세립의 포리에틸렌, 카펫부산물, 시멘트와 라텍스로 코팅된 매끄럽고 둥근 규사질의 강자갈을 가지고 실험적인 조사가 이루어졌으며 아스팔트 혼합물 공시체를 만들었다. No. 4번체 이상에 남아 있는 골재만 코팅을 하였다. 개념은 매끄럽고 둥근 강자갈을 코팅함으로서 표면 거칠기를 증가시켜 공학적 특성이 우수한 혼합물을 만들어 내는 것이다. 표준 테스트와 비표준 테스트를 이용하여 아스팔트 혼합물 공시체를 평가하였다. 코팅과정과 제한된 혼합물 공시체 테스트 결과에 근거하여 다음과 같은 결과를 얻을 수 있었다. 세 가지 종류로 코팅된 골재를 사용한 혼합물들은 Hveem과 Marshall 안정도, 인장강도와 회복탄성계수가 증가되었으며 이는 코팅되지 않은 골재로 만든 혼합물과 비교하여 소성변형과 균열저항성이 향상된 것으로 판단할 수 있다.

Recycling industrial wastes such as fly ash from a coal burning heat power plant and shell from an oyster farming were investigated to prevent environment contamination as well as to enhance the value of recycling materials. In this study, the lightweight aggregates and the red bricks were fabricated from fly ashes with other inorganic materials and wastes. The starting materials of the lightweight aggregate were fly ash powder and water glass, and the compacts of these materials were heat treated at . The fabricated lightweight aggregates had low bulk density, , hence floated on the water and had the strength of 7.0-11.0 MPa and the modulus of 2900-3300 MPa which indicates it has enough strength as the aggregate. Another type of the light weight aggregate was prepared from fly ashes, shell powders and clays. The bulk density, porosity, and compressive strength of these aggregates were and 5-12 MPa, respectively. The addition of a small amount of fly ash powder prevented hydration of the light weight aggregates. The red brick was also fabricated from the fly ash containing materials. It is suitable for the brick facing of a building as it has moderate strength and low water absorption rate.

건설폐기물의 재활용방법 중 하나는 폐콘크리트 재생골재를 도로포장재료로 활용하는 것이다. 하지만 재생골재에 대한 많은 연구와 기술개발에도 불구하고 생산공정에 포함된 이물질 때문에 실제 도로포장재료로의 적용은 미비한 실정이다. 본 연구에서는 재생골재내에 포함된 이물질의 특성에 따라 무기이물질과 유기이물질로 구분하였으며 , 각 이물질이 포장 공용성에 미치는 영향을 제시하였다. 또한 재생골재내에 포함된 무기이물질 함유량과 압축강도와의 관계, 유기이물질 함유량과 수정 CBR과의 상관관계를 통하여 도로포장층인 린콘크리트 기층과 보조기층에 적용 가능한 이물질 함량기준을 제시하였다. 린콘크리트 기층에는 무기이물질 함유량 질량비 10% 이하, 입상재료 보조기층에는 유기이물질 함유량 부피비 2% 이하일 때 재생골재를 포장에 적용 가능한 것으로 나타났다.

본 연구는 재생골재를 도로의 보조기층재료 및 포장용 콘크리트 골재로 사용하기 위하여 수행되었다. 우선 보조기층재료로서의 활용성 여부를 파악하기 위하여 실내다짐시험, CBR 시험, 평판재하시험을 수행하였으며, 콘크리트용 골재로의 활용성을 보기 위하여 재생골재 첨가비율을 0, 20, 40, 60, 80%로 하여 설계기준강도 280kgf/cm2인 표층용 콘크리트를 제조하였다. 제조된 콘크리트로 굳지 않은 콘크리트 성질과 28일 양생 후 강도시험과 동결 융해에 따른 내구성 시험을 통해 폐콘크리트 재생골재의 활용성을 도로포장재료 측면에서 검토하였다. 실험결과 재생골재는 보조기층재료로서의 사용이 충분히 가능하며 표층용 콘크리트 골재로서 재생골재 첨가비율 40%까지 활용이 가능함을 알 수 있었다.

본 연구는 재생골재를 도로의 보조기층재료 및 포장용 콘크리트 골재로 사용하기 위하여 수행되었다. 우선 보조기층재료로서의 활용성 여부를 파악하기 위하여 실내다짐시험, CBR 시험, 평판재하시험을 수행하였으며, 콘크리트용 골재로의 활용성을 보기 위하여 재생골재 첨가비율을 0, 20, 40, 60, 80%로 하여 설계기준강도 280kgf/cm2인 표층용 콘크리트를 제조하였다. 제조된 콘크리트로 굳지 않은 콘크리트 성질과 28일 양생 후 강도시험과 동결 융해에 따른 내구성 시험을 통해 폐콘크리트 재생골재의 활용성을 도로포장재료 측면에서 검토하였다. 실험결과 재생골재는 보조기층재료로서의 사용이 충분히 가능하며 표층용 콘크리트 골재로서 재생골재 첨가비율 40%까지 활용이 가능함을 알 수 있었다.

