This study aims to evaluate traffic safety facilities in school zones in Busan Metropolitan City through Importance-Performance Analysis. This study investigated the traffic safety facilities in nine school zones, which have relatively more traffic accidents in Busan Metropolitan City from 2020 to 2022, through a field study and an Analytic Hierarchy Process(AHP). It identified their performance(i.e., compliance rate) and importance to derive measures for the improvement of traffic safety facilities in school zones. The field study showed that the compliance rate of starting points among traffic safety signs was low, and no speed limits were complied with the installation regulations among traffic road markings, but road safety facilities were generally well managed and operated. As a result of AHP, the order of importance was road safety facilities, traffic safety signs, and traffic road markings. More specifically, speed bumps, safety signs, and crosswalks were found to be more important than others in road safety facilities, traffic safety signs, and traffic road markings, respectively. Importance- Performance(compliance) Analysis revealed that the traffic safety facilities necessary to be most urgently improved are starting points. This result can be resorted to underlying measures to determine priorities for installing and operating traffic safety facilities in school zones.

Recently, the damage caused by typhoons and strong winds frequently displayed according to world climate change tends to be increasing. In the case of soundproof / windproof wall installed on the road, frequent occurrence does function for damage due to strong wind. As a result, in this study, strong wind fragility evaluation was performed to predict the degree of damage of strong winds of soundproof / windproof walls. We were conducting research focusing on the destruction mode in which the overall destruction of the sound barrier caused by the destruction of the aluminum frame occurs. Three node bending experiments were conducting for grasping the material properties of a soundproof wall aluminum frame that is currently being constructed on a road. Based on the results of this experiment, the resistance performance of the target structure was calculated, the frame breakage was selected as the limit state, and the wind load acting on the simplified soundproof wall model was measured using the Monte Carlo model model technique to measure.From now on, through the additional study, it will be necessary to proceed with a more accurate evaluation of the safety against strong windsof the soundproof wall structure using the vulnerability evaluation execution and the setting of the limit state.This study is expected to be the basic data of the study on prediction technique of wind - induced damage of soundproofing and windshield walls in the future.

해양에서의 안전확보는 아무리 강조해도 지나치지 않다. 요즘 국내의 관심을 집중시켰던 해양사고중의 하나는 세월호 사고와 더불어 우이산호 사고이다. 이 사고는 2014년 1월 31일 여수 GS-Caltex 원유부두로 진입하던 싱가포르 국적 초대형 유조선(VLCC) “우이산호(WU YI SAN)”가 원유부두와 원유이송 송유관과 충돌하여 송유관 내부에 있던 유류가 해상으로 유출된 사고로서 1995년 여수해안에서 발생한 5천톤 가량의 유류유출사고가 발생한지 거의 20년만의 일이다. 울산항의 유출사고 사례는 2013년에 대형정유업체인 SK 에너지에서 운영하는 부유식 호스의 파손으로 인한 유출사고가 있었다. 이와 관련하여 현재 각 회사에서 운영중인 자체안전관리계획서 승인제도는 위험물 취급에 관한 최고경영자의 관심 결여 및 정부당국의 안전 관리 감독 소홀로 인하여 큰 역할을 못하고 있는 실정이다. 이에 이 논문에서는 현행 개항질서법상 규정되어 있는 위험물 취급 시설물에 대한 자체안전관리계획서 승인제도의 문제점을 파악하고 이에 대한 개선방안을 도출하여 위험물 취급 시설물에 기인한 사고방지, 환경보호 및 안전 확보에 기여하고자 한다.

For the matter of elevator, one of the multi-use facilities for unspecified public, the JIS has re-established and reformed to apply to the environment in South Korea for the past 20 years. In the aspect of safety assurance, it was inevitable to suggest improved measures. The government, Ministry of Public Administration and Security has secured the safety by enhancing the safety management functions in the elevator inspection standards and expanding its safety device measures. Further, the international inspection standard has been introduced, which is about unifying inspection standard system into the international standard code. In March 14th 2012, the international standard (EN) has been amended and fully announced. Escalator and passenger conveyor among lift devices have several common danger factor that cause safety accident. First, the accident caused by decreased braking power of brake. Second, the accident caused by the rate difference between handrail and tread-board. Third, the accident caused by defects of contraflow preventing device or carelessness inspection. Fourth, the accident caused by wet tread-board or wet floor of platform which makes passenger slip and fall. As the improvements to prevent and reduce these negligent accidents, the inspection list to check and methods should be subdivided and applied for each accident likelihood cause for safety management enhancement and safety assurance of existing escalator and passenger conveyors. The escalators and passenger conveyors without safety devices in existence should be obliged to modify the part of the system or install additional safety device. With making these measures obligations, it requires to improve the system to be suitable for the international inspection standard and to have measures to prevent safety accidents. It also needs to arrange improvements for skid accident of tread-board by the external environment factors such as snow and rain.

