검색결과

검색조건
좁혀보기
검색필터
결과 내 재검색

간행물

    분야

      발행연도

      -

        검색결과 1,780

        103.
        2022.08 KCI 등재 구독 인증기관 무료, 개인회원 유료
        스마트 항만시스템을 구축하기 위해서는 무엇보다 선박을 자동으로 계류시킬 수 있는 시스템이 요구된다. 항만의 자동계류시 스템의 허용 계류력을 산정하기 위해서는 선박의 특성을 고려하고, 해양환경적 외란으로 부터 발생된 외력을 정확히 계산해야 한다. 이러 한 환경적 외란의 크기를 정확히 추정하는 것은 자동계류장치 설계를 위해서 매우 중요한 요소이다. 본 연구에서는 항만 및 어항 설계기 준에 따라 한바다호에 대한 계류력을 추정하였다. 그 결과 한바다호에 작용하는 대부분의 외력은 바람으로부터 기인되는 것을 확인하였 다. 가장 극한 해양조건(B.F 6)에서 한바다호에 작용하는 종방향 힘은 18kN, 횡방향 힘은 248kN으로 나타났다.
        4,000원
        104.
        2022.08 KCI 등재 구독 인증기관 무료, 개인회원 유료
        In this study, we propose a flow velocity evaluation scheme based on pressure measurement in pressurized pipeline systems. Conservation of mass and momentum equations can be decomposed into mean and perturbation of pressure head and flowrate, which provide the pressure head and flowrate relationship between upstream and donwstream point in pressurized pipeline system. The inverse impedance formulations were derived to address measured pressure at downstream to evaluation of flow velocity or pressure at any point of system. The convolution of response function to pressure head in downstream valve provides the flow velocity response in any point of the simple pipeline system. Simulation comparison between traditional method of characteristics and the proposed method provide good agreements between two distinct approaches.
        4,000원
        105.
        2022.08 KCI 등재 구독 인증기관 무료, 개인회원 유료
        본 연구의 목적은 우리나라 Jersey 암소 56두로부터 조사된 체고 데이터에 대해 성장 모형을 추정하고, 추정된 체고 성장 모형의 모수를 활용하여 우리나라 Jersey 암소의 체고 성장 기초 자료를 제공하고자 실시하였다. 추정된 Gompertz, von Bertalanffy, Logistic 및 Brody 모형의 체고 성장 곡선 함수식은 각각      ,         ,          및       이었다. 추정된 Gompertz, von Bertalanffy 및 Logistic 모형의 모수를 이용하여 성장 특성을 분석한 결과 변곡점 월령이 각각 -0.3880, -5.235 및 -0.426월로 성장 기간 중 존재하지 않았다. Gompertz, von Bertalanffy, Logistic 및 Brody 모형에 대한 오차 평균 제곱합은 각각 14.189, 14.083, 14.730 및 14.011로 추정되었으며, 모형 결정 계수는 각각 0.971, 0.972, 0.970 및 0.972로 추정되었 다. 각 모형의 오차 평균 제곱합과 모형 결정 계수의 결과를 종합해보면 Brody 모형이 Jersey 암소의 체고 성장 곡선에 적합도가 좋은 것으로 판단된다.
        4,000원
        106.
