Mealworm, Tenebrio molitor L. (Coleoptera: Tenebrionidae) has high and safe protein contents, which enables it to be animal feed. However, occurrence of entomopathogenic fungi in mealworms is one of the limitations for mass production. In this work, we investigated relationships between abiotic conditions and occurrence of fungal pathogens and established an effective control method using fungicides. In virulence assay, third instar mealworm larvae were sprayed by six entomopathogenic Beauveria bassiana isolates and kept under high relative humidity; B. bassiana ERL1575 isolate had highest virulence. Under normal humidity, ERL1575 conidia showed different virulence between spray (~0% virulence) and digestion (~80% virulence) method. Furthermore, mealworms, which digested conidia, were exposed to various temperature (20-35°C) and humidity (1-3 ml distilled water spray/35 mm diam. dish) conditions for 5 days. All the treatments showed ~90% virulence except 35°C incubations (~20% virulence), but irrespective to the humidity conditions. Forty chemical fungicides were assayed against conidial germination and hyphal growth of ERL1575. Fluazinam and mancozeb showed strong inhibition of conidial germination at standard application dose (SD), 1/2 SD and 1/5 SD; besides, fluazinam showed strong inhibition of hyphal growth. When fluazinam and mancozeb were applied to the fungal conidia-inoculated wheat bran, most of mealworms were alive after 3 days post application. However, high mortality rate (~100%) were observed in the conidia-inoculated wheat bran without any fungicides. In conclusion, this work suggests that B. bassiana isolates could be pathogens at <30°C when they were digested by mealworms, and fluazinam and mancozeb would be used as effective control agents against the pathogen.

A research was conducted on Seoul regional elementary, middle, and high school nutritionists to study about their perception of HACCP control standards & performance conditions and sanitation & safety inspection, to seek for more efficient methods of school meals' sanitation system settlement. All surveys were distributed and collected via email. A total of 305 survey papers were collected, and out of these, 300 school results were analyzed. As for CCP 1 performance conditions, 43.3% of the nutritionist put emphasis on temperature control for cooking duration and 71.0% said that they manage both temperature and PHF food control. In CCP 2 stage, 65.8% of the nutritionists maintained the food's temperature, and 56.7% documented the recordings after cooking. A total of 79.3% of the schools scored above 90 points on school meal sanitation & safety inspection, 3.72 points on necessity for revisions, 3.38 points on objectivity, and 3.34 points on reliability. As for these results, a clear CCP control criteria as well as training must be set. Also, because the necessity of revision for sanitation & safety inspection is higher than reliability and objectivity, appropriate complementary measures must be taken.

Heating and air conditioning system is changing rapidly from the traditional HVAC central supply system to the individual supply system with electrical heat pump system (EHP) in Korean school buildings. The individual supply system has advantages to turn on and off individually and to adjust the thermal comfort separately, but energy is wasted in the unoccupied classroom when the last leaving occupant does not turn off the controller. If the controller is to be off automatically while the classroom is not in use, energy consumption would decrease dramatically. This project aims to cease the unnecessary EHP supply in vacant classroom by inputting the class schedule from the central control room to reduce the energy-spending. Experimental measurements were carried out between the controlled classroom that is turned off when not in use and the uncontrolled room that is turned on continually. Occupant's comfort and energy consumption were measured and compared between the controlled case and the uncontrolled case. The energy consumption of controlled classroom case is 30-60% less than that of the uncontrolled classroom case. This result shows that controlling the cooling supply for the unoccupied classroom using the class schedule can decrease the energy consumption remarkably. This supply control system can be used to conserve energy in school structures like universities.

