본 논문의 목적은 공간 트러스 비선형 해석기법에 대한 수치해석적 장단점을 비교하고, 효율적인 해석기법을 제안하는 것이다. 사용된 해석기법은 하중 제어법으로 뉴턴-랩슨법, 수정 뉴턴-랩슨법, 할선-뉴턴법, 하중-변위 제어법으로 호장법, 증분일 제어법, 그리고 본 논문에서 제안한 하중-변위의 복합적 제어법으로 복합 호장법 , 복합 호장법Ⅱ, 복합 증분일 제어법이 있다. 공간 트러스에 대한 해석기법의 효율성 평가를 위하여 해의 정확성, 수렴성, 계산시간 등을 제시된 예에 비교한 결과 본 논문에서 제안한 하중-변위의 복합적 제어법의 신뢰성을 입증하였으며, 기하학적 비선형 해석 및 좌굴후 거동의 추적에 있어서 효율적이었다. 특히, 자유도수가 많은 공간 트러스의 좌굴하중 추척에 있어서는 복합 증분일 제어법이 효율적이었다.

The objective of this study is the development of size, shape and topology discrete optimum design algorithm which is based on the genetic algorithms. The algorithm can perform both shape and topology optimum designs of trusses. The developed algorithm was implemented in a computer program. For the optimum design, the objective function is the weight of trusses and the constraints are stress and displacement. The basic search method for the optimum design is the genetic algorithms. The algorithm is known to be very efficient for the discrete optimization. The genetic algorithm consists of genetic process and evolutionary process. The genetic process selects the next design points based on the survivability of the current design points. The evolutionary process evaluates the survivability of the design points selected from the genetic process. The efficiency and validity of the developed size, shape and topology discrete optimum design algorithms were verified by applying the algorithm to optimum design examples

In this paper, a study of 2-step damage detection for space truss structures using the extended Kalman filter theory is presented. Space truss structures are composed of many members, so it is difficult to find damaged member from the whole system. Therefore, 2-step damage identification method is applied to detect the damaged members. First, kinetic energy change ratio is used to find damage region including damaged member and then detect damaged member using extended Kalman filtering algorithm in damage region. The effectiveness of proposed method is verified through the numerical examples.

Generally, truss design has been determined by the designer's experience and intuition. But if we perform the most economical structural design we must consider not only cross-sections of members but also configurations(howe, warren and pratt types etc.) of single truss as the number of panel and truss height. The purpose of this study is to develope automated optimum design techniques for steel truss structures considering cross-sections of members and shape of trusses simultaneously. As the results, it could be possible to find easily the optimum solutions subject to design conditions at the preliminary structural design stage of the steel truss structures. In this study, the objective function is expressed as the whole member weight of trusses, and the applied constraints are as stresses, slenderness ratio, local buckling, deflection, member cross-sectional dimensions and truss height etc. The automated optimum design algorithm of this study is divided into three-level procedures. The first level on member cross-sectional optimization is performed by the sequential unconstrained minimization technique(SUMT) using dynamic programming method. And the second level about truss height optimization is applied for obtaining the optimum truss height by three-equal interval search method. The last level of optimization is applied for obtaining the optimum panel number of truss by integer programming method. The algorithm of multi-level optimization programming technique proposed in this study is more helpful for the economical design of plane trusses as well as space trusses.

본 연구에서는 트러스 구조물의 이산최적설계를 위해 유전알고리즘(GA)을 적용하였다. 확률론적인 절차를 통해 설계에 필요한 초기 집단을 생성시킨 후, 설계를 개선시키기 위해서 자연선택 및 적자생존의 원리를 적용하였다. 다하중조건 하에서 트러스 구조물의 중량 최소화를 위해 응력 및 변위 제약을 고려하였다. 먼저, 이미 잘 알려진 트러스 구조물에 대해서 GA를 이용하여 얻은 최적해와 기존 문헌들에서 제시하고 있는 값들을 비교함으로써 GA의 신뢰성 및 적용성을 검증하였고, 이러한 신뢰성 검증을 바탕으로 사용성 있는 트러스 구조물의 이산최적설계를 위해 현재 생산중인 강재제원표로부터 부재가 선택되도록 하였다. 강재의 단면으로는 L형강을 사용하였으며, L형강의 강종은 9개의 강종들 (SS 400, SWS 400, SMA 41, SWS 490Y, SWS 520, SMA 50, SWS 570, SMA 58) 중에서 설계자에 의해 자유롭게 선택되도록 하였다.

