검색결과

검색조건
좁혀보기
검색필터
결과 내 재검색

간행물

    분야

      발행연도

      -

        검색결과 65

        1.
        2024.04 KCI 등재 구독 인증기관 무료, 개인회원 유료
        PURPOSES : This study sought ways to connect urban above ground roads and underground roads to utilize urban space more efficiently in the development of underground roads, which are currently under development in order to alleviate problems caused by oversaturated above-ground roads. A simulation analysis was performed to develop an operation strategy that connects above-ground and underground roads to prevent congestion in above-ground areas such as entrances and exits from transferring to underground roads as well as to present its effectiveness. METHODS : Traffic efficiency analysis according to the operation strategy of above ground and underground roads was conducted using VISSIM, a microscopic traffic simulation software. The functions implemented in VISSIM were collected to set effectiveness analysis indicators for each underground road operation strategy. The Shinwol-Yeoui Underground Road was selected as the spatial scope of this study, and a surrounding road network was constructed. In addition, full-scale simulation analysis preparations were completed by performing network calibration based on the actual traffic attribute data of underground and surrounding surface roads within the construction scope. Accordingly, a traffic efficiency evaluation analysis was conducted based on the underground road operation strategy. CONCLUSIONS : Information on the increase in traffic volume within the Shinwol-Yeoui underpass was collected every 15 min. The analysis was divided into an analysis of the traffic situation within the underpass through demand control when the service level reached level D and an analysis of when demand control was not performed. It was found that demand control was necessary for the Shinwol-Yeoui Underpass when the internal traffic volume reached 2,500 vehicles/h. In addition, to analyze the spread of traffic and congestion owing to the weaving phenomenon caused by lane changes in the underpass, an analysis was conducted to observe the traffic improvement effect when full lane changes are possible for the Shinwol-Yeoui Underground Road, which currently has some lane-change-permitted sections. The analysis showed that both the maximum traffic volume and average travel speed showed better results when lane changes were allowed, and the communication situation at Yeoui JCT was found optimal.
        5,100원
        4.
        2022.01 KCI 등재 구독 인증기관 무료, 개인회원 유료
        Many piping systems installed in the power plant are directly related to the safety and operation of the plant. Various dampers have been applied to the piping system to reduce the damage caused by earthquakes. In order to reduce the vibration of the piping system, this study developed a steel coil damper (SCD) with a straightforward structure but excellent damping performance. SCD reduces the vibration of the objective structure by hysteretic damping. The new SCD damper can be applied to high-temperature environments since it consists of steel members. The paper introduces a design method for the elastoplastic coil spring, which is the critical element of SCD. The practical applicability of the design procedure was validated by comparing the nonlinear force-displacement curves calculated by design equations with the results obtained from nonlinear finite element analysis and repeated loading test. It was found that the designed SCD’s have a damping ratio higher than 25%. In addition, this study performed a set of seismic tests using a shaking table with an existing piping system to verify the vibration control capacity on the piping system by SCD. Test results prove that the SCD can effectively control the displacement vibration of the piping system up to 80%.
        4,000원
        5.
        2021.12 KCI 등재 구독 인증기관 무료, 개인회원 유료
