The International Atomic Energy Agency recommends the deep geological disposal system as one of the disposal methods for high-level radioactive waste (HLW), such as spent nuclear fuel. The deep geological disposal system disposes of HLW in a deep and stable geological formation to isolate the HLW from the human biosphere and restrict the inflow of radionuclides into the ecosystem. It mainly consists of an engineered barrier and a natural barrier. Safety evaluation using a numerical model has been performed primarily to evaluate the buffer’s long-term stability. However, although the gas generation rate input for long-term stability evaluation is the critical factor that has the most significant influence on the long-term hydraulic-mechanical behavior of the buffer, in-depth research and experimental data are lacking. In this study, the gas generation rate on the interface between the disposal canister and the buffer material, a component of the engineered barrier, was mainly studied. Gas can be generated between the disposal canister and the buffer material due to various causes such as anaerobic corrosion of the disposal canister metal, organic matter decomposition, radiation decomposition, and steam generation due to high temperature. The generation of gas in such a disposal environment increases the pore gas pressure in the buffer and causes internal cracks. The occurred cracks increase the intrinsic permeability of the buffer, which leads to a decrease in the primary performance of the buffer. For this reason, it is essential to apply the appropriate gas generation rate according to the disposal condition and buffer material for accurate long-term stability analysis. Therefore, the theoretical models regarding the estimation of gas generation were summarized through a literature study. The amount of gas generated was estimated according to the disposal environment and material of the disposal canister. It is expected that estimated values might be used to estimate the long-term stability analysis of buffer performance according to the disposal condition.

Barrier effect model developed by CRIEPI is used for the estimation of rate of radioactive material release from a transport cask submerged in the ocean. If the containment boundary of cask is broken in an accident during maritime transportation, the sea water comes into the cask cavity and the leaching of radioactive material occurs. If the release of radioactive material thorough the opening of the containment boundary of cask is less than the leaching rate of the radioactive material inside the cask, then the release rate is controlled by the saturation limit of the sea water inside the cask cavity. In this study, the release rate estimation using the barrier effect model is compared with the model used in other codes, such as MARINRAD. And by parameter study, important factors that affect the releaser rate are identified and prioritized. It is shown that the gap generated in the containment boundary is the key parameter that determine the release rate of the radioactive material and the leaching rate is the dominant parameter to determine the saturation time of the cavity sea water.

Laboratory testing to simulate the drying of spent fuel is most often done using a cooling rate of approximately 5°C per hour because there are so many restricted test conditions like R&D project duration limit, budget and temporary electronic supply blackout at laboratory building. However, in a real dry cask storage system, the fuel cools much slower. Early data from KAERI on unirradiated, pre-hydrided cladding has shown that slower cooling may result in more brittle behavior than is currently observed based on these short-term tests. Given the potential safety and future handling implications of failed fuel, it is important to determine if the material properties of spent fuel cladding measured in these laboratory tests are the same as would be observed on fuel that has undergone a much longer, slower cooling, which may provide more time for hydrides to precipitate in the radial direction. KAERI and PNNL have started a collaborative I-NERI R&D project on this topic and each organization will perform tests on unirradiated & irradiated cladding under various hoop stress and cooling rate combinations. Scope of collaborative work is to evaluate long-term cooling (slow cooling rate) on hydride reorientation and subsequent material properties of cladding to determine if past and current research activities on spent nuclear fuel are bounding. The results will be used to direct future testing and help predict cladding performance over a wide range of burnups during extended storage and transportation.

Background: Forward head posture leads to resulting in posture instability and changes in spine alignment. To treat this condition, numerous studies have shown the effectiveness of joint mobilization. However, only a few studies have reported on the intervention location of joint mobilization or its effects on heart rate variability. Objectives: To investigated the effects of joint mobilization intervention at the lower cervical spine on pain, head posture, and heart rate variability (HRV) in patients with a forward head posture. Design: A randomized controlled trial. Methods: Twenty patients with forward head postures who met the study inclusion criteria were recruited. A randomization program was used to divide the subjects into experimental and control groups. Each group consisted of ten subjects. The intervention was performed for four weeks, three sessions per week, 15 min per day, and non-simultaneously throughout the 12-week study period. Results: A significant decrease in neck pain was shown in both the experimental and control groups. In contrast, significant changes in craniovertebral angle (CVA), cranial rotation angle (CRA), and HRV were found only in the experimental group. Conclusion: The mobilization of the cervical spine is an effective intervention for improving pain, head posture, and HRV.