PURPOSES: This study is to develop a road traffic sign recognition and automatic positioning for road facility management. METHODS: In this study, we installed the GPS, IMU, DMI, camera, laser sensor on the van and surveyed the car position, fore-sight image, point cloud of traffic signs. To insert automatic position of traffic sign, the automatic traffic sign recognition S/W developed and it can log the traffic sign type and approximate position, this study suggests a methodology to transform the laser point-cloud to the map coordinate system with the 3D axis rotation algorithm. RESULTS: Result show that on a clear day, traffic sign recognition ratio is 92.98%, and on cloudy day recognition ratio is 80.58%. To insert exact traffic sign position. This study examined the point difference with the road surveying results. The result RMSE is 0.227m and average is 1.51m which is the GPS positioning error. Including these error we can insert the traffic sign position within 1.51m CONCLUSIONS: As a result of this study, we can automatically survey the traffic sign type, position data of the traffic sign position error and analysis the road safety, speed limit consistency, which can be used in traffic sign DB.

본 연구에서는 도로의 증가와 더불어 급속히 증가하고 있는 터널에서 차량이 터널에 진입할 때의 속도편차를 분석하여 터널입구부의 안전성을 증진할 수 있는 방안에 대하여 연구하였다. 터널의 존재는 운전자에게 그 자체만으로서 단순한 오르막 경사보다 더 큰 속도 감소를 유발하며, 터널 입구부에서 발생하는 차량 충돌사고는 다른 도로구간에서 발생하는 사고와 비교해 볼 때 피해가 더 크다. 따라서 사고로 인한 피해를 경감시키기 위해 터널 입구부에 PE방호벽이나 가드레일 등의 안전시설을 설치하고 있지만, 운전자에게 이것은 또 다른 장애물로 인식될 수 있다. 터널 입구부에 설치되어 있는 안전시설물의 형태는 크게 PE방호벽, 가드레일, PE 드럼 등이 있으나, 본 연구에서는 고속도로터널 입구에 일반적으로 가장 많이 설치되어 있는PE방호벽과 운전자에게 장애물로 인식될 수 있는 이러한 안전시설물이 설치되어 있지 않은 경우로 크게 구분하였다. 또한 터널 내부로 진입 할 때 갓길을 포함 우측방여유폭의 차이가 큰 경우와 작은 경우로 구분하였다. 4가지 형태의 터널 입구부에서의 차량속도와 일반도로구간에서의 YDS(차량검지체계)로 수집된 속도의 차이를 분석에 사용하였다. 통계적 검증을 통하여 안전시설물 설치 형태와 우측방여유폭의 차이에 따른 각 Case별 유의성을 검토하여 터널 입구부 안전성 증진을 위한 대안을 제시하고자 한다.

1995년 제정된 "시설물의 안전관리에 관한 특별법"에 근거하여 일정 규모 이상의 1종 및 2종 시설물을 대상으로 정기점검, 정밀점검, 정밀안전진단이 관련전문가에 의하여 주기적으로 수행되고 있으며, "재난 및 안전관리 기본법" 에 의하여 특정관리대상시설을 지정하여 주기적인 안전점검이 수행되고 있다. 그러나 수작업에 의한 안전관리 업무 수행과 점검 및 진단 결과에 대한 사후 관리로 관계 업무 주체들에게 과다한 업무가 부과되면서도 안전관리가 효율적이고 효과적으로 이루어지고 있지 못한 상황이다. 또한 관련 업무가 서로 다른 법령 및 기관에 분산되어 업무의 비효율성을 야기하고 있다. 이에 본 연구는 국가지리정보시스템(NGIS)이 제공하는 시설물에 관한 지리정보를 중심으로 서로 다른 법령과 기관에 의하여 수행되는 시설물 안전관리 관련 정보를 통합 관리할 수 있는 시설물 안전관리시스템 개발을 목적으로 수행되었다.

Since 1995, the facility of class 1 and 2, classified by law had been subject to system of post maintenance management where periodic safety inspection and diagnosis to identify any problems and to take appropriate measures as a matter of urgency. Although the standards and systems had been revised many times for continuous improvement due to surrounding environmental factors, the technical factors and other factors for improvements, continuous researches and efforts are needed to ensure even higher effectiveness. Furthermore, the consciousness of the management body that executes and implements such improvements for facility management is most important. Therefore in this study, through such analysis, more realistic management consciousness review was performed. Also the direction for improvements is proposed, to carry out more effective facility safety management systems implementation.