In this study, hybrid devices were developed to simultaneously remove odor and particulate matter (PM) emitted during meat grilling, and their performance was evaluated. A ceramic filter system and surfactant microbubble plasma system were used to reduce particulate matter. For odor reduction, an electro-oxidation system, an ozone-active catalytic oxidation system, and a multi-adsorption filter system were used. By combining the above particulate matter reduction and odor reduction devices, the reduction efficiency of odor and particulate matter generated during meat grilling was analyzed. As a result, most of the six combined device conditions showed a reduction efficiency of more than 90% for particulate matter. The combined odor also showed a high reduction efficiency of less than 200 times the emission concentration standard. This study also evaluated 22 types of odorous substances, of which ammonia (NH3) and hydrogen sulfide (H2S) showed removal efficiencies of more than 99%. Therefore, it is expected that the combination of these technologies can be used and applied directly to the sites where meat grilling restaurants are located to effectively contribute to the simultaneous reduction of particulate matter and odor.

As global climate change impacts become more apparent, countries are implementing various policies to achieve carbon neutrality that can be categorized into direct regulations and market-based indirect regulations. The latter, utilizing economic incentives, is considered more efficient in transforming corporate behavior and promoting voluntary efforts for carbon reduction. In alignment with international trends, South Korea has introduced the Emission Trading System (ETS) in 2015. Despite this, the domestic carbon market remains underdeveloped, with low ETS participation, particularly in the aquaculture sector. In order to activate external projects under the ETS, this study proposes short-term strategies including linking ETS with popular eco-friendly energy distribution projects, developing standardized monitoring techniques, and integrating carbon reduction initiatives with other support mechanisms such as direct payment programs. Long-term strategies focus on developing new methodologies for external projects, promoting the use of renewable energy, and enhancing technologies to reduce energy consumption in aquaculture operations. By implementing these strategies, the study aims to enhance the participation of the aquaculture sector in carbon reduction efforts, contributing to the overall goal of carbon neutrality.

Cars using diesel have always had problems with reducing exhaust fumes, and have been studied steadily in this regard. There were studies on the remanufacturing effect of DOC catalyst deactivated by diesel vehicle smoke reduction device, analysis of vehicle fire accident cases caused by damage to diesel vehicle smoke reduction device, and related studies on the remanufacturing effect of diesel vehicle smoke reduction device DPF. This study also developed a burner system in a smoke reduction device suitable for exhaust engines to completely burn smoke generated by institutions using diesel engines in low-temperature exhaust gases. Following the development of the existing high-performance heater, burner structure capable of maintaining ignition state in exhaust flow, pulsation generated by diesel engines, and exhaust flow control unit, the actual configuration, function and effect of the device, development contents, basic data and abnormalities of the vehicle, and comparison with other developed products.

Cars using diesel have always had problems with reducing exhaust fumes, and have been studied steadily in this regard. There were studies on the remanufacturing effect of DOC catalyst deactivated by diesel vehicle smoke reduction device, analysis of vehicle fire accident cases caused by damage to diesel vehicle smoke reduction device, and related studies on the remanufacturing effect of diesel vehicle smoke reduction device DPF. This study is also to develop an exhaust flow control unit suitable for an exhaust engine to completely burn smoke generated by an engine using a diesel engine in a low temperature exhaust gas. The main systems to be developed are high-performance heaters, burner structures that can maintain ignition in exhaust flows, and exhaust flow control units that reduce exhaust gas backflow effects caused by diesel engines.

ars using diesel have always had problems with reducing exhaust fumes, and have been studied steadily in this regard. There were studies on the remanufacturing effect of DOC catalyst deactivated by diesel vehicle smoke reduction device, analysis of vehicle fire accident cases caused by damage to diesel vehicle smoke reduction device, and related studies on the remanufacturing effect of diesel vehicle smoke reduction device DPF. This study also developed an optimized system for complete combustion of smoke generated by institutions using diesel engines in low-temperature exhaust gases. The main systems to be developed are high-performance heaters, burner structures that can maintain ignition in exhaust flows, and exhaust flow control units that reduce exhaust gas backflow effects caused by diesel engines.

Cars using diesel have always had problems with reducing exhaust fumes, and have been studied steadily in this regard. There were studies on the remanufacturing effect of DOC catalyst deactivated by diesel vehicle smoke reduction device, analysis of vehicle fire accident cases caused by damage to diesel vehicle smoke reduction device, and related studies on the remanufacturing effect of diesel vehicle smoke reduction device DPF. This study also developed a burner system in a smoke reduction device suitable for exhaust engines to completely burn smoke generated by institutions using diesel engines in low-temperature exhaust gases. The main systems to be developed are high-performance heaters, burner structures that can maintain ignition in exhaust flows, and exhaust flow control units that reduce exhaust gas backflow effects caused by diesel engines.

