동아(冬瓜, wax gourd, Benincase hispida) 추출물과 프로바이오틱 유산균(Lactobacillus casei와 Bifidobacterium bifidum) (이하 유산균이라 한다)의 생리활성을 분석하였다. 동아 추출물은 안기오텐신전환효소의 활성을 47.9%, 티로시나제의 활성을 13.2% 저해하였고, 항산화 활성을 23.4% 나타냈다. 설사 증세자 120명에게 동아 추출물 제제를 72시간 복용시킨 결과 117명이 개선되었고, 6∼12시간째에 개선율이 가장 높았다. 개선율은 80%가 치료되는 상태를 기준하였다. 유산균제제는 안기오텐신전환효소의 활성을 21.4% 저해하였다. 설사 증세자 120명에게 유산균 제제를 72시간 복용시킨 결과 108명이 개선되었고, 24시간째에 개선율이 가장 높았다. 이들 결과를 바탕으로, 과민성대장증후군 개선을 위한 동아 추출물과 유산균을 함유한 제제(tablet)를 개발하였다. 이 제품은 안기오텐신전환효소의 활성을 27.1% 저해하였고, 항산화 활성을 20.3% 나타냈다. 인체폐암 A549 세포에 100 ㎍/㎖ 및 250 ㎍/㎖ 농도로 이 제제를 가하여 24시간 반응시킨 결과, 세포 증식을 67% 억제하였고, 동아 추출물 제제나 프로바이오틱 유산균 제제 단독으로 작용시킨 것보다 억제율이 높았다. 또 이 제제를 인체대장암 HCT116 세포에 100 ㎍/㎖ 농도로 가한 결과, 24시간 후 세포 증식이 70% 억제되었고, 동아 추출물 제제나 유산균 제제 단독으로 작용시킨 것보다 개선율과 개선 속도가 높았다. 이 제제를 설사형, 변비형, 일반형의 과민성대장증후군 증세자 164명에게 72시간 복용시킨 결과 100% 개선시켰으며, 개선율은 3∼6시간째에 가장 높았고, 동아 추출물 제제나 유산균 제제 단독으로 사용한 것보다 개선율과 개선속도가 높았다.

 ,  , The Indian wax scale, Ceroplastes ceriferus (Fabricius) is redescribed so that it can be distinguished from Ceroplastes pseudoceriferus Green, which it most nearly resembles and has been confused with in Korea. A dichotomous key, photographs, and DNA barcode information are also presented for identifying three Ceroplastes species from Korea.

Aliphatic cuticular hydrocarbons (CHCs) of different developmental stages of the spot clothing wax cicada, Lycorma delicatula (Hemiptera: Fulgoridae) were analyzed using GC and GC-MS. The numbers of carbons in the major CHCs of each developmental stage 32, 33, 28, 38, 37 in the egg, 1st, 2nd, 3rd, and 4th ins tar nymphal stages, and adults, respectively. The cuticle of Lycorma delicatula contains mainly methyl-branched 9-methylheptacosane (15.11%) in the egg stage, and a high proportion of n-heptacosane in nymphal stages (15.75, 22.42, 25.04, and 23.11 % in the 1st, 2nd, 3rd and 4th instars, respectively). In contrast, male and female adults had high proportions of n-nonacosane (13.42 and 16.55%). The chemical constituents of CHCs were classified into five groups (n-alkanes, monomethylalkanes, dimethylalkanes, trimethylalkanes, olefins) and group profiles of each developmental stage were compared. Egg surface was composed mainly monomethylalkanes (45.39%), a saturated hydrocar-bon. Nymph CHCs consisted primarily of n-alkanes (37.63 to 46.12%). There was a difference between adult male and female CHCs_ However, both contained n-alkanes and monomethylalkanes. CHCs with trimethyl or double bonded structure were rare in all stages.

