Counter balance valve is used as one part of hydraulic motor brake system. The function of this valve is to protect over-run or free falling of inertia load. But occasionally the brake system with counter balance valve makes some undesirable problems such as pressure surges or vibrations. These problems may hurt system safety and driver's conformability. Nevertheless, studies on dynamic characteristics of hydraulic system including counter balance valve are very rare, so further accumulation of research results are required. In this study, for the purpose of easy estimation about dynamic characteristics of hydraulic system including counter balance valve, precise formulation describing fluid dynamics and valve dynamics under various boundary conditions were made. The equations obtained in the preceding process include some parameters that must be got experimentally. Flow coefficients of valve and choke are the most significant ones among the parameters. So these parameters are obtained experimentally in this study, and experimental equations obtained from the experimental data were used for numerical calculation. The equations were analysed by numerical integration using Runge-Kutta method, because the equations contain various nonlinear terms. From the numerical analysis, it was verified that the dynamic response of counter balance valve and pressure variation at each elements can be estimated very easily. So the analysing method developed in this study enabled very easy estimating the relation between the performances of counter balance valve and various physical parameters related to the valve. Conclusively, it is said that the results obtained in this study can be used very usefully to develop a new type counter balance valve or to apply the valve to actual hydraulic system for various industrial equipments.

A cartridge type hydraulic logic valve consists of simple two port valve whose poppet is closed or opened by means of pressure signal of a pilot line. Accordingly, the logic valve can be used not only for direction, flow and pressure control purpose but also for versatile function valve which enables all above mentioned functions. In addition, the valve has little internal leakage and pressure loss, superior response characteristics and easiness in making small block type valve. The above mentioned good performances being recognized recently, the logic valve has been used widely in the large scale hydraulic system such as a hydraulic press system, for the performance requirements of high speed operation and precise control characteristics. However, there are scarce reports until now, except for a few ones from Aachen Institute of Technology in West Germany, so it is necessary to be studied on development and investigation for practical application. This paper showed that the static and dynamic characteristics of a logic valve when the logic valve is used for directional control, to investigate the relations between the valve operating characteristics and the valve design conditions. From the above mentioned procedure, it was ascertained that the valve operation characteristics obtained by numerical analysis showed good agreements with experimental results. The representative results obtained are as follows; 1. During the valve is closing, the poppet velocity is almost constant in the logic valve. 2. The pilot pressure P sub(3) and the resistance R in the pilot line have much influences on the valve operation time. 3. Spring strength have not such a severe influence on the valve operating time. 4. The operation characteristics of the logic valve can be estimated with good accuracy comparatively by numerical analysis with the equations describing poppet motion.

원전기기의 지진 안전성 평가를 위해서는 설치된 위치에서 발생가능한 지진하중을 고려하여 내진해석을 수행한다. 내진해석을 수행하기 위해서는 대상기기의 실제거동을 반영하는 해석모델을 구축하는 하는 것이 중요하다. 원전의 내진검증 기술 기준인 IEEE 344에서는 기기의 동적 특성을 결정하는데 도움을 주기 위해서 탐색시험을 수행할 것을 권고한다. 탐색시험의 종류는 기저 가진에 의한 방법과 임피던스 방법에 의한 방법을 제시하였다 본 연구는 원전의 한 대상기기를 선정하고 기술 기준에서 제시하는 공진탐색시험을 수행하고 그 결과에 대해 분석하고 현장 적용성 방법에 대해 검토하였다.

이 연구에서는 풍력-태양광 하이브리드 가로등 구조물에 대한 동적 응답을 계측하여, 서로 다른 터빈을 적용하였을 때의 진동 특성 및 공진현상을 비교하였다. 2엽 및 3엽 풍력터빈을 적용하였으며, 하이브리드 가로등이 가지고 있는 진동 특성은 가동 중인 조건에서의 동특성과 가진력을 비교하여 분석하였다. 최근 제안된 방법을 통해 가속도 계측자료를 이용하여 변위 응답을 추정하였고, 2엽 풍력터빈을 적용한 경우 동적 변위 응답의 진폭은 공진 하의 조건에서 4~6cm 범위에 있고, 3엽 풍력터빈을 적용한 경우에는 공진이 발생하지 않아 변위는 2mm 이내로 제한됨을 알 수 있었다.