Cars using diesel have always had problems with reducing exhaust fumes, and have been studied steadily in this regard. There were studies on the remanufacturing effect of DOC catalyst deactivated by diesel vehicle smoke reduction device, analysis of vehicle fire accident cases caused by damage to diesel vehicle smoke reduction device, and related studies on the remanufacturing effect of diesel vehicle smoke reduction device DPF. This study is also to develop a burner structure in a smoke reduction device suitable for an exhaust engine to completely burn smoke generated by an engine using a diesel engine in a low-temperature exhaust gas. The main systems to be developed are high-performance heaters, burner structures that can maintain ignition in exhaust flows, and exhaust flow control units that reduce exhaust gas backflow effects caused by diesel engines.

본 연구에서는 소형선박용 중·고속 디젤엔진에 적용하여 연구 중인 SCR+DPF 기술을 저속엔진이 설치된 선박에 탑재하여 해상 실증 시험을 수행하였다. 대상 선박(총 톤수 2,881 톤, 정격출력 1,470kW@240rpm ×1)은 국내 연해를 운항하는 일반화물선으로 배출저감설 비의 선박 탑재를 위해 도면 개발, 승인 및 선박 임시검사를 수행하였다. 저감성능 확인을 위해서 가스상물질 측정장비는 NOx technical code 및 ISO-8178의 분석방법을 준용하는 장비를 사용하였으며, 입자상물질 측정장비는 국제해사기구(IMO)에서 논의하고 있는 블랙카본 측정 방법 중 하나인 스모크미터를 사용하였다. 시험은 황 함유량 따라 MGO(0.043%), LSFO(0.42%) 2종의 연료를 사용하였으며 실제 운항 하는 엔진회전수(130, 160 및 180 rpm)를 고려하여 시험 조건을 설정하였다. 시험 조건에 따라 배출저감설비의 전·후단에서 가스상 및 입 자상(매연) 물질을 측정하여 배출저감설비의 저감효율을 확인하였으며 모든 시험 조건에서 NOx의 경우 90% 이상, 입자상물질(매연)의 경우 95% 이상의 저감효율을 확인하였고 엔진 성능의 영향을 줄 수 있는 배기가스 압력은 허용배압 기준인 50mbar 이하를 만족하였다. 본 연구를 통해 해상실증 연구의 중요성과 중소형 저속엔진 선박의 질소산화물 및 입자상물질의 동시 저감을 위한 대응 기술로 SCR+DPF 설비 적용 가능성을 확인할 수 있었다.

This review comprehensively summarizes the livestock odor reduction method by dietary manipulation, in-housing management, and manure management. The gut microbial metabolism of animals can be stimulated by low-crude protein feeding and the addition of probiotics, enzymes, plant extracts, and/or organic acids to their feed. These methods can result in reduced odor emissions from manure. For in-housing management, it is important to maintain the proper breeding density in the barn facilities, regularly remove dust and manure, and periodically clean the barn facilities. A barn using litter on the floor can reduce odor at a relatively low cost by adding adsorbents such as zeolite, biochar, etc. Although masking agent spraying can be the simplest and quickest way to control odors, it is not a fundamental odor mitigation strategy. Odor emissions can be reduced by installing covers on manure slurry storage facilities or by acidifying the manure slurry. It is necessary to install a solid-liquid separator in an enclosed facility to minimize odor emissions. Other methods for reducing odor emissions include covering manure composting plants with semi-permeable membranes or using reactor composting technology. In order to minimize odor emissions in the liquid manure composting, sufficient oxygen must be supplied during the fermentation process. Furthermore, the odor reduction effect can be achieved through the liquid manure pit recharge system which supplies matured liquid manure fertilizer to the slurry pit in the pig house.

선박용 엔진에서 배출되는 배기가스에는 다량의 수분과 미세먼지를 포함하고 있다. 미세먼지에는 여과성 미세먼지와 배기 배 출 후 액상으로 변화하는 응축성 미세먼지가 포함되어 있으며 배출 전에 걸러지는 고체상 미세먼지보다 응축성 미세먼지가 더 많은 것으 로 보고되고 있다. 본 연구에서는 배기가스의 배기열과 수분을 회수하고 응축성 미세먼지를 제거하기 위한 실험장치를 실험실 내의 가스 보일러 배기가스를 이용하여 테스트 하였다. 배기가스는 1차적으로 냉각방식으로 수분과 응축성 미세먼지가 제거되고 2차적으로 흡수제 방식에 의해 추가적으로 수분이 제거되었다. 상대습도 측정에 의한 배기가스 수분 제거율을 계산하면 1단계 배기냉각 방식으로 73%, 2단 계 흡수제 방식으로 90% 제거되는 것으로 측정되었다. 이 과정에서 응축성 미세먼지는 80~90% 제거되는 것으로 측정되었다. 개발 시스템 에 의해 회수된 열은 공정열로 활용할 수 있으며, 회수된 물은 수처리 과정을 통해 공정수로 활용할 수 있다. 또한 현재 관리 규제가 되고 있지 않지만 미세먼지의 주요 원인인 응축성 미세먼지를 효과적으로 제거할 수 있을 것으로 기대된다.