본 연구는 품질증진제 처리가 산취(Chamaecereus silvestrii) '희망'의 모구품질과 표피 변화에 미치는 영향을 연구하였다. 생체중은 D-sorbitol 처리구보다 D-mannitol 처리구에서 감소율이 낮아 효과적이었다. Diniconazole 200ppm처리는 산취의 자구생육을 어느 정도(수치화) 억제하여 장기수송(50일)에 더 적합하였으며 자구색의 발현 어느 정도(수치화)에도 효과적이었다. 산취 모구의 표피구조는 비모란에 비해 하피 발달이 저조하고 어느 정도(수치화) 단층이며 세포벽도 얇아 어느 정도(수치화) 수송조건에 불리하였는데 생육의 억제효과가 높은 diniconazole 200ppm + D-mannitol 10,000ppm과 발색효과가 좋은 diniconazole 200ppm + wax 살포가 저장 중의 품질 유지에 적합하다고 판단된다.

A wax-typed pheromone dispenser has been developed and applied to control outbreak of the oriental fruit moth, Grapholita molesta, in apple orchard. To optimize its application technique, this study analyzed effect of different amounts of the pheromone dispenser on mating disruption (‘MD’) of G. molesta. Different pheromone dispenser amounts significantly influenced the MD effect assessed by cumulative male adult catches monitored respectively by sticky delta trap and food trap, and resulted in differential damage on host plants. In a field test during entire growing season, a standard amount (120 g per 0.117 ㏊) of wax-typed pheromone dispenser was proved to be effective to suppress outbreak of G. molesta adults and to prevent host plant damage as much as a current commercial MD product (Isomate<SUP>Ⓡ</SUP>). This study also demonstrated an effectiveness of deployment of food trap barriers around MD-treated area to prevent immigration of mated females from outside untreated areas. These results indicate that the wax-typed pheromone dispenser can be applied to control field G. molesta populations and its co-application with food trap barriers would be optimal to maximize MD efficacy.

In this study, a new cleaning process with a low cost of ownership (CoO) was developed with ozonated DI water (DIO3). An ozone concentration of 40 ppm at room temperature was used to remove organic wax film and particles. Wax residues thicker than 200 Å remained after only a commercial dewaxer treatment. A DIO3 treatment in place of a dewaxer showed a low removal rate on a thick wax layer of 8000 Å due to the diffusion-limited reaction of ozone. A dewaxer was combined with a DIO3 rinse to reduce the wax removal time and remove wax residue completely. Replacing DI rinse with the DIO3 rinse resulted in a surface with a contact angle of less than 5˚, which indicates no further cleaning steps would be required. The particle removal efficiency (PRE) was further improved by combining a SC-1 cleaning step with the DIO3 rinsing process. A reduction in the process time was obtained by introducing DIO3 cleaning with a dewaxing process.

Polypropylene (PP) composites with wood flour/wax/coupling agent were manufactured by melt compounding and injection molding. The influence of wood flour(WF), wax, and coupling agent on the mechanical and thermal properties of the composites was investigated. The addition of wood flour to neat PP has the higher tensile modulus and strength compared with neat PP. The presence of wax also improved the tensile modulus. At the same loading of PP and WF, the addition of coupling agent highly decreased the tensile modulus, and increased the tensile strength. From thermogravimetric analysis (TGA), the addition of wax improved the thermal stability of the composites in the later stages of degradation. The presence of MAPP and wood flour in turn decreased thermal stabilities of composites. From differential scanning calorimetry analysis (DSC), neither the loading of wax. nor the presence of MAPP has shown significant effect on the thermal transition of composites.

This research was carried out to develop economical artificial diets of the greater wax moth, Galleria mellonella (L.). Diets were mixed with malt or sugar instead of whole honey for cheaper ones. Fecundity, developmental period, pupation rate, emergence rate and adult longevity of G. mellonella depending on diet were examined. The head width and length of larvae were not significantly different among diets tested. However, the weight of larva was the heaviest, 255.5 ㎎, at 1/2 honey + 1/2 malt diet and lightest, 144.3 ㎎, at sugar diet. The weight of pupa was also the heaviest at 1/2 honey + 1/2 malt representing 196.7 ㎎. Larval period was the shortest at honey diet as 30.9 days but the longest at sugar diet as 36.5 days. Pupation and emergence rates were over 79.3% at all diets. The longevity of mated females was ranged from 6.3 to 8.0 days and those of mated males ranged from 7.9 to 11.2 days. The highest number of eggs, 1269, was obtained at sugar diet. Artificial diets replaced by rice bran, malt, and sucrose reduced costs compared with wheat bran plus honey diet. The cost of rice bran was only 10% of wheat bran. Honey was much more expensive than malt and sugar, that is 6 and 13 times, respectively.