        This review summarizes the recent progress in iron-oxide-based heat generators. Cancer treatment using magnetic nanoparticles as a heat generator, termed magnetic fluid hyperthermia, is a promising noninvasive approach that has gained significant interest. Most previous studies on improving the hyperthermia effect have focused on the construction of dopant-containing iron oxides. However, their applications in a clinical application can be limited due to extra dopants, and pure iron oxide is the only inorganic material approved by the Food and Drug Administration (FDA). Several factors that influence the heat generation capability of iron-oxide-based nanoparticles are summarized by reviewing recent studies on hyperthermia agents. Thus, our paper will provide the guideline for developing pure iron oxide-based heat generators with high heat dissipation capabilities.
        4,000원
        6.
        2021.12 KCI 등재 구독 인증기관 무료, 개인회원 유료
        대표적인 상업화된 박테리오신인 나이신은 Listeria monocytogenes 및 Staphylococcus aureus와 같은 병원성 세균에 대해 강력한 항균 활성을 보인다. 본 연구에서는 시판되는 나이신 제품을 박테리오파지 SAP84와 함께 병용 처리했을 때 S. aureus 억제에 대한 상승효과에 대하여 평가했다. S. aureus KCTC 3881 균주에 대해 나이신은 농도의존적으로 생균수를 감소시켰으며 18 IU/mL의 나이신은 대조구와 비교하여 6시간째에 4.03 Log CFU/mL의 균수가 감소된 반면, 동일 용량의 나이신이 박테리오파지 SAP84 (0.1 MOI)와 병용처리 되었을 때 5.54 Log CFU/mL의 생균수 감소가 관찰되었다. 또한 나이신과 SAP84 의 조합은 양상추에서 S. aureus 균주를 효과적으로 제어하는데 성공적으로 적용되었다.
        4,000원
        7.
        2021.06 KCI 등재 구독 인증기관 무료, 개인회원 유료
        본 연구에서는 Froude 수 1.0으로 운항하는 길이 약 10m 급 소형 고속선박의 에너지 효율 설계를 위해 선미부에 트림 탭을 부착하였고, 선저 면과의 각도에 따른 항주자세와 저항성능의 변화를 살펴보았다. 성능 해석은 CFD 해석을 통해 수행되었으며, 축척에 의한 영향을 보기 위해 모형선과 실선에 대해 각각 해석을 수행 후 두 결과로부터 예측된 실선의 성능을 비교하였다. 나선에 대한 해석 결과는 두 결과가 전반적으로 유사하였고, 트림 탭이 부착된 경우 선저 면과의 각도가 동일할 때 자세 변화량이 달라 전 저항의 차이로 이어졌지만 자세에 따른 저항 변화 경향은 유사하였다. 이로부터 축척 효과가 있더라도 저항 저감 경향으로부터 최적 항주자세를 찾을 수 있으나, 트림 탭에 의한 자세 변화와 실선 주위 유동의 특성을 알기 위해서는 실선에 대한 직접적인 해석이 필요함을 알 수 있다.
        4,300원
        9.
        2020.07 KCI 등재 구독 인증기관 무료, 개인회원 유료
        This study was conducted to provide a basis for raising farm income by increasing the yield and extending the cultivation period by creating an environment where crops can be cultivated normally during high temperatures in summer. The maximum cooling load of the multi-span greenhouse with a floor area of 504 m2 was found to be 462,609 W, and keeping the greenhouse under 32°C without shading the greenhouse at a high temperature, it was necessary to fog spray 471.6 L of water per hour. The automatic fog cooling control device was developed to effectively control the fog device, the flow fan, and the light blocking device constituting the fog cooling system. The fog cooling system showed that the temperature of the greenhouse could be lowered by 6°C than the outside temperature. The relative humidity of the fog-cooled greenhouse was 40-80% during the day, about 20% higher than that of the control greenhouse, and this increase in relative humidity contributed to the growth of cucumbers. The relative humidity of the fog cooling greenhouse during the day was 40-80%, which was about 20% higher than that of the control greenhouse, and this increase in relative humidity contributed to the growth of cucumbers. The yield of cucumbers in the fog-cooled greenhouse was 1.8 times higher in the single-span greenhouse and two times higher in the multi-span greenhouse compared to the control greenhouse.
        4,300원
        10.
        2020.05 KCI 등재 구독 인증기관 무료, 개인회원 유료
        In this study, a controlled atmosphere (CA) storage system is proposed as a storage method for prolonging processing period. Persimmon was placed in CA storage at 0.5oC±0.5 for 92 d. The qualities of the stored persimmons were compared to determine the possibility of extending shelf life. ‘Sangjudungsi,’ which was harvested on October 26, 2017, was applied to the persimmons. In order to compare differences according to size, the persimmons were classified into Size No. 2 (170 g) and Size No. 3 (145 g). In the result, the yellowness of CA-stored persimmons was 26.3% lower than that of cold-stored ones, confirming that after-ripening was delayed. The firmness of CAstored and Size No. 3 persimmon was higher than that of cold-stored and Size No. 2 persimmon. Tannin decreased significantly in cold storage, but it tended to increase in CA storage. The sugar content of Size No. 3 was lower than that of Size No. 2, but there was no difference in tendencies according to the storage method. Weight loss in CA storage was lower than that in cold storage. A comparison of color difference, firmness, sugar content, tannin, and weight loss ratio showed that CA storage was more effective in improving shelf life than cold storage.