In this study, basic research was carried out to improve the absorption rate which is a problem in increasing the recycling rate of recycled fine aggregate and to improve the usability as concrete aggregate. It was confirmed that the absorption rate of the recycled aggregate measured after immersing in the microbial culture solution for the purpose of improving the absorption rate of the circulating fine aggregate for concrete was decreased. However, further studies such as improvement of microbial culture are required to satisfy KS standards.

In this study, structural tests were performed for the para-aramid fiber-reinforced RC beams using Recycled Coarse Aggregates (RCA) according to the main parameters which are RCA replacement ratio (0 and 30%) and para-aramid fiber volume fraction (0, 0.75 and 1.0%). Experimental results show that by reinforcing para-aramid fibers, compared with the natural coarse aggregate, the RCA, which exhibited low structural performance, improved load carrying capacity and ductility.

In this study, hydration heat, autogenous shrinkage and compressive strength of the specimens has been verified with moisture supply on the hardened cement paste depending upon the difference in moisture condition of the fine aggregates. The result showed that, autogenous shrinkage was significantly reduced and also the compressive strength was improved due to the continuous moisture supply regarding on fine aggregates.

This study is an experimental program developed to estimate the effect of size on the shear performance of reinforced concrete (RC) beams with stirrups made from recycled coarse aggregates (RCA). The test was conducted on eight RC beams with shear reinforcement, and the main variables were section size and RCA replacement ratio (Rr = 0% or 30%). The tension reinforcement ratio (ρ = 0.012), shear span-to-depth ratio (a/d = 1.5), and width-to-depth ratio (h/b = 1.5) were fixed. Empirical test results, theoretical results, and code calculations were compared for each specimen. The results demonstrated that the empirical test results of each sample compared favorably with the theoretical calculations within a sufficient safety margin (1.32-2.61). Also, a comparison between RCA-RC beams with Rr = 30% and RC beams containing natural coarse aggregates (NCAs) showed that the two beams exhibited similar load-displacement curves and shear strengths. Consequently, RCA-RC beams made using a RCA replacement ratio of up to 30% do not cause safety or serviceability problems.

The aim of this study is a large amount use of recycled aggregates. The considering recycled aggregates replacement ratio is 50% that of natural aggregates. In order to increase the shear capacity of beams, that may be weaken by use of recycled aggregates, steel fibers are reinforced. The main variables are steel fiber volume fractions such as 0%, 0.5%, 0.75% and 1.0%. After the test, it could confirm that the strength and deformation capacity of beams with the steel fiber content values of 0.5% and 0.75% are comprehensively enhanced compared to non reinforcement. After evaluating the shear strength by using shear strength equations of previous researches, it concluded that the strength equation of Oh et al. (2008) is able to predict the shear strength of SFRC beams on the safety side.

이 연구에서는 부순골재 생산과정에서 발생하는 다량의 골재 미분말이 콘크리트의 성질에 미치는 영향을 살펴보고자 하였다. 골재 미분말을 잔골재 중량의 0~30 wt.% 범위로 치환한 콘크리트에 대해 슬럼프, 공기량, 강도 및 건조수축 변화에 대한 실험을 실시하였다. 실험 결 과, 골재 미분말의 사용량이 증가함에 따라 슬럼프 및 공기량이 크게 저하되는 것으로 나타났으며, 골재 미분말을 잔골재의 10~30% 치환하여 사용하였을 때 압축강도 및 인장강도가 골재 미분말을 사용하지 않은 경우에 비해 약간 증가되는 것으로 나타났다. 건조수축 변형률은 골재 미 분말 사용량이 증가할수록 더 커지는 것으로 나타났다. 동일한 물시멘트비, 단위시멘트량에 대해 골재 미분말을 사용하면서 골재 미분말을 혼 합하지 않은 콘크리트와 유사한 작업성을 얻기 위해 고성능감수제를 적절량 사용한 경우, 사용량에 따라 공기량은 약간 증가하고, 강도 및 건 조수축 변형률은 큰 변화가 나타나지 않았다.

