In this study used Computational Fluid Dynamic analysis to examine NOx reduction in hydrogen combustion, analyzing six conditions with varying air/fuel ratios, temperatures, and concentrations. Results were compared between two combustor shapes and previous experimental data. Findings showed increased air/fuel ratios decreased flame temperature and increased post-combustion O2. NOx emissions peaked at high temperatures and low O2. Numerical results aligned with previous experimental trends, validating the approach. Combustor shape differences, reflecting variations in fuel and air pipes, significantly affected flow rates and combustion positions. This reduced NOx emissions up to a certain air/fuel ratio, but excessive increases diminished this effect. The study highlights the complex relationship between combustor design, operating conditions, and NOx emissions. Further research is needed to optimize NOx reduction by considering pipe numbers and combustion locations. Future studies should explore various combustor geometries, fine-tune air/fuel ratios, and investigate additional parameters influencing NOx formation and reduction in hydrogen combustion systems.

얕은 물에서 선박과 바닥의 상호작용으로 인해, 제한이 없는 깊은 물에서 운항할 때와 비교하여 저항이 증가하는 현상이 발생 한다. 이러한 천수효과에 의해 증가하는 저항은 주로 조파저항에 기인하기 때문에, 본 연구에서는 유람선을 대상으로 LCG(Longitudinal Center of Gravity)의 위치 변경을 통해 성능을 최적화하여 조파저항을 감소시키는 것을 목표로 진행하였다. 수치해석 시뮬레이션을 통해 LCG 위치를 최적화하여 저항의 최소값을 찾고, 이후 수심의 깊이에 따른 영향을 분석하였다. 분석 결과, 37.5% - 52.5% Lpp의 영역에서의 LCG 변화는 총 저항에 큰 영향을 주었으며, 깊은 물의 조건에서는 총 저항의 최대값과 최소값을 비교하였을 때, 72.67%의 큰 차이를 보이 는 반면, 얕은 물 조건에서는 그 차이가 62.97% 정도로 비교적 낮은 차이를 보인다. 수심의 깊이에 따른 효과는 수심이 낮을수록 총 저항 이 증가하는 경향을 보였다. 깊은 물과 비교하여 1.5m의 얕은 물에서는 총 저항이 최대 67.68% 가량 증가하는 것으로 분석되었다. 이 경우 총 저항 증가의 주요 원인은 전체 저항의 84.99%를 차지하는 조파저항에 의한 것으로 판단된다.

A cyclone separator is a device that separates solid particles from a fluid using centrifugal force and gravity in its inner chamber. Among cyclone separators, the separator that uses water as a working fluid is called as hydrocyclone separator, which has been developed for the purpose of dehydrating solid mixtures with a proportion of solids floating in liquids greater than 1, such as soil, coal, and cement slurry. In this paper, a hydrocyclone was designed based on the previously proposed design method, and how different the performance is from the targeted value was investigated using the computational fluid dynamics.

The importance of urban green space creation is increasingly recognized as the most realistic and efficient approach for fine dust mitigation in urban areas. Particularly considering the characteristics of domestic cities, the application of buffer green spaces along roads can maximize the efficiency of fine dust reduction without the need for separate green space creation. Accordingly, this study analyzed the fine dust mitigation effects based on the types of plantings in the central dividers and roadside trees in Jeonju City, Jeollabuk-do. To do this, we controlled various external variables of urban space and considered the planting arrangement types in the central dividers, carrying out the analysis using a CFD simulation. The simulation results confirmed that the central dividers with plantings demonstrated more effective ultrafine dust reduction than those without. Moreover, the arrangement of roadside trees showed a greater ultrafine dust reduction effect when adopting a multilayered structure compared to a single layer. Based on these findings, we concluded that installing both trees and shrubs simultaneously in the central dividers and along roads was effective for ultrafine dust mitigation. On this basis, we quantified the dust reduction effects of plants in urban street environments and proposed planting guidelines for roadside green spaces to improve air quality.

Microclimate analysis was conducted through actual measurement according to land use status in urban, and CFD analysis was conducted to analyze and predict the microclimate characteristics of urban, and compared and analyzed with the actual measurement results. It was measured in high-rise areas and parks, and the temperature of the park area was 0.4 to 0.6℃ lower, and the relative humidity was 1.0 to 3.0% higher. The correlation coefficient was obtained by comparing the results of the computational fluid analysis with the results of the computational fluid analysis at the actual location located within the CFD analysis area for validation. The seasonal correlation coefficients are all higher than 0.8, so it is judged that they can be applied to microclimate analysis in urban area. The computational fluid analysis was divided into three areas (low-rise, low and high-rise, and high-rise) centered on the A2 point. On average, the low-rise area was 0.1 to 0.4% higher than the high-rise area. In the low and high-rise area and high-rise area, the pith of buildings are wide, so the airflow is smooth, so it is judged that the temperature is relatively low.