In this study, the odor causing in the under-fired charbroiling restaurant was reported in literature investigation,pilot test and field experimental verification. The charbroiling restaurant causes odor complaints of Neighbors soefficient reduction method is requested. Acetaldehyde, ammonia, sulfur compound and the oil mist of white smokeare found to cause odor from the charbroiling restaurant. Pilot test results show that in the removal efficiency ofodor, Electrostatic Precipitation was 67.4%, absorption was 81.2%, adsorption was 74.2% and the ElectrostaticPrecipitation & Adsorption the hybrid system with 85.7% respectively. In the same condition of the hybrid system(Electrostatic Precipitation & Adsorption), the odor removal efficiency were higher when the design parameterssuch as the discharge voltage and current were high. The process efficiency were higher when as the implanterpole was cylindrical. However, the process efficiency rapidly reduced due to the contamination of the processcomponent or material, as the operating time of the equipment is increased. Therefore, fixed maintenance and repairof the equipment is found to be are very important, for long term operation. Therefore, as the experimental resultof this study, applying hybrid system removed odors caused in under-fired charbroiling restaurant which areunregulated, is more effective device that settle civil complaints and preserve environment.

풍진동에 의한 사용성의 문제를 해결하고 진동을 저감시키기 위하여 TLCD가 설치된 건물의 태풍에 의한 풍진동 계측결과를 바탕으로 시스템식별을 통하여 동특성 및 모달풍하중을 추정하고 TLCD의 풍진동 저감성능을 분석하였다. 대상건물은 인천 송도에 위치한 지상 64층 237m의 주거용건물로 상층부에 TLCD가 설치되었으며, 건물과 TLCD의 거동을 계측하기 위하여 풍향풍속계, 가속도계, 수위계및 인터넷기반 송수신시스템을 구축하였다. 계측된 건물의 가속도와 TLCD 액체의 변위결과를 바탕으로 구조물-TLCD 연계 모드를 식별하였으며 이를 바탕으로 구조물과 TLCD의 고유진동수를 식별하였다. 또한 계측된 구조물과 TLCD의 가속도응답으로부터 칼만필터를 이용하여 모달풍하중을 역추정하여 식별된 구조물의 동특성을 바탕으로 TLCD의 풍진동 저감성능을 분석하였다. 분석결과 TLCD의 설치로 인하여 태풍에 의한 풍진동이 최대 29.9% 정도 저감되는 것으로 나타났다.

본 연구에서는 초고층 건물의 풍동실험에서 얻어진 풍하중에 대하여 모드에 기초한 풍응답 해석을 수행하여 사용성을 검토하고, 목표 응답수준을 획득할 수 있는 수동 및 능동 질량형 장치의 예비설계까지 수행 가능한 프로그램을 개발하였다. 본 연구에서 개발된 프로그램을 실제 초고층 건물의 풍동실험결과에 적용하여 TMD와 AMD의 설계를 수행하였으며, 가속도 응답과 질량체 이송거리를 중심으로 결과를 비교분석하였다. TMD와 AMD 모두 요구되는 응답 수준을 만족하는 최소의 질량체를 사용하는 경우 질량체 이송거리가 증가하는 문제점이 발생하였다. 특히 AMD는 TMD 보다 적은 질량체로도 사용성 기준을 만족하는 응답수준을 획득할 수 있다는 장점이 있었으나, 질량체의 이송거리가 지나치게 커지는 문제점이 있으며, 고주파통과필터와 같은 부가적인 이송거리 저감대책이 요구된다.

장경간 교량의 낮은 감쇠비로 인하여 발생하는 구조물의 진동은 구조물의 안전성 및 사용성에 부정적인 영향을 미친다. 본 연구에서는 시공 중인 교량에 지배적으로 발생하는 연직 방향 진동을 제어하기 위하여 능동형 질량댐퍼(AMD)를 연구하였다. 대상 사장교의 동특성을 조사하기 위하여 모드 해석이 수행되었으며 이를 바탕으로 제어 성능과 설치 공간에 적합한 AMD를 설계하기 위하서 LQR(Linear Quadratic Regulator) 제어 알고리즘을 사용하였다. 성능 검증을 위하여 건설 단계의 대상 구조물과 AMD를 1/10.5의 상사비로 축소시킨 시작품을 설계, 제작하였으며, 시스템 식별을 수행하여 Linear Quadratic Gaussian (LQG) 제어 알고리즘을 적용하였다. 성능 실험 결과 AMD 제어 시에 높은 제어 효과를 구현하였으며, 실험 결과를 수치해석과 비교를 통하여 제어기 설계의 타당성을 확인하였다.

