본 연구는 유기액비 재료가 유기액비 제조시 화학적 특성 변화에 미치는 영향을 구명코자 충청북도농업기술원 플라스틱하우스에서 수행하였다. 계분, 대두박, 쌀겨 등 3처리를 하였다. 본 시험에서 얻어진 결과를 다음과 같이 요약할 수 있다. 액비 원료의 총 질소 함량은 대두박이 55 mg·kg−1으로 가장많았으며, 인산과 칼륨 함량은 계분에서 가장 많았다. 계분의pH는 중성에 가까웠으며, 대두박과 쌀겨는 강산성을 띠었다. 계분 액비의 EC는 발효기간이 증가할수록 증가하였고, 대두박과 쌀겨 액비는 발효기간 중 증가하다가 감소, 증가하는 경향이었다. 계분 액비의 황화수소 발생량은 발효 후 2주차에는3,200 mg·L−1이었으나, 발효 12주차에는 1,600 mg·L−1으로 감소하였고, 대두박과 쌀겨 액비는 발효 과정중 황화수소 가스가 발생하지 않았거나 거의 발생하지 않았다. 질소와 칼슘 함량은 계분 액비와 대두박 액비에서 가장 많았다. 인산, 마그네슘의 함량은 쌀겨 액비에서 각각 5.6 g·kg−1, 1.5 g·kg−1으로 가장 높았다. 칼륨은 처리에 따라 4.3-4.4g·kg-1으로 차이가 없었다.

For advanced drinking water treatment of high turbidity water, we used the hybrid process that was composed of photocatalyst packing in space of between outside of multi-channel ceramic microfiltration membrane and membrane module inside. Photocatalyst was polypropylene (PP) beads coated TiO2 powder by CVD (chemical vapor deposition) process. Instead of natural organic matters (NOM) and fine inorganic particles in natural water source, standard NOM solution was prepared with humic acid and kaolin. Water-back-flushing of 10 sec was performed per every period of 10 min to minimize membrane fouling. Resistance of membrane fouling (Rf) increased and J decreased as concentration of humic acid changed from 2 mg/L to 10 mg/L, and finally the highest total permeate volume (VT) could be obtained at 2 mg/L. Then, treatment efficiency of turbidity and UV254 absorbance were above 96.4% and 78.9%, respectively. As results of treatment portions by membrane filtration, photocatalyst adsorption, and photo-oxidation in (MF), (MF + TiO2), (MF + TiO2 + UV) processes, turbidity was treated little by photocatalyst adsorption, and photo-oxidation. However, treatment portions of UV254 absorbance by adsorption (MF + TiO2) and photo-oxidation (MF + TiO2 + UV) at humic acid of 4 mg/L and 6 mg/L were above 9.0, 9.5 and 8.1, 10.9%, respectively.

There has been a growing concern about the emissions of formaldehyde and VOCs from automotive interior materials which could have an important impact on the in-vehicle air quality(IVAQ) of automotive vehicles. Many leading automobile manufacturers have now introduced their own specification standards for testing and limiting emissions from products produced by their suppliers. In addition, ISO (International Standard Organization) has been established ISO 12219-1, 2, 3, 4, 5 to determine the emissions of volatile organic compounds from automotive vehicle. The objective of this paper is to compare the area specific emission rates determined from surface emissions testing using the microchamber(MC) in comparison with a 1 m³ emission test chamber(ETC) operated in accordance with ISO 12219-3, ISO 12219-4. Measured emission concentrations in absolute terms were different between Microchamber and 1 m³ chamber. However, qualitative comparison of the chromatograms shows that the Microchamber is able to perform a screening test

고탁도 원수의 고도정수처리를 위해 관형 세라믹 정밀여과막 외부와 원통형 막 모듈 내부 사이의 공간에 광촉매를 충전한 혼성 모듈을 사용하였다. 광촉매는 PP (polypropylene) 구(bead)에 TiO2 분말을 플라즈마 화학증착(chemical vapor deposition) 공정으로 코팅한 것이다. 정수 원수 중 자연산 유기물(NOM)과 미세 무기 입자를 대체하기 위해, 휴믹산(humic acid)과 카올린(kaolin) 모사용액을 대상으로 하였다. 혼성공정에서 막오염을 최소화하기 위해 10분 주기로 10초 동안 물 역세척을 시행하였다. 휴믹산을 10 mg/L부터 2 mg/L로 변화시킴에 따라, 막오염에 의한 저항(Rf)이 감소하고 J가 증가하여 2 mg/L에서 가장 높은 총여과부피(VT)를 얻었다. 탁도 및 UV254 흡광도의 처리효율은 각각 98.5% 및 85.7% 이상이었다. MF 공정 및 MF + TiO2 공정, MF + TiO2 + UV 공정의 막여과 및 광촉매 흡착, 광산화의 처리 분율을 알아본 결과, 광촉매 흡착과 광산화에 의해 탁도는 거의 처리되지 않았으나, 광촉매 흡착 및 광산화에 의한 휴믹산 처리 분율은 각각 10.7, 8.6% 이상이었다.