In this study the effect of vitamin C administration on pregnancy rates during summer heat stress in dairy cows was examined. A total of 80 Holstein-Friesian cows were divided into control and treatment groups (n = 40 each). Control group animals were given 10 mL isotonic normal saline, and treatment group, Vitamin C (4 mg/kg) on artificial insemination day (day 0) and 4th, 8th and 12th day post insemination. Pregnancy diagnosis was performed on 30th day post insemination by ultrasonography. Blood samples were randomly taken from 11 animals from each group. Serum P4, GSH, MDA and plasma 8-OHdG levels were determined by using ELISA method. Results showed that 8-OHdG levels were lower in treatment group on day 4, 8 and 12 (p < 0.05) compared with the control group. Similarly, pregnancy rate was higher in treatment group (32.5%) than control (22.5%), respectively. However, MDA, P4 and GSH levels were similar in both groups at 4th, 8th and 12th day. A gradual increase in P4, and MDA levels, and a strong positive correlation between 0, 4th (r = 0.54), 4, 8th (r = 0.59) and 8, 12th (r = 0.51) day was found. Similarly, GSH levels also showed positive correlation at days 0, 4th (r = 0.47) and 4, 8th (r = 0.56). However, a strong negative correlation (r = -0.56) between MDA day 0, and GSH day 8 was found. In conclusion, vitamin C application during insemination period in postpartum cows increases pregnancy rate, and reduces oxidative stress metabolite 8-OHdG levels.

본 연구는 도로 노면결빙 판정 알고리즘에 대해 알고리즘을 개선하고 실제 현장 측정 자료와 알고리즘 예측값을 비교하였을 때 알고리즘에 대한 적중률을 분석하였다. 분석을 위하여 포천시 신북면 금 동리의 도로 및 기상을 측정하였다. 알고리즘은 기존 도로 결빙 알고리즘을 선정하여 실제 결빙 조건 및 측정 수치에 맞춰 4차 알고리즘까지 개선하였다. 최종적으로 응결에 의한 결빙, 강수에 의한 결빙, 적설에 의한 결빙, 결빙상태의 지속, 풍속에 의한 결빙 5개의 알고리즘을 제작하였다. 포천 현장에서 알고리즘을 활용하여 예측할 경우 경우 결빙 적중률이 93.22%까지 개선되었다. 결빙 알고리즘에 대한 조합 비율에 대 해 도출하였을 때 응결에 의한 결빙과 결빙상태의 지속에 대한 알고리즘이 96%를 차지하였다.

High concentrations of fine particles are increasingly being detected due to inflows from abroad and local emission sources in Korea. As most people spend about 90% of their time indoors, the use of indoor air cleaners has grown significantly as they are now thought to be essential items. In this study, the noise, power consumption, and clean air delivery rate (CADR) of commercial air cleaners were analyzed according to the structural shape of the air cleaners. Analyses were performed based on the experimental results of 249 cases for air cleaners certified by Korea Air Cleaning Association. The air cleaners with front inlet and upper outlet air flow direction, which currently account for the highest market share, were found to have the highest noise per CADR (dB(A)/(m3/min)). On the other hand, the air cleaners with the inlet and outlet air flow in the same horizontal direction were found to have lowest noise per CADR than other structures.

WDM(Wavelength Division Multiplexing) is called a wavelength division multiplexing optical transmission method and is a next-generation optical transmission technology. Case company F has recently developed and sold PLC(Planar Lightwave Circuit), a key element necessary for WDM system production. Although Chinese processing companies are being used as a global outsourcing strategy to increase price competitiveness by lowering manufacturing unit prices, the average defect rate of products manufactured by Chinese processing companies is more than 50%, causing many problems. However, Chinese processing companies are trying to avoid responsibility, saying that the cause of the defect is the defective PLC Wafer provided by Company F. Therefore, in this study, the responsibility of the PLC defect is clearly identified through estimating the defect rate of PLC using the sampling inspection method, and the improvement plan for each cause of the PLC defect for PLC yeild improvement is proposed. The result of this research will greatly contribute to eliminating the controversy over providing the cause of defects between global outsourcing companies and the head office. In addition, it is expected to form a partnership with Company F and a Chinese processing company, which will serve as a cornerstone for successful global outsourcing. In the future, it is necessary to increase the reliability of the PLC yield calculation by extracting more precisely the number of defects.

