간행물
한국공간구조학회지 KCI 등재 JOURNAL OF THE KOREAN ASSOCIATION FOR AND SPATIAL STRUCTURES
- 발행기관 한국공간구조학회
- 자료유형 학술지
- 간기 계간
- ISSN 1598-4095 (Print)2287-7401 (Online)
- 수록기간 2001 ~ 2024
- 주제분류 공학 > 건축공학 공학 분류의 다른 간행물
- 십진분류KDC 540DDC 690
권호리스트/논문검색
제2권 제3호 (2002년 9월) 6건
1.
2002.09
구독 인증기관 무료, 개인회원 유료
The objective of this study is the development of a size and shape discrete optimum design algorithms, which is based on the genetic algorithms and the fuzzy theory. This algorithms can perform both size and shape optimum designs of plane and space trusses. The developed fuzzy shape-GAs (FS-GAs) was implemented in a computer program. For the optimum design, the objective function is the weight of structures and the constraints are limits on loads and serviceability. This study solves the problem by introducing the FS-GAs operators into the genetic.
4,000원
2.
2002.09
구독 인증기관 무료, 개인회원 유료
The purpose of this paper is to study the buckling characteristics of elliptical latticed domes under conservative loading conditions. The latticed domes are usually designed in geometrically spherical shape. For this type of latticed domes, many researchers have researched and even the simplified estimation codes for the buckling load level have been available. However, geometrically elliptical latticed domes have been often constructed, and show different buckling characteristics following with geometrical parameters as rise-to-span ratio and so on. Therefore, it is necessary to investigate the general tendency of buckling characteristics of the elliptical latticed domes. In this paper, to find out some buckling characteristics of elliptical latticed domes, height, boundary configuration and gap are used as the shape coefficients. For each model with different parameters, the eigen values and the buckling loads are evaluated.
4,000원
3.
2002.09
구독 인증기관 무료, 개인회원 유료
The Objetive of this paper is to help to make decision of the appropriate structural types in long span strudured building due to range of span. For the intention, based on 7 forces of strudural element, it is analized the relationships among 6 configurations of strudural element(d/1), 25 structural types, 4 materials, and span~Iength known with 186 sample from 1850 to 1996
1) bending forces: club(1/100~1/10), plate(1/100~1/10), rahmen(steel, 1O~24m) simple beam(PC,1O~35m)
2) shearing forces: shell(1/100~1/1000) hyperbolic paraboloids(RC,25~97m)
3) shearing+bending forces: plate, folded plate(RC,21~59m)
4) compression axial forces: club, arch(RC, 32~65m)
5) compression+tension forces: shell, braced dome shell(RC, 40~201 m), vault shell(RC, 16~103m)
6) compression+tension axial forces: rod(1/1000~1/100), cable(below l/1000)+rod, cable+rod+membrane(below 1/1000), planar truss(steel, 31~134m), arch truss(31~ 135m), horizontal spaceframe(29~10 8m), portal frame (39~55m), domical space truss(44~222m), framed membrane(45~1 1Om), hybrid membrane (42~256m)
7) tension forces: cable, membrane, suspension(60~150m), cable beam(40~130m), tensile membrane(42~136m), cable -stayed(25~90m), suspension membrane(24~97m), single layer pneumatic structure(45~231m), double layer pneumatic strudures(30~44m)
4,300원
4.
2002.09
구독 인증기관 무료, 개인회원 유료
The objective of this study is the development of size, shape and topology discrete optimum design algorithm which is based on the genetic algorithms. The algorithm can perform both shape and topology optimum designs of trusses. The developed algorithm was implemented in a computer program. For the optimum design, the objective function is the weight of trusses and the constraints are stress and displacement. The basic search method for the optimum design is the genetic algorithms. The algorithm is known to be very efficient for the discrete optimization. The genetic algorithm consists of genetic process and evolutionary process. The genetic process selects the next design points based on the survivability of the current design points. The evolutionary process evaluates the survivability of the design points selected from the genetic process. The efficiency and validity of the developed size, shape and topology discrete optimum design algorithms were verified by applying the algorithm to optimum design examples
4,000원
5.
2002.09
구독 인증기관 무료, 개인회원 유료
This thesis investigates vibration response characteristics of building frames in which dampers are installed. The frames belong to passively vibration-controlled. Structures which utilizes energy dissipation of mechanical dampers provided in the structure. In this thesis, a turbulent flow damper sealed by visco-elastic material was dealt with as the device of passive vibration control. To investigate the resisting force characteristics of the damper, harmonic vibratration tests were carried out. Based on the test results, a theoretical model of the damper resistance was presented and a method of identifying the model parameters was proposed. Shaking table tests of the frame with and without the dampers were carried out and the effectiveness of the damper was examined. The response of the frame with the dampers was reduced to 1/2 or 1/3 of the cases without the damper.
4,200원
6.
2002.09
구독 인증기관 무료, 개인회원 유료
It is often hard to obtain analytical solutions of boundary value problems of shells. Introducing some approximations into the governing equations may allow us to get analytical solutions of boundary value problems. Instead of an analytical procedure, we can apply a numerical method to the governing equations. Since the governing equations of shells of revolution under symmetric load are expressed by ordinary differential equations, a numerical solution of ordinary differential equations is applicable to solve the equations. In this paper, the governing equations of orthotropic spherical shells under symmetric load are derived from the classical theory based on differential geometry, and the analysis is numerically carried out by computer program of Runge-Kutta methods. The numerical results are compared to the solutions of a commercial analysis program, SAP2000, and show good agreement.
4,000원