본 연구에서는 고도정수처리를 위하여 모듈 내부와 관형 세라믹 정밀여과막 외부 사이의 공간에 입상 활성탄(GAC)을 충전한 혼성 모듈을 사용하였다. 정수 원수 중의 자연산 유기물(NOM)과 미세 무기 입자를 대체하기 위해, 휴믹산(humic acid)과 카올린(kaolin) 모사용액을 대상으로 하였다. 혼성공정에서 막오염을 최소화하고 투과선속(J)을 향상시키기 위하여 10분 주기로 10초 동안 질소 역세척을 시행하였다. 그 결과, 휴믹산의 농도가 10 mg/L부터 2 mg/L로 단계적으로 변화시킴에 따라 막오염에 의한 저항(Rf)이 감소하고 J가 증가하여 2 mg/L에서 가장 높은 총여과부피(VT)를 얻을 수 있었다. 한편, 탁도 및 UV254 흡광도의 처리효율은 각각 99.36% 및 97.19% 이상으로 우수하였으나, 휴믹산의 농도 10 mg/L에서 활성탄 주입 없이 정밀여과 단독으로 UV254 흡광도의 처리효율은 90.84%로 다소 감소하였다.

We proposed the new nano-carbon ball (NCB) materials for eliminating the total volatile organic compounds(TVOCs) from the felt which is built in the car. The concentrations of acetaldehyde and formaldehyde of the original felts were varied upon the different production lots. Acetaldehyde in the felt can be eliminated to target level(0.2μg) after introducing 0.5 wt% of NCB into the felt. Detector tube method for analyzing formaldehyde gas was more accurate than HPLC method. Formaldehyde can be eliminated to target level (64 ppb) after introducing 0.5 wt% of NCB into the felt. We also found that TVOC can be reduced to target level (0.32μg) after introducing 2.0 wt% of NCB. Upon introducing small amounts of NCB into the felt, it was possible that the level of formaldehyde, acetaldehyde and TVOC formed from the felts can be reduced to the target level. We also suggest the effective analyzing method of TVOCs.

실내 공기는 대기와는 달리 실내 건축 자재에서 유래된 물질로 오염될 수 있다. 본 연구는 실내자재인 카펫에서 방출되는 휘발성 유기화합물의 생물학적 영향을 평가하기 위하여 수행되었다. 카펫과 자주달개비 BNL 4430 꽃차례를 환경노출시험용기에 넣고 일정시간 노출을 실시하였고 흡착관의 VOCs에 대한 화학분석을 실시하였다. 화학분석결과 카펫에서는 12종의 VOCs가 방출되는 것이 확인되었으며 이중 스틸렌(71.9μg m-3)과 톨루엔(

In this study, we designed color of tunable and high efficient organic materials using the quantum dynamics and the semi-empirical calculation, and applied this results to the fabrication of organic light-emitting diodes. Also we optimized the molecular structure of phosphorescent materials and the energy transfer from a host to a dye which makes organic light-emitting diodes improve. Using quantum dynamics method, the molecular structures of ligand only and the whole metal chelate were optimized, and these energy levels were calculated. From this test results, we could understand the emission mechanism of phosphors with various ligands as well as design the proper ligands reducing the T-T annihilation and the carrier lifetime. We also could design ligands with various colors using this test method.

본 연구는 유기 EL의 기초연구로서， 특히 분자중심에 카르보닐기 혹유 산소원자를 갖는 히드라존계열의 유기형광체를 합성한 후, 얻어진 물질의 특정을 연구한 것이다. 본 연구에서는 알데히드류(p- 디에틸아미노벤즈알데히드， p-디에틸아미노벤즈알데히드，4-디페닌아미노벤즈알데히드)와 아민류(4.4' -디아미노벤조페논， 4-아마노페널에테르)를 반응시켜 합성하였다. 본 연구에서 합성한 형광체는 FT -IR, H-NMR분석에 의하여 그 구조를 확인했으며，열안정성，반응성 및 PL특성은 융점，수득율 및 발광스펙트럼측정으로 확인하였다. 본 연구에서 합성한 유기형광체의 발광스펙트럼은 564-596nm(오렌지색)과 612-681nm(적색)으로 확인되었다.