본 연구는 반밀폐형 토마토 재배 온실에서 광합성율 극대화를 위한 적정 탄산가스 시비 농도를 구명하고자 광합성 모델을 이용하여 잎의 최대 카복실화율(Vcmax), 최대 전자전달속도(Jmax), 열파괴, 잎 호흡 등을 계산하고 실제 측정값과 비교하였다. 다양한 광도(PAR 200μmol·m -2 ·s -1 to 1500μmol·m -2 ·s -1 )와 온도(20°C to 35°C) 조건에서 CO2 농도에 대한 A-Ci curve는 광합성 측정 기기를 사용하여 측정하였고, 모델링 방정식으로 아레니우스 함수값 (Arrhenius function), 순광합성율(net CO2 assimilation, An), 열파괴(thermal breakdown), Rd(주간의 잎호흡)를 계산 하였다. 엽온이 30°C 이상으로 상승하였을 때 Jmax, An 및 thermal breakdown 예측치가 모두 감소하였고, 예측 Jmax의 가장 최고점은 엽온 30°C였으며 그 이상의 온도에서는 감소하였다. 생장점 아래 5번째 잎의 광합성율은 PAR 200－ 400μmol·m -2 ·s -1 수준에서는 CO2 600ppm, PAR 600－800μmol·m -2 ·s -1 수준에서는 CO2 800ppm, PAR 1000μmol·m -2 ·s -1 수 준에서는 CO2 1000ppm, PAR 1200－1500μmol·m -2 ·s -1 수준에서는 CO2 1500ppm을 공급했을 때 포화점에 도달하였다. 앞으로 광합성 모델식을 활용하여 과채류 온실 재배 시 광합성을 높일 수 있는 탄산시비 농도를 추정할 수 있을 것으로 판단된다.

최근 지구온난화에 의한 이상기상으로 겨울철 한파와 봄철 저온에 의한 농작물 피해가 심각하게 발생하고 있다. 특히 과수의 개화기 저온피해는 꽃눈의 생육단계에 따라 차이가 있으며 발육이 진전될수록 내한성이 약해져 개화 직전부터 낙화 후 1주까지 한계온도가 다르게 발생한다. 따라서 개화기가 빠른 사과 ‘홍로’가 ‘후지’보다 피해가 심각한 것이 일반적이나 2020년 4월 저온피해는 개화기가 늦은 ‘후지’의 피해가 심하게 발생하여 그 원인을 분석하고자 본 연구를 수행하였다. 충북 보은군 사과나무 ‘후지’와 ‘홍로’를 동시에 재배하는 2농가를 대상으로 품종 간 피해율 실태조사를 실시하였다. 또한 정확한 품종 간 비교 분석을 위하여 생육단계가 동일한 시료를 선택하여 인위적으로 저온처리(－2.0℃, －4.0℃)를 하여 피해 정도를 조사하고, 원인 분석을 위해 조직 내 유리당과 호르몬 함량을 분석하였다. 실태조사 결과 2농가 모두 ‘후지’가 ‘홍로’보다 피해율이 높았으며, 특히 B농가(저지대, 평지) ‘후지’의 경우 피해율이 60.5%로 가장 높았다. 또한 동일한 생육 단계의 시료를 사용한 인위적 저온 처리 시험결과에서도 ‘후 지’와 ‘홍로’ 품종 간 피해율에 유의한 차이가 있었다. 유리당 함량은 저온 피해율이 낮았던 ‘홍로’가‘후지’보다 높았으며, 호르몬 분석 결과 정상 꽃눈보다 손상된 조직에서 ABA, IAA 와 SA 함량이 높게 나타났다. 따라서 본 연구 결과 조직내 유리당 함량이 높으면 저온 피해율이 낮은 것을 확인할 수 있었으며, 특히 저온 피해율은 sorbitol 함량과 부의 상관관계를 이루고 있다.