The automatic dust separator is a device installed in the suction tank of the pumping or drainage plant, and prevents foreign substances such as aquatic plants or wood chips from being sucked into the underwater pump. Since the dust separator obstructs the flow of water for separating dusts, a water level difference is likely to occur before and after the dust separator. Since the water level difference before and after the dust separator acts as an additional hydraulic load on the dust separator structure, it may reduce the lifetime of the dust separator and cause damage. In this study, in order to reduce the water level difference, we devised changing the existing I-beam-shaped dust separator parts to a streamlined shape, and quantitatively analyzed the water level difference before and after the dust separator, hydraulic load, and flow velocity distribution through computational fluid analysis to confirm the effect of design improvement.

Micro-climate measurements and computational fluid analysis were conducted to use it as basic data for the preservation and management of the old house of Kim Myung-kwan, a traditional building that is National Folk Cultural Property No. 26. As a result of the actual measurement, the temperature and humidity are relatively evenly distributed indoors unlike outdoors, but the temperature and humidity vary depending on the time change and the installation location in the outdoors. It was found that the temperature increases after dawn and the temperature varies depending on the installation position around 14:00–15:00, when the temperature becomes the highest. In particular, the temperature was high at the outdoor measurement point adjacent to the building and the fence. As a result of the computational fluid analysis, the temperature was high in the buildings and fences in the old house or in the area adjacent to the building, and it was about 1℃ higher than the surrounding area. In this area, it is judged that the thickening of wood will occur more severely than in other locations, and special preservation management is required.

The Moving Particle Semi-implicit (MPS) method is one of most famous method in the particle-based computational fluid dynamics field. The MPS, the state-of-art method, is simple but intuitive methodology including multi-phase and complex structure interactions problems. However, the concept of particle method may contain the physical weakness. In order to avoid physical violence, the particle number density and kernel function were employed. Despite all the efforts, the microscopic problems were not easily resolved yet. In this study, the surface tension model was developed and added into the MPS method to strengthen physical phenomena and physics laws. The simulation result with new MPS method including surface tension model was compared with corresponding theoretical results and they show good-agreement.

In this paper, numerical simulations were conducted to secure both flow distribution and uniform flow discharge through a wall mount type air sterilizer. In order to increase the reliability of the simulation results where there is no well-known validation case for air sterilizer, mesh sensitivity study was performed under the constraint that y+ set to one for k-w SST turbulent modeling for both the air sterilizer and the fan. The installation of various guides and structures was reviewed in the point of flow distribution and pressure drop inside the sterilizer, and the exhaust pressure conditions were predicted to secure uniform flow discharge at outlets. This study has been done based on the computational analysis during the development stage of the air sterilizer, and the results will be verified through physical testing after production of prototype.

Failure to comply with the performance test requirements for the centrifugal pumps at power plants often results in performance dissatisfaction as a result of field tests. This study proposed a method of reducing the uncertainty of the field test results by evaluating the systematic error in the measurement system caused by failure to follow the test requirements using the computational fluid dynamics(CFD) technique. As a result of the evaluation of the systematic error and reflecting it in the performance test data, it was confirmed that the error occurred at a constant rate with respect to the flowrate and that the pump, which showed a difference in performance actually had the same performance.

Valves are one of the indispensable components in modern industry. Filling and de-pressure connectors in rocket valves used for space launch vehicles are very important parts for smooth fluid supply. For this reason, an optimized design that can improve efficiency, miniaturization, weight reduction, and safety of the valve at the same time is required. In this work, flow analysis and structural analysis were performed through 3D modeling using computational numerical analysis for open type filling and de-pressure valves. As results, the flow velocity and pressure distribution of the fluid were analyzed through the flow analysis of valve, and stress distribution was conducted in structural analysis. Through this study, it is consequently expected to provide valves of various specifications by performing production and performance test evaluation of development prototypes.