식물의 조직배양에서 가장 널리 이용되는 MS 배지 등의 무기성분은 종속영양에 적합하도록 조성되었다. 그러므로 이들 배지가 혼합영양이나 독립영양 배양에는 부적합 할 수 도 있다. 광혼합영양 미세증식에서 배지에 첨가되는 당의 수준은 낮추고 배양기의 광과 CO2 수준은 올리며, 광합성의 의한 탄소의 획득을 증진시키기 위해 열록소가 있는 절편체를 이용한다. Factorial 실험에서 유기물 (OM, m-3 배지당 각각 0.5g의 thiamine, nicotinic acid 및 pyridoxine과 100g · m-3 myo-inositiol)의 첨가(+)와 생략() 및 세 가지 수준의 당(0, 15 및 30 kg · m-3)이 감자 소식물체의 생장에 미치는 영향을 조사하였다. 단엽단절 절편체를 0.1×10-4m-3의 MS 아가(8 kg · m-3) 배지(증기소독 전 pH 5.80)배지가 담긴 유리 시험관(100mm×25mm)에 치상하여 직경 6mm의 가스투과 필터(5.1 air exchanges ·h-1)가 부착된 투명한 필름으로 봉하여 배양하였다. 배양체는 27일간 23℃, 50% RH에서 16 h · d-1의 명기 동안에 cool white 형광등으로 130μmol · m · s-1 PPFD의 광과 350-450μmol · mol-1의CO2가 공급되는 배양실에서 배양되었다. 유기물이 공급된 처리(+OM)와 공급되지 않은 처리(-OM)에서 감자 소식물체의 생육은 유사하였으나 배지의 pH는 후자에서 0.2 더 낮았다. 배지에 첨가된 당의 수준이 증가할수록 건물중, % 건물율 및 경경은 증진된데 반해 신초와 뿌리의 건물중 비율, 엽면적, 건물중당 엽록소 함량 및 배지의 pH는 감소하였다. 유기물과 당 수준간의 상호작용도 신초길이와 배지 pH에서 관찰되었다. 이상의 결과로부터 광도와 CO2농도를 높인 광혼압영양배양에서 감자 소식물체의 생장에는 배지에 첨가되는 당은 유익하지만 그 이외의 유기물은 첨가하지 않아도 악영향이 없다는 것은 나타낸다.

분리막을 이용한 정수처리 공정의 최적화를 위하여 유기물 성분인 humic acid와 탁도를 유발하는 kaolin을 모사 용액으로 제조하여 막내 비저항 값을 최소화하면서 flux의 안정된 경향을 나타내는 최적의 운전 조건을 검토하여 보았다. 그 결과 압력이 증가함에 따라 낮은 비저항값에서 효율적인 분리막을 운전할 수 있으며 선속도가 증가함에 따라 높은 전단율에 의해 cake load는 줄어들었으며 이에따라 비저항값과 flux는 증가하는 경향을 나타내었다. 따라서 최적의 운전조건은 압력 2.0 kgf/cm2, 선속도 0.92 m/sec으로 알 수 있었다.

White emission is important for applying organic EL devices to full-color flat panel display and backlight for liquid crystal display. In order to obtain white emission, the use of a light-emitting material which shows the white emission by itself is advantageous for these applications because of its high reliability and productivity. A chelate-metal complex such as zinc bis(2-(2-hydroxyphenyl) benzothiazolate) (Zn(BTZ)2 was known to emit white light with a broad electroluminescence. In this study, the electroluminescent characteristics of Be(BTZ)2 and Mg(BTZ)2, as well as Zn(BTS)2 were investigated using organic electroluminescent devices with the structure of ITO/TPD/ Be(BTZ)2, Mg(BTZ)2, or Zn(BTZ)2/Al. It was found that the device containing Be(BTZ)2 showed the highest power efficiency.

The effect of a-sexithiophene(α-6T) layers on the light emitting diode (LED) were studied. The α-6T was used for a buffer layer in electroluminescent (EL) devices. Enhanced carrier (hole) injection and improved emission efficiency were observed. Carrier injection characteristics were investigated as a function of α-6T later thickness. The efficiency of the electroluminescence was proportional to the thickness of α-6T layer. The highest efficiency was observed 600A of α-6T later, which was about 1.5 times higher than that of device without α-6T later. The device with a-6T showed an operation voltage lowered by 2V. The α-6T layer can substitute hole blocking layer, and control charge injection properties.

