본 연구에서는 경기도내 유통되고 있는 심해성 어류 50 건을 대상으로 수은, 메틸수은의 오염도 및 셀레늄의 함 량을 알아보았다. 금아말감법의 수은분석기, ICP-MS를 사 용하여 측정하였으며 각 항목별 평균함량은 수은 0.7647 mg/ kg (0.0182-5.3620), 메틸수은 0.0764 mg/kg (0.0096-0.8750), 셀레늄 0.4728 mg/kg(0.1075-3.5100)으로 메틸수은은 50건 모두 기준규격(1.0 mg/kg) 이하로 나타났다. 셀레늄은 수 은과 결합하여 수은의 독성을 감소시키는 것으로 알려져 있으며, 본 연구과제에서는 일일평균섭취량이 3.3 μg/kg으 로 일일권장량보다 낮은 수치였다. 유해물질인 수은과 메 틸수은은 JECFA에서 설정한 PTWI의 5.7%, 1.8%로 조사 되었다. 따라서 도내에서 유통되는 심해성 어류의 수은, 메틸수은과 같은 위해중금속은 안전한 것으로 나타났지만 지속적 모니터링이 필요하다고 판단된다.

In this study, heavy metals (lead, cadmium, and mercury) and shellfish poisoning toxins (diarrhetic shellfish poisoning toxins, amnesic shellfish poisoning toxins) were investigated in a total of 104 shellfishes. According to the analysis of heavy metals, lead (Pb) was detected in the range of 0.0177-0.5709 mg/kg, cadmium (Cd) was detected in the range of 0.0226-1.4602 mg/kg, and mercury (Hg) was detected in the range of 0.0015-0.0327 mg/kg. Levels of Pb, Cd, and Hg were acceptable by Korean standards. Okadaic acid (OA) and dinophysistoxin-1 (DTX-1) were investigated for monitoring of diarrhetic shellfish poisoning toxins and OA and DTX-1 were not detected. As a result of monitoring of amnesic shellfish poisoning toxins, domoic acid was detected in 5 of 104 samples and detection ratio was 4.8%. The detection period was found as follows; 1 case in January, 1 case in February, 1 case in May, 2 cases in September. These showed that continuous monitoring for the management of shellfish poisoning toxins and heavy metals is required. In addition, this study can be used as reference data to strengthen managing heavy metals in fishery products.

본 연구는 2017년 국내에서 유통되는 유산균을 함유한 건강기능식품과 가공식품 120건에 대하여 프로바이오틱스 함량, pH와 산도를 분석하였다. 또한, 건강기능식품 중 프로바이오틱스 5개 제품에 대한 보존방법에 따른 변화를 조사하였다. 프로바이오틱스 제품 85건 중 2건이 표시량 이하였고, 가공식품 35건은 모두 적합이었다. 프로바이오틱스 제품의 프로바이오틱스수, pH, 산도 평균은 각각 1.2 × 1010 CFU/g (표시량: 3.4 × 109 CFU/g), 5.35, 1.29%이었으며, 가공식품 중 유산균 함유량 표시 식품 17건의 유산균수 평균은 5.8 × 108 CFU/g이었다. 프로바이오틱스 5제품의 보존온도(−20℃, 4℃, 20℃, 40℃)와 보존기간(1, 3, 6개월) 경과에 따른 프로바이오틱스 함량 변화를 관찰한 결과, 보존기간 1개월에서 6개월 후 프로바이오틱스수 감소율은 평균 59%이었고, 4℃에서 가장 낮은 감소율과 40℃에서 가장 높은 감소율을 나타내었다. 또한, 5개 제품 중 3제품에서 보존기간 1개월에서 3개월 경과 후 40℃에서 70%이상 급격한 균수 감소를 관찰할 수 있었다. 따라서 프로바이오틱스 제품의 보존온도와 보관기간에 따른 변화를 고려할 때 프로바이오틱스 제품은 냉장보관을 권장하며 구입 후 되도록 단기간에 섭취하는 것이 바람직한 것으로 판단된다.

