선박 발전기의 여자기는 출력 단자 전압을 일정하게 유지하기 위하여 여자전류 제어를 통해 자속을 조정한다. 여자기 내부에 있는 전압제어기는 통상적으로 비례 적분 제어방식이 사용되는데 게인과 시정수에 의해 결정되는 응답 특성은 적절치 못한 설정값에 의 해 원하지 않는 출력을 내며 이로 인해 선내 전력의 품질과 안정성을 떨어뜨릴 수 있다. 본 논문에서는 IEEE에서 제공하는 AC4A 타입의 여자기 모델을 통해 얻을 수 있는 안정적인 입출력 데이터를 활용하여 신경망 회로를 학습시킨 후 기존의 비례 적분 제어방식의 전압제 어기를 학습된 신경망 회로 제어기로 대체하여 시뮬레이션을 수행하였다. 그 결과 기존 대비 최대 9.63%까지 오버슈팅이 개선되었으며, 안정적인 응답 특성에 대한 우수성을 확인하였다.

Cars using diesel have always had problems with reducing exhaust fumes, and have been studied steadily in this regard. There were studies on the remanufacturing effect of DOC catalyst deactivated by diesel vehicle smoke reduction device, analysis of vehicle fire accident cases caused by damage to diesel vehicle smoke reduction device, and related studies on the remanufacturing effect of diesel vehicle smoke reduction device DPF. This study also developed a burner system in a smoke reduction device suitable for exhaust engines to completely burn smoke generated by institutions using diesel engines in low-temperature exhaust gases. The main systems to be developed are high-performance heaters, burner structures that can maintain ignition in exhaust flows, and exhaust flow control units that reduce exhaust gas backflow effects caused by diesel engines.

판형 열교환기는 1920년대부터 본격적으로 상업화되었으며, 이후 판형 열교환기의 기본 컨셉은 지금까지도 거의 변화가 없었지만 고온, 고압 그리고 대용량 열교환에 적용되기 위해 설계 및 제작 방법들이 혁신적으로 발전하여 지금에 이르게 되었다. 판형 열교환기의 개발 트렌드는 전열 효율이 좋으면서 압 력강하가 낮고 또한 유체 분배가 잘되는 전열판의 개발과 일치한다. 본 연구에서는 이러한 트렌드를 만족 시키는 선박용 중속엔진 오일 냉각용 판형 쿨러 개발과 관련된 주요 과정들을 소개하고, 또한 개발된 판형 오일쿨러의 전열성능을 실험적으로 분석하여 이에 대한 결과를 제공하고자 한다. 본 연구에서 판형 쿨러는 구조적 특징으로 인해 직접 판벽 온도를 측정할 수 없어 수정된 Wilson Plot 방법을 응용하여 열전달계수를 구하였다. 오일-물 실험 전에 물-물 실험을 통해 우선 물측의 열전달계수와 압력강하량을 구하였고, 그 결과를 바탕으로 오일측의 열전달계수를 구하였다. 양측 모두 유량 증가에 따라 열전달 성능은 증가하였지 만, 압력강하량도 동시에 증가하였다. 그리고 실험을 통해 본 연구에서 개발된 판형 오일쿨러가 개발목표치를 성공적으로 달성하였음을 확인할 수 있었다.

In this study, the change of cooling water temperature (72, 85, 95 ℃) and engine speed (1,800, 2,000, 2,200, 2,400rpm) were experimentally investigated to confirm the operation performance characteristics of auxiliary engine for refrigeration unit. The experimental setup consisted of fuel consumption meter, power meter, and heat transfer unit. The operation performances such as BSFC, exhaust temperature, power generation, and engine efficiency of the auxiliary engine showed similar characteristics in the present experimental range, according to the change of cooling water temperatures and rpms. As the torque increased, the BSFC decreased significantly and the exhaust temperature increased. The power generation increased linearly and the efficiency was insignificant at more than 40 Nm torque.

The fuel used in this study, DMM is an oxygen additive containing 42.5% oxygen by weight and dissolved in diesel fuel, also known as methyl alcohol or Dimethoxymethane (CH3-O-CH2-O-CH3). DMM, which is a colorless liquid, shows chemical characteristics of gas-liquid and is also used as a diesel fuel component. In this study, five mixtures were added to the common diesel fuel at DMM addition rates of 2.5, 5, 7.5, 10 and 12.5% by volume. A single cylinder, four strokes, DI diesel engine was used as the test engine. Experimental data were also collected at 24 engine speed-load conditions operating in steady state. The purpose of this experiment was to study the effect of the addition ratio of oxidized fuel mixed in diesel fuel on engine power and exhaust performance. When compared with the common diesel fuel, the exhaust of Smoke was substantially reduced in all DMM mixing ratios. These results indicate that DMM can be an effective blend of diesel fuel and is an environmentally friendly alternative fuel. This study also shows that smoke and NOx emissions can be reduced at the same time through the application of oxygen fuel and EGR.

The effect of gasoline-ethanol blends on performance and NOx emission was investigated in a SI engine with port and direct fuel injection systems. The 1-D cycle simulation program of GT-Power was utilized to analyze the performance of thermodynamic cycle. The results showed that the brake torques are increased with the addition of ethanol to gasoline because of the improvements of volumetric efficiency. The engine with direct ethanol blends injection system has more power than that with port gaoline injection system, which is caused by the higher latent heat of ethanol.