When operating at high speed on a vessel, a high-speed planing hull occurs nonlinear movements such as stern trim and large sprays. This phenomenon results in the hindrance of stability, embarkation and mission performance. Excessive stern trim during the slides decreases propulsion efficiency and visibility of helmsman due to porpoising and changing the attack angle of the fluid flowing into the propeller. To improve these problems, an outboard floating plate is installed on the cavitation plate to greatly suppress or eliminate the porpoising phenomenon. In this study, to analyze the performance of the floating plate mounted on the outboard engine, numerical analysis was carried out to investigate the resistance applied to the floating plate and the lift generated according to the change of the angle of attack and the flow velocity. The reliability of the floating plate mounted on the outboard engine was verified by applying the floating plate according to the speed and the angle of attack.

블레이드 개발에서 매우 중요한 요소는 에어포일 설계이다. 본 연구에서는 DesignFoil 프로그램을 통한 에어포일의 최적화에 관한 연구를 다룬다. 이를 위해, NACA 4-digit series 및 5-digit series 공식을 이용하여 좌표 값을 도출시키고, 이를 통해 구해진 초기 단면형상을 DesignFoil 프로그램에 입력시킨 뒤, 각 매개 변수(피칭 모멘트, 레이놀즈 수, 마하 수, 두께 비율 및 받음각)에 대하여 양력 대 항력 비율을 최적화시켰다. 그 결과, 에어포일 단면 좌표를 최적화시키고, VisualFoil 프로그램을 통해 에어포일의 성능을 확인하고 블레이드 형상을 결정했다.

국내 자연재난 피해의 50%는 태풍에 의해 발생하며, 최근 태풍에 동반된 강풍에 의한 인명 피해가 빈번하게 발생하고 있다. 재난 피해 저감을 위한 재난 안전 교육의 일환으로 국내의 강풍체험시설은 대부분 제한된 공간에 설치되어 체험을 위한 내부 유동장의 효과적 설계가 필요하다. 이를 위해 본 연구에서는 전산유체역학 기법을 이용하여 강풍 체험장의 내부 유동장을 해석하였으며, 내부 구조 형상으로 인해 발생하는 압력 저항을 공간 저항으로 정의하였다. 기존 강풍 체험장에 대한 분석 결과 기존의 수평 방향 풍로 구조로 인해 매우 불균질한 내부 유동장이 형성되고 큰 공간 저항이 발생함을 확인하였다. 이를 개선하기 위하여 풍로를 수직 방향으 로 변경함으로써 공간 저항을 80% 가까이 감소시킬 수 있음을 확인하였으며, 체험장 내부 유동장의 균질도도 크게 향상되어 실질적 강풍 체험장 구현이 가능함을 확인하였다.

The objectives of this study were to develop the optimal structures of recirculating aquaculture tank for improving the removal efficiency of solid materials and maintaining water quality conditions. Flow analysis was performed using the CFD (computational fluid dynamics) method to understand the hydrodynamic characteristics of the circular tank according to the angle of inclination in the tank bottom (0°, 1.5° and 3°), circulating water inflow method (underwater, horizontal nozzle, vertical nozzle and combination nozzle) and the number of inlets. As the angle in tank bottom increased, the vortex inside the tank decreased, resulting in a constant flow. In the case of the vertical nozzle type, the eddy flow in the tank was greatly improved. The vertical nozzle type showed excellent flow such as constant flow velocity distribution and uniform streamline. The combination nozzle type also showed an internal spiral flow, but the vortex reduction effect was less than the vertical nozzle type. As the number of inlets in the tank increased, problems such as speed reduction were compensated, resulting in uniform fluid flow.

최근 일본의 건축구조기준(AIJ 2015)에서는 CFD 해석을 통한 풍하중 산정을 허용한 바 있다. 이는 컴퓨터의 연산 능력 향상 및 CFD 해석 이론의 발전으로 인해 해석의 결과가 풍동실험의 결과와 유사한 수준에 도달하였음을 뜻한다. 본 연구에서는 먼저 CFD 해석의 이론적 배경을 살펴보고, 일본의 건축구조기준 및 유럽의 과학기술연구 프로그램인 COST에서 권장한 CFD 해석 절차를 토대 로 해석을 진행하였다. 해석 결과의 신뢰성을 검증하기 위해 Tokyo Polytechnic University에서 제공하는 풍동실험 데이터를 사용하였 고, 해석과 실험의 유사성을 평가하기 위하여 형상비가 3, 4, 5일 때의 풍방향하중을 비교하였다.