In this study, the rate of change of electrical resistance with respect to the strength and load of cement composites was investigated by incorporating Carbon Nanotube(CNT) at 0.25, 0.5, 0.75, 1.0% of the binder weight. Compressive strength test It was shown that the load of 30% was repeatedly applied to impart conductivity through the rate of change of electrical resistance. The incorporation rate of CNT greatly affected the compressive strength and the rate of change of electrical resistance.

This paper presents the mechanical properties of high performance fiber-reinforced concrete composites(HFCC) according to binder replacement rate. the compressive strength and single-axial tensile strength of HFCC were evaluated according to binder replacement rete. As a result of the test, the compression strength decreased as binder replacement rates increased, and B-20 mix properties expressed the most ideal tensile strain-stress curve.

Recently, the evaluation of the grout chamber of PC bridges has been emphasized in order to prevent many problems in advance. This paper analyzes the electrical resistance of the MWCNT cement composites by electrode intervals in order to select the optimum electrode location for evaluation of grout chamber. It is concluded that the electrical resistance of the MWCNT cement composite specimens increase as the electrode interval is longer.

This paper was evaluated the mechanical propeties that compressive strength, splitting tensile strength and elastic modulous of self-healing solid type capsules mixed cement composites.

This study is an attempt as an introductive investigation on the mechanical characteristics of Vectran fiber cementitious composites. The mixing of Vectran fibers into cementitious binder was tried to fit suitable fiber volume fraction in order to get of high-ductile and high-strength cementitious composites. Compressive and tensile strengths of the composite were evaluated.

This paper investigates the effect of nanomaterials on the piezoresistive sensing capacity of cement-based composites. Carbon nanotube, graphite nanofiber filament, carbon fiber were considered along with a cement composite which is included slicafume. After deriving optimum flowability, cement composites contained carbon materials were made respectively. Then, cyclic compressive test was performed with cement composite that contained 5% of each nano material.

이 연구에서는 PE 섬유를 사용한 고연성 시멘트 복합체에 대해 최대입경 4.75 mm의 일반모래(강모래)를 규사와 서로 다른 비율로 혼합하여 사용하였을 때, 그에 따른 고연성 시멘트 복합체의 인장거동 변화를 실험을 통해 살펴보고자 하였다. 유동성 평가 실험에서는 강모래 치환율이 증가함에 따라 유동성이 증가하는 것으로 나타났다. 압축강도는 평균압축강도에는 큰 차이가 없었으나, 편차의 크기가 강모래 치환 율이 증가할수록 증가하는 것으로 나타났다. 일축인장시험 결과에서는 강모래 치환율에 따른 인장강도의 변화는 거의 없는 것으로 나타났으 며, 인장변형률 성능에서는 강모래 치환율이 증가함에 따라 향상되는 결과를 나타내었다. 강모래 치환율이 증가함에 따라 다중균열의 분포밀 도가 증가하면서 인장변형률 성능의 향상된 것으로 보인다. 한편, 인장변형률 성능의 편차는 압축강도에서와 마찬가지로 강모래 치환율이 증 가함에 따라 커지는 양상을 나타내었다. 이 연구를 통해 규사 대신 일반모래를 사용한 경우에도 고연성 시멘트 복합체의 인장거동의 변동성은 증가하지만, 규사를 사용한 고연성 시멘트 복합체와 비교할 때 등가 이상의 인장성능을 나타낼 수 있음을 확인하였다.

In this study, We evaluated the flexural behavior of high performance fiber reinforced cementitious composite (HPFRCC) with single steel fibers. to do this, we considered different types of steel fibers such as hooked, twisted and straight fibers. Test results indicated the flexural performance tends to increase as the incorporation rate of steel fiber increases and when the length of the fiber is long and at the high volume fractions(vf of 2.0) the flexural high performance was reduced.

In case of high performance fiber reinforced cementitious composite(HPFRCC) specimens with steel fiber of 30mm they exhibited poorer flexural strength than the straight fibers at a higher than 1.5% compared to steel fiber of 13mm and 19.5mm. In this study, Therefore we evaluated the flexural strength and cracking behavior of HPFRCC with steel fiber type such as fiber length, volume fraction.

This study was aimed to investigate the tensile behaviors of PE fiber-reinforced highly ductile cementitious composites with different combinations of micro silica sand and normal sand with maximum particle size of 4.75mm. This study presented the feasibility of using normal sand instead of micro silica sand for highly ductile cementitious composites with equivalent or better uniaxial tensile performance.