The performance of organic Rankine cycle was numerically investigated to recover heat from the exhaust of a heavy-duty diesel engine. Exhaust flow rates and temperatures are obtained from the simulation of diesel cycle by using GT-Power. The net power outputs of organic Rankine cycle for 9 working fluids were calculated by cycle simulations. The results showed that as for the net power outputs and the pressure of working fluids, R21 and R245fa are suitable as working fluids for ORC in diesel engine.

This paper analyzes the simulation operation flow of Bullet physics engine. Based on this analysis, four kinds of multi-rigid-body game characters are designed. This paper also profiles the performance metrics such as the CPU utilization, the memory usage, and the computation time by multi-rigid-body character simulations. For the CPU utilization, the Tongs Vehicle is the best and provides 45.1% less than the other character simulations. The computation times of the Four-leg robot and the Dragon are longer than those of the others. The memory usage of the Dragon simulation is the largest, which is average 1.32 times more than the others. Because all parts of Dragon are composed of triangular mesh models in 3DMax. The performance profiling with the criteria such as reducing the computation time and the computing resources, the complexities of the collision shapes, and the number of rigid bodies takes an important role in the design of the multi-rigid-body game characters.

PURPOSES : The purpose of this study is to revise the weight to power ratio of the representative truck in S. Korea. So far, S. Korea has been using the unit lb/hp, and the construction machines were not considered in the evaluation of the performance of trucks. METHODS : This study was performed to recommend the use of ISO system of units, and to analyze the weight to power ratios of the representative trucks in S. Korea, including the dump trucks, concrete mixer trucks, and asphalt and concrete diffusers. RESULTS: From this study, the 85 percentile value of the weight to power ratio of the trucks in S. Korea’s was found to be 103.6 kg/kw. CONCLUSIONS : The performance standard for the representative truck has to be increased upward, considering the travel pattern of the dump trucks, concrete mixers, and asphalt and concrete diffuser trucks, travel distances, narrow area (work zone) of operation, and the saving in construction budget for climbing lane. Based on this study, the weight to power ratio of the representative truck in S. Korea could possibly be revised to 100~110 kg/kW.

This study is designed to measure the impact of a car’s horse power and torque - aspects related to performance among various factors that affect consumer purchase decision-on consumers when buying a car. The research of the results can be interpreted as indicating that the premise, “The impact of torque and horsepower on consumer purchase decision is not significant,” is true.

Increasing specific power, torque and high responsibility have come to the fore as the important strategy of reducing fuel consumption in vehicle engines. Therefore, the boosting performance of various boosting devices has been investigated using a diesel engine simulation program. For the comparison of boosting performance, the simulation result of a naturally aspirated 2.0 liter engine is used as a basis. Subsequently, the boosting effects of single turbocharger, single supercharger and 2-stage boosting system combined with a turbocharger and a supercharger are compared at the same engine condition. The simulation results show that the 2-stage boosting system can attain lower specific fuel consumption and higher air mass flow. In low engine speed range, a supercharger mainly leads higher boosting performance with higher responsibility in the combined boosting system.

This experimental work was performed to reveal the effect of intake air temperature on the improvement of performance and exhaust emissions in a SI engine. To achieve this, fuel consumption rate, combustion pressure, rate of heat release, and reduction of exhaust emissions were measured and compared in 4-cylinder spark ignition engine. It was founded that lower intake air temperature can lead higher combustion pressure and heat release rate due to the higher intake air flow rate, volumetric efficiency, and fuel consumption rate. At the same time, higher intake air temperature leads to the longer ignition delay time, therefore, retarded ignition of engine was observed. Lower CO and HC values were also observed as the intake air temperature increases.

The gas flow and heat transfer inside an EGR cooler for a diesel engine are numerically analyzed to investigate the performance of EGR cooler. The commercial code FLUENT is utilized to simulate a single spiral tube with constant wall temperature condition. The numerical analysis is performed with the variation of exhaust gas flow rates according to engine speed. The computational results agree well with the experimental results published before. The results show that the maximum error rate is about 0.6% for all operating conditions. Thus a single tube model with constant wall temperature condition is appropriate for simulating EGR cooler.

In a bi-fuel engine using gasoline and LPG fuel, with the current ignition timing for gasoline being used, the optimum performance could not be taken in LPG fuel supply mode. The ignition timing in LPG fuel mode must be advanced much more than that of gasoline mode for the compensation of its higher ignition temperature. The purpose of this study is to investigate how the ignition spark timing conversion influences the engine performance of LPG/Gasoline Bi-Fuel engine. In order to investigate the engine performance during combustion, engine performance are sampled by data acquisition system, for example cylinder pressure, pressure rise rate and heat release rate, while change of the rpm(1500, 2000, 2500) and the ignition timing advance(5°, 10°, 15°, 20°). As the result, between 1500rpm, 2000rpm and 2500rpm, the cylinder pressure and pressure rise rate was increased when the spark ignition was advanced but pressure rise rate at 20° was smaller value.