일반적으로 아스팔트 개질재의 경우 아스팔트 바인더의 고온 점성을 증가시킬 뿐만 아니라 믹싱 및 포설온도에서의 점도 또한 증가시켜 높은 생산온도 및 시공온도를 요구하게 된다. 이와 달리 Wax의 경우 아스팔트 바인더의 강성을 증가시키기도 하지만 일정 온도가 넘으면 물처럼 유동성을 확보해 믹싱 및 포설온도에서의 점도를 낮추어 작업성을 높이는 효과가 있다. 본 연구에서는 실내실험을 통해 PE Wax가 아스팔트 바인더에 첨가되었을 경우 그 특성을 분석하였다. 이를 위해 SBS, 폐타이어 고무분말 개질 아스팔트 바인더와 비교 분석하였다. 또한 Wax가 기존 개질재인 SBS, 폐타이어 고무분말과 함께 사용되었을 경우 그 효과를 분석하였다. 실험 결과, Wax type I은 내유동성 강화에 큰 효과가 있으며 작업성 개선에 약간의 효과가 있는 것으로 나타났다. Wax type II는 아스팔트 바인더의 작업성 개선에 크게 기여하고, 상온에서 부드러운 특성으로 균열에 대한 저항성을 증진시키는 것으로 나타났다.

In this experimental work, the development of a multicomponent binder system based on high density polyethylene (HDPE) and paraffin wax for Powder Injection Molding of Alumina parts was carried out. The optimum composition of the injection mixture was established through mixing torque measurements and a rheological study. The maximum powder loading was 58 vol%. The miscibility of organic components and the optimum injection temperature was evaluated by thermal characterization of binder and feedstock. The thermal debinding cycle was developed on the basis of thermogravimetrical analysis of the binder. After sintering the densities achieved were closed to 98% of the theoretical one.

In this work, the properties as polishing wax for automobile of O/W type microemulsion containing wax, liquid paraffine and quaternaryammonium salt was investigated. The microemulsions were prepared at 96~97℃ by the phase inversion method, and polyoxyethylene(20) sorbitan monooleate (POE(20)SMO) and distearyl dimethyl ammonium chloride(D.D.A.C) as the emulsifiers were used. The mean particle size of the rnicroemulsions was about 7±0.5nm and as the properties of polishing wax, gloss increased degree, water resistant gloss degree, initial and final contact angle after water resistance were tested. The result was that the value of water resistantance and contact angle were decreased with increasing amount of POE(20)SMO and D.D.A.C., while the gloss degree values did not affected. And the rnicroemulsion blended with mono ethylene glycol(MEG) of 5~15wt% showed smaller particle size and more stable particle size distribution than without MEG. Finally, this microemulsion showed more excellent values of gloss degree, the water resistant gloss degree and contact angle, than two kinds of commercial polishing wax for automobile.

Oxidized polyethylene wax is obtained by oxidation of polyethylene wax and it is composed of various chemicals, e.g., fatty acid, alcohol, ketone and ester. The application of oxidized polyethylene wax is determined by the composition of these chemical substances. In this basic study we observed the basic reaction parameters of time, temperature, oxygen concentration and catalysts on the oxidation reaction of low molecular weight polyethylene(PE wax) by analyzing the acid value, physical and chemical properties of oxidized PE wax to develop a new oxidation process. Acid values are increased with temperature increase in the rage of 150℃~180℃ but decreased beyond 190℃. Acid values are also increased with oxygen concentration. As the oxidation reaction proceeds the molecular weight and softening points of oxidation products are decreased by cracking reaction, but the viscosities are increased. To observe the crystallinity of oxidation products SEM experiment was performed. To obtain a high acid-value product in a mild condition, we adopted free radical catalysts and the acid value of the product using catalyst was higher than the product obtained without catalyst in the same reaction condition. The effective initiators were dicumyl peroxide(DCPO), t-butylperoxy-2-ethyl hexanoate(HOPO) and benzoyl peroxide(BPO) having long half-life.