KS기준 및 콘크리트표준시방서에는 순환골재를 사용한 콘크리트의 압축강도를 27 MPa 이하로 제한하고 있으며, 이에 따라 27 MPa를 초과하는 순환골재 콘크리트에 대한 역학적 특성에 대한 연구결과는 부족한 상황이다. 따라서, 이 연구에서는 순환굵은골재 사용의 확 대를 위해 압축강도 30∼60 MPa 범주의 굵은순환골재를 사용한 콘크리트의 압축강도를 포함한 역학적 특성을 연구하였다. 실험변수로써 물- 시멘트 비와 굵은순환골재의 치환율을 고려하였다. 고려된 물-시멘트 비는 0.36, 0.46 및 0.53 이고, 순환굵은골재의 치환율은 30, 50, 70 및 100%이다. 실험변수에 따른 순환골재 콘크리트의 7일 및 28일 압축강도, 탄성계수, 인장강도 및 파괴계수 특성을 분석하였다. 물-시멘트 비가 0.36일 때의 탄성계수에 비해 0.53일 때의 탄성계수는 10% 이상 감소하였다. 탄성계수 실험결과와 기존설계코드에 의한 탄성계수 예측결과를 비교하였으며, 설계코드에 의한 탄성계수 예측결과는 실험결과를 과다평가하고 있다. 반면에 설계코드에 의한 파괴계수 예측결과는 압축강 도 40 MPa 이상의 콘크리트의 파괴계수 실험결과를 과소평가하고 있다.

Using of the recycled aggregates is strongly promoted to use the national resources efficiently and enhance the recycling rate of construction wastes. However, the negative impact is expected by the alkalinity elution characteristic to the water quality and soil ecology in the region where could be contacted by water like ground water, river, area nearby coast, and etc. For this reason, we developed the pH test method to use the recycled aggregate in the drainage layer and analyse the pH concentration of the sort of time change and particle size. By the ‘Korean Standard Method for Waste’, the pH concentration was ranged from 10.78 to 11.72, by the ‘Korean Standard Method for Soil’, the pH concentration was ranged from 10.73 to 11.97, by the developed pH test in this study, the pH concentration was ranged from 10.82 to 11.71. There was no difference in the pH concentration in relation to the stirring time and the spread of particle size.

In this study, we examined the liquid carbonation reaction using recycled aggregates as an industrial by-products. This research deals with carbon fixation with a precipitation reaction utilizing 5 wt% and 30 wt% alkanolamine absorbents in an aqueous calcium oxide solution. Unlike carbon fixation operated at high temperature and pressure that consumes a lot of energy, we conducted experiments at moderate temperature (303.15 K) and pressure (1 atm). By adding calcium oxide solution into the carbon dioxide saturated solution, carbonated recycled aggregate was formed. To verify the physical properties of products, XRD analysis was performed and SEM images were obtained.

Based on the paper study of recycled aggregates production method and registrated patents , it was found that the structural use of recycled aggregates was few. And it was caused by high production costs and lack of researches.

This study reviews past literatures relevant to concrete beams using recycled aggregates (RAs) and investigate existing shear design equations for reinforced concrete (RC) beams. Then, a simplified, emprical design equation to determine the shear strength of high strength RC beams with RAs is proposed and compared with existing equations. The analysis indicated that the proposed equation provided the most accurate estimated of strength of high strength concrete beams with RAs.

This research provides the analyzing case of abnormal expanding of concrete including steel slag aggregate as a recycled aggregate. To determine the reason of abnormal expansion, the components of concrete were searched and the aggregate was found out as a reason of this expansion. The aggregate used was a type of steel slag aggregate without any specific treatment for volumetric stability such as fast-cooling or aging. SEM observation of the aggregate and XRD analysis of the cement paste were conducted and it was found out that the surface of the aggregate is very rough and the cement paste contained a lot of calcium and magnesium. From this research, it is considered to contribute on providing the actual case of failure using steel slag aggregate for concrete.

In this study, from the material properties of the aggregates into the actual applications were evaluated for utilizingthe air-cooled blast furnace slag as the coarse aggregates (SG) in PHC piles. The physical and chemical characters ofthe SG were satisfied the standards presented in KS F 2544 for concrete blast furnace slag aggregates. And it was satisfiedthe environmental-factor-evaluation, including the soluble, heavy metal elution and total mercury content, and etc. In casethe non-washed type SG is used, the S/A ratio adjustment according to micro-powder of the aggregate surface and chemicaladmixture adjustment are needed in order to satisfy the aimed material properties. As the replacement ratio of SGincreased, the manifestation rate of compressive strength of the PHC piles was decreased. Particularly, in case non-washingtype SG, the manifestation rate more decreased. Therefore, the elimination of the pop-out materials and cleaning processare necessary for the production process for using the SG as coarse aggregates of PHC Piles

In this study, it was developed hybrid fiber reinforced concrete using ground granulated blast furnace slag, the industrial wastes, and recycled aggregate. As a result of experiments on improvement of performances of eco-friendly buildings utilizing recycled resources (recycled coarse aggregates and ground granulated blast furnace slag), the following conclusions are drawn. As hybrid fiber(PVA Fiber+ Steel Fiber) was mixed with the concrete in which the replacement was conducted with recycled coarse aggregates and ground granulated blast furnace slag, the structural performance were increased.