도출된 주요 결과들은 추후 쌍동형 차도선 관련 연구를 수행하는 엔지니어와 관련 산 업에 좋은 선례가 될 것으로 기대한다.

항공기 충돌사고는 1970년대부터 원자력발전소의 인허가에 중요하게 고려되어 온 외부 사건의 하나였다. 9.11 테러 이후 세계 각국에서는 사고로 인한 항공기 충돌에 더하여 의도된 항공기 충돌에 대비한 안전성 평가를 수행해오고 있으며 일부 국가에서는 이를 법제화하여 인허가의 중요한 요건으로 다루고 있다. 항공기 충돌에 대한 안전성 평가는 여러가지 요인으로 인하여 쉽지 않은 작업이며 보다 신뢰성 있는 평가를 위한 연구개발이 세계 각국에서 진행 중이다. 본 논문에서는 각국의 항공기 충돌에 대비한 안전성 평가 요건의 법제화 현황을 사고로 인한 충돌과 의도된 충돌의 경우로 분리하여 정리하였다. 다 양한 조건의 항공기 충돌에 대한 안전성 평가를 위하여 수행되어 온 연구 중 주요한 것들을 정리하였으며 특히 사용후핵연 료 건식저장시설에 대한 내용을 위주로 다루었다.