사단법인 한국종균생산협회는 1974.7.6.에 설립되어 현재 23개 회원사로 구성되어 있으며, 충북 음성군 생극면에 소재하고 있다. 현재 제 24대 조영주 회장을 비롯하여 임원 12명을 중심으로 버섯류의 종균배양업에 종사 하는 종묘업자의 상호친목과 공동이익 증진 및 건전한 발전을 위해 활동하고 있으며, 특히 버섯 종균관리 및 지원제도 개선, 수입버섯 종균 제도 개선, 산림버섯종자관련 지원제도 및 개선, 각종 자료출판과 회보 발행, 교육 및 연구발표, 각종 버섯 국산 품종 보급률 통계조사 및 설문조사 등에 대해 적극적으로 대응하고 있다.

본 연구는 식품산업에서 큰 비중을 차지하고 있는 음료류에 대한 인공감미료 (삭카린나트륨, 아스파탐, 아세설팜 칼륨, 수크랄로스, 싸이클라메이트)의 함유현황 파악을 위한 동시분석법을 확립하였다. 희석 및 여과의 간편하고 효율적인 전처리 후 HPLC/MS/MS를 이용하여 5종 인공감 미료 동시분석 조건을 검토하였다. 컬럼은 C18(2.1 mm × 150 mm, 3.5 um), 이동상은 2% methanol (1 mM ammonium acetate)과 95% methanol (1 mM ammonium acetate)을 사용하여 농도구배 조건으로 각 성분을 분리하였으며 ESI/ SRM 방식으로 정량 분석하였다. 0.1~5.0 mg/L의 농도범 위에서 각 인공감미료 검량선은 1에 가까운 높은 직선성을 나타냈다. 검출한계, 정량한계는 각각 0.001~0.022 mg/ L, 0.004~0.073 mg/L로 저농도의 감미료 분석이 가능함을 확인하였다. 회수율은 92.76~113.50%, 정밀도는 10.91% 이하로 양호하였다. 이상의 결과로 본 분석법은 음료 중 인공감미료 분석에 적합하다고 판단되었다. 확립된 분석법으로 시중 유통 중인 음료 102건 분석한 결과 42건에 서 아스파탐, 아세설팜칼륨, 수크랄로스가 검출되었으며 삭카린나트륨과 싸이클라메이트는 검출되지 않았다. 검출된 인공감미료는 표시사항과 일치하였으며 사용대상과 사용량의 기준에 적합하였다.

This study was performed to survey and evaluate the contents of caffeine in commercial palatability foods by HPLC. The contents of caffeine in commercial palatability foods were 9.0-49.2 mg in black tea, 35.9-141.4 mg in coffee, 12.4-48.0 mg in green tea, 7.1-16.5 mg in brown rice green tea, 22.8 mg in cocoa tea, 10.3-25.0 mg in cola and 10.0-48.2 mg in ice bar(coffee) respectively. The contents of caffeine extracted from black tea, coffee(roasted beans) and green tea were rapidly increased for five minutes from the extraction initiation, and were not nearly changed after ten minutes. Moreover, the caffeine contents were increased until 100℃ of extraction temperature.

본 연구에서는 트러스 구조물의 이산최적설계를 위해 유전알고리즘(GA)을 적용하였다. 확률론적인 절차를 통해 설계에 필요한 초기 집단을 생성시킨 후, 설계를 개선시키기 위해서 자연선택 및 적자생존의 원리를 적용하였다. 다하중조건 하에서 트러스 구조물의 중량 최소화를 위해 응력 및 변위 제약을 고려하였다. 먼저, 이미 잘 알려진 트러스 구조물에 대해서 GA를 이용하여 얻은 최적해와 기존 문헌들에서 제시하고 있는 값들을 비교함으로써 GA의 신뢰성 및 적용성을 검증하였고, 이러한 신뢰성 검증을 바탕으로 사용성 있는 트러스 구조물의 이산최적설계를 위해 현재 생산중인 강재제원표로부터 부재가 선택되도록 하였다. 강재의 단면으로는 L형강을 사용하였으며, L형강의 강종은 9개의 강종들 (SS 400, SWS 400, SMA 41, SWS 490Y, SWS 520, SMA 50, SWS 570, SMA 58) 중에서 설계자에 의해 자유롭게 선택되도록 하였다.