The optimal determination of seeding rate is critical to minimizing uncertainties about the large variations observed in forage quality and productivity when alfalfa is cultivated under different geographical areas and growing conditions. The objective of this investigation was to provide information about the proper seeding rate according to harvest timing for alfalfa cultivation in the Northern regions of Korea. Alfalfa was sown in September 2018 at a seeding rate of 20, 30 or 40 kg/ha and harvested four times in 2019: May 3, July 2, September 11, and October 13. Regardless of seeding rate, alfalfa plant height was longest at the third harvest (113 cm) and the shortest in the last annual harvest (43.8 cm). However, seeding rate had no effect on alfalfa plant height at any harvest. Forage relative feed value was increased in the first cutting but decreased in the third cuttings as seeding rate increased. However, seeding rate had slight effect on alfalfa forage quality components at the second and fourth cuttings. Total annual DM and crude protein production (in 4 harvests) was greater at higher seeding rates. Plots seeded at a rate of 40 kg/ha produced on average 1,257 and 2,620 kg/ha more forage (DM basis) than those seeded at a rate of 30 or 20 kg/ha, respectively. Forage DM production at the first, second, third, and fourth harvests accounted for 36.1, 24.0, 27.1, and 12.8 % of total annual DM production, respectively. Overall, small differences were seen when alfalfa seeding rate was different but maximum forage DM production (in four harvests) was detected when seeding rate was 40 kg/ha. These data could be useful to the alfalfa growers by allowing them to make more accurate trade-offs between seed price and the expected magnitude of forage yield gains in order to select the best seeding rate.

어류 치어기의 주요 먹이로 생물로 사용되는 해산 로티퍼 (Brachionus plicatilis)의 생존율 및 개체군 성장률을 이용하여, 국내 연안에 잔류하고 있는 것으로 알려진 신방 오물질인 chlorothalonil의 독성을 평가하고자 하였다. B. plicatilis의 생존율은 0.039 mg L-1에서 유의하게 감소하기 시작하여, chlorothalonil의 농도가 증가할수록 감소하는 농도의존성을 나타냈다. 생존율의 무영향농도는 0.020 mg L-1, 최소영향농도는 0.039 mg L-1, 반수영향농도는 0.057 mg L-1로 나타났다. 개체군 성장률 또한 생존율과 마찬가지로 0.313 mg L-1에서부터 농도의존적으로 감소하는 경향을 나타냈다. 개체군 성장률의 무영향농도는 0.156 mg L-1, 최소영향농도는 0.313 mg L-1, 반수영향농도는 0.506 mg L-1 로 나타났다. 본 연구 결과, 해양 생태계 내에서 신방오물질인 chlorothalonil의 잔류 농도가 0.039 mg L-1 이상일 경우 B. plicatilis에게 독성영향을 줄 것으로 예상되며, 본 연구의 생태독성 시험결과를 바탕으로 해양환경 내 chlorothalonil 의 독성을 평가하기 위한 기초연구자료 및 다른 방오물질과의 독성영향을 비교평가할 수 있는 자료로 활용될 수 있을 것이다.

공주지역에 조림된 리기다소나무 군락에서 국내 대표 수종인 소나무와 방풍림으로 주로 조림되는 곰솔 낙엽의 분해율 및 분해과정에 따른 영양염류의 함량 변화를 파악하였다. 분해 60개월 경과 후 소나무 낙엽과 곰솔 낙엽의 잔존율은 각각 42.12±5.30과 24.79±1.98%로 소나무와 곰솔의 낙엽 분해율은 곰솔 낙엽의 분해가 소나무 낙엽의 분해에 비해 빠르게 일어났다. 60개월 경과 후 소나무 낙엽과 곰솔 낙엽의 분해상수 (k)는 각각 3.02과 3.59로 곰솔 낙엽의 분해상수가 다소 높게 나타났다. 소나무 낙엽의 분해과정에 따른 C/N, C/P 비율은 초기에 각각 14.4, 144.1 이었으나 60개월 경과 후에는 각각 2.26와 40.1로 점차 감소하였으며, 곰솔 낙엽의 경우 초기 C/N, C/P 비율은 각각 14.4와 111.3로 나타났고, 60개월 경과 후에는 각각 3.06와 45.8로 나타났다. 낙엽의 초기 N, P, K, Ca, Mg 함량은 소나무 낙엽에서 각각 3.07, 0.31, 1.51, 16.56, 2.03 mg g-1, 곰솔 낙엽에서 각각 3.02, 0.39, 0.99, 19.55, 1.48 mg g-1로 소나무 낙엽과 곰솔 낙엽의 질소와 인의 함량은 유사하였다. 60 개월 경과 후 N, P, K, Ca, Mg의 잔존율은 소나무 낙엽에서 각각 231.08, 130.13, 35.68, 48.58, 36.03%이었고, 곰솔 낙엽에서 각각 143.91, 74.02, 28.59, 45.08, 44.99%로 나타났다.