본 연구에서는 과수의 형태, 거리에 따라 약대가 항상 적정 살포 거리를 유지하며 작업을 진행할 수 있도록 초음파 센서의 신호를 실시간으로 받아 약대를 제어하였고, 또한 약대의 보호를 위하여 진행 방향에 장애물이 존재할 경우 회피할 수 있도록 프로그래밍 하였다. 제작된 시스템으로 현장에서 비 자동제어 상태와 자동제어 상태로 실험을 수행하였다. 실험은 과수의 기둥과 잎 부위에 감수지를 일정간격으로 설치하고 시스템을 이용하여 분사한 후 감수지의 영상을 스캔하여 영상처리를 통해 분석하는 방법으로 이루어졌다. 상 방향 분사 실험에서는 시스템과 대상의 거리가 0.9m~1.1m로 설정해둔 적정거리를 벗어나지 않았기 때문에 비 자동제어와 자동제어 상태 모두 양호한 결과를 보였다. 하지만 측 방향 분 사 실험에서는 비 자동제어 시 우측 열은 98.09%의 분 사율을 보였으나 좌측 열은 69.25%로 낮게 나타났다. 이는 실험이 수행된 배 과원의 경우 과수의 좌측 열이 수평하게 식재되어 있지 않았기 때문으로 비자동제어 상태에서는 좌측열의 과수에 분사되는 양이 줄어들었으나 자동제어 상태에서는 좌, 우측열의 과수에 분사되는 양이 각각 92.66%, 94.64%로 균일하게 나타났다. 시스템 의 제어 속도를 측정하기 위하여 방향 별 약대의 속도를 측정하였고 각각의 속도는 수직방향 100mm/s, 수평 방향 100mm/s, 각 변화 3o/s로 측정되었다. 초기 목적했 던 바와 같이 과수의 형태, 거리에 따라 약대가 적정 거리를 유지하며 작업을 진행함으로 인해서 균일한 살포량을 유지 할 수 있음을 확인하였다.

The latest cultivation research and development of seeding technology was improved because the demand for direct planting increased. The Programmable Logic Controller (PLC) and position sensor are utilized to control the seed detection system. In this paper, of seed types, RPM (Revolution per minute) variations and hole size are considered to determine the capacity of seeder hopper to meet the needs of customer demand. These algorithms were composed of the process of seed monitoring and the compulsion opening system. The capacity of seeding is assumed to be 1.53kg(11.6 liters) of rice seed per 1.8km. Therefore, this detection system can be used to determine the capacity according to seed types, RPM and hole size.

Quality management system(QMS) made by international standard organization(ISO) for the testing and analysis bodies is increasingly required when countries trade their goods according to global trade regulations. This paper mentioned how to build the quality management system on domestic environmental measurement institutions and international trends on global environmental market. A conformity assessment system corresponded with the global standard and regulations has sharply been on the rise in all industrial fields as well as the environmental markets. Accordingly we should construct an appropriate QMS operation to promote analysis precision and spreading to all industrial sectors in order to survive on rapidly changing the current tendency of the times. Through this way, we can have global competitiveness. Especially, the settlement of a systematic and scientific quality assurance system is the key subject from the environmental analytical bodies to every societal industrial institutions.

A document control system (DCS), ANSIM (KAERI Advanced Nuclear Safety Information Management) was designed for the purpose of documents preparation, review, and approvement for JRTR (Jordan Research and Training Reactor) project. The ANSIM system consists of a document management, document container, project management, organization management, and EPC (Engineering, Procurement and Construction) document folder. The document container folder run after specific contents, a revision history of the design documents and drawings are issued in KAERI. The EPC document work-scope is a registry for incoming documents in ANSIM, the assignment of a manager or charger, document review, preparing and outgoing PM memorandum as attached the reviewed paper. On the other hand, KAERI is aiming another extra network server for the NRR (New Research Reactor) by the end of this year. In conclusion, it is the first, computation system of DCS that provides document form, document number, and approval line. Second, ANSIM increases the productivity of performance that can be recognized the document work-flow of oneself and all participants. Finally, a plenty of experience and knowledge of nuclear technology can be transmitted to next generation for the design, manufacturing, testing, installation, and commissioning. Though this, ANSIM is expected to allow the export of a knowledge and information system as well as a research reactor.