싱글트러스토마토시스템을 국내에 도입하여 효율적으로 생산관리를 하는데 필요한 자료를 제공하기 위하여 기존의 모델을 이용하여 지역별로 수확량, 수확시기를 예측하고 효율적인 생산관리 가능성을 분석한 결과를 요약하면 다음과 같다. 우리나라의 전지역이 겨울철에 최대수확 가능량을 달성하는데는 광량이 부족한 것으로 나타나 인공광을 이용한 생산량 증대가 가능할 것으로 판단되었다. 수원지역과 진주지역의 연간 총 수확량의 차이가 12kg.m-2 으로 나타나 토마토 온실의 설치 계획시 지역의 자연광 특성을 고려하여야 할 것으로 판단되었다. 지역과 계절에 따라 차이는 있으나 인공광을 이용하여 수확시기의 조절이 가능한 것으로 나타났다 인공광의 이용에는 많은 경비가 소요되기 때문에 인공광의 용량을 지역에 따라 적절하게 결정할 수 있는 방법과 저렴한 심야전기를 가능하면 많이 이용할 수 있는 인공광의 제어전략 등에 관한 추가적인 연구가 요구된다.

본 논문은 변위제약모드를 갖는 트러스구조물의 형태해석을 목적으로 하였으며, 이를 위하여 해의 존재조건과 무어-펜로즈(Moore-Penrose) 일반역행렬을 이용하였다. 또한, 수치해석과정에서의 변위제약모드로는 호몰로지변형(homologous deformation)을 고려하여 해석하였고, 다음으로 다양한 변위제약모드와 절점에 작용하는 하중비를 만족하는 구조물의 형태를 구하였다. 본 논문에서의 형태해석문제는 지정된 변위를 만족하는 구조물의 형태를 찾는 일종의 역문제(inverse problem)로서 일반적인 구조해석과정과는 반대되는 입장에서 접근하였다. 또한, 본 논문에서는 수치해석과정에서 근사해의 정도를 향상시키기 위하여 뉴튼-랩슨법을 사용하였고, 수치해석예제로서 부재의 배열형태에 따라 3가지모델을 선택하였으며, 이들 모델을 통하여 적용한 해석기법의 정확성과 효율성을 검증하였다.

최근, 텐세그러티(tensegrity)구조개념을 적용한 대공간구조시스템인 케이블돔구조는 구조물 전체의 관점에서는 하나의 자기평형상태를 만족하는 구조로서 돔과 같이 닫힌형상(closed form)의 구조에는 유리한 구조시스템이지만, 보울트(vault)와 같은 열린형상(openform)의 구조에는 적용상 문제가 있다. 따라서, 본 논문에서는 이 문제를 해결하는 방안중의 하나로서, 안정화된 단위요소를 이용하여 장력안정트러스의 기본요소인 단위구조의 안정화를 지배하는 기하학적 매개변수들의 범위를 설정하는 방법이 제안되고 그 변수들의 상호관련성을 규명하고자 한다. 수치해석은, .alpha.가 안정화범위에 있을 경우, 여러가지 경우의 높이에 따른 중심위치(.alpha.), 트러스 부재에 의한 각(.theta.) 그리고 평면상의 비(x/y)와 같은 매개변수의 변화에 따라 안정화에 가장 지배적인 축력모드(N15, N16, N25, N26)들의 상호작용이 조사되었다.