        2022.08 KCI 등재 구독 인증기관 무료, 개인회원 유료
        This study aims to investigate and reveal the spatial structure of Boryeonghyeon by examining the geographical status of its Eupchi (Local administrative center:邑治) through an analysis of the location, tracing locations of governemnt offices including Dongheon(東軒) and Kaeksa(客舍) in the walled town, and checking the lot numbers of Sajikdan(社稷壇), Yeodan(厲壇), and Cheongyeonyeok(靑淵驛) outside it. Buildings of Boryeonghyeon in the walled town in the Joseon Dynasty were almost lost and now, part of the city wall and Haesanru(海山樓) just remains as relic. The walled town consisted of several buildings of government offices as well as Dongheon and Kaeksa which are government organs. Altar and shrine(壇廟) facilities including Shrine of Confucius(文廟), Altar of Land and Grain, and Preceptor's Shrine were placed outside the walled town and Cheongyeonyeok were operated as the facilities for transmission of royal orders. Therefore, the government office facilities in the walled town, altar and shrine facilities outside the fortress, and the location of the post station were required to trace and check each of them. For the checking method, the lot numbers could be checked by checking the original cadastral maps and the then land categories and owners, analyzing the records and circumstances of the relevant township annals(邑誌), and examining analyses on the locations by using a numerical map of one to 5 thousands. The study estimated the locations of government facilities including Dongheon and Kaesa placed in the walled town and was grasped to be the east and west gates with the south gate which remains now in the fortress. And the lot numbers of Sajikdan, Yeodan, Cheongyeonyeok.
        4,300원
        107.
        2022.06 KCI 등재 구독 인증기관 무료, 개인회원 유료
        Veronica L., the largest genus in the family Plantaginaceae, is widespread in various habitats. Due to their long-blooming flowers, Veronica species have high horticultural value as indoor potted, garden, and landscape plants. Furthermore, Veronica plants are extremely important owing to their notable diversity in habitat usage, ploidy level, and evolution. Several native taxa, which are of key interest in breeding programs and phylogenetic studies, have been identified in Korea. The genome sizes and chromosomal characteristics are basic cytogenetic features of all taxa, and their knowledge is a prerequisite when commencing genome sequencing projects. It can provide essential information for cytogenetic, taxonomic, phylogenetic, and evolutionary studies. Thus, cytogenetic analysis and genome size estimation of seven Veronica taxa native to Korea were conducted in this study. Fluorescence in situ hybridization (FISH) karyotype analysis and chromosome counting was conducted using metaphase chromosomes probed with 5S and 45S rDNA. Nuclear DNA content and genome size were determined using flow cytometry. FISH karyotype analysis revealed a common number of 5S loci and varying 45S signals that create distinctive rDNA distribution patterns in each taxon. The results indicated that the seven investigated Veronica taxa have calculated genome sizes (1C values) ranging from 517.1 to 862.0 Mbp. This study is the first to report the chromosome number and karyomorphology of seven Veronica taxa native to Korea, as well as the use of rDNA markers for identifying individual chromosomes. These findings contribute to the crucial understanding the genomic characteristics of species within the genus Veronica, serve as a basis for studying Veronica phylogeny and evolution, and provide valuable information for future breeding programs.
        4,300원
        108.
        2022.06 구독 인증기관 무료, 개인회원 유료
        To reduce the air pollution from maritime activities, which is proven to have severe impacts on the worldwide environment and human health, many international regulations have been established. Therefore, an effective political strategy and a complete inventory of emissions are needed to control atmospheric ship pollution and comply with these international standards. The purpose of this study is to calculate the amount of emission in three operating modes (cruising, maneuvering, and hoteling) for some main pollutants emitted from container ships and trucks operating in Daesan port in Korea based on bottom-up methodology. The results showed that the volume of air pollution of about 6,500 tons from container ships and 1,455 tons from container trucks were emitted in Daesan port area. Also, a total of 4 billion won (about 3.6 billion won from container ships, and about 400 million won from container trucks) was estimated.
        4,000원
        109.
        2022.06 KCI 등재 구독 인증기관 무료, 개인회원 유료
        Among migratory insect pests, Mythimna seperata and Cnaphalocrocis medinalis are invasive pests introduced into South Korea through westerlies from southern China. M. seperata and C. medinalis are insect pests that use rice as a host. They injure rice leaves and inhibit rice growth. To understand the distribution of M. seperata and C. medinalis, it is important to understand environmental factors such as temperature and humidity of their habitat. This study predicted current and future habitat suitability models for understanding the distribution of M. seperata and C. medinalis. Occurrence data, SSPs (Shared Socio-economic Pathways) scenario, and RCP (Representative Concentration Pathway) were applied to MaxEnt (Maximum Entropy), a machine learning model among SDM (Species Distribution Model). As a result, M. seperata and C. medinalis are aggregated on the west and south coasts where they have a host after migration from China. As a result of MaxEnt analysis, the contribution was high in the order of Land-cover data and DEM (Digital Elevation Model). In bioclimatic variables, BIO_4 (Temperature seasonality) was high in M. seperata and BIO_2 (Mean Diurnal Range) was found in C. medinalis. The habitat suitability model predicted that M. seperata and C. medinalis could inhabit most rice paddies.