미세먼지 등 대기오염이 일상화되고 국민 건강을 위협하면서 육상뿐만 아니라 해상 선박에서 발생하는 대기오염물질에 대한 관리 필요성이 대두되고 있다. 이에 본 연구는 선박 배출량 현황을 바탕으로 해양경찰 업무 중심의 선박 대기오염물질 점검 실태를 진단 하고 배출 저감을 위한 국가 관리 대책을 제안한다. 최근 국립환경과학원(NIER, 2018)에 따르면 선박에서 배출된 총량(CO, NOx, SOx, TSP, PM10, PM2.5, VOCs, NH3, BC)은 국내 전체 발생량의 6.4 %로 나타났고, 이 중 NOx는 13.1 %, SOx는 10.9 %, 미세먼지(PM10/PM2.5)는 9.6 %를 차지하고 있다. 선박 발생량 중에서는 국내외 입출항 화물선이 50.6 %로 가장 많은 배출을 보였고, 어선의 배출 비율도 42.6 %로 적지 않 음을 알 수 있었다. 지역적으로 해양경찰 관할 5개 권역을 기준으로는 부산항, 울산항을 포함한 남해권 44.1 %와 광양항, 여수항을 포함한 서해권 24.8 % 순으로 배출이 많았다. 해양경찰은 대기오염물질 관리를 위해 승선 점검을 통한 선박 배출 상황을 관리하고 있지만, 각종 배출 장치의 가동이나 연료유 기준 등의 실측에는 많은 시간과 노력이 필요하고, 또한 선박의 바쁜 운항스케줄에 따른 제약으로 대부분 서류상의 점검으로 진행됨으로써 관리에 한계가 있다. 따라서 선박 대기오염물질 관리를 위해서는 대기오염물질 발생을 실측 점검으로 바꾸도록 규제를 강화하고 해경 함정 등을 활용한 해역별 모니터링 시스템을 구축하여 실질적 현장 데이터에 기초한 관리가 이뤄지도록 하는 한편, 장단기적으로 환경친화적 선박 도입을 위한 기술 개발과 법·제도적 지원이 필요하다.

In order to reduce odor and methane emission from the landfill, open biocovers and a closed biofilter were applied to the landfill site. Three biocovers and the biofilter are suitable for relatively small-sized landfills with facilities that cannot resource methane into recovery due to small volumes of methane emission. Biocover-1 consists only of the soil of the landfill site while biocover-2 is mixed with the earthworm casts and artificial soil (perlite). The biofilter formed a bio-layer by adding mixed food waste compost as packing material of biocover-2. The removal efficiency decreased over time on biocover-1. However, biocover-2 and the biofilter showed stable odor removal efficiency. The rates of methane removal efficiency were in order of biofilter (94.9%)>, biocover-1(42.3%)>, and biocover-2 (37.0%). The methane removal efficiency over time in biocover-1 was gradually decreased. However, drastic efficiency decline was observed in biocover-2 due to the hardening process. As a result of overturning the surface soil where the hardening process was observed, methane removal efficiency increased again. The biofilter showed stable methane removal efficiency without degradation. The estimate methane oxidation rate in biocover- 1 was an average of 10.4%. Biocover-2 showed an efficiency of 46.3% after 25 days of forming biocover. However, due to hardening process efficiency dropped to 4.6%. After overturn of the surface soil, the rate subsequently increased to 17.9%, with an evaluated average of 12.5%.

PURPOSES: Recently, many local governments have applied chicanes for traffic calming to ensure environment-friendly comfortable and safe roads. However, the geometry of a chicane is designed for speed reduction using a curved portion. This study aims to improve the road geometry conditions of chicanes for reducing carbon emissions and maintaining appropriate driving speeds by considering the relationship between road geometry and carbon emissions. METHODS: This study was conducted as follows. First, carbon emissions corresponding to changing acceleration of vehicles were studied. Second, vehicle acceleration caused by the relationship between the curve radius and the straight length was studied. Accordingly, desirable conditions of curve radius and length of the straight section for reducing carbon emissions were proposed. RESULTS: The existing literature on chicanes present the minimum value of stagger length and path angle in the primary variable condition. This study suggests the maximum values of the curve radius and length of straight section in the primary variable condition. Therefore, if a vehicle’s speed at a chicane is 30 km/h, this study suggests a curve radius of up to 24 m. In addition, if the vehicle’s speed is 24 km/h, this study suggests a length of straight section of up to 6.6 m. These are the geometric conditions for considering the control of acceleration to the vehicle’s maximum speed. CONCLUSIONS: This paper proposes an application of geometric conditions to reduce carbon emissions and maintain appropriate speeds of vehicles through a combination of curve radius and length of straight section.

The performance of five kind adsorbents, which can reduce nitrogen oxide (NOx) from the diesel engine occupying 85% of the fishing boat, was carried out and the emission reduction filter was manufactured and evaluated in the adsorption efficiency of the emission gas for 240 KW diesel portable generator. As a NOx emission filter made of mordenite which has an excellent cation exchange capacity was manufactured by ball type adsorbents having excellent specific surface area. The adsorption efficiency of mordenite material applying the emission reduction filter began to show up at the operating time 10 minutes in comparison with the activated carbon and zeolite materials, and it was exposed to continue until 100% capability with passing by 20 minutes. So the adsorption efficiency of the NOx reduction filter consistently maintained at the averaged 80%.