The purpose of this study is to get a more precise frequency of hollow core slabs by comparing the observed values from the actual free vibration tests and the predicted values based on the analysis model. The actual free vibration tests were carried out in the construction field using Ω shaped hollow core slabs. Modal analysis is conducted based on the analysis model that takes into account the differences in section properties due to void parts of slab. The differences between the predicted values based on the modal analysis with analysis model and the measured data from the actual tests range from 2~7%. This study demonstrates that the analysis model that incorporates void parts of slab could be used in evaluating serviceability of hollow core slabs with reasonable accuracies.

This study is a result of the dynamic characteristics of the tall building using real time structural health monitoring system. The monitoring system consist of an anemometer, accelerometers, GPS and internet-based data logging system. Through this realtime ambient measurement data, evaluate the serviceability of the building.

As the results of study, the difference of marshall stability is insignificant according to steel mesh reinforcement. But property of dynamic stability of steel mesh reinforced asphalt concrete is improved 2.6 times compared to the Plain.

In this paper, we propose an image-based measurement method of structure dynamic characteristics to assess the damage of structure in a more cost-effective way than traditional structure health monitoring system.

In this paper, four damage detection techniques based on dynamic characteristics were utilized and compared to identify damage in a Steel Catenary Riser(SCR). Twelve damage scenarios were simulated by using a numerical model of SCR. The performance on damage detection for each technique was showed and the applicability was discussed.

It is possible for stress to concentrate due to interaction between shear wall and outer frame. In this study, proposed dual system installed the damper between shear wall and outer frame, and evaluated the seismic performance of the dual system through shaking table tests.

Recently, it is more concerned about securing of its seismic safety, as underground structures are significantly recognized. Especially, it is very important that underground structures such as the tunnel of urban railroad or subway ensure the seismic safety of its, because it can be caused an enormous loss of lives and a economical damage by earthquake. When the subway tunnel of cut-and-cover box type is constructed, grounds are excavated and refilled. In this study, the parametric study is performed and analyzed about factors affecting seismic analysis of cut-and-cover tunnel, such as soil type, refilled range, tunnel location, etc. Consequently, it is hoped to provide the preliminary data for a better reasonable review on seismic design and seismic performance assessment of underground structures.

To monitor dynamic responses of bridges, the vision-based system using commercial video-related equipment is developed. The research and development has been performed for dynamic characteristics extraction of external tendons in PSC box girder bridges. The vision-based dynamic measurement system consists of an industrial camera and notebook computer that can measure tendon's vibrations with 100 fps. The vision-based system was successfully tested and verified in the testbed bridge.

본 연구에서는 준능동 진동 제어를 위한 MR 감쇠기의 동적 모델링을 통한 특성을 분석 및 평가하였다. 실제 구조물 크기의 모형구조물을 진동제어하기 위하여 Semi-active 성능의 MR Damper를 설계/제작 하였다. 일반적으로 MR Damper를 이용한 준능동 제어 시스템을 구축하기 위해서는 감쇠장치의 발생 감쇠력 및 거동 성향 등의 데이터를 수치적으로 나타낼 수 있는 동적 모델이 요구된다. 따라서 본 연구에서는 MR Damper의 동적거동을 예측/평가 할 수 있는 모델링을 하기 위하여 다양한 동적 모델 중Power 모델 및 Bingham 모델을 적용하였다. 이때 동적 모델과 비교/평가하기 위하여 개발된 MR Damper의 동하중 실험을 수행하였다. 동하중 실험조건은 가진 주파수를(0.15Hz, 1.0Hz, 2.0Hz) 선정하고, 주파수별 각각 3가지씩 가진 속도를 달리하여, 변위가 감쇠력에 미치는 영향력을 확인하였다. 이렇게 얻어진 MR Damper의 동하중실험 결과를 적용하여 각 동적 모델 별 모델변수를 규명하였고, 이를 바탕으로 힘-속도 관계곡선 및 예측된 발생 감쇠력을 산출하였으며, 산출된 결과와 개발된 MR Damper의 실험 결과를 상호 비교⋅평가하였다. 최종적으로 본 연구에서 개발한 MR Damper는 준능동 제어장치로 활용 가능함을 확인 하였고, 다양한 변위를 이용한 실험을 통하여 정상적인 진동제어를 위해서는 최소 2mm 이상의 변위가 확보되어야 한다는 결과를 얻었다.