Recently, functional building materials which are made of sorption materials have been widely used as board products, inorganic paints and wall papers. These remove chemical substances(VOCs, HCHO) from indoor air by physical sorption or chemical reaction and control humidity by capillary condensation. Also these materials have been used as countermeasures to sick building syndrome (SBS). However, in case of using internal building materials, the hazardous substances affecting to indoor air quality are emitted from not only the material itself but also the subsidiary materials such as adhesives for construction. Particularly in case of wallpaper and flooring material, the amount of emission from adhesives for construction is larger than that from the material itself. Therefore, this research tried to develop a technology system that can improve the performance of adsorption, absorption and desorption of moisture including the construction process that can affect to indoor air quality. To attend this end, ‘porous securement manufacturing technology system’ and ‘porous keeping construction technology system’ are developed that can secure more micropores in the process of production and construction of inorganic paint and maintain them. Consequently the reduction performance of chemical substances(VOCs, HCHO) concentrations and the humidity control performance improved almost over 30% by the technology system of the Inorganic paint.

PURPOSES: The purpose of this study is about noise which is generated from roads and is consist of irregular frequency variation from low frequency to various band. The existing methods of noise reduction are sound barrier that uses insulation material and absorbing material or have applied passive technology of noise reduction by devices. The total frequency band is needed to apply active noise control. METHODS: In this study applies to the field of road traffic environment, signal processing controller and various analog signal input/output, the amplifier module is based on parallel-core embedded processor designed. DSP performs the control algorithm of the road traffic noise. Noise sources in the open space performance of evaluation were applied. In this study, controller of active signal processor was designed based on the module of audio input/output and main controller of embedded process. The controller of active signal processor operates noise reduction algorithm and performance tests of noise reduction in inside and outside environment were executed. RESULTS : The signal processing controller with OMAP-L137 parallel-core processors as the center, DSP processors in the active control operations dealt with quickly. To maximize the operation speed of an object and ARM processor is external function keys and display for functions and evaluating the performance management system was designed for the purpose of the interface. Therefore the reduction of road traffic noise has established an electronic controller-based noise reduction. CONCLUSIONS : It is shown that noise reduction is effective in the case of pour tonal sound and complex tonal sound below 500Hz by appling to Fx-LMS.

ZnO nanoparticles in the size range from 5 to 15 nm were prepared by zinc-lithium-acetate system. The morphologies and structures of ZnO were characterized by TEM, XRD and FT-IR spectra. UV-visible results shows that the absorption of ZnO nanoparticles is blue shifted with decrease in particles size. Furthermore, photoluminescence spectra of the ZnO nanoparticles were also investigated. The ZnO nanoparticles have strong visible-emission intensity and their intensities depend upon size of ZnO nanoparticles.