This research was an attempt to design a new structural concept of non-uniform reinforced and super concrete truss members applying by super concrete which has the compressive strength of 80-200MPa, the tensile strength of 8-20MPa, and the tensile strain of 1.0-5.0%. The super concrete truss members were designed by the Strut-Tie approach as well as aesthetic design concept. The structural performance of designed superconcrete truss was evaluated with the conventional reinforced concrete members.

In this study, the natural frequencies of long-span truss bridges with LRB were analyzed and compared. As a result of the mode analysis, a similar mode shape was shown irrespective of whether LRB was applied or not. The natural frequency analysis using the measurement data, the natural frequencies of the first to third transverse modes could not be analyzed due to the small dynamic response, and the natural frequency of the fourth vertical mode was analyzed to be similar to the mode analysis results. As a result of comparing the natural frequency of the vertical direction mode of 18 truss bridges in the past, the bridge with LRB was analyzed to have smaller natural frequency than the bridge without LBR.

In this study, multiple regression analysis was conducted using traffic volume, temperature and strain, which are maintenance data of suspension bridge(Diamond Bridge in Busan). As a result of analysis, the influence of independent variables on the dependent variable, strain, was found to be .304 for light and compact car traffic, .476 for large and special car traffic and .167 for the average temperature of reinforced truss

In this study, multiple regression analysis was conducted using traffic volume, temperature and strain, which are maintenance data of suspension bridge(Diamond Bridge in Busan). As a result of analysis, the influence of independent variables on the dependent variable, strain, was found to be .304 for light and compact car traffic, .476 for large and special car traffic and .167 for the average temperature of reinforced truss.

Shell structure that is best used for the long span structure is a structure which can effectively resist against the external load. But these structure has instability like snap-through and bifurcation buckling, and it has a characteristic sensitive to the initial conditions. Therefore, to determine the analysis model of DDOF Space Truss and when the beating load was applied in model, we confirmed the changing results for height and load.

The purpose of this study is to evaluate propriety of impact factor in railway design code about truss bridge with dynamic loading test. This study also analyzes and compares impact factor and railway design code. A impact factor of all members of the truss is lowered by revising railway design code in 2013. The result of this study indicates that a reasonable standard for impact factor is required, because current impact factor which is specified in railway design code could not properly reflect dynamic response of specific type and member.

The purpose of this study is to get analytic solution of space truss using homotopy perturbation. A homotopy perturbation was derived by formulating a governing equation for a space truss, and a semi analytical solution was obtained by homotopy perturbation. In conclusion, the analytical solution of the simple nonlinear model using the homotopy perturbation was compared with the numerical analysis result.

This study is to solve the structural optimization problem by a quantum-inspired harmony search algorithm. For the optimization, we suggest the mathematical modeling of the plane truss which is possible to minimum weight design. In its model, the cost function is minimum weight and constraint function consists of the stress.

In this study, the structural assessment on the effect of differential deformation of HDRB was performed for double deck warren truss bridge. The results show that the differential deformation of HDRB sharply decreases the safety rate of the superstructure of the bridge.

This study aims to apply homotopy method to space truss composed of discrete members to obtain a semi-analytical solution. For the purpose of this research, a nonlinear governing equation of the structures is formulated in consideration of geometrical nonlinearity, and homotopy equation is derived. The result of carring out dynamic analysis on a simple model is compared to a numerical method of 4th order Runge-Kutta method(RK4).

Recently a new damper system with Kogome truss structure was developed and its mechanical properties were verified based on the laboratory test. This paper presents a Kagome truss damper external connection method for seismic strengthening of RC frame structural system. The Kagome external connection method, proposed in this study, consisted of building structure, Kagome damper and support system. The method is capable of reducing earthquake energy on the basis of the dynamic interaction between external support and building structures using Kagome damper. The pseudo-dynamic test, designed using a existing RC frame apartment for pilot application of LH corporation, was carried out in order to verify the seismic strengthening effects of the proposed method in terms of the maximum load carrying capacity and response ductility. Test results revealed that the proposed Kagome damper method installed in RC frame enhanced conspicuously the strength and displacement capacities, and the method can resist markedly under the large scaled earthquake intensity level.