This study was carried out to propose a simple method for the extraction of seven tar dyes such as tartrazine, sunset yellow FCF, amaranth, erythrosine, allura red, brilliant blue FCF and indigo carmine using aminopropyl amine cartridge and to determine the content of the dyes in candies, soft drinks, ice bars and okchuns produced in Korea. The tar dyes were simultaneously analyzed by reverse phase high performance liquid chromatography(HPLC). The recovery rates of the dyes ranged from 65.8% to 99.6%. The contents of the dyes in candies, soft drinks, ice bars and octhuns were N.D.-50.1 mg/kg, N.D.-49.9 mg/kg, N.D.-56.0 mg/kg and N.D.-867.3 mg/kg, respectively. The types of the dyes used most frequently for candies, soft drinks and ice bars were tartrazine, brilliant blue and amaranth, respectively. Of the samples, tartrazine was used frequently, and indigo carmine was not used at all.

Purpose - In the development of new products, suppliers involvement and developing products jointly can be said to be strategic activities that utilize the lack of knowledge from external organizations. In this new product development, supplier involvement has been proven to have a positive impact on new product development performance for a long time by previous research. However, sufficient academic research has not been conducted on the influence of supplier involvement in various product strategies or sales strategies that buyers make in order to secure a competitive advantage in the market. This study argues that product strategy and sales strategy used by buyers in the development of new products will control the effect of supplier involvement on new product development performance in order to compensate the lack of these academic aspects. Research design, data, and methodology – Specifically, we selected the modularization strategy of the product as the product strategy, which is considered as an important strategy in the new product development through the preceding research, and the mass customer satisfaction strategy was chosen as the sales strategy. In order to achieve these research objectives, regression analysis was conducted using data from manufacturing productivity panel collected jointly by the Ministry of Industry, Trade and Industry and the Korea Productivity Center. Results - As a result, supplier involvement and new product development performances (development cost efficiency, customer satisfaction) were positively related. The product modularity strategy proved to have an interactive effect on the relationship between supplier involvement and new product development performances (development cost efficiency, customer satisfaction). However, it has not been confirmed that there is a statistically significant interaction effect between supplier involvement and new product development performances. Conclusions - Supplier involvement has positive relationships with NPD performance. In addition, product modularity strategies have interaction effects with supplier involvement and affect new product development performance (development cost efficiency and customer satisfaction). The results of this study are of academic significance in the case of lack of empirical studies on the effect of supplier participation on the effect of buyer 's strategy when a supplier participates and develops new products jointly.

Purpose - To meet the needs of various customers in an uncertain market environment, many companies use product modularization strategies. Modularization of a product means that one product consists of several components and that the type of product can be changed according to the combination of components. The greatest feature of modularity is that changes in one component do not significantly affect the physical changes in the other component to which they are connected. Modularization of products is recognized as a very important strategy to reflect increasingly complicated customer requirements to products and respond to the needs of various markets. Many studies have been made in connection with the concept of mass customer satisfaction. There are many prior studies that modularization of such products positively affects the operational performance (manufacturing cost, fast delivery, etc.) and innovation of the product. However, excessive modularization has been found to have a negative effect on this performance. However, there are very few studies on the nonlinear relationship between product modularization and customer satisfaction. Supplementing these academically insufficient parts is very necessary when considering the current market environment. Research design, data, and methodology - In order to make up for the shortcomings of academic research in Korea, this study collects data through questionnaires in electronic, auto, and defense industry. This is because these industries are using modularity of products. based on lots of previous studies and information overload theory, we made two hypothesis and verify with empirical analysis. All 108 data were used. We used the R program and SPSS program for statistical verification. Results - As a result of the study, modularization of products showed positive relationship with customer satisfaction to a certain level. However, it has been found that when the modularization is over and beyond a certain level, there is a negative relationship with customer satisfaction. Conclusions – Excessive modularization of products can have a negative impact on customer satisfaction. This result can be understood as a result of human limited rationality due to information overload. Therefore, it is important for companies to apply appropriate modularity to product design.