        4,000원
        110.
        2022.06 KCI 등재 구독 인증기관 무료, 개인회원 유료
        농경지에서 작물이 필요로 하는 이상으로 양분이 과다하게 투입되는 경우 작물의 생육을 저해하거나 환경오염원으로 작용하게 된다. 우리나라 농경지 양분수지는 다른 OECD 국가에 비해 월등히 높은 수준이며, 과다양분 투입 때문에 수질과 대기 등 농업환경의 오염과 생물다양성 저하가 유발되고 있다. 환경부의 ‘양분관리제’ 도입, 농특위의 ‘토양 양분관리제 도입’ 의결과 같은 정부 정책은 이러한 과다양분 투입을 개선하기 위한 노력으로서, 이러한 정책을 뒷받침하고 환경적⋅사회경제적 성과를 도출하기 위해서 농업분야 양분수지 개선에 따른 공익적 기능의 발굴과 공익가치 의 평가가 필요하다. 본 연구의 목적은 메타분석 기법을 적용하여 선행연구에서 추출한 다양한 공익적 기능에 대한 가치평가 추정치를 이용하여 양분수지 개선의 공익가치를 간접적으로 추정하는 데 있다. 공익기능에 대한 연간 가구별 한계지불의사액을 추정한 결과, 수질개선은 약 60,315원/년, 기후조절은 139,740원/년, 토양보전 및 정화는 109,179원/년, 생물다양성은 150,213원/년으로 나타났다. 추정한 한계지불의사액과 산정된 기여율을 이용하여 공익가치를 추정하면 수질개선은 7,596억 원, 기후조절은 5,715억 원, 토양보전 및 정화는 3,380억 원, 생물다양성은 8,124억 원으로 추정된다. 이러한 결과는 향후 농업 환경보전 프로그램이나 정책을 추진하는 데 있어 객관적인 자료가 될 수 있을 것이다.
        4,000원
        111.
        2022.06 KCI 등재 구독 인증기관 무료, 개인회원 유료
        본 연구는 우리나라 Jersey 암소 41두로부터 측정된 체중 데이터를 이용해 Gompertz, von Bertalanffy 및 Logistic 모형의 성장 곡선을 추정하고, 추정된 성장 곡선의 모수를 활용하여 Jersey 암소의 성장 특성에 대해 알아보고자 실시하였다. 추정된 Gompertz, von Bertalanffy 및 Logistic 모형의 성장 곡선 함수식은 각각    ,         및          이었다. Gompertz, von Bertalanffy 및 Logistic 모형에 대해 변곡점은 각각 10.719, 8.4292 및 14.618 개월로 추정되었고, 변곡점 체중은 각각 208.514, 211.347 및 203.548kg으로 추정되었으며, 최대 증체율은 각각 20.851, 21.192 및 21.993 (kg/월)로 추정되었다. 오차 평균 제곱합과 모형 결정 계수의 결과를 종합해보면 von Bertalanffy, Gompertz 그리고 Logistic 모형 순으로 Jersey 암소 성장 곡선에 적합도가 높은 것으로 판단된다.
        4,000원
        112.
