본 연구는 교통사고의 발생 유형과 교통사고 심각도(Severity)와의 관계를 규명함으로써 위험유형을 제시하고, 운전자 특성과 교통사고의 관계를 규명하고자 하였다. 교통사고 유형을 여덟 가지로 세분하고, 결과의 객관성 확보를 위해 안전벨트 착용여부를 추가하여 상해정도와의 관계를 분석하였으며, 위험그룹의 분류를 위한 운전자의 특성은 성별, 차종, 연령 등을 대상으로 하였다. 카테고리 자료의 분석을 위하여 로그-선형 모형 및 로짓 모형을 사용하였다. 분석결과 사고유형과 심각도와의 관계에서는 정면충돌 사고와 앞지르기시, 우회전시 사고가 부상 또는 사망사고에 연루될 가능성이 높았다. 위험그룹 분석에서는 20세 미만의 이륜차 운전자, 41세에서 50세까지의 택시 운전자가 가장 위험한 집단으로 분석되었으며 또한 남자보다는 여자가 승용차와 중형화물 등에 관계되었을 때 더 위험한 것으로 분석되었다. 따라서 교통사고 발생시 인명 피해를 줄이기 위해서는 정면충돌 사고와 앞지르기시, 우회전시 발생하는 사고를 줄일 수 있는 방안이 연구되어야 하고, 교통사고 취약계층으로 분석된 위험그룹에 대한 교통안전 교육 및 단속이 강화되어야 할 것이다.

현재 국도 PMS(Favement Management System)에서 적용하고 있는 보수공법결정체계는 소성변형과 균열의 기준치값에 대한 설정 근거가 명확하지 않다. 본 연구에서는 일반국도에서 아스팔트 콘크리트 포장의 보수 시 보수공법결정기준에 대한 근거를 제시하기 위한 것이다. 이를 위해 전국 일반국도 아스팔트 포장 구간을 대표할 수 있는 대표 구간을 선정하고, 포장전문가 패널(panel)을 선정하여 선정된 구간을 대상으로 패널이 대표구간을 평가하여 보수공법을 제안하였다. 포장전문가 패널이 대표구간을 평가한 결과를 분석하여 다음과 같이 보수공법 결정 기준의 근거를 마련하였다. 균열의 경우 절삭 덧씌우기를 요구하는 균열율은 35%, 덧씌우기 이상의 기준으로서 균열율 20%를 제안하였다. 소성변형의 경우 절삭 덧씌우기를 필요로 하는 소성변형 값은 13mm, 덧씌우기 이상을 요구하는 소성변형의 기준으로서 10mm를 사용할 것을 제안하였다.

For the safety and cost reduction in the navigation, the automatic and intelligent system has been developed for the vessel, and the most important factor in the system is to decide the collision risk exactly. In this paper, we propose an advanced collision risk decision system for collision avoidance of the system. The conventional researches using DCPA and TCPA for calculating the collision risk have a problem to produce a same collision risk regardless of bearings for the ships, if they are located in the same distance from own ship. To solve this problem, in addition to DCPA and TCPA, we introduce the factor of VCD(variation of compass degree) and constant, CR which derived from COLREG'72(International Regulation for Preventing Collision at Sea, 1972) for evaluating the collision risk including even the burden of own ship navigator due to the encountering angle of each vessels. We decided the collision risk legally by the rule considering the relative situation of vessels. And therefore, the proposed system has two advantages, of which one is to produce more detail collision risk and another is to reflect the real underway situation in conformity with the rule.

Lithium dihydrogen phosphate (LiH2PO4) powder was purchased from Aldrich Chemical Co. Fromthe scanning electron microscope (SEM) observation, these polycrystals have dimensions in the range of 25-250µm. The electrical conductivity was measured at a measuring frequency of 1 kHz on heating polycrystallinelithium dihydrogen phosphate (LiH2PO4) from room temperature to 493 K. Two anomalies appeared at 451K (Tp1) and 469 K (Tp2). The electrical conductivity reached the magnitude of the superprotonic phases: 3×10-2Ω-1cm-1 at 451 K (Tp1) and 1.2×10Ω-1cm-1 at 469 K (Tp2). It is uncertain whether the superprotonic phasetransformations are due to polymorphic transitions in the bulk, surface transitions, or chemical reactions(thermal decomposition) at the surface. Considering several previous thermal studies (differential scanningcalorimetry and thermogravimetry), our experimental results seem to be related to the last case: chemicalreactions (thermal decomposition) at the surface with the progressive solid-state polymerization.

Using the Malmquist productivity index, this paper compares the productivity of Korean manufacturing industries from 1999 to 2006. The malmquist productivity index has more advantages than previous methods such as solow model, endogenous growth theory. The malmquist productivity index can be decomposed productivity into two parts. The first part is an index of the technical efficiency change. This index has high value when the elements of production is used more efficiently. The second part is an index of technical change. This index has high value if the advent of new technology and process innovation occur.

This study was carried out to evaluate the Life Cycle Cost(LCC) of four types of BIPV(Building Integrated Photovoltaic) systems -Glass plus Granite, Crystalline BIPV, Crystalline BIPV + Glass plus Granite and See through Amorphous BIPV -which were vertically installed to generate the same capacity(2kW) and the same area. Initial investment costs, cost savings and maintenance costs had been predicted during the period of analysing the LCC of four types of BIPV(Building Integrated Photovoltaic) systems installed for the purpose of evaluating the LCC. In case of cost savings, it had been analyzed by measuring the amount of electric power generated, reduction in lighting load and heat & cooling loads through simulation. From this analysis, it was predicted that the See-through amorphous BIPV offering cost saving advantages demonstrated the economical efficiency similar to the Glass plus Granite when it is backed by more than 20 years of durability.

The bullwhip effect is known as the significant factor which causes unnecessary inventory, lost sales or cost increase in supply chains. Therefore, the causes of the bullwhip effect must be examined and removed. In this paper, we develop two analytical to

Atomic Force Microscopes(AFM) is used to scan surfaces of a sample by measuring the interaction between atoms on the sample and the extremely sharp probe tip, which is produced by micromachining. AFM can be used as an inspection equipment for microelectronics industry and also requires a vibration-free environment to provide its proper functions. However, all of machine foundations including the wafer fab floor show the great amount of floor vibrations which can cause bad effects on the AFMs. This paper deals with the permissible floor vibration level for AFM at a given resolution.