        4,000원
        11.
        2020.03 KCI 등재 구독 인증기관 무료, 개인회원 유료
        유해 남조류 Microcystis 종에 의한 녹조현상은 매년 빈번하게 일어나며, 이로 인한 수자원의 질적 변화와 먹는 물 확보에 문제가 발생하고 있다. Microcystis 종에 의한 피해를 막고자 개발된 naphthoquinone (NQ) 유도체 물질의 장점 분석을 위해 국내에서 빈번히 사용되는 황토를 이용한 microcosm 실험을 하고자 하였다. 그 결과, NQ 40, NQ 2-0 물질은 선행 연구 결과와 동일하게 유해 남조류 Microcystis 종을 선택적으로 99.9%, 99.6% 제어했으며, 식물플랑크톤 종 다양성을 증진시켰다. 그러나, 황토를 처리한 실험구는 실험 초기 일시적인 조류 제어효과를 보인 후 다시 증가하였으며, 유용 조류를 포함한 모든 식물플랑크톤에게 적용되어 다른 조류의 성장은 이루어지지 않았다. 뿐만 아니라, NQ 물질을 처리한 처리구는 비생물학적, 생물학적요인 모두 영향을 미치지 않았으며, 대조구와 유사한 경향이 관찰되었다. 따라서, 최종적으로 개량된 유해 남조류 제어물질 NQ 2-0은 높은 살조효과, 선택적 제어효과, 저독성, 자연분해에 의한 비잔류성 뿐만 아니라, 편의성 및 경제성까지 갖춘 새로운 살조물질로서 현재까지 개발된 살조물질 보다 현장 생태계 적용에 가장 적합한 친환경 녹조제어 물질이라고 판단된다.
        4,500원
        12.
        2020.02 KCI 등재 구독 인증기관 무료, 개인회원 유료
        리튬 덴드라이트의 효과적인 억제를 위해 유/무기 복합체를 리튬메탈 전극의 보호층으로 사용하였다. 유기물로는 PVDF-HFP가 사용되었으며 무기물로는 TiO2가 사용되었다. 유기물로 사용된 PVDF-HFP는 높은 유연성을 가지는 고분자로서 무기물의 matrix 역할을 하며, 무기물로 사용된 TiO2 나노입자는 보호막의 기계적 강도와 이온전도성을 향상시켜주는 역할을 하였다. 합성된 보호막은 SEM, AFM, XRD를 통하여 PVDF-HFP matrix에 TiO2가 잘 분산되어 있는 형태인 것을 확인할 수 있 었다. 또한 전기화학적 분석 결과, 향상된 기계적 물성과 이온전도성으로 인해 polymer-inorganic composite은 비교 샘플(untreated 와 PVDF-HFP 보호층) 대비 100번째 사이클까지 80%의 높은 쿨롱 효율 및 20 mV 미만의 낮은 과전압을 나타내었다.
        4,000원
        13.
        2019.06 KCI 등재 SCOPUS 구독 인증기관 무료, 개인회원 유료
        In the present study, vanadium oxide(V2O5) films for electrochromic(EC) application are fabricated using sol-gel spin coating method. In order to optimize the EC performance of the V2O5 films, we adjust the amounts of polyvinylpyrrolidone(PVP) added to the solution at 0, 5, 10, and 15 wt%. Due to the effect of added PVP on the V2O5 films, the obtained films show increases of film thickness and crystallinity. Compared to other samples, optimum weight percent(10 wt%) of PVP led to superior EC performance with transmittance modulation(45.43 %), responding speeds(6.0 s at colored state and 6.2 s at bleached state), and coloration efficiency(29.8 cm2/C). This performance improvement can be mainly attributed to the enhanced electrical conductivity and electrochemical activity due to the increased crystallinity and thickness of the V2O5 films. Therefore, V2O5 films fabricated with optimized amount of PVP can be a promising EC material for high-performance EC devices.
        4,000원
        14.
        2019.03 KCI 등재 SCOPUS 구독 인증기관 무료, 개인회원 유료
        To improve the performance of carbon nanofibers as electrode material in electrical double-layer capacitors (EDLCs), we prepare three types of samples with different pore control by electrospinning. The speciments display different surface structures, melting behavior, and electrochemical performance according to the process. Carbon nanofibers with two complex treatment processes show improved performance over the other samples. The mesoporous carbon nanofibers (sample C), which have the optimal conditions, have a high sepecific surface area of 696 m2 g−1, a high average pore diameter of 6.28 nm, and a high mesopore volume ratio of 87.1%. In addition, the electrochemical properties have a high specific capacitance of 110.1 F g−1 at a current density of 0.1 A g−1 and an excellent cycling stability of 84.8% after 3,000 cycles at a current density of 0.1 A g−1. Thus, we explain the improved electrochemical performance by the higher reaction area due to an increased surface area and a faster diffusion path due to the increased volume fraction of the mesopores. Consequently, the mesoporous carbon nanofibers are demonstrated to be a very promising material for use as electrode materials of high-performance EDLCs.
        4,000원
        15.
        2019.02 KCI 등재 구독 인증기관 무료, 개인회원 유료