This study performed to conduct a test to increase the amount of appropriate organic matter input to organic upland soil, soil fertility, and its effect on the chemical changes and yield of corn in soil due to organic use. The pH level of the T1, T5, and T6 treatment zones where livestock excreta was used was raised to 6.0-6.5, the optimal range of the soil in Korea, and it was confirmed that the pH value was appropriate. Electrical Conductivity (EC), organic content (OM), and total nitrogen (T-N) were also identified as a trend of continuous increase. The quantity of corn gradually increased from 74.1% to 96.4% over the four-year period with the use of organic materials compared to the beginning of the test, and the utilization efficiency of nitrogen has also increased. The results of the study were found to have been able to examine the increase in quantity and changes in soil chemistry through crop cultivation using organic materials such as natural materials, green manure crops , and livestock manure compost, and it is also believed that the changes due to various factors such as soil environment, soil microbes, and climate conditions need to be made through continuous research.

Background : Insect pests damages are increasing on the field of Lycium chinense under organic farming management and especially, pest damage of Gelechiidae (Ilseopsis parki Povolny) is serious. Currently, various organic farming materials are registered, but insecticidal activity against Gelechiidae was not verified. Therefore, this experiment was carried out to screening for effective organic farming materials showing insecticidal activity in Gelechiidae. Methods and Results : Screening for effective organic farming materials (OFM) showing insecticidal activity in Gelechiidae, we screening OFMs through in vitro testing Among them, OFMs showing insecticidal activity were first selected through field test. In the field test method, OFMs was sprayed at the time of moth occurrence, after 5 days of treatment, insecticidal activity was investigated as a result, a total of five OFMs were selected through the in vitro test and the Sophora japonica and three plant extracts showed the best control effect at 81.7%. in 2017. In 2018, the 2017 selected OFM and 4 kinds of new OFMs were field tested. The field test was performed in the same method as before. As a result, 2 kinds of OFMs made of Sophora japonica and three plant extracts extract and Sophora flavescens extract showed high control value of 87.3% and 88.3%, respectively. In contrast one organic agricultural material showed a chemical injury. To determine the timing of control, the extract was treated before and after topping and pretreatment of topping showed better control value by 80%. Conclusion : Insecticidal activity against Gelechiidae was not effective in all tested OFMs, but the 2 OFMs showed a high control value of over 80%. In this study, we selected 2 materials out of 9 OFMs against Gelechiidae, and It was effective to treat OFM before topping.

This experiment was carried out to determine the optimal concentration of agricultural organic materials using sulfur and oil for the insect pest control in pepper and cherry tomato cultivation. The control value of aphids and Oriental tobacco budworm (OTB) was examined one day after spraying with sulfur preparation (SP) (0.33~0.17%), oil preparations (OP) (2.00~0.33%), SP+OP, OP+ginkgo leaf extracts (GLE), SP+OP+GLE on the “Super Manidaa”pepper. The aphid control in pepper was complete by applications of SP+OP (0.25+1.00%) in the early growth stage and the control value was above 98.1% by the application of OP+GLE (1.00+1.00 %), SP+OP+GLE (0.25+1.0+1%), SP+OP+GLE (0.25+1.0+0.5%) in the middle to late growth stage while showing 0% in the control treatment. The OTB was completely controlled by the 3 times application with the high concentration of SP+OP (0.25+1.00%) in pepper cultivation. This result indicates that the oil and the sulfur preparations should be applied at low concentration before insect pests do not appeared, and then sprayed at the high concentration after they appear at pepper plant. The greenhouse whitefly in ‘Minichal’ tomatoes was completely controlled by three times application of SP (0.25~0.33), OP (1.0~2.00%). and all the treatment of SP+OP. However, continuous control with intervals of 1~3 days was considered favorable in the tomato plant. By the periodical control with agricultural organic materials using sulfur and oil, the greenhouse whitefly, which is a high-temperature insect pest, several moths of OTB did not occur at all. In conclusion, SP+OP (0.17%+0.33%) treatment was the most economical combination to control the aphid, OTB, and greenhouse whitefly in pepper and tomato cultivation when considering operating cost. In addition, we recommend that SP should not be sprayed on the plant shoots during the day time from July to August because of high temperature.