        2022.06 KCI 등재 구독 인증기관 무료, 개인회원 유료
        본 연구에서는 우리나라에 태풍이 내습할 때 먼저 피해를 받는 남해안 지역을 대표하는 Quantile을 제안하고, 각 지점들의 재 현기간에 따른 극치 풍속을 추정하기 위하여 연 최대풍속 자료와 Hosking이 제안한 선형-모멘트 방법(L-moments)을 이용한 지역빈도 해석을 수행하였다. 모든 기상관측 지점에서는 비정상적인 값이 존재하지 않았고 이질성 검정을 통해서 하나의 동질 한 지역을 나타 낼 수 있음을 확인하였다. 또한 적합도 과정을 통해서 Generalized Normal (GNO) 및 Generalized Extreme Value(GEV) 분포를 남해안 지역을 대표하는 빈도분포로 선택하였다. 상대 오차(RB)와 상대 평균제곱근 오차(RRMSE)를 이용하여 두 분포의 안정성을 평가한 결 과, GNO 분포가 GEV 분포보다 더 안정한 것을 알 수 있었다. 마지막으로 남해안 지역을 대표하는 Quantile과 각 지점들의 평균, 중앙 값, 그리고 위치 매개변수를 이용하여 지점들의 극치 풍속을 추정하였다. 본 연구에서 적용한 지역빈도해석이 자료가 부족하거나 계측 되지 않은 지점들에 대한 극치 풍속을 추정하기 위한 방법으로서 도입이 필요하다고 생각된다.
        4,000원
        116.
        2022.06 KCI 등재 구독 인증기관 무료, 개인회원 유료
        PURPOSES : The purpose of this study is to perform traffic flow characteristics analysis for each point of the long-term work zones and to propose an estimated capacity method to support the establishment of traffic flow management strategies for the long-term work zones. METHODS : The study explained the difference in traffic flow characteristics between the short-term and the long-term work zones, and estimated the capacity of the long-term work zones. The analysis data were collected from five points of long-term work zones of the twolane highway. And VDS and DSRC data were applied to validate data. RESULTS : The characteristics of traffic flow at each measurement point in the long-term work zones showed some differences, among which the capacity was estimated as the starting point to be 1,200 pcphpl and the ending point, 1,400 pcphpl. The delay length was estimated by applying the queuing theory based on the capacity of the start point where the bottleneck starts. As a result of verifying the congestion length based on space diagram map analysis, it was determined that the capacity calculation value and estimation methodology presented in this study were appropriate. CONCLUSIONS : The long-term work zones are mixed with different characteristics of roads, so as the capacity values depending on the analysis location. Therefore, it is necessary to select analysis points and methodologies for estimating capacity and delay depending on the purpose of the analysis, such as estimating the maximum queue length or analyzing the maximum travel time. Through this study, it is expected that by providing accurate information on congestion in advance, road users can detour to other roads, and construction officials can adjust the construction plan to minimize congestion in the construction section.
        4,200원
        117.
        2022.06 KCI 등재 구독 인증기관 무료, 개인회원 유료
        중국 동북부지역 랴오닝성의 단둥(40°07'N 124°23'E)과 지린성의 궁주링(43°30'N 124°49') 및 룽징(42°46'N 129°26'E)에서 2020년과 2021년 벼 재배기간 중에 성페로몬트랩으로 이화명나방(Chilo suppressalis)(나비목: 포충나방과)의 성충 발생 시기를 조사하였다. 1화기 성충은 5월 중순부터 7월 하순 사이, 2화기 성충은 7월 중순부터 9월 중순 사이에 발생하여 세 지역 모두 연중 2회 성충 발생양상이 뚜렷하게 확인되었 다. 위도가 높은 지역에서 발생시기가 더 늦었다. 각 지역에서 관찰된 1화기 발생 시기를 기준으로 발생 시기 모델링을 통해 2화기 발생 시기를 추 정하고 관찰된 시기와 비교하였다. 네 개의 선행연구 자료로부터 성충, 알, 유충, 용 발육단계의 온도의존 생명현상(발육속도, 발육완성분포, 생존 율, 성충 노화율, 총산란수, 산란완성분포, 성충 생존완성분포) 모델들을 수집하거나 작성하였고, 이들을 선행 연구에 따라 단독으로 사용하거나 혼합하여 곤충 발생 시기 추정 소프트웨어인 PopModel에서 결합하였다. 모델링 결과에서 유충 발육기간이 짧게 관찰된 선행연구 자료를 기반으 로 하여 구성된 모형들이 2화기 성충 발생 시기를 더 근접하게 추정하였다. 2021년에는 단둥과 룽징에서 성충 조사 시기에 맞추어 이화명나방에 의 한 벼 피해주율의 변화를 조사하였다. 피해주율은 벼 재배기간 중 누적되어 2번의 증가시기가 뚜렷하게 나타났고, 이화명나방의 각 세대 유충에 의 해 발생한 것으로 추정되었다.