        BSA 용액의 전량 한외여과에서 막모듈의 중력에 대한 경사각(0~180°) 변화에 따라 유발된 자연대류 불안정 흐름 (natural convection instability flow; NCIF)의 막오염 제어 효과를 플럭스 증가 정도로 측정하고 막힘여과 모델로 해석하였다. 막모듈의 경사각이 0°에서 180°로 커질수록 NCIF 유발이 증가하여 막오염 제어 효과가 커져 플럭스가 증가하였다. NCIF의 유발이 가장 큰 경사각 180°에서의 플럭스 값을 NCIF의 유발이 없는 0°에서의 값과 비교한 결과, 2시간의 단기간 운전에서는 플럭스 향상성이 5배, 20시간의 장기간 운전에서는 17배까지 증가하였다. 막힘여과 모델을 적용하여 NCIF의 유발에 따른 플럭스 증가 효과를 해석한 결과, 운전시간 15분 이내에서는 중간막힘 모델 그 이후에는 케이크여과 모델로 해석하는 것이 타당하였다. 막모듈 경사각 180°에서 유발된 NCIF는 15분 이내의 운전 초기에는 중간막힘 오염을 67%까지 감소시키고, 그 이후의 운전 시간에서는 케이크층 오염을 99.9%까지 감소시켰다. 따라서 막모듈에 유발된 NCIF의 주된 막오염 제어 기작은 케이크층 형성을 억제시키는 것이었다.
        4,300원
        16.
        2018.06 KCI 등재 SCOPUS 구독 인증기관 무료, 개인회원 유료
        Needle-like NiO protecting layers on NiCrAl alloy foam, used as support for hydrogen production, are introduced through electroplated Ni and subsequent microwave annealing. To improve the stability of the NiCrAl alloy foam, oxygen concentration of microwave annealing to form a needle-like NiO layer with good chemical stability and corrosion resistance is controlled in a range of 20 and 50 %. As the oxygen concentration increases to 50 %, needle-like NiO forms a dense coating layer on the NiCrAl alloy foam; this layer formation can be attributed to accelerated growth of the (200) plane. In addition, the increased oxygen concentration causes increased NiO/Ni ratio of the resultant coating layer on NiCrAl alloy foam due to improved rate of the oxidation reaction. As a result, the introduction of dense needle-like NiO layers formed at 50 % oxygen concentration improves the chemical stability of the NiCrAl alloy foam by protecting the direct electrochemical reaction between the electrolyte and the foam. Thus, needle-like NiO can be proposed as a superb protecting layer to improve the chemical stability of NiCrAl alloy form.
        4,000원
        17.
        2018.06 KCI 등재 구독 인증기관 무료, 개인회원 유료
        Corrosion inhibitors including calcium hydroxide have been used to prevent corrosion in the pipes for tap water supply. The corrosion index (i.e., Langelier Index) differs by area and water quality. The corrosion indices of the areas studied differed by more than 2.0. The ‘homogenized’ calcium hydroxide was added to the treated water at the K water treatment plant, in order to increase the value of the corrosion index and the concentration of calcium. As the result, the concentration of calcium was increased while the turbidity and pH changed little. The corrosion rate of the tap water with the 'homogenized' calcium hydroxide could be slowed down pretty much. The results suggested that the technology of 'homogenization' of calcium hydroxide can applied to tap water and desalinated water to prevent corrosion in water pipes even in corrosive pipes.
        4,000원
        18.
        2018.04 KCI 등재 구독 인증기관 무료, 개인회원 유료
        Applicability of corrosion inhibitor was evaluated using pilot scale water distribution pipe simulator. Calcium hydroxide was used as corrosion inhibitor and the corrosion indices of the water were investigated. Corrosion indices, Langelier saturation index (LI) increased by 0.8 and calcium carbonate precipitation potential (CCPP) increased by 9.8 mg/L. This indicated that corrosivity of water decreased by corrosion inhibitor and the effects lasted for 18 days. Optimum calcium hydroxide dose was found to be 3~5 mg/L for corrosion inhibition. We suggest that monitoring of CCPP as well as LI need to be conducted to control corrosivity of water.
        4,000원
        19.
        2018.04 KCI 등재 구독 인증기관 무료, 개인회원 유료
        In the present study, we investigate the effects of milling time and the addition of a process control agent (PCA) on the austenite stability of a nanocrystalline Fe-7%Mn alloy by XRD analysis and micrograph observation. Nanocrystalline Fe-7%Mn alloys samples are successfully fabricated by spark plasma sintering. The crystallite size of ball-milled powder and the volume fraction of austenite in the sintered sample are calculated using XRD analysis. Changes in the shape and structure of alloyed powder according to milling conditions are observed through FE-SEM. It is found that the crystallite size is reduced with increasing milling time and amount of PCA addition due to the variation in the balance between the cold-welding and fracturing processes. As a result, the austenite stability increased, resulting in an exceptionally high volume fraction of austenite retained at room temperature.
        4,000원
        1 2 3 4