The main purpose of this study is to evaluate the seismic capacity of R/C building having masonry spandrel-walls. The pseudo dynamic test was applied in order to investigate relationships of the short column effect between a pure R/C frame and a R/C frame having masonry spandrel-walls. At the same time, the non-linear dynamic analysis was carried out and compared test results.

This study is a result of the dynamic characteristics of tall building located in Haewoondae. In order to analyze the natural frequency and damping ratio of the building, acceleration is measured through wind monitoring system during 6 months.

Long span arch structure is composed of arch as relatively flexible structure and column as relatively rigid structure. In this study, the characteristic of dynamic response is analyzed according to the dynamic characteristics between arch and columns. The result of analysis for arch as relatively vertical vibration mode is dominant, the influence of columns mainly appears at relatively high frequency band according to increase of 1st mode frequency in column.

In this study is experiment result of steel fiber reinforced concrete panel with damage characteristics. To assess the damage characteristics of SFRC panel, aggregate size and steel fiber was used as a variables. The experimental results show that steel fiber reinforced concrete panel is superior compared to normal reinforced concrete panel on area loss rate and weight loss rate. The experimental results of concrete panel with aggregate size 8mm is superior than 20mm.

Vibration measurements were conducted before and after the experiment of static loading test for soil-wall in wooden structures. As a result, natural period was changed depending on the damage of soil-wall. Accordingly, the damage assessment was carried out using each specimen strength degradation and the dynamic characteristics.

This study analyzes descriptive statistics and tests homogeneity hypothesis, and applies a posteriori comparison procedures among treatment levels for the response characteristics such as static response ratios, impact factors, natural frequencies of bridges according to structural types and service periods. This study is expected to help understand the difference among response characteristics of groups and provides the practical information for safety assessment and structural design.

건설환경의 지속적인 변화로 인하여 교량 건설비용의 최소화뿐만 아니라 공용기간중의 유지관리를 포함한 전체 비용의 최소화 및 최적화의 요구가 증가하고 있다. 이러한 이유로 교량의 상부구조에서 하부구조로 힘을 전달하기 위해 사용되는 교량받침 대신에 스터드나 연결철근 등과 같은 연결재를 사용하여 교량의 상부구조와 하부구조를 라멘식으로 일체화 시킨 교량형식이 제시되고 있다. 이 논문은 교량의 상부구조 형식을 연속 UD PSC 거더로 하여 철근콘크리트 교각과 일체화 시킨 교각일체형 연속 UD PSC 거더교를 대상으로 한다. 교각일체형 연속 UD PSC 거더교는 라멘교 형식과 거더교 형식을 결합한 교량으로 일반 받침형식의 교량과 상이한 거동특성을 나타낸다. 하지만 거동 특성에 대해 명확히 규명되어 있지 않다. 따라서 본 논문에서는 해석적 방법을 이용하여 교각일체형 연속 UD PSC 거더교의 동적거동 특성을 분석하고 2, 3경간 교각일체형 연속 UD PSC 거더교에 적용할 수 있는 충격계수 산정식을 제시하였다.