        4,500원
        118.
        2022.05 KCI 등재 구독 인증기관 무료, 개인회원 유료
        Density and sound speed contrasts (g and h , respectively), and swimming angle were measured for sandfish (Arctoscopus japonicus) without swimbladder. The density contrast was measured by the volume displacement method while the sound speed contrast was measured by the acoustic measurements of travel time (time-of-flight method). The swimming angle was measured by dividing it into daytime, nighttime, daytime feeding and nighttime feeding. The g was 1.001 to 1.067 with an average (± standard deviation) of 1.032 (± 0.017), and the h was 1.007 to 1.022 with an average (± standard deviation) of 1.015 (± 0.003). The swimming angles (mean ± standard deviation) were 16.8 ± 10.3° during the daytime, 1.9 ± 12.3° during the nighttime, 30.2 ± 12.6° in the daytime feeding and 35.0 ± 13.2° in the nighttime feeding. These results will provide important parameters input to calculate theoretical scattering models for estimating the acoustic target strength of sandfish.
        4,000원
        119.
        2022.05 구독 인증기관·개인회원 무료
        A molten salt reactor (MSR) that uses molten salt mixtures as nuclear liquid fuel has recently received much attention due to its inherent safety. Various fluoride and chloride salt mixtures are considered as fluid fuel for MSRs. Among those, NaCl-MgCl2-UCl3 system is the one of the most promising candidates for molten salt fast reactor. The comprehensive information on thermo-physical properties such as density, viscosity, heat capacity and thermal conductivity are fundamental to MSR design development, but experimental data for NaCl-MgCl2-UCl3 system are unknown to the best of our knowledge. In this study, we estimated the thermophysical properties of NaCl-MgCl2-UCl3 system. The properties were calculated by mole fraction additive method using reliable experimental data from pure salt system. Other methods, such as rule of additivity of molar volume for density, modified Dulong-Petit method for heat capacity, and Rao-Turnbull prediction and Ignatieve-Khokolve correlation for thermal conductivity, have also been applied. Estimated values for the properties were compared with each other as well as available binary experimental data.
        120.
        2022.05 구독 인증기관·개인회원 무료
        Density of chloride molten salts is an essential physical property in the reactor core design and thermal-hydraulic design simulation, especially in molten salt reactor (MSR) design currently under development in Korea. NaCl-MgCl2-UCl3 pseudo-ternary system is one of the various candidate chloride-based salt mixtures because it has relatively-low melting point, very low vapor pressure, high thermal conductivity, etc. However, to the best of our knowledge, the density data of NaCl-MgCl2- UCl3 have not yet been measured or published worldwide, and therefore the ballpark figures of the density should be given for the preliminary reactor design. In our present study, the density estimation of NaCl-MgCl2-UCl3 based on the pseudo-binary data, i.e., NaCl-MgCl2, MgCl2-UCl3, and NaCl- UCl3, reported in the literature previously were performed using the Redlich-Kister model. Binary interaction parameter for MgCl2-UCl3 was higher than that for NaCl-MgCl2 and lower than that for NaCl-UCl3. As an example, calculated density of 0.62 NaCl: 0.18 MgCl2: 0.20 UCl3 at 873 K was 2.578 g·cm−3. In our further study, the methodology using Redlich-Kister model will be applied to more complex multicomponent systems and to other physical properties such as viscosity, thermal conductivity, surface tension, etc.