Chitosan, natural organic polymer, has been applied in water treatment as adsorbent due to non-toxic for human being. The amino group as functional group, can interacts with cation and anion at the same time. The prepared chitosan bead (HCB) was crosslinked to increase chemical stability (HCB-G) and both HCB and HCB-G were prepared to increase physical strength by drying referred to DCB and DCB-G, respectively. The adsorption effect for crosslinking and drying for four types of chitosan bead was tested using pseudo fist order (PFO), pseudo second order (PSO), and intraparticle diffusion model (ID). Regardless of PFO and PSO, the order of K, rate constant, is as followed: HCB > HCB-G > DCB > DCB-G for Cu(II) and phosphate. Drying leading to contraction of bead significantly reduced adsorption rate due to reduce the porosity of chitosan. In addition, crosslingking also negatively effect on adsorption rate. When compared with Cu(II) using hydrogel bead, phosphate showed higher value than Cu(II) for PFO and PSO. The application of ID showed that both hydrogel beads (HCB and HCB-G) obtained a very low R2 ranging to 0.37 to 0.81, while R2 can be obtained to over 0.9 for DCB and DCB-G, indicting ID is appropriate for low adsorption rate.

In the present study, we examined if deep uterine artificial insemination (DUAI) can improve the pregnancy rate of artificial insemination (AI) using epididymal spermatozoa (ES) in Hanwoo cattle. The estrus cycles of 88 Hanwoo cows were synchronized, and 17 cows were artificially inseminated using the DUAI method with ES, 20 cows were artificially inseminated via the uterine body (BUAI) method with ES, and as a control, 51 cows were inseminated by using the BUAI method with ejaculated spermatozoa from 1 proven bull after frozen thawing. The pregnancy rate of the DUAI method (58.8%) was higher than that of the BUAI method (25.0%, p = 0.0498). The motility of ES was examined immediately after thawing and after 3 and 6 h of incubation. The rapid progressive sperm motility of the control group was significantly higher than that of the ES group immediately after thawing and after 3 and 6 h of incubation (p < 0.05). The straight line velocity and average path velocity of the ES group after 6 h of incubation were significantly lower than those in the control group (p < 0.05). The linearity and amplitude of lateral head of ES were lower than those at 6 h (p < 0.05). The flagellar beat cross frequency and hyperactivation of ES were lower than the control spermatozoa immediately after thawing and at 3 h (p < 0.05). These motility parameters suggested that ES had a low motility and fertilization ability compared to the control spermatozoa. After frozen-thawing and 3 h of incubation, the percentage of live spermatozoa with intact acrosomes in the ES was significantly lower than that in ejaculated spermatozoa (p < 0.05). Our findings suggested that the DUAI method can overcome the low pregnancy rate of ES, despite the low motility, viability, and fertilization ability of ES.

The sampling bag is used as a storage container for odor gas samples. It is known that the substances recovery rate of odor bags decreases during storage time, and the degree of recovery varies depending on the characteristics of the gas sample and the material of the bag. This study investigated the recovery rate of VFA (ACA, PPA, BTA, VLA) in PEA bags during storage time. In addition, a model was developed to estimate the recovery rate of each substance as a function of time. Standard gas (ACA, PPA, BTA, VLA mixed) recovery rate was used for the model development. The concentration of the compound in the bag was measured by SIFT-MS at intervals of 1 to 2 hours. The recovery rate according to the storage time was calculated as the ratio to the initial concentration. The recovery rate of each substance according to the storage period (12h, 24h, 36h, 48h) was ACA (66.2%, 62.8%, 55.6%, 52.0%), PPA (77.6%, 72.1%, 63.0%, 58.1%, 86.6%), BTA (86.6%, 81.3%, 71.6%, 66.9%), VLA (94.8%, 89.0%, 76.6%, 71.7%). The recovery rate continued to decrease over the course of 48 hours of storage time. ACA, PPA, and BTA showed the greatest decrease within the initial 12 hours, which is form of exponential decrease. Therefore, we considered a 1~3 degree polynomial regression model and a 1~2 degree exponential decay model. Each developed model was evaluated by r², RMSE, MAPE, AIC, and then a model for each substance was selected. Selected models were tested with recovery rate data from swine farm odor samples. Only the ACA model exhibited a good performance (r² = 0.76).