This study was aimed to investigate the effect of aggregate size on the tensile behavior of highly ductile fiber-reinforced cementitious composites. Partial applying 5.6mm coarse aggregate instead of micro silica sand was considered. It was revealed that the fiber-reinforced cementitous composites with 5.6 mm coarse aggregate as well as micro silica sand still showed enough tensile strain capacity more than 5% and limited crack width less than 150 ㎛.

This paper describes the electrical characteristics of carbon fiber reinforced cement composite under compressive loading. The test results indicated that the electrical resistance changes of cement composite in compression were improved with increasing carbon fiber volume fractions.

It is known that all of structures be old enough not to use as time elapses, and the degree of deterioration depends on the environmental conditions and maintenance activity. Specific repair for deteriorated structures should be applied and the performances are greatly affected by materials used and location of members allocated. This study is to evaluate the enhancement of steel pipe pile in terms of performance when they are reinforced by carbon-fiber composite for underwater.

This study was aimed to investigate the effect of aggregate size on the tensile behavior of highly ductile fiber-reinforced cementitious composites. Partial applying 5.6mm coarse aggregate instead of micro silica sand was considered. It was revealed that the fiber-reinforced cementitous composites with 5.6 mm coarse aggregate as well as micro silica sand still showed enough tensile strain capacity more than 5% and limited crack width less than 150 ㎛.

This study was aimed to investigate the effect of aggregate size on the tensile behavior of highly ductile fiber-reinforced cementitious composites. Partial applying 5.6mm coarse aggregate instead of micro silica sand was considered. It was revealed that the fiber-reinforced cementitous composites with 5.6 mm coarse aggregate as well as micro silica sand still showed enough tensile strain capacity more than 5% and limited crack width less than 150 ㎛.

This paper describes the electrical characteristics of carbon fiber reinforced cement composite under compressive loading. The test results indicated that the electrical resistance changes of cement composite in compression were improved with increasing carbon fiber volume fractions.

It is known that all of structures be old enough not to use as time elapses, and the degree of deterioration depends on the environmental conditions and maintenance activity. Specific repair for deteriorated structures should be applied and the performances are greatly affected by materials used and location of members allocated. This study is to evaluate the enhancement of steel pipe pile in terms of performance when they are reinforced by carbon-fiber composite for underwater.

Multi-Walled Carbon Nanotubes (MWCNTs) were modified with epoxy and aminosilane diethanolamine (DEA), and nanocomposites of poly(butylene adipate-co-terephthalate) (PBAT) and the modified MWCNTs were prepared with the aim of improving the physical properties of biodegradable PBAT. The physical and the thermal properties of the PBAT/MWCNT nanocomposites were investigated using various techniques. Fourier transform infrared spectroscopy measurements revealed that the MWCNTs were efficiently modified with DEA. Scanning electron micrographs of the nanocomposites indicated that the modified MWCNTs were dispersed homogeneously in PBAT. The thermal stability of the nanocomposite decreased with increase in the content of epoxy-MWCNT-DEA due to the poor thermal stabilities of epoxy and amino silane DEA. However, the surface hydrophobicity of the nanocomposite increased. The highest stress (170% of PBAT) was observed when the content of epoxy-MWCNT-DEA in the nanocomposite was 2 wt%.

본 연구에서는 시멘트 복합체의 균열을 자기치유 할 수 있는 자기치유 캡슐을 제조하기 위한 일환의 기초 연구로써 자기치유 캡슐 용 코어재료에 무기계 기반 코어재료를 적용하기 위하여 액상형태의 무기 소재를 기반으로한 코어재료를 제조하였다. 제조된 무기계 기반 코 어재료는 캡슐화를 진행하기 전에 무기계 기반 코어재료를 직접 시멘트 복합체에 적용하여 균열부의 균열수복 성능뿐만 아니라 시멘트 복합 체의 성능에 미치는 영향을 검토하였다. 평가결과, 무기계 기반 코어재료는 압축 및 부착강도 향상효과가 있는 것을 확인하였으며, 부착, 내흡 수, 내투수 및 동결융해 저항 성능을 가진 것으로 판단된다. 본 논문의 결과를 통하여 자기치유 캡슐용 무기계 기반 코어재료를 적용할 경우에 얻을 수 있는 시멘트 복합체의 성능 및 차후 진보화된 자기치유 캡슐기술의 기반 자료로써 활용하고자 한다.