최근 국내에 많이 보급되고 있는 이류체 포그 냉방시스템의 효율적인 제어알고리즘을 개발하기 위하여 다양한 조건의 분무사이클을 설정하여 토마토재배 온실에서 냉방실험을 실시하였다. 냉방효과는 평균 1.2~4.0℃를 보였고, 냉방효율은 평균 8.2~32.9%로 나타났다. 분무간격에 따른 실험에서 90초 분무사이클의 냉방효율이 가장 높았고, 대체로 분무시간이 길수록, 정지시간이 짧을수록 냉방효율이 높게 나타났다. 이류체 포그시스템의 분무량이 증가할수록 냉방효율이 높아지는 경향을 찾을 수 있었다. 그러나 분무량을 증가시키더라도 내부공기가 포화상태에 가까워지면 더 이상 증발이 일어나지 않으므로 내부공기가 포화상태에 도달하기 전까지 분무량을 증대시키는 방법으로 냉방효율을 높일 수 있을 것으로 판단된다. 냉방효율이 증가함에 따라 실내공기의 포차는 감소하였고 실내외 절대습도 차이는 증가하는 경향을 보였다. 포그의 증발량이 증가할수록 실내와 실외의 절대습도 차이는 커지고, 이에 따라 환기에 의한 수증기 배출이 잘 되어 다시 증발효율을 상승시키므로 냉방효율이 높아지는 순환구조를 갖게 되는 것으로 판단된다. 분무시간과 정지시간에 따른 실내공기의 포차변화를 회귀분석한 결과 10g·kg-1의 포차 변화에 필요한 분무시간은 120초, 정지시간은 60초로 나타났다. 그러나 온도의 진동폭을 줄이고 냉방효율을 높이기 위해서는 포차의 변동범위를 5g·kg-1으로 설정하여 60초 분무, 30초 정지가 더 적당할 것으로 판단된다. 이류체 포그시스템의 제어방식을 컴퓨터 제어시스템과 현재 보급되고 있는 간편제어시스템으로 분류하여 제어알고리즘을 유도하였다. 자연환기 온실에서 간편 제어시스템을 사용한다면 분무사이클을 60초 on, 30초 off로 설정하고 온도하한은 30~30~32℃, 습도상한은 85~90%로 설정할 것을 제안한다.

Most of steam power plant in Korea are heating the feed water system to prevent freezing water flowing in the pipe in winter time. The heating system is operated whenever the ambient temperature around the power plant area below 5 degree Centigrade. But this kind of heat supplying system cause a lot of energy consuming. If we think about the method that the temperature of the each pipe is controled by attaching the temperature measuring sensor like RTD sensor and heat is supplied only when the outer surface temperature of the pipe is under 5 degree Centigrade, then we can save a plenty of energy. In this study, the computer program package for simulation is used to compare the energy consumption load of both systems. Energy saving rate is calculated for the location of Youngweol area using the data of weather station in winter season, especially the January' severe weather data is analyzed for comparison. Various convection heat transfer coefficients for the ambient air and the flowing water inside the pipe was used for the accurate calculation. And also the various initial flowing water temperature was used for the system. Steady state analysis is done previously to approximate the result before the simulation. The result shows that the temperature control system using RTD sensor represents the high energy saving effect which is more than 90% of energy saving rate. Even in the severe January weather condition, the energy saving rate is almost 60%.

The alignments of polystyrene particles of 1μm and 5μm sizes in an aqueous colloidal system were observed by varying the electric field strength, the frequency and the water flow. Spherical mono-dispersed polystyrene particles dispersed in pure water were put into a perfusion chamber; an AC electric field was applied to the Au/Cr electrodes with a 4 mm gap on the glass substrate. The mixture of the 1μm and 5μm sized polystyrene particles at 0.5 vol% concentrations for each size was set in the dielectrophoresis conditions of 1 kHz and 150 V/cm. Large particles of 5μm size were aligned to form chains as the result of the dielectrophoresis force interaction. On the contrary, small particles of 1μm size did not form chains because the dielectrophoresis force was not sufficiently large. When the electric field increased to 250 V/cm, small particles were able to form chains. After the chains were formed from both large and small particles, they began to coalescence as time passed. Owing to the electroosmotic flow of water, wave patterns along the perpendicular direction of the applied electric field appeared at the conditions of 200 Hz and 50 V/cm, when the dielectrophoresis force was small. This wave pattern also appeared for small particles at 1 kHz and 150 V/cm conditions due to the flow of solvent when water was forced to circulate.

Appliances are connected with home network and intellectualization is being rapidly processed. As ubiquitous home is visualized, home sensor is intellectualized and developed with wearable form for the possible inter-home sensor information exchange. Based on the RFID and ubiquitous ID, the home sensors are expected to be developed for the diverse information. The sensor techniques has been intellectualized and diversified by expecting to be developed into perception sensor, extreme environment sensor, micro mechanical sensor, and biosensor. In this paper, the control algorithm of digital control system applicable to the real appliance is suggested. Infrared ray module of appliance is used with the purpose in supporting home network to the appliance in use. And the wireless sign transmitted from home server is transformed into infrared rays sign.